From owner-freebsd-isdn  Sun Jun  6 18:59:10 1999
Delivered-To: freebsd-isdn@freebsd.org
Received: from xenetserver.harz.de (xenetserver.harz.de [193.159.181.125])
	by hub.freebsd.org (Postfix) with ESMTP id F073214D87
	for <freebsd-isdn@freebsd.org>; Sun,  6 Jun 1999 18:59:06 -0700 (PDT)
	(envelope-from frank@vogon.agala.harz.de)
Received: (from uucp@localhost)
	by xenetserver.harz.de (8.9.1/8.9.1) with UUCP id DAA07537
	for freebsd-isdn@freebsd.org; Mon, 7 Jun 1999 03:59:06 +0200 (CEST)
Received: (from frank@localhost)
	by vogon.agala.harz.de (8.9.3/8.8.8) id WAA52733
	for freebsd-isdn@freebsd.org; Sun, 6 Jun 1999 22:05:35 +0200 (CEST)
	(envelope-from frank)
Date: Sun, 6 Jun 1999 22:05:35 +0200
From: "Frank J. Beckmann" <frank@vogon.agala.harz.de>
To: freebsd-isdn@freebsd.org
Subject: Re: ELSA MicroLink ISDN/PCF
Message-ID: <19990606220535.A52112@vogon.agala.harz.de>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
X-Mailer: Mutt 0.94.14i
X-Address: Frank J. Beckmann, Steinkampring 16, D-38667 Bad Harzburg
X-Phone: +49-5322-80008
X-Fax: +49-5322-80082
X-PGP-Fingerprint: (1024R/66DC397D) = 25 34 D7 8A 69 04 12 CA  6E 55 DD 63 F6 A3 0E 06
Sender: owner-freebsd-isdn@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

In article <MSGID_242=3A7600=2F1_3758dc75@Fido.DE> you wrote:
> FJB> what option and device line do I need to get an ELSA MicroLink 
> FJB> ISDN/PCF working with i4b in 3.2-STAVBLE?
>
> FJB>         options "ELSA_ISDNMC"
>
>That won't work. If anything would work, then this:

It was just a guess. i4b in 3.2-STAVBLE is still 0.71 which doesn't
support my card.

>options "ELSA_PCC16"
>device isic0 at isa? port 0x360 net irq 5 flags 19 vector isicintr

I got i4b 0.81 which supports "ELSA_PCC16" and my card works now. :-)

>The PCF is the same board as the PCC with added Fax functionality (which i4b
>cannot use anyway). Although Gary suggested it wouldn't work, I would give it a
>try. Perhaps you have to look in the code and copy code from the PCC section to
>the PCF section, if that distinction should be made anywhere.

Are the PCF and PCC really different in hardware or only in software,
and what are the 2 LEDs for?

I get a lot messages:

	i4b-L1-isicintr: WARNING: unit 0, No IRQ from HSCX/ISAC!

but systat shows about 260 ips on irq 5 when I download something from
the net, so I guess only some interrupts get lost. My system is based
on an Intel DK440LX with 2 PII 333. I tryed

	options	"I4B_SMP_WORKAROUND"

but it doesn't help.

Frank


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message