From owner-freebsd-smp@FreeBSD.ORG Sun Apr 23 14:50:47 2006 Return-Path: X-Original-To: freebsd-smp@freebsd.org Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4519116A408; Sun, 23 Apr 2006 14:50:47 +0000 (UTC) (envelope-from etienne@usr.ch) Received: from multi.usr.ch (multi.usr.ch [157.161.175.12]) by mx1.FreeBSD.org (Postfix) with ESMTP id 69D5343D45; Sun, 23 Apr 2006 14:50:45 +0000 (GMT) (envelope-from etienne@usr.ch) Received: from multi.usr.ch (etienne@localhost [127.0.0.1]) by multi.usr.ch (8.12.11/8.12.11) with ESMTP id k3NEofV4004876; Sun, 23 Apr 2006 16:50:41 +0200 (CEST) (envelope-from etienne@multi.usr.ch) Received: (from etienne@localhost) by multi.usr.ch (8.12.11/8.12.11/Submit) id k3NEofMw004875; Sun, 23 Apr 2006 16:50:41 +0200 (CEST) (envelope-from etienne) From: Stefan Hauser Message-Id: <200604231450.k3NEofMw004875@multi.usr.ch> To: freebsd-smp@freebsd.org, freebsd-proliant@freebsd.org Date: Sun, 23 Apr 2006 16:50:41 +0200 (CEST) X-Mailer: ELM [version 2.4ME+ PL99f (25)] MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII X-Spam-Status: No, hits=-4.7 required=5.0 tests=AWL,BAYES_00 autolearn=ham version=2.63 X-Spam-Checker-Version: SpamAssassin 2.63 (2004-01-11) on multi.usr.ch Cc: Subject: no smp with compaq proliant ml570 X-BeenThere: freebsd-smp@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD SMP implementation group List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Apr 2006 14:50:47 -0000 hello i tried freebsd 6.1-rc on a compaq proliant ml 570 with 4 cpu. but freebsd doesnt want to do smp there. tried 7-current to, no difference. kernel(s) do have option SMP in the config file. thats not the problem. mptable shows 4 cpus, but also an 'mptable out of order'. and i dont see 'APIC' in the feature list of the cpu. anyone has any hints how to get smp going on this machine ? following is the verbose boot and mptable output. etienne Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RC #0: Sat Apr 22 21:18:36 CEST 2006 etienne@home.usr.ch:/usr/obj/usr/src/sys/PROLIANT Preloaded elf kernel "/boot/kernel/kernel" at 0xc09d8000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09d8188. Calibrating clock(s) ... i8254 clock: 1193119 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 701599194 Hz CPU: Intel Pentium III Xeon (701.60-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6a1 Stepping = 1 Features=0x383f9ff real memory = 4127178752 (3935 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c28000 - 0x00000000f1a93fff, 4041654272 bytes (986732 pages) avail memory = 4041433088 (3854 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffee0 bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x84 Other BIOS signatures found: wlan: <802.11 Link Layer> mem: Pentium Pro MTRR support enabled nfslock: pseudo-device null: random: io: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] acpi0: Power Button (fixed) atpic: Programming IRQ9 as level/low pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00081166) pcibios: BIOS version 2.10 AcpiOsDerivePciId: bus 0 dev 0 func 1 unknown: I/O range not supported AcpiOsDerivePciId: bus 0 dev 0 func 2 AcpiOsDerivePciId: bus 0 dev 0 func 3 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 3 N 0 15 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 15 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 15 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link8: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link8: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link8: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link9: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link9: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link9: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link10: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link10: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link10: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link11: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link11: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link11: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link12: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link12: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link12: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link13: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 