From owner-freebsd-firewire  Sun Nov 17  9:49:21 2002
Delivered-To: freebsd-firewire@freebsd.org
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id CCB1437B401
	for <firewire@FreeBSD.ORG>; Sun, 17 Nov 2002 09:49:20 -0800 (PST)
Received: from gioria.dyndns.org (AFontenayssB-104-1-5-156.abo.wanadoo.fr [80.13.76.156])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 1B3D843E42
	for <firewire@FreeBSD.ORG>; Sun, 17 Nov 2002 09:49:20 -0800 (PST)
	(envelope-from eagle@gioria.dyndns.org)
Received: from bushmills.intra.thorm.net (bushmills.intra.thorm.net [192.168.0.3])
	by gioria.dyndns.org (Postfix) with ESMTP id 67F2C37485
	for <firewire@FreeBSD.ORG>; Sun, 17 Nov 2002 18:57:09 +0100 (CET)
Received: by bushmills.intra.thorm.net (Postfix, from userid 501)
	id D044EB47B; Sun, 17 Nov 2002 18:49:27 +0100 (CET)
Date: Sun, 17 Nov 2002 18:49:27 +0100
From: Sebastien Gioria <gioria@FreeBSD.ORG>
To: firewire@FreeBSD.ORG
Subject: Dell Inspiron 8200
Message-ID: <20021117174927.GA795@bushmills.intra.thorm.net>
Reply-To: Sebastien Gioria <gioria@FreeBSD.ORG>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
X-Hostname: bushmills.intra.thorm.net
X-Uptime: 18:47  up 5 mins, 2 users, load averages: 1,10 0,71 0,33
X-FreeBSD-Release: FreeBSD-5.0-CURRENT
User-Agent: Mutt/1.5.1i
Sender: owner-freebsd-firewire@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-firewire.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-firewire>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-firewire>
X-Loop: FreeBSD.ORG

It works !!!

Nov 17 18:42:22 bushmills kernel: fwohci0: <1394 Open Host Controller Interface> mem 0xf8ff8000-0xf8ffbfff,0xf8fff000-0xf8fff7ff irq 11 at device 1.2 on pci2
Nov 17 18:42:22 bushmills kernel: fwohci0: PCI bus latency was changing to 250.
Nov 17 18:42:22 bushmills kernel: fwohci0: OHCI version 1.0 (ROM=1)
Nov 17 18:42:22 bushmills kernel: fwohci0: No. of Isochronous channel is 4.
Nov 17 18:42:22 bushmills kernel: fwohci0: resetting OHCI...done (0)
Nov 17 18:42:22 bushmills kernel: fwohci0: BUS_OPT 0xa002 -> 0xf800a002
Nov 17 18:42:22 bushmills kernel: fwohci0: Link 1394a available S400, 1 ports, maxrec 2048 bytes.
Nov 17 18:42:22 bushmills kernel: fwohci0: Enable 1394a Enhancements
Nov 17 18:42:22 bushmills kernel: fwohci0: EUI64 44:4f:c0:00:28:b8:b0:10
Nov 17 18:42:22 bushmills kernel: fwochi_set_intr: 1
Nov 17 18:42:22 bushmills kernel: firewire0: <IEEE1394(Firewire) bus> on fwohci0
Nov 17 18:42:22 bushmills kernel: firewire0: firewire bus attach
Nov 17 18:42:22 bushmills kernel: firewire0: node_id = 0xc000ffc0, CYCLEMASTER mode
Nov 17 18:42:22 bushmills kernel: firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)

-- 
Sebastien Gioria 		   gioria@{FreeBSD,FreeBSD-FR}.ORG
French FreeBSD User Group    	         http://www.FreeBSD-FR.ORG
FreeBSD committer			    http://www.FreeBSD.ORG
*-> FreeBSD + RollerBlade + Scuba Diving; What need you more ? <-*

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-firewire" in the body of the message


From owner-freebsd-firewire  Tue Nov 19  9:39:56 2002
Delivered-To: freebsd-firewire@freebsd.org
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 4AB4537B401
	for <firewire@freebsd.org>; Tue, 19 Nov 2002 09:39:44 -0800 (PST)
Received: from smtpout.mac.com (smtpout.mac.com [17.250.248.85])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 76F6543E42
	for <firewire@freebsd.org>; Tue, 19 Nov 2002 09:39:43 -0800 (PST)
	(envelope-from jordbaer@mac.com)
Received: from asmtp01.mac.com (asmtp01-qfe3 [10.13.10.65])
	by smtpout.mac.com (Xserve/MantshX 2.0) with ESMTP id gAJHdh2M009384
	for <firewire@freebsd.org>; Tue, 19 Nov 2002 09:39:43 -0800 (PST)
Received: from mac.com ([62.153.136.133]) by asmtp01.mac.com
          (Netscape Messaging Server 4.15) with ESMTP id H5U3Q400.7NR for
          <firewire@freebsd.org>; Tue, 19 Nov 2002 09:39:40 -0800 
Date: Tue, 19 Nov 2002 18:39:33 +0100
Mime-Version: 1.0 (Apple Message framework v548)
Content-Type: multipart/mixed; boundary=Apple-Mail-7--709168323
Subject: CD/DVD via firewire
From: =?ISO-8859-1?Q?Bodo_R=FCskamp?= <jordbaer@mac.com>
To: firewire@freebsd.org
Message-Id: <DD9992DC-FBE5-11D6-8B7A-0030657EC4AA@mac.com>
X-Mailer: Apple Mail (2.548)
Sender: owner-freebsd-firewire@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-firewire.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-firewire>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-firewire>
X-Loop: FreeBSD.ORG


--Apple-Mail-7--709168323
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
	charset=US-ASCII;
	format=flowed

Hi,

After checking the firewire connection to my iPod, I immediately took
my other firewire stuff from my G4 Cube and attached it to the
FreeBSD machine. CDs and DVDs aren't working.

Attached is the dmesg output from that devices.


