From owner-freebsd-isp@FreeBSD.ORG Sun Mar 27 21:43:45 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3B26B16A4CE for ; Sun, 27 Mar 2005 21:43:45 +0000 (GMT) Received: from unsane.co.uk (unsane.co.uk [62.140.220.90]) by mx1.FreeBSD.org (Postfix) with ESMTP id 86E9243D1F for ; Sun, 27 Mar 2005 21:43:41 +0000 (GMT) (envelope-from jhary@unsane.co.uk) Received: from canth ([10.0.0.10]) (authenticated bits=0) by unsane.co.uk (8.13.3/8.13.3) with ESMTP id j2RLhXXj072890; Sun, 27 Mar 2005 22:43:38 +0100 (BST) (envelope-from jhary@unsane.co.uk) Message-Id: <200503272143.j2RLhXXj072890@unsane.co.uk> From: "Vince" To: "'Suporte Matik'" , Date: Sun, 27 Mar 2005 22:43:38 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook, Build 11.0.5510 In-reply-to: <200503261429.09441.asstec@matik.com.br> Thread-Index: AcUyKXW4vQGJiZ/hT26fWeQfcdo4dgAOgjBQ X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 Subject: RE: Network oriented services with FreeBSD X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 27 Mar 2005 21:43:45 -0000 > -----Original Message----- > From: owner-freebsd-isp@freebsd.org > [mailto:owner-freebsd-isp@freebsd.org] On Behalf Of Suporte Matik > Sent: 26 March 2005 17:29 > To: freebsd-isp@freebsd.org > Subject: Re: Network oriented services with FreeBSD > > On Saturday 26 March 2005 11:53, Bob Martin wrote: > > We do all of our routing and firewalls with FreeBSD, instead of > > dedicated equipment like Cisco. In short, a Xeon based PC > (we're using > > mostly ~2ghz, single processor boxen) that can be bought > for less than > > a $1000 will do almost anything a $15,000 dollar name brand router > > will do. And it will do a few things the named brand units > wont, like > > traffic analysis. Instead of having the dedicated equipment and a > > server, we just have a server. > > > > Hi > probably not a fair comparism since your $15K router will > have some pretty clever interfaces which you possible do not > get or at least have to buy to put them into your PC and > configure them if you can. > Lots of things IOS can do FreeBSd can still not, as CEF, > class maps, loadbalance, backuproute, VoIP to call only some > IMO BGP with Zebra on FBSD also is not close and reliable > enough to CISCO BGP . > So what you say may be ok for a simple router with some > functions but a cisco 2xxx does not cost 15k but all depends > on size of the network. May be an ISP with a small link does > it well without dedicated router but if you talk about > network services I don't know ... > And don't forget the disks, I will not even think about if a > HD crashes on a network router. I have some Ciscos running a > couple of years now without touching them. > Hans Disks are not too much of an issue as with some tweaking you can either A) nfs boot your freebsd router from redundant sources B) use pcmcia or similar solid state filesystem C) use software/hardware mirroring. And the one time a freebsd box I had had a hard disk failure it stayed up Untill I replaced it anyway as it had minimal disk usage. Also with most of the hardware routers its not the hardware that costs Its support and upgrades. I've had freebsd Firewalls run for at least 3 years with no reboot so uptime is hardly an issue. I havent ever had to have a router run that long As I'm quite new to the ISP rather than end user side of things. Vince > > _______________________________________________________ > _______________________________________________ > freebsd-isp@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-isp > To unsubscribe, send any mail to "freebsd-isp-unsubscribe@freebsd.org" > From owner-freebsd-isp@FreeBSD.ORG Mon Mar 28 15:55:35 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8DC4016A573 for ; Mon, 28 Mar 2005 15:55:34 +0000 (GMT) Received: from pimout2-ext.prodigy.net (pimout2-ext.prodigy.net [207.115.63.101]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7C46C43D1F for ; Mon, 28 Mar 2005 15:55:33 +0000 (GMT) (envelope-from stormspotter@6Texans.net) Received: from jacob.6texans.net (adsl-68-78-160-106.dsl.rcfril.ameritech.net [68.78.160.106])j2SFtWMW404926 for ; Mon, 28 Mar 2005 10:55:32 -0500 Date: Mon, 28 Mar 2005 09:55:31 -0600 From: Jacob S To: freebsd-isp@freebsd.org Message-ID: <20050328095531.15dd5890@jacob.6texans.net> X-Mailer: Sylpheed-Claws 1.0.1 (GTK+ 1.2.10; i386-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: Bind & cPanel X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 28 Mar 2005 15:55:35 -0000 Ok, since I noticed a couple other people saying they use cPanel in a different thread, I thought I would go ahead and ask my question here. I'm maintaining a FreeBSD 5.3 box that's running cPanel, Apache 1.3, Bind 9.xx, Qmail/Exim and friends. (Yes, the mail server is a little bit of an odd setup. Exim is a 'catchall' and Qmail is just for transferring mail to a second server that does the real sending.) The problem is that Bind has crashed on us twice now, presumably from changes that cPanel makes during it's nightly update. One time it was using a config file pointing to another file outside the chroot, the other time Bind was installed in /usr/local/sbin, instead of /usr/sbin so the start script in /etc/rc.d would not work any more. I'm really starting to dislike cPanel by this point, but we need it for the time being because of it's "user-friendliness" for customers on the server. First, I'm having trouble getting Bind to install itself in /usr/sbin again even after a fresh make clean, make all, etc. from the ports. The Makefile looks correct compared to another FreeBSD server with Bind that's not using cPanel. What am I missing? Second, how do people prevent cPanel from messing things up? Since we watch the software for security updates and keep everything up to date, is there an easy way to disable cPanel's intrusive 'updates'? Many thanks for any helpful tips or hints anyone can offer. Jacob From owner-freebsd-isp@FreeBSD.ORG Mon Mar 28 20:53:03 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DA46816A4CE for ; Mon, 28 Mar 2005 20:53:03 +0000 (GMT) Received: from miramanee.icarz.com (miramanee.icarz.com [207.99.22.55]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4A3E043D1F for ; Mon, 28 Mar 2005 20:53:03 +0000 (GMT) (envelope-from kenfreebsd@icarz.com) Received: from deanna.icarz.com (deanna.icarz.com [207.99.22.19]) by miramanee.icarz.com (8.13.1/8.13.1) with ESMTP id j2SKqxIH022435; Mon, 28 Mar 2005 15:52:59 -0500 (EST) (envelope-from kenfreebsd@icarz.com) Received: from kenxp (netb-138.icarz.com [209.123.219.138]) by deanna.icarz.com (8.12.11/8.12.9) with SMTP id j2SKqpag029827; Mon, 28 Mar 2005 15:52:55 -0500 (EST) (envelope-from kenfreebsd@icarz.com) Message-ID: <091a01c533d8$1f8eec60$8adb7bd1@icarz.com> From: "Ken Menzel" To: "Vince" , "'Suporte Matik'" , References: <200503272143.j2RLhXXj072890@unsane.co.uk> Date: Mon, 28 Mar 2005 15:52:46 -0500 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.2180 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 X-Spam-Score: -100 () USER_IN_WHITELIST X-Scanned-By: MIMEDefang 2.39 Subject: Re: Network oriented services with FreeBSD X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: Ken Menzel List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 28 Mar 2005 20:53:04 -0000 ----- Original Message ----- From: "Vince" To: "'Suporte Matik'" ; Sent: Sunday, March 27, 2005 4:43 PM Subject: RE: Network oriented services with FreeBSD > > >> -----Original Message----- >> From: owner-freebsd-isp@freebsd.org >> [mailto:owner-freebsd-isp@freebsd.org] On Behalf Of Suporte Matik >> Sent: 26 March 2005 17:29 >> To: freebsd-isp@freebsd.org >> Subject: Re: Network oriented services with FreeBSD >> >> On Saturday 26 March 2005 11:53, Bob Martin wrote: >> > We do all of our routing and firewalls with FreeBSD, instead of >> > dedicated equipment like Cisco. In short, a Xeon based PC >> (we're using >> > mostly ~2ghz, single processor boxen) that can be bought >> for less than >> > a $1000 will do almost anything a $15,000 dollar name brand >> > router >> > will do. And it will do a few things the named brand units >> wont, like >> > traffic analysis. Instead of having the dedicated equipment and a >> > server, we just have a server. >> > >> >> Hi >> probably not a fair comparism since your $15K router will >> have some pretty clever interfaces which you possible do not >> get or at least have to buy to put them into your PC and >> configure them if you can. >> Lots of things IOS can do FreeBSd can still not, as CEF, >> class maps, loadbalance, backuproute, VoIP to call only some >> IMO BGP with Zebra on FBSD also is not close and reliable >> enough to CISCO BGP . >> So what you say may be ok for a simple router with some >> functions but a cisco 2xxx does not cost 15k but all depends >> on size of the network. May be an ISP with a small link does >> it well without dedicated router but if you talk about >> network services I don't know ... >> And don't forget the disks, I will not even think about if a >> HD crashes on a network router. I have some Ciscos running a >> couple of years now without touching them. >> Hans > > > Disks