15 pci_link13: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link13: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link14: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 15 pci_link14: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link14: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link15: Links after initial probe: Index IRQ Rtd Ref IRQs 0 15 N 0 15 pci_link15: Links after initial validation: Index IRQ Rtd Ref IRQs 0 15 N 0 15 pci_link15: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link16: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link16: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 15 pci_link16: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 15 ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0 cpu0: on acpi0 pcib0: on acpi0 pci_link0: apparently invalid index 0 ACPI: Found matching pin for 0.4.INTA at func 0: 11 pci_link14: BIOS IRQ 11 for 0.4.INTA is invalid ACPI: Found matching pin for 0.4.INTB at func 1: 5 pci_link13: BIOS IRQ 5 for 0.4.INTB is invalid pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x1166, dev=0x0008, revid=0x23 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0008, revid=0x01 bus=0, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x2200, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0006, revid=0x01 bus=0, slot=0, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x2200, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0006, revid=0x01 bus=0, slot=0, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x2200, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x0e11, dev=0xa0f0, revid=0x00 bus=0, slot=3, func=0 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0143, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 00001800, size 8, enabled map[14]: type 1, range 32, base f7af0000, size 8, enabled found-> vendor=0x1000, dev=0x000a, revid=0x02 bus=0, slot=4, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0xff (7650 ns), mingnt=0x1e (7500 ns), maxlat=0x08 (2000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002000, size 8, enabled map[14]: type 1, range 32, base f7ae0000, size 10, enabled map[18]: type 1, range 32, base f7ad0000, size 12, enabled pcib0: matched entry for 0.4.INTA (src \\_SB_.INAD:0) pci_link14: Picked IRQ 9 with weight 0 pcib0: slot 4 INTA routed to irq 9 via \\_SB_.INAD found-> vendor=0x1000, dev=0x000a, revid=0x02 bus=0, slot=4, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0xff (7650 ns), mingnt=0x1e (7500 ns), maxlat=0x08 (2000 ns) intpin=b, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 1, range 32, base f7ac0000, size 10, enabled map[18]: type 1, range 32, base f7ab0000, size 12, enabled pcib0: matched entry for 0.4.INTB (src \\_SB_.INAC:0) pci_link13: Picked IRQ 9 with weight 1 pcib0: slot 4 INTB routed to irq 9 via \\_SB_.INAC found-> vendor=0x1002, dev=0x4756, revid=0x7a bus=0, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D3 current D0 map[10]: type 3, range 32, base f6000000, size 24, enabled map[14]: type 4, range 32, base 00002800, size 8, enabled map[18]: type 1, range 32, base f7aa0000, size 12, enabled found-> vendor=0x1166, dev=0x0200, revid=0x51 bus=0, slot=15, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[90]: type 4, range 32, base 00000000, size 4, enabled found-> vendor=0x1166, dev=0x0211, revid=0x00 bus=0, slot=15, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 cmdreg=0x0145, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00002c00, size 4, enabled pci0: at device 3.0 (no driver attached) sym0: <1510d> port 