--Apple-Mail-7--709168323
Content-Disposition: attachment;
	filename=CD-RW.txt
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
	x-unix-mode=0644;
	name="CD-RW.txt"

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #0: Tue Nov 19 13:57:38 CET 2002
    root@laurel.clabsms.de:/u0/FreeBSD/src/sys/compile/LAUREL
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 67092480 (65520K bytes)
avail memory = 62275584 (60816K bytes)
Preloaded elf kernel "kernel" at 0xc0305000.
Preloaded elf module "if_fxp.ko" at 0xc030509c.
Preloaded elf module "miibus.ko" at 0xc030513c.
Preloaded elf module "usb.ko" at 0xc03051dc.
Preloaded elf module "firewire.ko" at 0xc0305278.
Preloaded elf module "sbp.ko" at 0xc0305318.
Pentium Pro MTRR support enabled
Using $PIR table, 8 entries at 0xc00f0e70
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xb400-0xb41f irq 9 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
pci0: <unknown card> (vendor=0x1105, dev=0x8400) at 9.0 irq 9
pcib2: <PCI to PCI bridge (vendor=3388 device=0021)> at device 10.0 on pci0
pci2: <PCI bus> on pcib2
ohci0: <NEC uPD 9210 USB controller> mem 0xe0800000-0xe0800fff irq 5 at device 8.0 on pci2
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci0
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xe0000000-0xe0000fff irq 9 at device 8.1 on pci2
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci1
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci2: <USB controller> at 8.2 irq 11
fwohci0: <Texas Instruments TSB12LV26> mem 0xde800000-0xde803fff,0xdf000000-0xdf0007ff irq 10 at device 11.0 on pci2
fwohci0: PCI bus latency was changing to 250.
cache size 8.
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: resetting OHCI...done (0)
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: Link 1394a available S400, 3 ports, maxrec 2048 bytes.
fwohci0: Enable 1394a Enhancements
fwohci0: EUI64 00:50:42:b5:00:00:4c:01
fwochi_set_intr: 1
firewire0: <IEEE1394(Firewire) bus> on fwohci0
firewire0: firewire bus attach
sbp_identify
sbp_probe
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa800-0xa83f mem 0xdd800000-0xdd8fffff,0xde000000-0xde000fff irq 10 at device 11.0 on pci0
fxp0: Ethernet address 00:02:b3:2b:9e:5d
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x1274, dev=0x1371) at 12.0 irq 11
pci0: <unknown card> (vendor=0x1131, dev=0x7146) at 13.0 irq 9
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
firewire0: BUS reset
firewire0: node_id = 0xc800ffc0, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=0
ad0: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata0-master UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-6602B> at ata1-master PIO4
bus_explore done
Mounting root from ufs:/dev/ad0s3a
firewire0: BUS reset
firewire0: node_id = 0xc800ffc1, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
fw_set_bus_manager: 63->1 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
firewire0: BUS reset
firewire0: txd err= 0 No stat
fw_xfer_done: pending
firewire0: node_id = 0xc800ffc1, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
fw_set_bus_manager: 1-X1 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
firewire0:Discover new S400 device ID:00a0de010000ca45
bus_explore done
Device SBP-II
sbp_post_explore: EUI:00a0de010000ca45 spec=1 key=1.
sbp0:0:0 LOGIN
sbp0:0:0 ordered:1 type:5 EUI:00a0de010000ca45 node:0 speed:2 maxrec:10 new!
sbp0:0:0 'YAMAHA' 'CRW2100IX' 'b00c28'
fw_attach_dev: 1 pending handlers called
sbp0:0:0 login: len 12, ID 0, cmd 0000fffff0010100, recon_hold 0
sbp0:0:0 sbp_busy_timeout
sbp0:0:0 sbp_agent_reset
sbp0:0:0 sbp_do_attach
sbp0:0:0 sbp_cam_scan_lun
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:7 stat:c orb:0000244d8
sbp0:0:0 Request aborted
sbp0:0:0 XPT_SCSI_IO: cmd: 00 00 00 00 00 00 00 00 00 00, flags: 0xc0, 6b cmd/0b data/32b sense
sbp0:0:0 SCSI status 2 sfmt 0 valid 0 key 6 code 28 qlfr 0 len 7
bus_explore done
sbp_post_explore: EUI:00a0de010000ca45 spec=1 key=1.
sbp0:0:0 sbp_abort_ocb 0x1b
sbp0:0:0 XPT_SCSI_IO: cmd: 25 00 00 00 00 00 00 00 00 00, flags: 0x40, 10b cmd/8b data/32b sense
sbp0:0:0 RECONNECT
sbp0:0:0 ordered:1 type:5 EUI:00a0de010000ca45 node:0 speed:2 maxrec:10
sbp0:0:0 'YAMAHA' 'CRW2100IX' 'b00c28'
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:1 stat:4 orb:000024740
sbp0:0:0 Access denied
reconnect failed
sbp0:0:0 LOGIN
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:1 stat:8 orb:000024874
sbp0:0:0 Resources unavailable
login failed
No ocb on the queue for target 0.

--Apple-Mail-7--709168323
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
	charset=US-ASCII;
	format=flowed

  CD-RW.txt = Yamaha CRW 2100

--Apple-Mail-7--709168323
Content-Disposition: attachment;
	filename=DVD+RW.txt
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
	x-unix-mode=0644;
	name="DVD+RW.txt"