are not too much of an issue as with some tweaking you can > either > A) nfs boot your freebsd router from redundant sources > B) use pcmcia or similar solid state filesystem > C) use software/hardware mirroring. > And the one time a freebsd box I had had a hard disk failure it > stayed up > Untill I replaced it anyway as it had minimal disk usage. > > Also with most of the hardware routers its not the hardware that > costs > Its support and upgrades. I've had freebsd Firewalls run for at > least > 3 years with no reboot so uptime is hardly an issue. I havent ever > had > to have a router run that long As I'm quite new to the ISP rather > than > end user side of things. > > > Vince > http://www.freesbie.org/ Even better than mirroring get rid of the hard drive completely with a bootable CD-image currently based on FreeBSD 5.3. FreeSBIE is a LiveCD based on the FreeBSD Operating system, or even easier, a FreeBSD-based operating system that works directly from a CD, without touching your hard drive. Ken From owner-freebsd-isp@FreeBSD.ORG Tue Mar 29 14:41:31 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3750016A4CE for ; Tue, 29 Mar 2005 14:41:31 +0000 (GMT) Received: from mx2.duracom.net (mx2.duracom.net [65.66.8.5]) by mx1.FreeBSD.org (Postfix) with ESMTP id 02C6E43D1D for ; Tue, 29 Mar 2005 14:41:31 +0000 (GMT) (envelope-from kris.mcelroy@duracom.net) Received: from duracom.net (mail.duracom.net [65.66.8.3]) by mx2.duracom.net (Postfix) with ESMTP id 248A2D54D2 for ; Tue, 29 Mar 2005 08:50:44 -0600 (CST) (envelope-from kris.mcelroy@duracom.net) Received: from KrisLaptop [65.66.11.103] by duracom.net with ESMTP (SMTPD32-8.05) id A9121E430238; Tue, 29 Mar 2005 08:41:22 -0600 From: "Kris McElroy" To: Date: Tue, 29 Mar 2005 08:40:38 -0600 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook, Build 11.0.6353 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1441 Thread-Index: AcU0bUX1uiFI0R32SUKyEHTxoqssLQ== Message-Id: <200503290841894.SM01232@KrisLaptop> X-Declude-Sender: kris.mcelroy@duracom.net [65.66.11.103] X-Declude-Spoolname: D69121e43023852ae.SMD Subject: DansGuardian X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Mar 2005 14:41:31 -0000 Is anyone on this list using DansGuardian? If so what are your thoughts, is there something better to use or anything I should know about before deploying it? We are in the process of buying another company and they have these boxes deployed in schools and we will be taking them over. Thanks, Kris From owner-freebsd-isp@FreeBSD.ORG Tue Mar 29 16:13:57 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0F08616A4CE for ; Tue, 29 Mar 2005 16:13:57 +0000 (GMT) Received: from mailtest.sd73.bc.ca (smtp.sd73.bc.ca [142.24.13.149]) by mx1.FreeBSD.org (Postfix) with ESMTP id B4BA843D31 for ; Tue, 29 Mar 2005 16:13:54 +0000 (GMT) (envelope-from fcash-ml@sd73.bc.ca) Received: from localhost (localhost [127.0.0.1]) by mailtest.sd73.bc.ca (Postfix) with ESMTP id 376A6F2E01 for ; Tue, 29 Mar 2005 08:13:54 -0800 (PST) Received: from mailtest.sd73.bc.ca ([127.0.0.1]) by localhost (mailtest.sd73.bc.ca [127.0.0.1]) (amavisd-new, port 10024) with LMTP id 75762-01-54 for ; Tue, 29 Mar 2005 08:13:53 -0800 (PST) Received: from s9.sbo (s9.sbo [192.168.0.9]) by mailtest.sd73.bc.ca (Postfix) with ESMTP id 66EB2F2882 for ; Tue, 29 Mar 2005 08:13:53 -0800 (PST) From: Freddie Cash Organization: School District 73 To: freebsd-isp@freebsd.org Date: Tue, 29 Mar 2005 08:13:56 -0800 User-Agent: KMail/1.8 References: <200503290841894.SM01232@KrisLaptop> In-Reply-To: <200503290841894.SM01232@KrisLaptop> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200503290813.56984.fcash-ml@sd73.bc.ca> X-Virus-Scanned: by amavisd-new using ClamAV at sd73.bc.ca Subject: Re: DansGuardian X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Mar 2005 16:13:57 -0000 On March 29, 2005 06:40 am, Kris McElroy wrote: > Is anyone on this list using DansGuardian? If so what are your > thoughts, is there something better to use or anything I should know > about before deploying it? We are in the process of buying another > company and they have these boxes deployed in schools and we will be > taking them over. We've been running it for over 3 years now with great success. The teachers and administrators love it. The students hate it. :) What more could you want? :) It's a great web content filter, it's under active development, it's easy to understand and administer. It has an easy-to-understand log format. And it's almost bulletproof. Plus, there's an actively maintained port in the ports tree. ;) -- Freddie Cash, CLCP CNCP Network Support / Helpdesk School District 73 (250) 377-4357 fcash-ml@sd73.bc.ca From owner-freebsd-isp@FreeBSD.ORG Wed Mar 30 03:06:14 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 51F3916A4CF for ; Wed, 30 Mar 2005 03:06:14 +0000 (GMT) Received: from wproxy.gmail.com (wproxy.gmail.com [64.233.184.207]) by mx1.FreeBSD.org (Postfix) with ESMTP id EEBB443D2F for ; Wed, 30 Mar 2005 03:06:12 +0000 (GMT) (envelope-from kstalledo@gmail.com) Received: by wproxy.gmail.com with SMTP id 71so7190wra for ; Tue, 29 Mar 2005 19:06:11 -0800 (PST) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:references; b=B1GlAkJRKheYb/1tMb6Jeij1gn7t4LGq6D/XZ4md1HAmegXI/qI4tgy9qfoLilVhPO39SLhtSDVAtmUtnd9XJG4zMn9e8Mr7tf4If6MMKztaQxN6gSZSstf6AeseL+D2aPpHX61OmQwT6k3T1g6WR+LSi6nkcRv7hIQfLpQF3ic= Received: by 10.54.52.69 with SMTP id z69mr16150wrz; Tue, 29 Mar 2005 19:06:11 -0800 (PST) Received: by 10.54.16.77 with HTTP; Tue, 29 Mar 2005 19:06:11 -0800 (PST) Message-ID: Date: Wed, 30 Mar 2005 11:06:11 +0800 From: "Kahlil Erwin S. Talledo" To: Freddie Cash In-Reply-To: <200503290813.56984.fcash-ml@sd73.bc.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit References: <200503290841894.SM01232@KrisLaptop> <200503290813.56984.fcash-ml@sd73.bc.ca> cc: freebsd-isp@freebsd.org Subject: Re: DansGuardian X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: "Kahlil Erwin S. Talledo" List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 30 Mar 2005 03:06:14 -0000 I have the same sentiments over DansGuardian... :) really good! been using it for serveral years now... You can never go wrong with it. :) On Tue, 29 Mar 2005 08:13:56 -0800, Freddie Cash wrote: > On March 29, 2005 06:40 am, Kris McElroy wrote: > > Is anyone on this list using DansGuardian? If so what are your > > thoughts, is there something better to use or anything I should know > > about before deploying it? We are in the process of buying another > > company and they have these boxes deployed in schools and we will be > > taking them over. > > We've been running it for over 3 years now with great success. The > teachers and administrators love it. The students hate it. :) What more > could you want? :) > > It's a great web content filter, it's under active development, it's easy > to understand and administer. It has an easy-to-understand log format. > And it's almost bulletproof. > > Plus, there's an actively maintained port in the ports tree. ;) > > -- > Freddie Cash, CLCP CNCP Network Support / Helpdesk > School District 73 (250) 377-4357 > fcash-ml@sd73.bc.ca > _______________________________________________ > freebsd-isp@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-isp > To unsubscribe, send any mail to "freebsd-isp-unsubscribe@freebsd.org" > -- # K a h l i l E r w i n S . T a l l e d o # Systems/Network Manager # Riverside Medical Center, Inc. # # (P) BS Aquino Drive, Bacolod City 6100, PH # (T) 63.34.4337331.3131 # (M) 63.916.9247437 # (Y!) kinuxxx@yahoo.com # (MSN) kahliltalledo@hotmail.com From owner-freebsd-isp@FreeBSD.ORG Wed Mar 30 12:01:57 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6CADE16A4F1 for ; Wed, 30 Mar 2005 12:01:57 +0000 (GMT) Received: from complx.LF.net (complx.LF.net [212.9.190.63]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2192943D5C for ; Wed, 30 Mar 2005 12:01:57 +0000 (GMT) (envelope-from lists@complx.LF.net) Received: from lists by complx.LF.net with local (Exim 4.43) id 1DGbtT-0004nc-Nn for freebsd-isp@freebsd.org; Wed, 30 Mar 2005 14:01:55 +0200 Date: Wed, 30 Mar 2005 14:01:55 +0200 From: Kurt Jaeger To: freebsd-isp@freebsd.org Message-ID: <20050330120155.GX60920@complx.LF.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Subject: Flash Communication Server (linuxpart) under FreeBSD ? X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 30 Mar 2005 12:01:57 -0000 Hi! There's a server component of the Macromedia Flash Communication Server, which is available for Linux. Has anyone any experience with that running in the linux emu ? -- MfG/Best regards, Kurt Jaeger 15 years to go ! LF.net GmbH fon +49 711 90074-23 pi@LF.net Ruppmannstr. 