From owner-freebsd-net Mon Aug 31 04:14:00 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id EAA02728 for freebsd-net-outgoing; Mon, 31 Aug 1998 04:14:00 -0700 (PDT) (envelope-from owner-freebsd-net@FreeBSD.ORG) Received: from labinfo.iet.unipi.it (labinfo.iet.unipi.it [131.114.9.5]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id EAA02721 for ; Mon, 31 Aug 1998 04:13:58 -0700 (PDT) (envelope-from luigi@labinfo.iet.unipi.it) Received: from localhost (luigi@localhost) by labinfo.iet.unipi.it (8.6.5/8.6.5) id LAA07622; Mon, 31 Aug 1998 11:17:29 +0200 From: Luigi Rizzo Message-Id: <199808310917.LAA07622@labinfo.iet.unipi.it> Subject: picobsd+bridging To: net@FreeBSD.ORG Date: Mon, 31 Aug 1998 11:17:29 +0200 (MET DST) X-Mailer: ELM [version 2.4 PL23] Content-Type: text Sender: owner-freebsd-net@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, for those who want to try the bridging code without messing up with compiles etc, i have put up a picobsd version (based on 2.2.6) with bridging enabled -- it supports various cards natively and it boots up with userconfig. Do whatever card config you need (or just type "quit"), then the system boots up with bridging enabled. http://www.iet.unipi.it/~luigi/picobdg980831.bin (it's a picobsd image, 1.44MB, dd it to a floppy and boot from it). Support is for the following cards: ed tested lnc tested de tested fxp untested -- feedback required cheers luigi -----------------------------+-------------------------------------- Luigi Rizzo | Dip. di Ingegneria dell'Informazione email: luigi@iet.unipi.it | Universita' di Pisa tel: +39-50-568533 | via Diotisalvi 2, 56126 PISA (Italy) fax: +39-50-568522 | http://www.iet.unipi.it/~luigi/ _____________________________|______________________________________ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message