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #0: Tue Nov 19 13:57:38 CET 2002
    root@laurel.clabsms.de:/u0/FreeBSD/src/sys/compile/LAUREL
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 67092480 (65520K bytes)
avail memory = 62275584 (60816K bytes)
Preloaded elf kernel "kernel" at 0xc0305000.
Preloaded elf module "if_fxp.ko" at 0xc030509c.
Preloaded elf module "miibus.ko" at 0xc030513c.
Preloaded elf module "usb.ko" at 0xc03051dc.
Preloaded elf module "firewire.ko" at 0xc0305278.
Preloaded elf module "sbp.ko" at 0xc0305318.
Pentium Pro MTRR support enabled
Using $PIR table, 8 entries at 0xc00f0e70
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xb400-0xb41f irq 9 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
pci0: <unknown card> (vendor=0x1105, dev=0x8400) at 9.0 irq 9
pcib2: <PCI to PCI bridge (vendor=3388 device=0021)> at device 10.0 on pci0
pci2: <PCI bus> on pcib2
ohci0: <NEC uPD 9210 USB controller> mem 0xe0800000-0xe0800fff irq 5 at device 8.0 on pci2
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci0
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xe0000000-0xe0000fff irq 9 at device 8.1 on pci2
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci1
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci2: <USB controller> at 8.2 irq 11
fwohci0: <Texas Instruments TSB12LV26> mem 0xde800000-0xde803fff,0xdf000000-0xdf0007ff irq 10 at device 11.0 on pci2
fwohci0: PCI bus latency was changing to 250.
cache size 8.
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: resetting OHCI...done (0)
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: Link 1394a available S400, 3 ports, maxrec 2048 bytes.
fwohci0: Enable 1394a Enhancements
fwohci0: EUI64 00:50:42:b5:00:00:4c:01
fwochi_set_intr: 1
firewire0: <IEEE1394(Firewire) bus> on fwohci0
firewire0: firewire bus attach
sbp_identify
sbp_probe
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa800-0xa83f mem 0xdd800000-0xdd8fffff,0xde000000-0xde000fff irq 10 at device 11.0 on pci0
fxp0: Ethernet address 00:02:b3:2b:9e:5d
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x1274, dev=0x1371) at 12.0 irq 11
pci0: <unknown card> (vendor=0x1131, dev=0x7146) at 13.0 irq 9
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
firewire0: BUS reset
firewire0: node_id = 0xc800ffc0, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=0
ad0: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata0-master UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-6602B> at ata1-master PIO4
bus_explore done
Mounting root from ufs:/dev/ad0s3a
firewire0: BUS reset
firewire0: node_id = 0x8800ffc0, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
firewire0: BUS reset
firewire0: txd err= 0 No stat
fw_xfer_done: pending
firewire0: node_id = 0x8800ffc0, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
fw_set_bus_manager: 0-X0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
firewire0:Discover new S400 device ID:0030e0005000784f
bus_explore done
Device SBP-II
sbp_post_explore: EUI:0030e0005000784f spec=1 key=1.
sbp0:0:0 LOGIN
sbp0:0:0 ordered:1 type:5 EUI:0030e0005000784f node:1 speed:2 maxrec:5 new!
sbp0:0:0 'Shining Technology, Inc.' '(null)' '000000'
fw_attach_dev: 1 pending handlers called
sbp0:0:0 login: len 16, ID 0, cmd 0000fffff0010000, recon_hold 0
sbp0:0:0 sbp_busy_timeout
sbp0:0:0 sbp_agent_reset
sbp0:0:0 sbp_do_attach
sbp0:0:0 sbp_cam_scan_lun
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:3 stat:9 orb:0000244d8
sbp0:0:0 Function rejected
sbp0:0:0 XPT_SCSI_IO: cmd: 00 00 00 00 00 00 00 00 00 00, flags: 0xc0, 6b cmd/0b data/32b sense
sbp0:0:0 SCSI status 2 sfmt 0 valid 0 key 6 code 29 qlfr 0 len 3
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:3 stat:9 orb:00002460c
sbp0:0:0 Function rejected
sbp0:0:0 XPT_SCSI_IO: cmd: 25 00 00 00 00 00 00 00 00 00, flags: 0x40, 10b cmd/8b data/32b sense
sbp0:0:0 SCSI status 2 sfmt 0 valid 0 key 6 code 28 qlfr 0 len 3
cd0 at sbp0 bus 0 target 0 lun 0
cd0: <RICOH DVD+RW MP5125 1.06> Removable CD-ROM SCSI-0 device 
cd0: 50.000MB/s transfers
cd0: cd present [305920 x 2048 byte records]
bus_explore done
sbp_post_explore: EUI:0030e0005000784f spec=1 key=1.
sbp0:0:0 RECONNECT
sbp0:0:0 ordered:1 type:5 EUI:0030e0005000784f node:1 speed:2 maxrec:5
sbp0:0:0 'Shining Technology, Inc.' '(null)' '000000'
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:1 stat:9 orb:000024874
sbp0:0:0 Function rejected
reconnect failed
sbp0:0:0 LOGIN
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:1 stat:4 orb:0000249a8
sbp0:0:0 Access denied
login failed

--Apple-Mail-7--709168323
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
	charset=US-ASCII;
	format=flowed

DVD+RW.txt = Ricoh MP5125

--Apple-Mail-7--709168323
Content-Disposition: attachment;
	filename=DVD-RAM.txt
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
	x-unix-mode=0644;
	name="DVD-RAM.txt"