27 fax +49 711 90074-33 D-70565 Stuttgart mob +49 171 3101372 From owner-freebsd-isp@FreeBSD.ORG Thu Mar 31 05:20:25 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CB3F616A4CE for ; Thu, 31 Mar 2005 05:20:25 +0000 (GMT) Received: from smtp4.wlink.com.np (smtp4.wlink.com.np [202.79.32.87]) by mx1.FreeBSD.org (Postfix) with SMTP id 5B3A343D1D for ; Thu, 31 Mar 2005 05:20:22 +0000 (GMT) (envelope-from bikrant_ml@wlink.com.np) Received: (qmail 18004 invoked from network); 31 Mar 2005 05:20:19 -0000 Received: from unknown (HELO qmail-scanner.wlink.com.np) (202.79.32.74) by 0 with SMTP; 31 Mar 2005 05:20:19 -0000 Received: (qmail 44888 invoked by uid 1008); 31 Mar 2005 05:20:19 -0000 Received: from bikrant_ml@wlink.com.np by qmail-scanner.wlink.com.np by uid 1002 with qmail-scanner-1.20 (clamscan: 0.70. Clear:RC:1(202.79.32.76):. Processed in 0.010215 secs); 31 Mar 2005 05:20:19 -0000 Received: from smtp1.wlink.com.np (202.79.32.76) by qmail-scanner.wlink.com.np with SMTP; 31 Mar 2005 05:20:19 -0000 Received: (qmail 8011 invoked by uid 508); 31 Mar 2005 05:20:19 -0000 Received: from [202.79.36.168] (HELO bikrant.wlink.com.np) by smtp1.wlink.com.np (qmail-smtpd) with SMTP; 31 Mar 2005 05:20:09 -0000 (Thu, 31 Mar 2005 11:05:09 +0545) From: Bikrant Neupane To: freebsd-isp@freebsd.org User-Agent: KMail/1.7.2 MIME-Version: 1.0 Content-Disposition: inline Date: Thu, 31 Mar 2005 11:04:57 +0545 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <200503311104.57782.bikrant_ml@wlink.com.np> X-Spam-Check-By: smtp1.wlink.com.np Spam: No ; -4.9 / 5.0 X-Spam-Status-WL: No, hits=-4.9 required=5.0 Subject: radius client parameters X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 31 Mar 2005 05:20:25 -0000 Hi I would like the radius client send some optional parameters to my Radius server ( running Radiator). How would I do that? I am authenticating pppoe users with the radius server. Now I would like add some features like MACAddress+UserName+Password authentication. So that I can restrict the username on MAC address basis. I am running PPPoE with radius client on FreeBSD 4.10 and 4.9. Any help/pointer is highly appreciated. with regards, Bikrant From owner-freebsd-isp@FreeBSD.ORG Thu Mar 31 06:13:09 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1029316A4CE; Thu, 31 Mar 2005 06:13:09 +0000 (GMT) Received: from smtp2.skyinet.net (smtp2.skyinet.net [202.78.97.7]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8446443D5D; Thu, 31 Mar 2005 06:13:08 +0000 (GMT) (envelope-from fooler@skyinet.net) Received: from fooler (fooler.ilo.skyinet.net [202.78.118.66]) by smtp2.skyinet.net (Postfix) with SMTP id 607F75BA72; Thu, 31 Mar 2005 14:13:06 +0800 (PHT) Message-ID: <05af01c535b8$b4a51720$42764eca@ilo.skyinet.net> From: "fooler" To: "Bikrant Neupane" , References: <200503311104.57782.bikrant_ml@wlink.com.np> Date: Thu, 31 Mar 2005 14:13:06 +0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 1 X-MSMail-Priority: High X-Mailer: Microsoft Outlook Express 6.00.2800.1437 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1409 cc: freebsd-net@freebsd.org Subject: Re: radius client parameters X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 31 Mar 2005 06:13:09 -0000 ----- Original Message ----- From: "Bikrant Neupane" To: Sent: Thursday, March 31, 2005 1:19 PM Subject: radius client parameters > Hi > > I would like the radius client send some optional parameters to my Radius > server ( running Radiator). How would I do that? > I am authenticating pppoe users with the radius server. Now I would like add > some features like MACAddress+UserName+Password authentication. So that I can > restrict the username on MAC address basis. > > I am running PPPoE with radius client on FreeBSD 4.10 and 4.9. > > Any help/pointer is highly appreciated. although brian somers (author of user ppp) forgot to document from the ppp's man page, the mac address is in the CALLING_STATION_ID (type 31) radius attribute :-> fooler. From owner-freebsd-isp@FreeBSD.ORG Thu Mar 31 09:32:14 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1298C16A4CE for ; Thu, 31 Mar 2005 09:32:14 +0000 (GMT) Received: from wproxy.gmail.com (wproxy.gmail.com [64.233.184.205]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9463743D1F for ; Thu, 31 Mar 2005 09:32:13 +0000 (GMT) (envelope-from eitesam@gmail.com) Received: by wproxy.gmail.com with SMTP id 69so477704wri for ; Thu, 31 Mar 2005 01:32:13 -0800 (PST) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:mime-version:content-type:content-transfer-encoding; b=I4rC2XkVx7c4+OOjt3Z7i9K5VGVA9QQrXnn71U6TyfF0OSsLUiFM1YZ5EYLbQlCtz0D6VR1iYnKFZlIpnzFknzoAYeS+XxPYgYvL4VYJBrgMTNKsiNoVn17tWoiIL2jUtB289LWbedTJmPrkyYb4Sc0yBa7Uwvptb6F7Yl3+nY8= Received: by 10.54.105.7 with SMTP id d7mr1436712wrc; Thu, 31 Mar 2005 01:32:13 -0800 (PST) Received: by 10.54.11.22 with HTTP; Thu, 31 Mar 2005 01:32:13 -0800 (PST) Message-ID: <5987a71b050331013264884ca1@mail.gmail.com> Date: Thu, 31 Mar 2005 14:32:13 +0500 From: Eitesam Ahmad To: freebsd-isp@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: PPPoE Disconnection Wireless ISP Future X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: Eitesam Ahmad List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 31 Mar 2005 09:32:14 -0000 Dear All, We are running a WISP, and i have configured a PPPoE server on Freebsd 5.4-PRERELEASE, with interepoch equipment 1100-A APs and Bridges, PPPoE works just great while authentication/connection/routing/security aspects, but there is a very big issue of user session disconnect, sometime users start automatically disconnecting and the message appears in ppp.log is pasted beloew, now as u may have seen that this user only took 5 minutes connectivity and after that it disconnects automatically ? i cannot figure oit what is the problem exactly ? following is my ppp.conf I know what is timeout, so please dont think that users are getting dc coz of session timeout, i have specially compiled software which sends keepalive packets to the network every one minute and users doibnt get dc coz of timeout, I tried to disable lqr and echo thinking that might this is the reason for user dc, as when wireless link have weak signal or some problem in the link, ppp might get disconnected, but no luck, and users are still facing the same problem. Please take a serious look at the problem and do let me know with your valuable advices, i shall be thankfull to all of you. ##########ppp.conf########## default: set log Chat Command Phase hdlc lqm ipcp enable pap #turn on chap and pap accounting allow mode direct #turn on ppp bridging enable proxy #turn on ppp proxyarping (redundant of above???) disable ipv6cp #we don't use ipv6, don't want the errors set mru 1472 #set mru below 1500 (PPPoE MTU issue) set mtu 1472 #set mtu below 1500 (PPPoE MTU issue) disable lqr ( Disabled, might be the reason to dc user but no luck ) disable echo ( Disabled, might be the reason to dc user but no luck ) enable mschapv2 mppe disable deflate pred1 deny deflate pred1 set mppe 128 * set timeout 300 set ifaddr 192.168.0.1 192.168.0.50-192.168.0.254 255.255.255.255 set radius /etc/radius.conf #turn on radius auth and use this file accept dns #turn on dns cacheing/forwarding ################### #############ppp.log################# Mar 31 12:30:14 wifi ppp[62716]: Phase: Radius(acct): START data sent Mar 31 12:30:14 wifi ppp[62716]: Command: default: bg /etc/ppp/addclient.sh USER connect HISADDR INTERFACE Mar 31 12:35:12 wifi ppp[62716]: Phase: deflink: open -> lcp Mar 31 12:35:12 wifi ppp[62716]: IPCP: deflink: LayerDown: 137.101.143.1 Mar 31 12:35:12 wifi ppp[62716]: Phase: Radius(acct): STOP data sent Mar 31 12:35:12 wifi ppp[62716]: Command: default: bg /etc/ppp/removeclient.sh USER disconnect HISADDR INTERFACE Mar 31 12:35:12 wifi ppp[62716]: IPCP: deflink: State change Opened --> Starting Mar 31 12:35:12 wifi ppp[62716]: IPCP: deflink: LayerFinish. Mar 31 12:35:12 wifi ppp[62716]: IPCP: Connect time: 298 secs: 28406 octets in, 570583 octets out Mar 31 12:35:12 wifi ppp[62716]: IPCP: 333 packets in, 473 packets out Mar 31 12:35:12 wifi ppp[62716]: IPCP: total 2010 bytes/sec, peak 13457 bytes/sec on Thu Mar 31 12:31:33 2005 Mar 31 12:35:12 wifi ppp[62716]: IPCP: deflink: State change Starting --> Initial Mar 31 12:35:12 wifi ppp[62716]: Phase: bundle: Terminate Mar 31 12:35:12 wifi ppp[62716]: Phase: deflink: read (0): Got zero bytes Mar 31 12:35:12 wifi ppp[62716]: Phase: deflink: Disconnected! Mar 31 12:35:12 wifi ppp[62716]: Phase: deflink: Connect time: 302 secs: 20507 octets in, 557773 octets out Mar 31 12:35:12 wifi ppp[62716]: Phase: deflink: 391 packets in, 531 packets out Mar 31 12:35:12 wifi ppp[62716]: Phase: total 1914 bytes/sec, peak 13064 bytes/sec on Thu Mar 31 12:31:36 2005 Mar 31 12:35:12 wifi ppp[62716]: Phase: deflink: lcp -> closed Mar 31 12:35:12 wifi ppp[62716]: Phase: bundle: Dead Mar 31 12:35:12 wifi ppp[62716]: Phase: PPP Terminated (normal) ################### Regards Etechnix From owner-freebsd-isp@FreeBSD.ORG Thu Mar 31 10:00:31 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E003F16A4CE for ; Thu, 31 Mar 2005 10:00:31 +0000 (GMT) Received: from wproxy.gmail.com (wproxy.gmail.com [64.233.184.206]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8DBF443D1D for ; Thu, 31 Mar 2005 10:00:31 +0000 (GMT) (envelope-from etechnix@gmail.com) Received: by wproxy.gmail.com with SMTP id 69so483775wri for ; Thu, 31 Mar 2005 02:00:31 -0800 (PST) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:mime-version:content-type:content-transfer-encoding; b=Jcag9yH3YziGmYIlDZnV+DkjFGX+Mcq+PdL21r5l0Kqgeu9Ube+mV/unXZNLzVpYYl9oY+IToopwOTBS1iZoWYz3VlUXjEHJeCF9Drhn0o+BLx/8rRClZ7uvt9ahpSzjU3Sik6FGi4jNiSrbfmA6nuis8Vc8aRLDK3KiLS6gw2w= Received: by 10.54.103.15 with SMTP id a15mr886598wrc; Thu, 31 Mar 2005 02:00:31 -0800 (PST) Received: by 10.54.4.22 with HTTP; Thu, 31 Mar 2005 02:00:31 -0800 (PST) Message-ID: Date: Thu, 31 Mar 2005 15:00:31 +0500 From: Ahmad Khan To: freebsd-isp@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: subscription problem X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: Ahmad Khan List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 31 Mar 2005 10:00:32 -0000 From owner-freebsd-isp@FreeBSD.ORG Thu Mar 31 12:02:20 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AD90A16A4CE; Thu, 31 Mar 2005 12:02:20 +0000 (GMT) Received: from gw.Awfulhak.org (awfulhak.demon.co.uk [80.177.173.150]) by mx1.FreeBSD.org (Postfix) with ESMTP id DADBF43D4C; Thu, 31 Mar 2005 12:02:19 +0000 (GMT) (envelope-from brian@Awfulhak.org) Received: from dev.lan.Awfulhak.org (brian@dev.lan.Awfulhak.org [172.16.0.5]) by gw.Awfulhak.org (8.13.3/8.13.3) with ESMTP id j2VC2ELX003687; Thu, 31 Mar 2005 13:02:14 +0100 (BST) (envelope-from brian@Awfulhak.org) Date: Thu, 31 Mar 2005 13:02:13 +0100 From: Brian Somers To: "fooler" Message-ID: <20050331130213.656c4b88@dev.lan.Awfulhak.org> In-Reply-To: <05af01c535b8$b4a51720$42764eca@ilo.skyinet.net> References: <200503311104.57782.bikrant_ml@wlink.com.np> <05af01c535b8$b4a51720$42764eca@ilo.skyinet.net> X-Mailer: Sylpheed-Claws 1.0.4 (GTK+ 1.2.10; i386-portbld-freebsd6.0) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-Spam-Status: No, score=-2.8 required=5.0 tests=ALL_TRUSTED autolearn=failed version=3.0.2 X-Spam-Checker-Version: SpamAssassin 3.0.2 (2004-11-16) on gw.lan.Awfulhak.org cc: freebsd-isp@freebsd.org cc: freebsd-net@freebsd.org cc: Bikrant Neupane Subject: Re: radius client parameters X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 31 Mar 2005 12:02:20 -0000 On Thu, 31 Mar 2005 14:13:06 +0800, "fooler" wrote: > although brian somers (author of user ppp) forgot to document from the ppp's > man page, the mac address is in the CALLING_STATION_ID (type 31) radius > attribute :-> > > fooler. Patches are always welcome :*P -- Brian Somers Don't _EVER_ lose your sense of humour ! From owner-freebsd-isp@FreeBSD.ORG Thu Mar 31 15:13:37 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4E55E16A4CE for ; Thu, 31 Mar 2005 15:13:37 +0000 (GMT) Received: from mx2.duracom.net (mx2.duracom.net [65.66.8.5]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1C7F643D53 for ; Thu, 31 Mar 2005 15:13:37 +0000 (GMT) (envelope-from kris.mcelroy@duracom.net) Received: from duracom.net (mail.duracom.net [65.66.8.3]) by mx2.duracom.net (Postfix) with ESMTP id 8BE6FD54F4 for ; Thu, 31 Mar 2005 09:23:17 -0600 (CST) (envelope-from kris.mcelroy@duracom.net) Received: from KrisLaptop [65.66.11.103] by duracom.net with ESMTP (SMTPD32-8.05) id A39C1E1F0232; Thu, 31 Mar 2005 09:13:32 -0600 From: "Kris McElroy" To: Date: Thu, 31 Mar 2005 09:12:46 -0600 MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook, Build 11.0.6353 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2800.1441 Thread-Index: AcU2BBgf/OQ2c6ikTPKP5kufbzYfdw== Message-Id: <200503310913758.SM01232@KrisLaptop> X-Declude-Sender: kris.mcelroy@duracom.net [65.66.11.103] X-Declude-Spoolname: D139c1e1f0232886c.SMD Subject: Reference Book X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 31 Mar 2005 15:13:37 -0000 What is a good recommended reference book for FreeBSD? I am just learning FreeBSD and need a good book to reference. Thanks, Kris From owner-freebsd-isp@FreeBSD.ORG Thu Mar 31 15:19:13 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id ADAC416A4CE for ; Thu, 31 Mar 2005 15:19:13 +0000 (GMT) Received: from materva.diewebmaster.at (materva.diewebmaster.at [80.66.42.216]) by mx1.FreeBSD.org (Postfix) with ESMTP id D9A2243D3F for ; Thu, 31 Mar 2005 15:19:12 +0000 (GMT) (envelope-from christian.damm@diewebmaster.at) Received: from localhost (localhost.diewebmaster.at [127.0.0.1]) by materva.diewebmaster.at (Postfix) with ESMTP id 45B692180F2; Thu, 31 Mar 2005 17:19:11 +0200 (CEST) Received: from materva.diewebmaster.at ([127.0.0.1]) by localhost (materva.diewebmaster.at [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 51948-02; Thu, 31 Mar 2005 17:19:11 +0200 (CEST) Received: from [192.168.1.14] (da.diewebmaster.at [192.168.1.14]) by materva.diewebmaster.at (Postfix) with ESMTP id E246A218050; Thu, 31 Mar 2005 17:19:10 +0200 (CEST) Message-ID: <424C1400.10902@diewebmaster.at> Date: Thu, 31 Mar 2005 17:15:12 +0200 From: Christian Damm User-Agent: Mozilla Thunderbird 0.9 (Windows/20041103) X-Accept-Language: de-DE, de, en-us, en MIME-Version: 1.0 To: Kris McElroy References: <200503310913758.SM01232@KrisLaptop> In-Reply-To: <200503310913758.SM01232@KrisLaptop> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit X-Virus-Scanned: by amavisd-new at diewebmaster.at cc: freebsd-isp@freebsd.org Subject: Re: Reference Book X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 31 Mar 2005 15:19:13 -0000 there are some good FreeBSD books out there and i have em all (some in german only by C&L) - just look around at amazon...my personal highly recommended favorite is "the complete FreeBSD" by greg lehey...with this book you cant go wrong. Kris McElroy schrieb: > What is a good recommended reference book for FreeBSD? I am just learning > FreeBSD and need a good book to reference. > > > > > > Thanks, > > > Kris > > _______________________________________________ > freebsd-isp@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-isp > To unsubscribe, send any mail to "freebsd-isp-unsubscribe@freebsd.org" > > !DSPAM:424c13c1526321519143711! > -- mfg. christian damm technische leitung phone: dw 42 email: christian.damm@diewebmaster.at icq at work: 124464652 die webmaster - flötzerweg 156 - 4030 linz - austria phone: +43-732-381242, fax: +43-732-381242-22, isdn (leonardo): +43-732-381242-33 homepage: www.diewebmaster.at, public email: office@diewebmaster.at From owner-freebsd-isp@FreeBSD.ORG Thu Mar 31 15:24:23 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8E13916A4E4 for ; Thu, 31 Mar 2005 15:24:23 +0000 (GMT) Received: from mail.yazzy.org (mail.yazzy.org [217.8.140.16]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5357743D1D for ; Thu, 31 Mar 2005 15:24:22 +0000 (GMT) (envelope-from lists@yazzy.org) Received: from yazzy.yazzy.net (yazzy.yazzy.org [192.168.98.11]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.yazzy.org (Postfix) with ESMTP id 2284A39911; Thu, 31 Mar 2005 17:26:14 +0200 (CEST) Date: Thu, 31 Mar 2005 15:24:47 +0000 From: Marcin Jessa To: Eitesam Ahmad Message-Id: <20050331152447.28d16e62.lists@yazzy.org> In-Reply-To: <5987a71b050331013264884ca1@mail.gmail.com> References: <5987a71b050331013264884ca1@mail.gmail.com> Organization: YazzY.org X-Mailer: Sylpheed version 1.0.0 (GTK+ 1.2.10; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit cc: freebsd-isp@freebsd.org Subject: Re: PPPoE Disconnection Wireless ISP Future X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 31 Mar 2005 15:24:23 -0000 Hi. Seems to me like it times out after 300s. I recommend you to read http://www.hpi.net/whitepapers/warta/ Cheers. On Thu, 31 Mar 2005 14:32:13 +0500 Eitesam Ahmad wrote: > Dear All, > > We are running a WISP, and i have configured a PPPoE server on > Freebsd 5.4-PRERELEASE, with interepoch equipment 1100-A APs and > Bridges, PPPoE works just great while > authentication/connection/routing/security aspects, but there is a > very big issue of user session disconnect, sometime users start > automatically disconnecting and the message appears in ppp.log is > pasted beloew, now as u may have seen that this user only took 5 > minutes connectivity and after that it disconnects automatically ? i > cannot figure oit what is the problem exactly ? > > following is my ppp.conf > > I know what is timeout, so please dont think that users are getting dc > coz of session timeout, i have specially compiled software which sends > keepalive packets to the network every one minute and users doibnt get > dc coz of timeout, I tried to disable lqr and echo thinking that might > this is the reason for user dc, as when wireless link have weak signal > or some problem in the link, ppp might get disconnected, but no luck, > and users are still facing the same problem. > > Please take a serious look at the problem and do let me know with your > valuable advices, i shall be thankfull to all of you. > > ##########ppp.conf########## > default: > set log Chat Command Phase hdlc lqm ipcp > enable pap #turn on chap and pap accounting > allow mode direct #turn on ppp bridging > enable proxy #turn on ppp proxyarping > (redundant of above???) > disable ipv6cp #we don't use ipv6, don't > want the errors > set mru 1472 #set mru below 1500 (PPPoE MTU issue) > set mtu 1472 #set mtu below 1500 (PPPoE MTU issue) > disable lqr ( Disabled, might be the reason to dc user but no luck ) > disable echo ( Disabled, might be the reason to dc