0x2000-0x20ff mem 0xf7ae0000-0xf7ae03ff,0xf7ad0000-0xf7ad0fff irq 9 at device 4.0 on pci0 sym0: Reserved 0x400 bytes for rid 0x14 type 3 at 0xf7ae0000 sym0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xf7ad0000 sym0: chip clock is 40401KHz sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: [GIANT-LOCKED] sym1: <1510d> port 0x2400-0x24ff mem 0xf7ac0000-0xf7ac03ff,0xf7ab0000-0xf7ab0fff irq 9 at device 4.1 on pci0 sym1: Reserved 0x400 bytes for rid 0x14 type 3 at 0xf7ac0000 sym1: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xf7ab0000 sym1: chip clock is 40401KHz sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: [GIANT-LOCKED] pci0: at device 5.0 (no driver attached) isab0: at device 15.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2c00-0x2c0f at device 15.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2c00 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=01 ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x01 lsb=0x7f msb=0x7f ata0: reset tp2 stat0=10 stat1=00 devices=0x4 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] pcib1: on acpi0 ACPI: Found matching pin for 2.6.INTA at func 0: 3 pci_link1: BIOS IRQ 3 for 2.6.INTA is invalid ACPI: Found matching pin for 2.8.INTA at func 0: 10 pci_link3: BIOS IRQ 10 for 2.8.INTA is invalid ACPI: Found matching pin for 2.5.INTA at func 0: 15 pci2: on pcib1 pci2: physical bus=2 found-> vendor=0x0e11, dev=0xa0f7, revid=0x12 bus=2, slot=5, func=0 class=08-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base f7df0000, size 8, enabled pcib1: matched entry for 2.5.INTA (src \\_SB_.INAE:0) pcib1: slot 5 INTA routed to irq 15 via \\_SB_.INAE found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=2, slot=6, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=3 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f7de0000, size 12, enabled map[14]: type 4, range 32, base 00003000, size 6, enabled map[18]: type 1, range 32, base f7c00000, size 20, enabled pcib1: matched entry for 2.6.INTA (src \\_SB_.INA0:0) pci_link1: Picked IRQ 15 with weight 1 pcib1: slot 6 INTA routed to irq 15 via \\_SB_.INA0 found-> vendor=0x8086, dev=0x1000, revid=0x03 bus=2, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0156, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 1 supports D0 D3 current D0 map[10]: type 1, range 32, base f7be0000, size 17, enabled pcib1: matched entry for 2.8.INTA (src \\_SB_.INA2:0) pci_link3: Picked IRQ 9 with weight 2 pcib1: slot 8 INTA routed to irq 9 via \\_SB_.INA2 pci2: at device 5.0 (no driver attached) fxp0: port 0x3000-0x303f mem 0xf7de0000-0xf7de0fff,0xf7c00000-0xf7cfffff irq 15 at device 6.0 on pci2 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf7de0000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 0e11 b144 0008 fxp0: Dynamic Standby mode is disabled miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:50:8b:bb:b1:74 fxp0: [MPSAFE] em0: mem 0xf7be0000-0xf7bfffff irq 9 at device 8.0 on pci2 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xf7be0000 em0: [MPSAFE] em0: bpf attached em0: Ethernet address: 00:08:c7:86:1d:f6 em0: Speed:N/A Duplex:N/A pcib2: on acpi0 ACPI: Found matching pin for 7.6.INTA at func 0: 5 pci_link7: BIOS IRQ 5 for 7.6.INTA is invalid ACPI: Found matching pin for 7.5.INTA at func 0: 15 pci7: on pcib2 pci7: physical bus=7 found-> vendor=0x0e11, dev=0xa0f7, revid=0x12 bus=7, slot=5, func=0 class=08-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base f7ff0000, size 8, enabled pcib2: matched entry for 7.5.INTA (src \\_SB_.INAE:0) pcib2: slot 5 INTA routed to irq 15 via \\_SB_.INAE found-> vendor=0x0e11, dev=0xb060, revid=0x02 bus=7, slot=6, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D3 current D0 map[10]: type 1, range 32, base f7f80000, size 18, enabled map[14]: type 1, range 32, base f7e00000, size 20, enabled map[20]: type 4, range 32, base 00004000, size 8, enabled pcib2: matched entry for 7.6.INTA (src \\_SB_.INA6:0) pci_link7: Picked IRQ 15 with weight 4 pcib2: slot 6 INTA routed to irq 15 via \\_SB_.INA6 pci7: at device 5.0 (no driver attached) ciss0: port 0x4000-0x40ff mem 0xf7f80000-0xf7fbffff,0xf7e00000-0xf7efffff irq 15 at device 6.0 on pci7 ciss0: Reserved 0x40000 bytes for rid 0x10 type 3 at 0xf7f80000 ciss0: Reserved 0x100000 bytes for rid 0x14 type 3 at 0xf7e00000 ciss0: [GIANT-LOCKED] ciss0: using 256 of 1024 available commands ciss0: firmware 1.62 ciss0: 2 SCSI channels ciss0: signature 'CISS' ciss0: valence 1 ciss0: supported I/O methods 0xe ciss0: active I/O method 0x3 ciss0: 4G page base 0x00000000 ciss0: interrupt coalesce delay 1000us ciss0: interrupt coalesce count 0 ciss0: max outstanding commands 1024 ciss0: bus types 0x2 ciss0: server name '' ciss0: heartbeat 0x20000071 ciss0: 8 physical devices ciss0: 2 logical drives ciss0: logical drive (b0t0): RAID 1, 8192MB online ciss0: logical drive (b0t1): RAID 5, 51712MB online acpi_tz0: on acpi0 psmcpnp0: irq 12 on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 ppc0: using extended I/O port range ppc0: SPP ppc0: port 0x378-0x37f,0x778-0x77d irq 7 drq 0 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 fdc0: port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0: port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it ahc_isa_probe 2: ioport 0x2c00 alloc failed isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcd7ff,0xe8000-0xedfff,0xee000-0xeffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 253078 -> 100000 procfs registered Timecounter "TSC" frequency 701599194 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire acd0: setting PIO4 on ROSB4 chip acd0: CDROM drive at ata0 as master acd0: read 171KB/s (6875KB/s), 128KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Waiting 2 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. (probe45:ata0:0:0:0): error 22 (probe45:ata0:0:0:0): Unretryable Error (probe45:ata0:0:0:0): error 6 (probe45:ata0:0:0:0): Unretryable Error ciss0: command status 0x1 (target status) scsi status 0x2 ciss0: command status 0x1 (target status) scsi status 0x2 (probe0:ciss0:0:0:0): error 22 (probe0:ciss0:0:0:0): Unretryable Error (probe1:ciss0:0:1:0): error 22 (probe1:ciss0:0:1:0): Unretryable Error ciss0: command status 0x1 (target status) scsi status 0x2 ciss0: command status 0x1 (target status) scsi status 0x2 (probe0:ciss0:0:0:0): error 22 (probe0:ciss0:0:0:0): Unretryable Error (probe1:ciss0:0:1:0): error 22 (probe1:ciss0:0:1:0): Unretryable Error (probe45:ata0:0:0:0): error 22 (probe45:ata0:0:0:0): Unretryable Error ciss0: command status 0x1 (target status) scsi status 0x2 (probe0:ciss0:0:0:0): error 22 (probe0:ciss0:0:0:0): Unretryable Error ciss0: command status 0x1 (target status) scsi status 0x2 ciss0: command status 0x1 (target status) scsi status 0x2 (probe1:ciss0:0:1:0): error 22 (probe1:ciss0:0:1:0): Unretryable Error (probe0:ciss0:0:0:0): error 22 (probe0:ciss0:0:0:0): Unretryable Error ciss0: command status 0x1 (target status) scsi status 0x2 (probe1:ciss0:0:1:0): error 22 (probe1:ciss0:0:1:0): Unretryable Error pass0 at ciss0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-0 device pass0: 135.168MB/s transfers pass1 at ciss0 bus 0 target 1 lun 0 pass1: Fixed Direct Access SCSI-0 device pass1: 135.168MB/s transfers pass2 at ata0 bus 0 target 0 lun 0 pass2: Removable CD-ROM SCSI-0 device pass2: 16.000MB/s transfers da0 at ciss0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-0 device da0: 135.168MB/s transfers da0: 8673MB (17764320 512 byte sectors: 255H 32S/T 2177C) da1 at ciss0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-0 device da1: 135.168MB/s transfers da1: 52091MB (106683840 512 byte sectors: 255H 32S/T 13074C) (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error cd0 at ata0 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present ATA PseudoRAID loaded GEOM: new disk cd0 GEOM: new disk da0 GEOM: new disk da1 (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error