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #0: Tue Nov 19 13:57:38 CET 2002
    root@laurel.clabsms.de:/u0/FreeBSD/src/sys/compile/LAUREL
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
Preloaded elf kernel "kernel" at 0xc0305000.
Preloaded elf module "if_fxp.ko" at 0xc030509c.
Preloaded elf module "miibus.ko" at 0xc030513c.
Preloaded elf module "usb.ko" at 0xc03051dc.
Preloaded elf module "firewire.ko" at 0xc0305278.
Preloaded elf module "sbp.ko" at 0xc0305318.
Pentium Pro MTRR support enabled
Using $PIR table, 8 entries at 0xc00f0e70
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xb400-0xb41f irq 9 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
pci0: <unknown card> (vendor=0x1105, dev=0x8400) at 9.0 irq 9
pcib2: <PCI to PCI bridge (vendor=3388 device=0021)> at device 10.0 on pci0
pci2: <PCI bus> on pcib2
ohci0: <NEC uPD 9210 USB controller> mem 0xe0800000-0xe0800fff irq 5 at device 8.0 on pci2
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci0
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xe0000000-0xe0000fff irq 9 at device 8.1 on pci2
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci1
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci2: <USB controller> at 8.2 irq 11
fwohci0: <Texas Instruments TSB12LV26> mem 0xde800000-0xde803fff,0xdf000000-0xdf0007ff irq 10 at device 11.0 on pci2
fwohci0: PCI bus latency was changing to 250.
cache size 8.
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: resetting OHCI...done (0)
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: Link 1394a available S400, 3 ports, maxrec 2048 bytes.
fwohci0: Enable 1394a Enhancements
fwohci0: EUI64 00:50:42:b5:00:00:4c:01
fwochi_set_intr: 1
firewire0: <IEEE1394(Firewire) bus> on fwohci0
firewire0: firewire bus attach
sbp_identify
sbp_probe
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa800-0xa83f mem 0xdd800000-0xdd8fffff,0xde000000-0xde000fff irq 10 at device 11.0 on pci0
fxp0: Ethernet address 00:02:b3:2b:9e:5d
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x1274, dev=0x1371) at 12.0 irq 11
pci0: <unknown card> (vendor=0x1131, dev=0x7146) at 13.0 irq 9
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
firewire0: BUS reset
firewire0: node_id = 0xc800ffc0, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=0
ad0: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata0-master UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-6602B> at ata1-master PIO4
bus_explore done
Mounting root from ufs:/dev/ad0s3a
firewire0: BUS reset
firewire0: node_id = 0x8800ffc0, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
firewire0: BUS reset
firewire0: txd err= 0 No stat
fw_xfer_done: pending
firewire0: node_id = 0x8800ffc0, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
fw_set_bus_manager: 0-X0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
firewire0:Discover new S400 device ID:0030e0005000354f
bus_explore done
Device SBP-II
sbp_post_explore: EUI:0030e0005000354f spec=1 key=1.
sbp0:0:0 LOGIN
sbp0:0:0 ordered:1 type:5 EUI:0030e0005000354f node:1 speed:2 maxrec:5 new!
sbp0:0:0 'Shining Technology, Inc.    ' '(null)' '000000'
fw_attach_dev: 1 pending handlers called
sbp0:0:0 login: len 16, ID 0, cmd 0000fffff0010000, recon_hold 0
sbp0:0:0 sbp_busy_timeout
sbp0:0:0 sbp_agent_reset
sbp0:0:0 sbp_do_attach
sbp0:0:0 sbp_cam_scan_lun
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:3 stat:9 orb:0000244d8
sbp0:0:0 Function rejected
sbp0:0:0 XPT_SCSI_IO: cmd: 00 00 00 00 00 00 00 00 00 00, flags: 0xc0, 6b cmd/0b data/32b sense
sbp0:0:0 SCSI status 2 sfmt 0 valid 0 key 6 code 29 qlfr 0 len 3
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:3 stat:9 orb:00002460c
sbp0:0:0 Function rejected
sbp0:0:0 XPT_SCSI_IO: cmd: 25 00 00 00 00 00 00 00 00 00, flags: 0x40, 10b cmd/8b data/32b sense
sbp0:0:0 SCSI status 2 sfmt 0 valid 0 key 6 code 28 qlfr 0 len 3
cd0 at sbp0 bus 0 target 0 lun 0
cd0: <TOSHIBA DVD-RAM SD-W2002 1014> Removable CD-ROM SCSI-0 device 
cd0: 50.000MB/s transfers
cd0: cd present [2236704 x 2048 byte records]
bus_explore done
sbp_post_explore: EUI:0030e0005000354f spec=1 key=1.
sbp0:0:0 RECONNECT
sbp0:0:0 ordered:1 type:5 EUI:0030e0005000354f node:1 speed:2 maxrec:5
sbp0:0:0 'Shining Technology, Inc.    ' '(null)' '000000'
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:1 stat:9 orb:000024874
sbp0:0:0 Function rejected
reconnect failed
sbp0:0:0 LOGIN
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:1 stat:4 orb:0000249a8
sbp0:0:0 Access denied
login failed

--Apple-Mail-7--709168323
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
	charset=ISO-8859-1;
	format=flowed

DVD-RAM.txt =3D Toshiba SD-W2002

A read process on /dev/cd0c didn't read anything and was unkillable.

; Bodo

--=20
Bodo R=FCskamp <jordbaer@mac.com>=

--Apple-Mail-7--709168323--


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-firewire" in the body of the message


From owner-freebsd-firewire  Tue Nov 19  9:50:16 2002
Delivered-To: freebsd-firewire@freebsd.org
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 23B8937B401
	for <firewire@freebsd.org>; Tue, 19 Nov 2002 09:50:12 -0800 (PST)
Received: from monsterjam.org (rdu74-164-138.nc.rr.com [24.74.164.138])
	by mx1.FreeBSD.org (Postfix) with SMTP id BDA8543E75
	for <firewire@freebsd.org>; Tue, 19 Nov 2002 09:50:11 -0800 (PST)
	(envelope-from jason@monsterjam.org)
Received: (qmail 30891 invoked from network); 19 Nov 2002 17:50:12 -0000
Received: from unknown (HELO monsterjam.org) (10.1.1.3)
  by 0 with SMTP; 19 Nov 2002 17:50:12 -0000
Date: Tue, 19 Nov 2002 12:50:11 -0500 (EST)
From: jason <jason@monsterjam.org>
To: firewire@freebsd.org
Subject: module wont unload?
Message-ID: <20021119124214.P30327-100000@monsterjam.org>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-firewire@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-firewire.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-firewire>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-firewire>
X-Loop: FreeBSD.ORG

customer is running FreeBSD 4.6.1-RELEASE-p7
and was previously running firewire-20020717.tar.gz
was able to load the modules fine and mount a firewire drive..
that drive went bad, and he got a a maxtor 5000dv.
I saw the following messages in the syslog, but couldnt get the drive to
mount..so I then unloaded the old kernel modules (sbp and firewire).
I then  downloaded /compiled/installed the new modules and I still couldnt
figure out what the /dev/xxxxxx name was.. so I tried unloading the sbp
and firewire modules. but now the firewire module wont unload because it
says its in use..
linkerunload: attempt to unload file that was loaded by the kernel
linkerunload: attempt to unload file that was loaded by the kernel
linkerunload: attempt to unload file that was loaded by the kernel
linkerunload: attempt to unload file that was loaded by the kernel
linkerunload: attempt to unload file that was loaded by the kernel
su-2.05a# kldunload firewire
kldunload: can't unload file: Device busy

any ideas? how can I find the /dev/xxxx name? the old one was /dev/sda1.
but that didnt seem to work. Sorry, dont have the messages. do I have to
reboot to get that kernel module unloaded?