user but no luck ) > enable mschapv2 mppe > disable deflate pred1 > deny deflate pred1 > set mppe 128 * > set timeout 300 > set ifaddr 192.168.0.1 192.168.0.50-192.168.0.254 255.255.255.255 > set radius /etc/radius.conf #turn on radius auth and use this file > accept dns #turn on dns cacheing/forwarding > ################### > > #############ppp.log################# > Mar 31 12:30:14 wifi ppp[62716]: Phase: Radius(acct): START data sent > Mar 31 12:30:14 wifi ppp[62716]: Command: default: bg > /etc/ppp/addclient.sh USER connect HISADDR INTERFACE > Mar 31 12:35:12 wifi ppp[62716]: Phase: deflink: open -> lcp > Mar 31 12:35:12 wifi ppp[62716]: IPCP: deflink: LayerDown: 137.101.143.1 > Mar 31 12:35:12 wifi ppp[62716]: Phase: Radius(acct): STOP data sent > Mar 31 12:35:12 wifi ppp[62716]: Command: default: bg > /etc/ppp/removeclient.sh USER disconnect HISADDR INTERFACE > Mar 31 12:35:12 wifi ppp[62716]: IPCP: deflink: State change Opened --> Starting > Mar 31 12:35:12 wifi ppp[62716]: IPCP: deflink: LayerFinish. > Mar 31 12:35:12 wifi ppp[62716]: IPCP: Connect time: 298 secs: 28406 > octets in, 570583 octets out > Mar 31 12:35:12 wifi ppp[62716]: IPCP: 333 packets in, 473 packets out > Mar 31 12:35:12 wifi ppp[62716]: IPCP: total 2010 bytes/sec, peak > 13457 bytes/sec on Thu Mar 31 12:31:33 2005 > Mar 31 12:35:12 wifi ppp[62716]: IPCP: deflink: State change Starting > --> Initial > Mar 31 12:35:12 wifi ppp[62716]: Phase: bundle: Terminate > Mar 31 12:35:12 wifi ppp[62716]: Phase: deflink: read (0): Got zero bytes > Mar 31 12:35:12 wifi ppp[62716]: Phase: deflink: Disconnected! > Mar 31 12:35:12 wifi ppp[62716]: Phase: deflink: Connect time: 302 > secs: 20507 octets in, 557773 octets out > Mar 31 12:35:12 wifi ppp[62716]: Phase: deflink: 391 packets in, 531 packets out > Mar 31 12:35:12 wifi ppp[62716]: Phase: total 1914 bytes/sec, peak > 13064 bytes/sec on Thu Mar 31 12:31:36 2005 > Mar 31 12:35:12 wifi ppp[62716]: Phase: deflink: lcp -> closed > Mar 31 12:35:12 wifi ppp[62716]: Phase: bundle: Dead > Mar 31 12:35:12 wifi ppp[62716]: Phase: PPP Terminated (normal) > ################### > > > Regards > > Etechnix > _______________________________________________ > freebsd-isp@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-isp > To unsubscribe, send any mail to "freebsd-isp-unsubscribe@freebsd.org" -- Regards, M. Jessa http://www.yazzy.org From owner-freebsd-isp@FreeBSD.ORG Thu Mar 31 15:41:29 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7562C16A4CE; Thu, 31 Mar 2005 15:41:29 +0000 (GMT) Received: from mail.yazzy.org (mail.yazzy.org [217.8.140.16]) by mx1.FreeBSD.org (Postfix) with ESMTP id F2FD543D48; Thu, 31 Mar 2005 15:41:28 +0000 (GMT) (envelope-from lists@yazzy.org) Received: from yazzy.yazzy.net (yazzy.yazzy.org [192.168.98.11]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.yazzy.org (Postfix) with ESMTP id A874F39911; Thu, 31 Mar 2005 17:43:17 +0200 (CEST) Date: Thu, 31 Mar 2005 15:41:50 +0000 From: Marcin Jessa To: Brian Somers Message-Id: <20050331154150.05ccb738.lists@yazzy.org> In-Reply-To: <20050331130213.656c4b88@dev.lan.Awfulhak.org> References: <200503311104.57782.bikrant_ml@wlink.com.np> <05af01c535b8$b4a51720$42764eca@ilo.skyinet.net> <20050331130213.656c4b88@dev.lan.Awfulhak.org> Organization: YazzY.org X-Mailer: Sylpheed version 1.0.0 (GTK+ 1.2.10; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit cc: freebsd-isp@freebsd.org cc: fooler@skyinet.net cc: bikrant_ml@wlink.com.np cc: freebsd-net@freebsd.org Subject: Re: radius client parameters X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 31 Mar 2005 15:41:29 -0000 Hi Brian, guys. Do you plan to add additional radius atributes to the PPP code ? The one I really miss is tx/rx data rate limitation. It'd be great if PPP could set bandwith limit based on those atributes received from radius server(s). I can't unfortunately code that myself but I know this is done with Linux's ppp by www.mikrotik.com/ and http://www.staros.com/ They all provide their changed code as it's GPL'd. Cheers On Thu, 31 Mar 2005 13:02:13 +0100 Brian Somers wrote: > On Thu, 31 Mar 2005 14:13:06 +0800, "fooler" wrote: > > although brian somers (author of user ppp) forgot to document from the ppp's > > man page, the mac address is in the CALLING_STATION_ID (type 31) radius > > attribute :-> > > > > fooler. > > Patches are always welcome :*P > From owner-freebsd-isp@FreeBSD.ORG Fri Apr 1 04:45:47 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AEEA816A4CE for ; Fri, 1 Apr 2005 04:45:47 +0000 (GMT) Received: from smtp4.wlink.com.np (smtp4.wlink.com.np [202.79.32.87]) by mx1.FreeBSD.org (Postfix) with SMTP id 8E79B43D41 for ; Fri, 1 Apr 2005 04:45:44 +0000 (GMT) (envelope-from bikrant_ml@wlink.com.np) Received: (qmail 55293 invoked from network); 1 Apr 2005 04:45:42 -0000 Received: from unknown (HELO av-scanner-02.wlink.com.np) (202.79.32.91) by 0 with SMTP; 1 Apr 2005 04:45:42 -0000 Received: (qmail 27271 invoked by uid 1009); 1 Apr 2005 04:45:45 -0000 Received: from bikrant_ml@wlink.com.np by av-scanner-02.wlink.com.np by uid 1003 with qmail-scanner-1.20 ( Clear:RC:1(202.79.32.78):. Processed in 0.029316 secs); 01 Apr 2005 04:45:45 -0000 Received: from smtp3.wlink.com.np (202.79.32.78) by av-scanner-02.wlink.com.np with SMTP; 1 Apr 2005 04:45:45 -0000 Received: (qmail 17418 invoked by uid 514); 1 Apr 2005 04:45:41 -0000 Received: from [202.79.36.168] (HELO bikrant.wlink.com.np) by smtp3.wlink.com.np (qmail-smtpd) with SMTP; 01 Apr 2005 04:45:41 -0000 (Fri, 01 Apr 2005 10:30:41 +0545) From: Bikrant Neupane To: freebsd-isp@freebsd.org Date: Fri, 1 Apr 2005 10:30:26 +0545 User-Agent: KMail/1.7.2 References: <200503311104.57782.bikrant_ml@wlink.com.np> <05af01c535b8$b4a51720$42764eca@ilo.skyinet.net> In-Reply-To: <05af01c535b8$b4a51720$42764eca@ilo.skyinet.net> MIME-Version: 1.0 Content-Disposition: inline Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <200504011030.26312.bikrant_ml@wlink.com.np> X-Spam-Check-By: smtp3.wlink.com.np Spam: No ; -4.9 / 5.0 X-Spam-Status-WL: No, hits=-4.9 required=5.0 cc: fooler cc: freebsd-net@freebsd.org Subject: Re: radius client parameters X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 01 Apr 2005 04:45:47 -0000 On Thursday 31 March 2005 11:58, fooler wrote: > ----- Original Message ----- > From: "Bikrant Neupane" > To: > Sent: Thursday, March 31, 2005 1:19 PM > Subject: radius client parameters > > > Hi > > > > I would like the radius client send some optional parameters to my Radius > > server ( running Radiator). How would I do that? > > I am authenticating pppoe users with the radius server. Now I would like > > add > > > some features like MACAddress+UserName+Password authentication. So that I > > can > > > restrict the username on MAC address basis. > > > > I am running PPPoE with radius client on FreeBSD 4.10 and 4.9. > > > > Any help/pointer is highly appreciated. > > although brian somers (author of user ppp) forgot to document from the > ppp's man page, the mac address is in the CALLING_STATION_ID (type 31) > radius attribute :-> Thanks for the reply. I am sending you the debug output i get in my radius log. Is CALLING_STATION_ID enabled by default in the radius configuration? However I don't see any Attributes in the access-request log. I guess it is the client which is not sending the CALLING_STATION_ID attribute by default to the server. How do I configure the radius client (in Freebsd) to send this attribute to the radius server ? >>>>>>>>>>> Thu Mar 10 03:42:36 2005: DEBUG: Packet dump: *** Received from xx.xx.xx.xx port 1634 .... Code: Access-Request Identifier: 142 Authentic: <151>d<201><229><8><187>d5<210><212>9<9>T<245>?D Attributes: User-Name = "dust" Service-Type = Framed-User Framed-Protocol = PPP User-Password = "<178>#|IU<176>qA<240>.