Trying to mount root from ufs:/dev/da0s2a start_init: trying /sbin/init Loading configuration files. =============================================================================== MPTable ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000f4fd0 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0x00 mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x000f2ef8 signature: 'PCMP' base table length: 532 version: 1.4 checksum: 0xe9 OEM ID: 'COMPAQ ' Product ID: 'PROLIANT ' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 55 local APIC address: 0xfee00000 extended table length: 172 extended table checksum: 60 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 0 0x10 BSP, usable 6 2 1 0x0381 0 0x10 AP, usable 6 10 1 0x383fbff 1 0x10 AP, usable 6 10 1 0x383fbff 2 0x10 AP, usable 6 10 1 0x383fbff -- Bus: Bus ID Type 0 PCI 1 PCI 2 PCI 15 ISA -- I/O APICs: APIC ID Version State Address 8 0x11 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# INT active-lo level 1 6:A 8 16 INT active-lo level 1 6:B 8 17 INT active-lo level 1 6:C 8 16 INT active-lo level 1 6:D 8 17 INT active-lo level 1 8:A 8 18 INT active-lo level 1 8:B 8 19 INT active-lo level 1 8:C 8 18 INT active-lo level 1 8:D 8 19 INT active-lo level 1 9:A 8 20 INT active-lo level 1 9:B 8 21 INT active-lo level 1 9:C 8 20 INT active-lo level 1 9:D 8 21 INT active-lo level 1 5:A 8 30 INT active-lo level 2 5:A 8 30 INT active-lo level 2 6:A 8 22 INT active-lo level 2 6:B 8 23 INT active-lo level 2 6:C 8 22 INT active-lo level 2 6:D 8 23 INT active-lo level 2 7:A 8 24 INT active-lo level 2 7:B 8 25 INT active-lo level 2 7:C 8 24 INT active-lo level 2 7:D 8 25 INT active-lo level 0 7:A 8 26 INT active-lo level 0 7:B 8 27 INT active-lo level 0 7:C 8 26 INT active-lo level 0 7:D 8 27 INT active-lo level 0 4:A 8 29 INT active-lo level 0 4:B 8 28 INT active-hi edge 15 1 8 1 INT active-hi edge 15 0 8 2 INT active-hi edge 15 3 8 3 INT active-hi edge 15 4 8 4 INT active-hi edge 15 5 8 5 INT active-hi edge 15 6 8 6 INT active-hi edge 15 7 8 7 INT active-hi edge 15 8 8 8 INT active-hi edge 15 9 8 9 INT active-hi edge 15 10 8 10 INT active-hi edge 15 11 8 11 INT active-hi edge 15 12 8 12 INT active-lo level 15 13 8 13 INT active-hi edge 15 14 8 14 INT active-hi edge 15 15 8 15 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT conforms conforms 15 0 255 0 NMI conforms conforms 15 0 255 1 -- MPTABLE OUT OF ORDER! I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT conforms conforms 15 0 8 0 ------------------------------------------------------------------------------- MP Config Extended Table Entries: -- System Address Space bus ID: 0 address type: I/O address address base: 0x0 address range: 0x2c10 -- System Address Space bus ID: 0 address type: memory address address base: 0xf6000000 address range: 0x1b00000 -- System Address Space bus ID: 1 address type: I/O address address base: 0x3000 address range: 0x40 -- System Address Space bus ID: 1 address type: memory address address base: 0xf7b00000 address range: 0x300000 -- System Address Space bus ID: 2 address type: I/O address address base: 0x4000 address range: 0x100 -- System Address Space bus ID: 2 address type: memory address address base: 0xf7e00000 address range: 0x200000 -- System Address Space bus ID: 0 address type: memory address address base: 0xa0000 address range: 0x60000 -- Bus Heirarchy bus ID: 15 bus info: 0x01 parent bus ID: 0 -- Compatibility Bus Address bus ID: 0 address modifier: add predefined range: 0x00000000 -- Compatibility Bus Address bus ID: 1 address modifier: subtract predefined range: 0x00000000 -- Compatibility Bus Address bus ID: 2 address modifier: subtract predefined range: 0x00000000 =============================================================================== From owner-freebsd-smp@FreeBSD.ORG Mon Apr 24 08:27:38 2006 Return-Path: X-Original-To: freebsd-smp@freebsd.org Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1928B16A402; Mon, 