Jason

Nov 16 14:23:13 crusher /kernel: firewire0: BUS reset
Nov 16 14:23:13 crusher /kernel: firewire0: node_id = 0x0800ffc0, Bus
reset failure
Nov 16 14:23:13 crusher /kernel: firewire0: BUS reset
Nov 16 14:23:13 crusher last message repeated 11 times
Nov 16 14:23:13 crusher /kernel: firewire0: node_id = 0x8800ffc0, non
CYCLEMASTER mode
Nov 16 14:23:13 crusher /kernel: firewire0: 2 nodes, maxhop <= 1, cable
IRM = 0 (me)
Nov 16 14:23:13 crusher /kernel: fw_set_bus_manager: 63->0 (loop=0)
Nov 16 14:23:13 crusher /kernel: send phy_config root_node=-1 gap_count=1
Nov 16 14:23:13 crusher /kernel: start AT DMA status=11
Nov 16 14:23:14 crusher /kernel: bus_explore done
Nov 16 14:23:14 crusher /kernel: firewire0: BUS reset
Nov 16 14:23:14 crusher /kernel: firewire0: BUS reset
Nov 16 14:23:14 crusher /kernel: firewire0: node_id = 0x8800ffc0, non
CYCLEMASTER mode
Nov 16 14:23:14 crusher /kernel: firewire0: 2 nodes, maxhop <= 1, cable
IRM = 0 (me)
Nov 16 14:23:14 crusher /kernel: fw_set_bus_manager: 63->0 (loop=0)
Nov 16 14:23:14 crusher /kernel: send phy_config root_node=-1 gap_count=1
Nov 16 14:23:14 crusher /kernel: start AT DMA status=12
Nov 16 14:23:14 crusher /kernel: firewire0:Discover new S400 device
ID:0010b9ff001e8e34
Nov 16 14:23:14 crusher /kernel: bus_explore done
Nov 16 14:23:14 crusher /kernel:
Nov 16 14:23:14 crusher /kernel: sbp_post_explore: EUI:0010b9ff001e8e34
spec=0 key=0.
Nov 16 14:32:17 crusher su: jason to root on /dev/ttyp3
Nov 17 08:19:54 crusher su: jason to root on /dev/ttyp3
Nov 17 10:24:24 crusher /kernel: sbp_detach
Nov 17 10:24:24 crusher /kernel: firewire0: BUS reset
Nov 17 10:24:24 crusher last message repeated 14 times
Nov 17 10:24:24 crusher /kernel: firewire0: node_id = 0x8800ffc0, non
CYCLEMASTER mode
Nov 17 10:24:24 crusher /kernel: firewire0: 2 nodes, maxhop <= 1, cable
IRM = 0 (me)
Nov 17 10:24:24 crusher /kernel: fw_set_bus_manager: 63->0 (loop=0)
Nov 17 10:24:24 crusher /kernel: send phy_config root_node=-1 gap_count=1
Nov 17 10:24:24 crusher /kernel: start AT DMA status=12
Nov 17 10:24:24 crusher /kernel: sbp0: detached
Nov 17 10:24:25 crusher /kernel: bus_explore done
Nov 17 10:24:30 crusher /kernel: firewire0: detached
Nov 17 10:24:30 crusher /kernel: fwohci0: detached
Nov 17 10:25:32 crusher su: jason to root on /dev/ttyp4
Nov 17 10:27:46 crusher /kernel: fwohci0: <Texas Instruments TSB12LV26>
mem 0xfeaf8000-0x
feafbfff,0xfeaff800-0xfeafffff irq 3 at device 9.0 on pci2
Nov 17 10:27:46 crusher /kernel: fwohci0: PCI bus latency is 250.
Nov 17 10:27:46 crusher /kernel: cache size 4.
Nov 17 10:27:46 crusher /kernel: fwohci0: OHCI version 1.0 (ROM=1)
Nov 17 10:27:46 crusher /kernel: fwohci0: No. of Isochronous channel is 4.
Nov 17 10:27:46 crusher /kernel: fwohci0: resetting OHCI...done (0)
Nov 17 10:27:46 crusher /kernel: fwohci0: BUS_OPT 0xa002 -> 0xf800a002
Nov 17 10:27:46 crusher /kernel: fwohci0: Link 1394a available S400, 3
ports, maxrec 2048
 bytes.
Nov 17 10:27:46 crusher /kernel: fwohci0: Enable 1394a Enhancements
Nov 17 10:30:11 crusher /kernel: sbp_identify
Nov 17 12:44:16 crusher proftpd[14911]: localhost
(81.49.65.38[81.49.65.38]) - Format-Nic
kname 'write' is not defined.
Nov 17 12:44:16 crusher proftpd[14911]: localhost
(81.49.65.38[81.49.65.38]) - Format-Nic
kname 'auth' is not defined.
Nov 17 12:44:16 crusher proftpd[14911]: localhost
(81.49.65.38[81.49.65.38]) - no such us
er 'anonymous'
Nov 17 12:44:16 crusher last message repeated 4 times
Nov 17 12:44:16 crusher proftpd[14911]: localhost
(81.49.65.38[81.49.65.38]) - USER anony
mous: no such user found from 81.49.65.38 [81.49.65.38] to 192.168.1.99:21
Nov 18 09:49:50 crusher su: jason to root on /dev/ttyp3
Nov 18 09:53:46 crusher /kernel: linkerunload: attempt to unload file that
was loaded by the kernel


--
========================================
|  Jason Welsh   jason@monsterjam.org  |
|        http://monsterjam.org         |
========================================

The trouble with being poor is that it takes up all your time.




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-firewire" in the body of the message


From owner-freebsd-firewire  Tue Nov 19 10:15:24 2002
Delivered-To: freebsd-firewire@freebsd.org
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 2D2E337B401
	for <freebsd-firewire@freebsd.org>; Tue, 19 Nov 2002 10:15:21 -0800 (PST)
Received: from gaia.arc.nasa.gov (gaia.arc.nasa.gov [143.232.155.74])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 718FE43E3B
	for <freebsd-firewire@freebsd.org>; Tue, 19 Nov 2002 10:15:20 -0800 (PST)
	(envelope-from buzz@gaia.arc.nasa.gov)
Received: from mono.arc.nasa.gov (mono.arc.nasa.gov [143.232.155.67])
	by gaia.arc.nasa.gov (8.11.6/8.11.6) with ESMTP id gAJIFIZ01290
	for <freebsd-firewire@freebsd.org>; Tue, 19 Nov 2002 10:15:18 -0800 (PST)
Date: Tue, 19 Nov 2002 10:15:16 -0800 (PST)
From: Buzz Slye <buzz@gaia.arc.nasa.gov>
X-X-Sender: buzz@mono.arc.nasa.gov
To: freebsd-firewire@freebsd.org
Subject: Kodak on firewire
Message-ID: <Pine.GSO.4.44.0211191013040.1262-100000@mono.arc.nasa.gov>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-firewire@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-firewire.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-firewire>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-firewire>
X-Loop: FreeBSD.ORG