<18><28>C<252><173><134>" NAS-Identifier = "pppoe-02.x.x.x" NAS-Port-Type = Ethernet NAS-Port = 44971 >>>>>>>>>>>> bikrant > > fooler. > > _______________________________________________ > freebsd-isp@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-isp > To unsubscribe, send any mail to "freebsd-isp-unsubscribe@freebsd.org" From owner-freebsd-isp@FreeBSD.ORG Fri Apr 1 05:03:15 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 54C6116A4CF for ; Fri, 1 Apr 2005 05:03:15 +0000 (GMT) Received: from smtp4.wlink.com.np (smtp4.wlink.com.np [202.79.32.87]) by mx1.FreeBSD.org (Postfix) with SMTP id 2835B43D2D for ; Fri, 1 Apr 2005 05:03:11 +0000 (GMT) (envelope-from bikrant@wlink.com.np) Received: (qmail 57704 invoked from network); 1 Apr 2005 05:03:08 -0000 Received: from unknown (HELO av-scanner-02.wlink.com.np) (202.79.32.91) by 0 with SMTP; 1 Apr 2005 05:03:08 -0000 Received: (qmail 35366 invoked by uid 1009); 1 Apr 2005 05:03:12 -0000 Received: from bikrant@wlink.com.np by av-scanner-02.wlink.com.np by uid 1003 with qmail-scanner-1.20 ( Clear:RC:1(202.79.32.78):. Processed in 0.012435 secs); 01 Apr 2005 05:03:12 -0000 Received: from smtp3.wlink.com.np (202.79.32.78) by av-scanner-02.wlink.com.np with SMTP; 1 Apr 2005 05:03:11 -0000 Received: (qmail 23395 invoked by uid 514); 1 Apr 2005 05:03:08 -0000 Received: from [202.79.36.168] (HELO bikrant.wlink.com.np) by smtp3.wlink.com.np (qmail-smtpd) with SMTP; 01 Apr 2005 05:03:07 -0000 (Fri, 01 Apr 2005 10:48:07 +0545) From: Bikrant Neupane To: freebsd-isp@freebsd.org, Eitesam Ahmad Date: Fri, 1 Apr 2005 10:47:54 +0545 User-Agent: KMail/1.7.2 References: <5987a71b050331013264884ca1@mail.gmail.com> In-Reply-To: <5987a71b050331013264884ca1@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200504011047.54338.bikrant@wlink.com.np> X-Spam-Check-By: smtp3.wlink.com.np Spam: No ; -104.9 / 5.0 X-Spam-Status-WL: No, hits=-104.9 required=5.0 Subject: Re: PPPoE Disconnection Wireless ISP Future X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 01 Apr 2005 05:03:15 -0000 I guess there are two timeout conditions, Session-Timeout and Idle timeout. You may want to verify both of them. We are also running wisp and we had many complains about frequent disconnection. Windows machine disconnects (dun client) if network goes down for about 40-45 seconds. I could not find anyway to increase the timeout value at the client end. I did try with registry settings but that didn't help either. Later we choose to use the tango manager pppoe client and so far it is working fine. regards, bikrant On Thursday 31 March 2005 15:17, Eitesam Ahmad wrote: > Dear All, > > We are running a WISP, and i have configured a PPPoE server on > Freebsd 5.4-PRERELEASE, with interepoch equipment 1100-A APs and > Bridges, PPPoE works just great while > authentication/connection/routing/security aspects, but there is a > very big issue of user session disconnect, sometime users start > automatically disconnecting and the message appears in ppp.log is > pasted beloew, now as u may have seen that this user only took 5 > minutes connectivity and after that it disconnects automatically ? i > cannot figure oit what is the problem exactly ? > > following is my ppp.conf > > I know what is timeout, so please dont think that users are getting dc > coz of session timeout, i have specially compiled software which sends > keepalive packets to the network every one minute and users doibnt get > dc coz of timeout, I tried to disable lqr and echo thinking that might > this is the reason for user dc, as when wireless link have weak signal > or some problem in the link, ppp might get disconnected, but no luck, > and users are still facing the same problem. > > Please take a serious look at the problem and do let me know with your > valuable advices, i shall be thankfull to all of you. > > ##########ppp.conf########## > default: > set log Chat Command Phase hdlc lqm ipcp > enable pap #turn on chap and pap accounting > allow mode direct #turn on ppp bridging > enable proxy #turn on ppp proxyarping > (redundant of above???) > disable ipv6cp #we don't use ipv6, don't > want the errors > set mru 1472 #set mru below 1500 (PPPoE MTU > issue) set mtu 1472 #set mtu below 1500 (PPPoE > MTU issue) disable lqr ( Disabled, might be the reason to dc user but no > luck ) disable echo ( Disabled, might be the reason to dc user but no > luck ) enable mschapv2 mppe > disable deflate pred1 > deny deflate pred1 > set mppe 128 * > set timeout 300 > set ifaddr 192.168.0.1 192.168.0.50-192.168.0.254 255.255.255.255 > set radius /etc/radius.conf #turn on radius auth and use this > file accept dns #turn on dns > cacheing/forwarding ################### > > #############ppp.log################# > Mar 31 12:30:14 wifi ppp[62716]: Phase: Radius(acct): START data sent > Mar 31 12:30:14 wifi ppp[62716]: Command: default: bg > /etc/ppp/addclient.sh USER connect HISADDR INTERFACE > Mar 31 12:35:12 wifi ppp[62716]: Phase: deflink: open -> lcp > Mar 31 12:35:12 wifi ppp[62716]: IPCP: deflink: LayerDown: 137.101.143.1 > Mar 31 12:35:12 wifi ppp[62716]: Phase: Radius(acct): STOP data sent > Mar 31 12:35:12 wifi ppp[62716]: Command: default: bg > /etc/ppp/removeclient.sh USER disconnect HISADDR INTERFACE > Mar 31 12:35:12 wifi ppp[62716]: IPCP: deflink: State change Opened --> > Starting Mar 31 12:35:12 wifi ppp[62716]: IPCP: deflink: LayerFinish. > Mar 31 12:35:12 wifi ppp[62716]: IPCP: Connect time: 298 secs: 28406 > octets in, 570583 octets out > Mar 31 12:35:12 wifi ppp[62716]: IPCP: 333 packets in, 473 packets out > Mar 31 12:35:12 wifi ppp[62716]: IPCP: total 2010 bytes/sec, peak > 13457 bytes/sec on Thu Mar 31 12:31:33 2005 > Mar 31 12:35:12 wifi ppp[62716]: IPCP: deflink: State change Starting > --> Initial > Mar 31 12:35:12 wifi ppp[62716]: Phase: bundle: Terminate > Mar 31 12:35:12 wifi ppp[62716]: Phase: deflink: read (0): Got zero bytes > Mar 31 12:35:12 wifi ppp[62716]: Phase: deflink: Disconnected! > Mar 31 12:35:12 wifi ppp[62716]: Phase: deflink: Connect time: 302 > secs: 20507 octets in, 557773 octets out > Mar 31 12:35:12 wifi ppp[62716]: Phase: deflink: 391 packets in, 531 > packets out Mar 31 12:35:12 wifi ppp[62716]: Phase: total 1914 bytes/sec, > peak 13064 bytes/sec on Thu Mar 31 12:31:36 2005 > Mar 31 12:35:12 wifi ppp[62716]: Phase: deflink: lcp -> closed > Mar 31 12:35:12 wifi ppp[62716]: Phase: bundle: Dead > Mar 31 12:35:12 wifi ppp[62716]: Phase: PPP Terminated (normal) > ################### > > > Regards > > Etechnix > _______________________________________________ > freebsd-isp@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-isp > To unsubscribe, send any mail to "freebsd-isp-unsubscribe@freebsd.org" From owner-freebsd-isp@FreeBSD.ORG Fri Apr 1 05:10:50 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 011D016A4CE; Fri, 1 Apr 2005 05:10:49 +0000 (GMT) Received: from smtp2.skyinet.net (smtp2.skyinet.net [202.78.97.7]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8AC6143D31; Fri, 1 Apr 2005 05:10:49 +0000 (GMT) (envelope-from fooler@skyinet.net) Received: from fooler (fooler.ilo.skyinet.net [202.78.118.66]) by smtp2.skyinet.net (Postfix) with SMTP id 85DB45BB08; Fri, 1 Apr 2005 13:10:47 +0800 (PHT) Message-ID: <024e01c53679$2c2cbf80$42764eca@ilo.skyinet.net> From: "fooler" To: "Marcin Jessa" , "Brian Somers" References: <200503311104.57782.bikrant_ml@wlink.com.np><05af01c535b8$b4a51720$42764eca@ilo.skyinet.net><20050331130213.656c4b88@dev.lan.Awfulhak.org> <20050331154150.05ccb738.lists@yazzy.org> Date: Fri, 1 Apr 2005 13:10:49 +0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 1 X-MSMail-Priority: High X-Mailer: Microsoft Outlook Express 6.00.2800.1437 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1409 cc: freebsd-isp@freebsd.org cc: freebsd-net@freebsd.org cc: bikrant_ml@wlink.com.np Subject: Re: radius client parameters X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 01 Apr 2005 05:10:50 -0000 ----- Original Message ----- From: "Marcin Jessa" To: "Brian Somers" Cc: ; ; ; Sent: Thursday, March 31, 2005 11:41 PM Subject: Re: radius client parameters > Hi Brian, guys. > > Do you plan to add additional radius atributes to the PPP code ? > The one I really miss is tx/rx data rate limitation. > It'd be great if PPP could set bandwith limit based on those atributes received from radius server(s). > I can't unfortunately code that myself but I know this is done with Linux's ppp by www.mikrotik.com/ and http://www.staros.com/ > They all provide their changed code as it's GPL'd. hello marcin... current radius rfc (rfc2865) didnt say anything about tx/rx data rate limitation radius attribute... but there is a way how to do it with freebsd :-> since freebsd ppp supported RAD_FILTER_ID and part of the access-accept radius packet type... just simply send the label to FILTER_ID radius attribute and put that label into /etc/ppp/ppp.linkup file where inside that label is doing the bandwidth management using IPFW as its bandwidth manager... just make sure you do a cleanup (removing ipfw pipe rules) inside /etc/ppp/ppp.linkdown file upon disconnection... you need a pipe number for ipfw for identification for that connection... just play with the tunnel interface number as its pipe number for easy creating and removing pipe :-> fooler. From owner-freebsd-isp@FreeBSD.ORG Fri Apr 1 05:56:31 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C4C9F16A4CE; Fri, 1 Apr 2005 05:56:31 +0000 (GMT) Received: from smtp1.skyinet.net (smtp1.skyinet.net [202.78.97.6]) by mx1.FreeBSD.org (Postfix) with ESMTP id 373AF43D1D; Fri, 1 Apr 2005 05:56:31 +0000 (GMT) (envelope-from fooler@skyinet.net) Received: from fooler (fooler.ilo.skyinet.net [202.78.118.66]) by smtp1.skyinet.net (Postfix) with SMTP id 311625839C; Fri, 1 Apr 2005 13:56:09 +0800 (PHT) Message-ID: <026601c5367f$821296d0$42764eca@ilo.skyinet.net> From: "fooler" To: "Bikrant Neupane" , References: <200503311104.57782.bikrant_ml@wlink.com.np><05af01c535b8$b4a51720$42764eca@ilo.skyinet.net> <200504011030.26312.bikrant_ml@wlink.com.np> Date: Fri, 1 Apr 2005 13:56:01 +0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 1 X-MSMail-Priority: High X-Mailer: Microsoft Outlook Express 6.00.2800.1437 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1409 cc: freebsd-net@freebsd.org Subject: Re: radius client parameters X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 01 Apr 2005 05:56:31 -0000 ----- Original Message ----- From: "Bikrant Neupane" To: Cc: "fooler" ; Sent: Friday, April 01, 2005 12:45 PM Subject: Re: radius client parameters > Is CALLING_STATION_ID enabled by default in the radius configuration? since you are using freebsd 4.10 while i look the code of user ppp in freebsd 5.3... please check at /usr/src/usr.sbin/ppp/radius.c function radius_Authenticate() if you find this: if (rad_put_string(r->cx.rad, RAD_NAS_IDENTIFIER, hostname) != 0) { log_Printf(LogERROR, "rad_put: rad_put_string: %s\n", rad_strerror(r->cx.rad)); rad_close(r->cx.rad); return 0; } } if ((mac_addr = getenv("HISMACADDR")) != NULL && rad_put_string(r->cx.rad, RAD_CALLING_STATION_ID, mac_addr) != 0) { log_Printf(LogERROR, "rad_put: %s\n", rad_strerror(r->cx.rad)); rad_close(r->cx.rad); return; } radius_put_physical_details(r->cx.rad, authp->physical); if you dont find RAD_CALLING_STATION_ID then fetch the latest version of user-ppp and youll be fine... > However > I don't see any Attributes in the access-request log. I guess it is the > client which is not sending the CALLING_STATION_ID attribute by default to > the server. How do I configure the radius client (in Freebsd) to send this > attribute to the radius server ? pppoed is the one resposible assigning the mac address to environment variable HISMACADDR while the user-ppp get and put it to CALLING_STATION_ID radius attribute (as show above code)... therefore user-ppp automatically do it for you to send that radius attribute.. fooler. From owner-freebsd-isp@FreeBSD.ORG Fri Apr 1 06:32:46 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A229016A4CE for ; Fri, 1 Apr 2005 06:32:46 +0000 (GMT) Received: from rproxy.gmail.com (rproxy.gmail.com [64.233.170.203]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4BD0043D46 for ; Fri, 1 Apr 2005 06:32:46 +0000 (GMT) (envelope-from francisv.list@gmail.com) Received: by rproxy.gmail.com with SMTP id a41so579800rng for ; Thu, 31 Mar 2005 22:32:45 -0800 (PST) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:mime-version:content-type:content-transfer-encoding; b=hf5zT65n6+SkyDBr1HP1F4G44r1Eiw5RV6alOS69/2JqeSfZu2l4lYQF7pBpKIxwGHacEoECO6C/LMrvJxRgD2xJ7oYJxv75L4I4AesXCu22U6eBpaj66pgh2hmlPp4ULhENsBU3LilF3QYw+uFN+g0hjGld2lbIOVuJ27lScxY= Received: by 10.38.87.21 with SMTP id k21mr2379612rnb; Thu, 31 Mar 2005 22:32:45 -0800 (PST) Received: by 10.38.67.70 with HTTP; Thu, 31 Mar 2005 22:32:45 -0800 (PST) Message-ID: Date: Fri, 1 Apr 2005 14:32:45 +0800 From: Francis Vidal To: freebsd-isp@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: FreeBSD 5.3 and WCCP X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: Francis Vidal List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 01 Apr 2005 06:32:46 -0000 Hi all, Is anyone here running Squid 2.5 on a FreeBSD 5.3-STABLE machine with WCCP? I've been trying the whole day to make it work but luck is nowhere in sight. From owner-freebsd-isp@FreeBSD.ORG Fri Apr 1 10:20:34 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AED2316A4CE for ; Fri, 1 Apr 2005 10:20:34 +0000 (GMT) Received: from lakepoint.domeneshop.no (lakepoint.domeneshop.no [194.63.248.41]) by mx1.FreeBSD.org (Postfix) with ESMTP id AD38843D1D for ; Fri, 1 Apr 2005 10:20:33 +0000 (GMT) (envelope-from lists@wm-access.no) Received: from [192.168.2.8] (gw1.wm-access.no [81.191.131.91]) (authenticated bits=0)j31AKUKS013392; Fri, 1 Apr 2005 12:20:32 +0200 Message-ID: <424D206A.4050007@wm-access.no> Date: Fri, 01 Apr 2005 12:20:26 +0200 From: =?ISO-8859-1?Q?Sten_Daniel_S=F8rsdal?= User-Agent: Mozilla Thunderbird 1.0.2 (Windows/20050317) X-Accept-Language: en-us, en MIME-Version: 1.0 To: Marcin Jessa , freebsd-isp@freebsd.org References: <200503311104.57782.bikrant_ml@wlink.com.np> <05af01c535b8$b4a51720$42764eca@ilo.skyinet.net> <20050331130213.656c4b88@dev.lan.Awfulhak.org> <20050331154150.05ccb738.lists@yazzy.org> In-Reply-To: <20050331154150.05ccb738.lists@yazzy.org> X-Enigmail-Version: 0.90.2.0 X-Enigmail-Supports: pgp-inline, pgp-mime Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Subject: Re: radius client parameters X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 01 Apr 2005 10:20:34 -0000 Marcin Jessa wrote: > Hi Brian, guys. > > Do you plan to add additional radius atributes to the PPP code ? > The one I really miss is tx/rx data rate limitation. > It'd be great if PPP could set bandwith limit based on those atributes received from radius server(s). > I can't unfortunately code that myself but I know this is done with Linux's ppp by www.mikrotik.com/ and http://www.staros.com/ > They all provide their changed code as it's GPL'd. > Why cant you use the sh scripts i wrote, you probably have a copy around somwhere. (The scripts would be /etc/ppp/pppconnection.sh and references in /etc/ppp.linkup and /etc/ppp/ppp.linkdown) These used FILTER_ID and IPFW2/Dummynet. fooler@skynet explains the principle of the scripts. Hacking in tx/rx data rate limitation would mean adding queueing to ppp, which IMHO would be cool but unnecessary. Especially with ALTQ and Dummynet around. RouterOS ppp only adds dynamic queues (somewhat like ALTQ) so they do not have queueing inside ppp. I bet Star-OS does the same. Perhaps someone would be generous with their time and adds fine-grained /dev/altq locking support enabling the altq command line utility. -- Sten Daniel Sørsdal From owner-freebsd-isp@FreeBSD.ORG Fri Apr 1 10:53:35 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7921716A4CE for ; Fri, 1 Apr 2005 10:53:35 +0000 (GMT) Received: from smtp.t50.ru (ns4.t50.ru [81.89.65.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id AAA5D43D2F for ; Fri, 1 Apr 2005 10:53:34 +0000 (GMT) (envelope-from karjagin@narod.ru) Received: from richi.teleintercom.ru ([81.89.64.105]) by smtp.t50.ru with esmtp (Exim 4.34) id 1DHJmO-0002gd-DI for freebsd-isp@freebsd.org; Fri, 01 Apr 2005 14:53:32 +0400 Message-ID: <424D283E.9020501@narod.ru> Date: Fri, 01 Apr 2005 14:53:50 +0400 From: Andrey Karyagin Organization: ZAO "Teleintercom" User-Agent: Mozilla/5.0 (X11; U; Linux i686; ru-RU; rv:1.7) Gecko/20040618 X-Accept-Language: ru-ru, ru, en MIME-Version: 1.0 To: freebsd-isp@freebsd.org References: <4243B7AB.4020308@narod.ru> <20050326003538.GE13396@seven.alameda.net> In-Reply-To: <20050326003538.GE13396@seven.alameda.net> X-Enigmail-Version: 0.84.1.0 X-Enigmail-Supports: pgp-inline, pgp-mime Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit X-Scan-Signature: fed18c83bd1b1b0a681ac059307c67cb Subject: Re: HP DL-360 and panic reboot X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 01 Apr 2005 10:53:35 -0000 Ulf Zimmermann пишет: >On Fri, Mar 25, 2005 at 10:03:07AM +0300, Andrey Karyagin wrote: > > >> <>Hello! >> I have a server HP DL-360 (1 x iXeon-2,8 Ghz (max 2 CPU), 1,5 Gb RAM, >> SCSI RAID 36,6 Gb (ciss driver)). Installed system is FreeBSD >> 4.10-STABLE. >> Some days ago the server starting panic reboot. The period of normal >> working is 24 hours plus/minus 15-20 minutes. As by cron, but cron is >> more stable and doesn't call panic reboot :-) >> May be somebody met with such problem? What can I do to solve this >> problem? > >> I would recommend to boot the SmartStart CD and run the diagnostic<> util to see if you have a memory problem. Hello, freebsd-isp. Boot from SmartStart CD, test all the hardware by all tests - all tests is Ok. Open the server case and try to re-put RAM cards to slots. CVS update to FreeBSD 4.11-STABLE - nothing helped. Server from boot/reboot works 23 hour and 55 minutes and then panic reboot. From owner-freebsd-isp@FreeBSD.ORG Fri Apr 1 15:32:56 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B768816A4CE for ; Fri, 1 Apr 2005 15:32:56 +0000 (GMT) Received: from mail2.morningstar.com (mail2.morningstar.com [208.215.236.87]) by mx1.FreeBSD.org (Postfix) with ESMTP id 430E043D46 for ; Fri, 1 Apr 2005 15:32:56 +0000 (GMT) (envelope-from joe@morningstar.com) Received: from adegainapp (66.150.100.55) by mail2.morningstar.com (LSMTP for Windows NT v1.1b) with SMTP id <55.000D5D6A@mail2.morningstar.com>; Fri, 1 Apr 2005 9:32:55 -0600 Date: Fri, 01 Apr 2005 09:32:55 -0600 From: joe@morningstar.com To: freebsd-isp@freebsd.org Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 7bit Subject: Re: hi [#2408198] X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 01 Apr 2005 15:32:56 -0000 This is an automated message to acknowledge that we have received your inquiry. A Product Support Representative will personally respond to your inquiry within 3 business days. In the meantime, you may wish to review the Frequently Asked Questions (FAQs) that are published on Morningstar.com as these may address the issue(s) you are having. To locate these, click on the Help tab in the top right hand corner of your screen. Or, click here for faster access: http://www.morningstar.com/Cover/Help.html We appreciate your business and look forward to assisting you with your inquiry. Best regards, Morningstar Product Support ----- freebsd-isp@freebsd.org Wrote ----- Your document. From owner-freebsd-isp@FreeBSD.ORG Fri Apr 1 19:03:48 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B620E16A4CE for ; Fri, 1 Apr 2005 19:03:48 +0000 (GMT) Received: from