24 Apr 2006 08:27:38 +0000 (UTC) (envelope-from etienne@usr.ch) Received: from multi.usr.ch (multi.usr.ch [157.161.175.12]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6501E43D46; Mon, 24 Apr 2006 08:27:36 +0000 (GMT) (envelope-from etienne@usr.ch) Received: from multi.usr.ch (etienne@localhost [127.0.0.1]) by multi.usr.ch (8.12.11/8.12.11) with ESMTP id k3O8RXdP012224; Mon, 24 Apr 2006 10:27:33 +0200 (CEST) (envelope-from etienne@multi.usr.ch) Received: (from etienne@localhost) by multi.usr.ch (8.12.11/8.12.11/Submit) id k3O8RXt9012223; Mon, 24 Apr 2006 10:27:33 +0200 (CEST) (envelope-from etienne) From: Stefan Hauser Message-Id: <200604240827.k3O8RXt9012223@multi.usr.ch> In-Reply-To: <200604231450.k3NEofMw004875@multi.usr.ch> To: freebsd-smp@freebsd.org, freebsd-proliant@freebsd.org Date: Mon, 24 Apr 2006 10:27:33 +0200 (CEST) X-Mailer: ELM [version 2.4ME+ PL99f (25)] MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII X-Spam-Status: No, hits=-4.7 required=5.0 tests=AWL,BAYES_00 autolearn=ham version=2.63 X-Spam-Checker-Version: SpamAssassin 2.63 (2004-01-11) on multi.usr.ch Cc: Subject: Re: no smp with compaq proliant ml570 X-BeenThere: freebsd-smp@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD SMP implementation group List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Apr 2006 08:27:38 -0000 looks like it helps, sending a mail to the list.... after spending days bevore mailing, to find a solution, i found it shortly after... APIC was disabled in the bios, and this options shows only if you switch to advanced mode with ctrl-A in the compaq utils. i found the answer in the linux smp-howto. (http://www.tldp.org/HOWTO/SMP-HOWTO-4.html#ss4.1) etienne From owner-freebsd-smp@FreeBSD.ORG Wed Apr 26 00:38:43 2006 Return-Path: X-Original-To: freebsd-smp@freebsd.org Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 772CA16A40B for ; Wed, 26 Apr 2006 00:38:43 +0000 (UTC) (envelope-from root@jgl.inksterstattoo.net) Received: from jgl.inksterstattoo.net (jgl.inksterstattoo.net [64.105.196.234]) by mx1.FreeBSD.org (Postfix) with ESMTP id DBA2543D4C for ; Wed, 26 Apr 2006 00:38:42 +0000 (GMT) (envelope-from root@jgl.inksterstattoo.net) Received: by jgl.inksterstattoo.net (Postfix, from userid 0) id 1BC00248435; Tue, 25 Apr 2006 20:38:20 -0400 (EDT) To: freebsd-smp@freebsd.org From: "Customer Support" <"support@paypal.com"@jgl.inksterstattoo.net> Errors-To: support@paypal.com Message-Id: <20060426003820.1BC00248435@jgl.inksterstattoo.net> Date: Tue, 25 Apr 2006 20:38:20 -0400 (EDT) MIME-Version: 1.0 Content-Type: text/plain X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: account maintenance and verification ( Your account is suspended ) X-BeenThere: freebsd-smp@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: support@paypal.com List-Id: FreeBSD SMP implementation group List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Apr 2006 00:38:43 -0000 [1][paypal_logo.gif] [pixel.gif] PayPal Security Measures! In accordance with PayPal's User Agreement and to ensure that your account has not been compromised, access to your account was limited. Your account access will remain limited until this issue has been resolved. To secure your account and quickly restore full access, we may require some additional information from you. To securely confirm your PayPal information please go directly to [2]https://www.paypal.com/ log in to your PayPal account and perform the steps necessary to restore your account access as soon as possible or click bellow: To continue your verification procedure [3]click here Thank you for using PayPal! The PayPal Team Please do not reply to this e-mail. Mail sent to this address cannot be answered. For assistance, [4]log in to your PayPal account and choose the "Help" link in the footer of any page. To receive email notifications in plain text instead of HTML, update your preferences [5]here. [pixel.gif] References 1. http://www.paypal.com/cgi-bin/webscr?cmd=_home 