Hi,

I am going to try this one again.  This time it really is a Kodak camera,
not an Oxford disk.  (The result fails the same way.)  The Kodak is not
a SCSI device.  The Kodak camera is logged in and attached by SBP-II as
follows:

firewire0: node_id = 0x8800ffc0, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
firewire0:Discover new S400 device ID:00e0263d00006323
bus_explore done
Device Kodal Pro Back Plus
sbp_post_explore
sbp_post_explore: EUI:00e0263d00006323 spec=0 key=0.
sbp_alloc_target
sbp_probe_target 0
sbp0:0:0 sbp_mgm_orb
sbp0:0:0 LOGIN
sbp0:0:0 sbp_enqueue_ocb orb=0x42008 in physical memory
sbp0:0:0 ordered:0 type:16 EUI:00e0263d00006323 node:1 speed:2 maxrec:10 new!
sbp0:0:0 'Kodak' '(null)' '000000'
sbp0:0:0 sbp_login_callback
sbp resp: 0 len: 48 off: 0
sbp ffc00c10 ffc10001 00000000 00200000
sbp 41000000 00042008 00000000 00000000
sbp 00000000 00000000 00000000 00000000
received address 0x0
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:1 stat:0 orb:0 00042008
sbp0:0:0 No additional information to report
orb: 0x42008 next: 0x0, flags 0
sbp0:0:0 login: len 12, ID 0, cmd 0000fffff0020000, recon_hold 0
sbp0:0:0 sbp_busy_timeout
sbp0:0:0 sbp_but_timeout_callback
sbp0:0:0 sbp_agent_reset
sbp0:0:0 sbp_do_attach
sbp0:0:0 sbp_cam_scan_lun
sbp0:0:0 XPT_PATH_INQ:.
sbp0:0:0 XPT_PATH_INQ:.
sbp0:0:0 XPT_SCSI_IO: cmd: 12 00 00 00 24 00 00 00 10 00, flags: 0x40, 6b cmd/36b data/18b sense
ORB 80000000 00000000 ffc00000 0004215c
ORB 8a900000 12000000 24000000 00000000
sbp0:0:0 sbp_enqueue_ocb orb=0x4213c in physical memory
sbp0:0:0 sbp_orb_pointer
sbp0:0:0 sbp_cmd_callback
sbp resp: 0 len: 48 off: 0
sbp ffc01810 ffc10001 00000000 00200000
sbp 47000000 0004213c 0b50500d 80000000
sbp 00000000 00000000 00000000 00000000
received address 0x0
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:7 stat:0 orb:0 0004213c
sbp0:0:0 No additional information to report
orb: 0x4213c next: 0x0, flags 1
sbp0:0:0 XPT_SCSI_IO: cmd: 12 00 00 00 24 00 00 00 10 00, flags: 0x40, 6b cmd/36b data/18b sense
sbp0:0:0 SCSI status b sfmt 0 valid 0 key 0 code 50 qlfr d len 7
sbp_scsi_status: unknown scsi status
sbp0:0:0 sbp_fix_inq_data

   ..... the last 18 lines above are repeated several times .....

sbp0:0:0 sbp_cam_callback

I now would like to run a program which accesses the camera directly through
firewire.c by way of iotcl.  (This is what fw_tap.c does to run the ethernet
code.)  After opening "/dev/fw1" and allocating asyreq, I have the following:

	asyreq->req.type = FWASREQEUI;
	asyreq->req.sped = FWSPD_S400;
	asyreq->req.len = 120;
	asyreq->req.dst.eui.hi = DEVICE_EUI_HI;
	asyreq->req.dst.eui.lo = DEVICE_EUI_LO;

	asyreq->pkt.mode.common.tcode = FWTCODE_WREQB;
	asyreq->pkt.mode.wreqb.len = htons(24);
	asyreq->pkt.mode.wreqb.src = 0;			/* ??? */
	asyreq->pkt.mode.wreqb.dest_lo = htonl((int)resp);	/* ??? */
	asyreq->pkt.mode.wreqb.payload[0] = htonl(1 << 31);
	asyreq->pkt.mode.wreqb.payload[3] = 0;		/* ??? */
	asyreq->pkt.mode.wreqb.payload[4] = htonl(0x8a900000);
	asyreq->pkt.mode.wreqb.payload[5] = htonl(0x12000000);
	asyreq->pkt.mode.wreqb.payload[6] = htonl(0x24000000);

        ioctl(fd, FW_ASYREQ, asyreq);

Note that the inquiry command (the first byte of the command data block,
i.e., the 0x12 in payload[5]) is the same as already sent by SBP-II.
See the above XPT_SCSI_IO.  This results in:

fw_rcv: unknown response tcode=2 src=0xffc1 tl=34 rt=0 data=0x84511a82
try ad-hoc work around!!
no use...

The command orb has been sent, but the response fails.  A look at the
code for firewire.c shows that this message is generated because a call
to fw_tl2xfer indicates that the response destination does not agree
with the original source.  How can I get the response back to my program ?

Thanx,

        Robert Slye   MS 242-4
        NASA/Ames Research Center
        Moffett Field, CA 94035

        buzz@gaia.arc.nasa.gov





To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-firewire" in the body of the message


From owner-freebsd-firewire  Tue Nov 19 22: 5:21 2002
Delivered-To: freebsd-firewire@freebsd.org
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 12D0937B401
	for <freebsd-firewire@FreeBSD.ORG>; Tue, 19 Nov 2002 22:05:14 -0800 (PST)
Received: from ns.koganei.wide.ad.jp (koganei.wide.ad.jp [202.249.37.254])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 2882543E3B
	for <freebsd-firewire@FreeBSD.ORG>; Tue, 19 Nov 2002 22:05:13 -0800 (PST)
	(envelope-from ikob@koganei.wide.ad.jp)
Received: from koganei.wide.ad.jp (dhcp-204-42-69-170.ietf55.ops.ietf.org [204.42.69.170])
	(authenticated bits=0)
	by ns.koganei.wide.ad.jp (8.12.3/8.12.3) with ESMTP id gAK68jh6037213;
	Wed, 20 Nov 2002 15:08:46 +0900 (JST)
	(envelope-from ikob@koganei.wide.ad.jp)
X-Authentication-Warning: ns.koganei.wide.ad.jp: Host dhcp-204-42-69-170.ietf55.ops.ietf.org [204.42.69.170] claimed to be koganei.wide.ad.jp
Date: Wed, 20 Nov 2002 01:05:45 -0500
Subject: Re: Kodak on firewire
Content-Type: text/plain; charset=US-ASCII; format=flowed
Mime-Version: 1.0 (Apple Message framework v548)
Cc: freebsd-firewire@FreeBSD.ORG
To: Buzz Slye <buzz@gaia.arc.nasa.gov>
From: Katsushi Kobayashi <ikob@koganei.wide.ad.jp>
In-Reply-To: <Pine.GSO.4.44.0211191013040.1262-100000@mono.arc.nasa.gov>
Message-Id: <1B5B5C1B-FC4E-11D6-B36D-000393D603A4@koganei.wide.ad.jp>
Content-Transfer-Encoding: 7bit
X-Mailer: Apple Mail (2.548)
Sender: owner-freebsd-firewire@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-firewire.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-firewire>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-firewire>
X-Loop: FreeBSD.ORG

I cannot judge whether your code would work from the attached
information. I found the attached SBP-2 test code when I was
using earlier developing phase. I think this code is messy and
difficult to read. But, I hope it is your help.