mx2.duracom.net (mx2.duracom.net [65.66.8.5]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6914143D48 for ; Fri, 1 Apr 2005 19:03:48 +0000 (GMT) (envelope-from kris.mcelroy@duracom.net) Received: from duracom.net (mail.duracom.net [65.66.8.3]) by mx2.duracom.net (Postfix) with ESMTP id 4D833D54E4 for ; Fri, 1 Apr 2005 13:13:40 -0600 (CST) (envelope-from kris.mcelroy@duracom.net) Received: from KrisLaptop [65.66.11.103] by duracom.net with ESMTP (SMTPD32-8.05) id AB0B5BF019A; Fri, 01 Apr 2005 13:03:39 -0600 From: "Kris McElroy" To: Date: Fri, 1 Apr 2005 13:02:49 -0600 MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook, Build 11.0.6353 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1441 Thread-Index: AcU27WWjwr7QhWJIQG+c3fjq4XpCNg== Message-Id: <200504011303920.SM01232@KrisLaptop> X-Declude-Sender: kris.mcelroy@duracom.net [65.66.11.103] X-Declude-Spoolname: D9b0b05bf019a9b3c.SMD Subject: Cron and File Manipulation X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 01 Apr 2005 19:03:48 -0000 First of all I am a newbie to FreeBSD and if I need to be pointed somewhere else let me know. I have 2 questions I have a .sh script that I want to run every 25 minutes everyday So would I do the following: 25 * * * * root /usr/local/bin/MY.sh > /dev/null 2>&1 Also in the above script I want to add a line in my log file Echo >> MY SH Completed The thing is I would like to date and timestamp it, how could I do that? Thanks, Kris McElroy kmcelroy@duracom.net Chief Technology Officer Duracom, INC. www.duracom.net From owner-freebsd-isp@FreeBSD.ORG Fri Apr 1 19:45:23 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1214116A4CE for ; Fri, 1 Apr 2005 19:45:23 +0000 (GMT) Received: from bellana.nc-rj.rnp.br (bellana.nc-rj.rnp.br [200.17.63.130]) by mx1.FreeBSD.org (Postfix) with SMTP id 2280643D1F for ; Fri, 1 Apr 2005 19:45:21 +0000 (GMT) (envelope-from alex@rnp.br) Received: (qmail 91001 invoked by uid 0); 1 Apr 2005 19:45:18 -0000 Received: from kira.nc-rj.rnp.br (200.17.63.90) by 0 with SMTP; 1 Apr 2005 19:45:18 -0000 Received: (qmail 68147 invoked by uid 0); 1 Apr 2005 19:45:18 -0000 Received: from chiclete.nc-rj.rnp.br (HELO ?200.143.192.52?) (200.143.192.52) by 0 with SMTP; 1 Apr 2005 19:45:18 -0000 Message-ID: <424DA4CD.7000009@rnp.br> Date: Fri, 01 Apr 2005 16:45:17 -0300 From: "Alex S. Moura" User-Agent: Mozilla Thunderbird 1.0 (Windows/20041206) X-Accept-Language: en-us, en MIME-Version: 1.0 To: Francis Vidal References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit cc: freebsd-isp@freebsd.org Subject: Re: FreeBSD 5.3 and WCCP X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 01 Apr 2005 19:45:23 -0000 Francis Vidal wrote: >Hi all, > >Is anyone here running Squid 2.5 on a FreeBSD 5.3-STABLE machine with >WCCP? I've been trying the whole day to make it work but luck is >nowhere in sight. > I'm trying the same, with no success either. I'm using pf, following the recipes at http://www.benzedrine.cx/transquid.html and http://www.squid-cache.org/Doc/FAQ/FAQ-17.html#ss17.13 How about you? Best regards, Alex From owner-freebsd-isp@FreeBSD.ORG Fri Apr 1 20:01:03 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 73C1616A4CF for ; Fri, 1 Apr 2005 20:01:03 +0000 (GMT) Received: from mh1.centtech.com (moat3.centtech.com [207.200.51.50]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7795C43D4C for ; Fri, 1 Apr 2005 20:01:02 +0000 (GMT) (envelope-from anderson@centtech.com) Received: from [10.177.171.220] (neutrino.centtech.com [10.177.171.220]) by mh1.centtech.com (8.13.1/8.13.1) with ESMTP id j31K0hfa088626; Fri, 1 Apr 2005 14:00:43 -0600 (CST) (envelope-from anderson@centtech.com) Message-ID: <424DA84E.4060206@centtech.com> Date: Fri, 01 Apr 2005 14:00:14 -0600 From: Eric Anderson User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.7.5) Gecko/20050325 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Kris McElroy References: <200504011303920.SM01232@KrisLaptop> In-Reply-To: <200504011303920.SM01232@KrisLaptop> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: ClamAV 0.82/799/Fri Apr 1 04:49:13 2005 on mh1.centtech.com X-Virus-Status: Clean cc: freebsd-isp@freebsd.org Subject: Re: Cron and File Manipulation X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 01 Apr 2005 20:01:03 -0000 Kris McElroy wrote: > First of all I am a newbie to FreeBSD and if I need to be pointed somewhere > else let me know. > > I have 2 questions > > I have a .sh script that I want to run every 25 minutes everyday > So would I do the following: > 25 * * * * root /usr/local/bin/MY.sh > > /dev/null 2>&1 > > > Also in the above script I want to add a line in my log file > > Echo >> MY SH Completed > > The thing is I would like to date and timestamp it, how could I do that? Hey Kris! Welcome to FreeBSD.. These are pretty basic Unix essentials, and you might like reading through parts of the FreeBSD handbook (available on the freebsd.org website). On your crontab, you've actually got it set to run at 25minutes after the hour, every hour, not every 25 minutes. You can have it run every 20 minutes for example, by doing this: */20 * * * * root /usr/local/bin/MY.sh > /dev/null 2>&1 That would run on any minute divisible by 20. For date/timestamping, a simple way could be: echo -n `date` >> logfile echo ": normal log text" >> logfile Eric -- ------------------------------------------------------------------------ Eric Anderson Sr. Systems Administrator Centaur Technology A lost ounce of gold may be found, a lost moment of time never. ------------------------------------------------------------------------ From owner-freebsd-isp@FreeBSD.ORG Fri Apr 1 22:01:39 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2449716A4CF for ; Fri, 1 Apr 2005 22:01:39 +0000 (GMT) Received: from telcommail.net (mail.telcom.net [200.80.13.13]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8E67E43D54 for ; Fri, 1 Apr 2005 22:01:38 +0000 (GMT) (envelope-from akachler@telcom.net) Received: from [216.22.121.203] (host203.216.22.121.telcom.net [216.22.121.203] (may be forged)) by telcommail.net (8.12.10/8.12.10) with ESMTP id j31LxYG6040153 for ; Fri, 1 Apr 2005 16:59:35 -0500 (EST) Message-ID: <424DC473.7090200@telcom.net> Date: Fri, 01 Apr 2005 17:00:19 -0500 From: Arie Kachler User-Agent: Mozilla Thunderbird 1.0.2 (Windows/20050317) X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-isp@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: re: Reference Book X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 01 Apr 2005 22:01:39 -0000 Don't underestimate the Handbook: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/index.html It is very good also. Arie Kachler From owner-freebsd-isp@FreeBSD.ORG Sat Apr 2 12:33:44 2005 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AD66A16A650 for ; Sat, 2 Apr 2005 12:33:41 +0000 (GMT) Received: from mail.yazzy.org (mail.yazzy.org [217.8.140.16]) by mx1.FreeBSD.org (Postfix) with ESMTP id 26B5643D1D for ; Sat, 2 Apr 2005 12:33:39 +0000 (GMT) (envelope-from lists@yazzy.org) Received: from yazzy.yazzy.net (yazzy.yazzy.org [192.168.98.11]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.yazzy.org (Postfix) with ESMTP id 8057939870; Sat, 2 Apr 2005 14:35:32 +0200 (CEST) Date: Sat, 2 Apr 2005 12:34:03 +0000 From: Marcin Jessa To: Sten Daniel =?ISO-8859-1?Q?S=F8rsdal?= Message-Id: <20050402123403.493da87a.lists@yazzy.org> In-Reply-To: <424D206A.4050007@wm-access.no> References: <200503311104.57782.bikrant_ml@wlink.com.np> <05af01c535b8$b4a51720$42764eca@ilo.skyinet.net> <20050331130213.656c4b88@dev.lan.Awfulhak.org> <20050331154150.05ccb738.lists@yazzy.org> <424D206A.4050007@wm-access.no> Organization: YazzY.org X-Mailer: Sylpheed version 1.0.0 (GTK+ 1.2.10; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable cc: freebsd-isp@freebsd.org Subject: Re: radius client parameters X-BeenThere: freebsd-isp@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Internet Services Providers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 02 Apr 2005 12:33:44 -0000 On Fri, 01 Apr 2005 12:20:26 +0200 Sten Daniel S=F8rsdal wrote: =20 > Why cant you use the sh scripts i wrote It's an ugly hack.=20 With it you have no way to access the userdatabase in the radius server and= set queuing based on the info in it. AFAIR user and bandwith info is stored in flat text files and parsed by the= shell scripts. One can ofcourse code something to make your life easier, e.g a parser conn= ecting to a database and then altering the ALTQ/DUMMYNET rules based on the= info fetched from it, just as the shell scripts do. =20 > Hacking in tx/rx data rate limitation would mean adding queueing to ppp, > which IMHO would be cool but unnecessary. Especially with ALTQ and > Dummynet around. RouterOS ppp only adds dynamic queues (somewhat like > ALTQ) so they do not have queueing inside ppp. I bet Star-OS does the sam= e. >=20 > Perhaps someone would be generous with their time and adds fine-grained > /dev/altq locking support enabling the altq command line utility. >=20 I think my solution described above should be able to fix the obsticles. =20 Regards, M. Jessa http://www.yazzy.org