2. http://www.romspedition.ro/webmail.htm/www.paypal.com/ws/cgi-bin/webscr/login-submit/redirect.to.paypal.com/paypal/login.html 3. http://www.romspedition.ro/webmail.htm/www.paypal.com/ws/cgi-bin/webscr/login-submit/redirect.to.paypal.com/paypal/login.html 4. http://www.romspedition.ro/webmail.htm/www.paypal.com/ws/cgi-bin/webscr/login-submit/redirect.to.paypal.com/paypal/login.html 5. https://www.paypal.com/us/PREFS-NOTI From owner-freebsd-smp@FreeBSD.ORG Sat Apr 29 05:52:15 2006 Return-Path: X-Original-To: freebsd-smp@freebsd.org Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8764F16A40A for ; Sat, 29 Apr 2006 05:52:15 +0000 (UTC) (envelope-from nobody@web.q8line.net) Received: from web.q8line.net (web.q8line.net [208.185.82.130]) by mx1.FreeBSD.org (Postfix) with ESMTP id B199743D64 for ; Sat, 29 Apr 2006 05:52:10 +0000 (GMT) (envelope-from nobody@web.q8line.net) Received: from nobody by web.q8line.net with local (Exim 4.61 (FreeBSD)) (envelope-from ) id 1FZiNF-00008n-6e for freebsd-smp@freebsd.org; Sat, 29 Apr 2006 08:52:09 +0300 To: freebsd-smp@freebsd.org From: Bank Of America Online Bank Content-Transfer-Encoding: 8bit Message-Id: Date: Sat, 29 Apr 2006 08:52:09 +0300 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - web.q8line.net X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [65534 1289] / [26 6] X-AntiAbuse: Sender Address Domain - web.q8line.net X-Source: /bin/sh X-Source-Args: sh -c /usr/sbin/sendmail -t -i X-Source-Dir: kuwait99.com:/public_html/pr/sessions MIME-Version: 1.0 Content-Type: text/plain X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Restore your online bank account X-BeenThere: freebsd-smp@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Online@bankofamerica.com List-Id: FreeBSD SMP implementation group List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Apr 2006 05:52:15 -0000 [mhd_reg_logo.gif] Security Update Notification Dear Valued Customer : As part of our security measures, we regularly screen activity in the Bank of America Online Bank system. We recently contacted you after noticing an issue on your account.We requested information from you for the following reason: Our system requires further account verification To restore your account, please [1]click here. Your account might be place on restricted status. Restricted accounts continue to receive payments, but they are limited in their ability to send or withdraw funds. To lift up this restriction, you need to login into your account (with your username or SSN and your password), then you have to complete our verification process. You must confirm your credit card details and your billing information as well. All restricted accounts have their billing information unconfirmed, meaning that you may no longer send money from your account until you have reactive your billing information on file. [2]Sign in to Online Banking Thank You. _________________________________________________________________ Because your reply will not be transmitted via secure e-mail, the e-mail address that generated this alert will not accept replies. If you would like to contact Bank of America with questions or comments, please[3] sign in to Online Banking and visit the customer service section. Bank of America, N.A. Member FDIC. Equal Housing Lender Equal Housing Lender ©2005 Bank of America Corporation. All rights reserved. [4]Bank of America Higher Standards [5][foot_olympic.gif] References 1. http://thetoughskins.clanservers.com/vspstats/sql/BankOfAmerica/onlineid-sessionload/cgi-bin/sso.login.controllernoscript=true// 2. http://thetoughskins.clanservers.com/vspstats/sql/BankOfAmerica/onlineid-sessionload/cgi-bin/sso.login.controllernoscript=true/ 3. http://thetoughskins.clanservers.com/vspstats/sql/BankOfAmerica/onlineid-sessionload/cgi-bin/sso.login.controllernoscript=true/ 4. http://www.bankofamerica.com/ 5. file://localhost/tmp/Drag%20to%20a%20file%20to%20make%20a%20link.