On 2002.Nov.19, at 01:15  PM, Buzz Slye wrote:

> Hi,
>
> I am going to try this one again.  This time it really is a Kodak 
> camera,
> not an Oxford disk.  (The result fails the same way.)  The Kodak is not
> a SCSI device.  The Kodak camera is logged in and attached by SBP-II as
> follows:
>


#include <sys/param.h>
#include <sys/malloc.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <sys/errno.h>
#include <sys/types.h>
#include <sys/stat.h>

#include <dev/firewire/firewire.h>

#include <netinet/in.h>
#include <fcntl.h>
#include <stdio.h>
#include <strings.h>

#define SBPRES_HI	0x000f
#define SBPRES_LO	0x30000000

usage()
{
	printf("TBD..");
	exit();
}
main(argc, argv)
         int argc;
         char *argv[];
{
	extern char *optarg;
	extern int optind;
	int d;
	int i, j, len;
	unsigned long *qld;
	unsigned long *buf;
	char ch, node;
	char devname[] = "/dev/fw0";
	struct fw_asyreq *asyreq;
	struct fw_asybindreq bindreq;
	struct fw_pkt *fp;
	struct stat sb;

	while ((ch = getopt(argc, argv, "I:")) != -1){
		switch(ch) {
			case 'I':
				strcpy(devname, optarg);
		     		break;
			case '?':
			default:
				usage();
				break;
		}
	}
	argc -= optind;
	argv += optind;
	if( argc < 1 ) {
		usage();
	}else {
		node = strtoul(argv[0], (char **)NULL, 10);
	}
	asyreq = (struct fw_asyreq *)malloc(sizeof(struct fw_asyreq_t) + 512);
	buf = (unsigned long *)malloc(512);
	fp = (struct fw_pkt *)buf;

	d = open(devname, O_RDWR);

	if(fstat(d, &sb)< 0){
        		err(1, "stat");
	}
	bindreq.start.hi = SBPRES_HI;
	bindreq.start.lo = SBPRES_LO;
	bindreq.len= 2048;
#if 1
	printf("step 1\n");

	if( ioctl(d, FW_SBINDADDR, &bindreq) < 0) {
        		err(1, "ioctl");
	}
/**/
	asyreq->req.sped = 0;
	asyreq->req.type = FWASREQNODE;
	asyreq->pkt.mode.wreqb.dst = htons(0xffc0 | node);
	asyreq->pkt.mode.wreqb.tlrt = 0;
	asyreq->pkt.mode.wreqb.tcode = 1;
	asyreq->pkt.mode.wreqb.len = htons(8);
	asyreq->req.len = 512;
	asyreq->pkt.mode.wreqb.extcode = 0;

	asyreq->pkt.mode.wreqb.dest_hi = htons(0xffff);
/**/
	asyreq->pkt.mode.wreqb.dest_lo = htonl(0xf0030000);
/**/
	asyreq->pkt.mode.wreqb.dest_lo = htonl(0xf0010000);

	asyreq->pkt.mode.wreqb.payload[0] = htonl(SBPRES_HI);
	asyreq->pkt.mode.wreqb.payload[1] = htonl(SBPRES_LO);
/**/
/*
	asyreq->req.sped = 0;
	asyreq->req.type = FWASREQNODE;
	asyreq->pkt.mode.wreqq.dst = 0xffc0 | node;
	asyreq->pkt.mode.wreqq.tlrt = 0;
	asyreq->pkt.mode.wreqq.tcode = 0;
	asyreq->pkt.mode.wreqq.data = 0;
	asyreq->req.len = 512;

	asyreq->pkt.mode.wreqq.dest_hi = 0xffff;
	asyreq->pkt.mode.wreqq.dest_lo = 0xf0010008;

	qld = (unsigned long *)&asyreq->pkt;
	for(i = 0 ; i < 24 ; i+= 4){
		printf("%08x ", qld[i/4]);
	}
	printf("\n");

	printf("step 2\n");

	if( ioctl(d, FW_ASYREQ, asyreq) < 0) {
        			err(1, "ioctl");
	}
	for(i = 0 ; i < asyreq->req.len ; i+= 4){
		printf("%08x ", qld[i/4]);
	}
	printf("\n");

	asyreq->req.sped = 0;
	asyreq->req.type = FWASREQNODE;
	asyreq->pkt.mode.wreqq.dst = 0xffc0 | node;
	asyreq->pkt.mode.wreqq.tlrt = 0;
	asyreq->pkt.mode.wreqq.tcode = 0;
	asyreq->pkt.mode.wreqq.data = 0x30000000;
	asyreq->req.len = 512;

	asyreq->pkt.mode.wreqq.dest_hi = 0xffff;
	asyreq->pkt.mode.wreqq.dest_lo = 0xf001000c;
*/
	qld = (unsigned long *)&asyreq->pkt;
	for(i = 0 ; i < 24 ; i+= 4){
		printf("%08x ", ntohl(qld[i/4]));
	}
	printf("\n");

	printf("step 3\n");
	if( ioctl(d, FW_ASYREQ, asyreq) < 0) {
        			err(1, "ioctl");
	}
	for(i = 0 ; i < asyreq->req.len ; i+= 4){
		printf("%08x ", ntohl(qld[i/4]));
	}
	printf("\n");
	len = read(d, buf, 512);
	if(len < 0){
        		err(1, "ioctl");
	}
/*
	printf("len = %d\n", len);
	for(i = 0 ; i < len; i+= 4){
		printf("%08x ", buf[i/4]);
		if(((i - 1 )% 64) == 0){
			printf("\n");
		}
	}
	if((i % 64) != 0){
		printf("\n");
	}
*/
	printf("code %08x ", fp->mode.rreqb.tcode);
	printf("tlrt %08x ", fp->mode.rreqb.tlrt);
	printf("addr %08x:", ntohs(fp->mode.rreqb.dest_hi));
	printf("%08x ", ntohl(fp->mode.rreqb.dest_lo));
	printf("len %08x\n", ntohs(fp->mode.rreqb.len));

	asyreq->pkt.mode.rresb.dst = ntohs(0xffc0 | node);
	asyreq->pkt.mode.rresb.tlrt = fp->mode.rreqb.tlrt;
	asyreq->pkt.mode.rresb.tcode = 7;
	asyreq->pkt.mode.rresb.rtcode = 0;
	asyreq->pkt.mode.rresb.len = fp->mode.rreqb.len;
	asyreq->req.len = 512;
	asyreq->pkt.mode.rresb.extcode = 0;

	printf("len %08x\n", ntohs(fp->mode.rreqb.len));

	asyreq->pkt.mode.rresb.payload[0] = 0;
	asyreq->pkt.mode.rresb.payload[1] = 0;
	asyreq->pkt.mode.rresb.payload[2] = 0;
	asyreq->pkt.mode.rresb.payload[3] = ntohl(0x30000200);
	asyreq->pkt.mode.rresb.payload[4] = ntohl(0x90100000);
	asyreq->pkt.mode.rresb.payload[5] = ntohl(0x00000200);
	asyreq->pkt.mode.rresb.payload[6] = ntohl(0x00000000);
	asyreq->pkt.mode.rresb.payload[7] = ntohl(0x30000400);
/**/
	for(i = 0 ; i < 40 ; i+= 4){
		printf("%08x ", ntohl(qld[i/4]));
	}
	printf("\n");
/**/

	printf("step 4\n");
	if( ioctl(d, FW_ASYREQ, asyreq) < 0) {
        			err(1, "ioctl");
	}
	for(i = 0 ; i < asyreq->req.len ; i+= 4){
		printf("%08x ", qld[i/4]);
	}
	printf("\n");

	len = read(d, buf, 512);
	if(len < 0){
        		err(1, "ioctl");
	}
	printf("len = %d\n", len);
	for(i = 0 ; i < len; i+= 4){
		printf("%08x ", buf[i/4]);
		if(((i - 1 )% 64) == 0){
			printf("\n");
		}
	}
	if((i % 64) != 0){
		printf("\n");
	}
/**/
	printf("code %08x ", fp->mode.wreqb.tcode);
	printf("tlrt %08x ", fp->mode.wreqb.tlrt);
	printf("addr %08x:", fp->mode.wreqb.dest_hi);
	printf("%08x ", fp->mode.wreqb.dest_lo);
	printf("len %08x\n", fp->mode.wreqb.len);
	printf("%08x %08x %08x\n", fp->mode.wreqb.payload[0],
		fp->mode.wreqb.payload[1], fp->mode.wreqb.payload[2]);

	asyreq->pkt.mode.wres.dst = 0xffc0 | node;
	asyreq->pkt.mode.wres.tlrt = fp->mode.rreqb.tlrt;
	asyreq->pkt.mode.wres.tcode = 2;
	asyreq->pkt.mode.wres.rtcode = 0;
	asyreq->req.len = 512;
	printf("step 5\n");
	if( ioctl(d, FW_ASYREQ, asyreq) < 0) {
        			err(1, "ioctl");
	}


	len = read(d, buf, 512);
	if(len < 0){
        		err(1, "ioctl");
	}
/*
	printf("len = %d\n", len);
	for(i = 0 ; i < len; i+= 4){
		printf("%08x ", buf[i/4]);
		if(((i - 1 )% 64) == 0){
			printf("\n");
		}
	}
	if((i % 64) != 0){
		printf("\n");
	}
*/
/**/
	printf("code %08x ", fp->mode.wreqb.tcode);
	printf("tlrt %08x ", fp->mode.wreqb.tlrt);
	printf("addr %08x:", fp->mode.wreqb.dest_hi);
	printf("%08x ", fp->mode.wreqb.dest_lo);
	printf("len %08x\n", fp->mode.wreqb.len);
	printf("%08x %08x %08x\n", fp->mode.wreqb.payload[0],
		fp->mode.wreqb.payload[1], fp->mode.wreqb.payload[2]);

	asyreq->pkt.mode.wres.dst = 0xffc0 | node;
	asyreq->pkt.mode.wres.tlrt = fp->mode.rreqb.tlrt;
	asyreq->pkt.mode.wres.tcode = 2;
	asyreq->pkt.mode.wres.rtcode = 0;
	asyreq->req.len = 512;
	printf("step 6\n");
	if( ioctl(d, FW_ASYREQ, asyreq) < 0) {
        			err(1, "ioctl");
	}
/**/
#endif
#if 0
	fp->mode.wres.dst = 0xffc0 | node;
	fp->mode.wres.rtcode = 0;
	fp->mode.wreqb.tcode = 2;
	for(i = 0 ; i < 12 ; i+= 4){
		printf("%08x ", buf[i/4]);
		if(((i - 1 )% 64) == 0){
			printf("\n");
		}
	}
	if((i % 64) != 0){
		printf("\n");
	}
	len = write(d, buf, 12);
	if(len < 0){
        		err(1, "write");
	}
#endif
}


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-firewire" in the body of the message


From owner-freebsd-firewire  Wed Nov 20  7:36:33 2002
Delivered-To: freebsd-firewire@freebsd.org
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 80DBD37B401
	for <firewire@freebsd.org>; Wed, 20 Nov 2002 07:36:32 -0800 (PST)
Received: from is1.mh.itc.u-tokyo.ac.jp (is1.mh.itc.u-tokyo.ac.jp [133.11.205.11])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 3B63743E8A
	for <firewire@freebsd.org>; Wed, 20 Nov 2002 07:36:31 -0800 (PST)
	(envelope-from simokawa@sat.t.u-tokyo.ac.jp)
Received: from is1.mh.itc.u-tokyo.ac.jp (is1.mh.itc.u-tokyo.ac.jp [127.0.0.1])
	by is1.mh.itc.u-tokyo.ac.jp (Postfix) with ESMTP id 7FFEC2180DC
	for <firewire@freebsd.org>; Thu, 21 Nov 2002 00:36:20 +0900 (JST)
Received: from mailhosting.itc.u-tokyo.ac.jp (IDENT:mirapoint@mailhosting.itc.u-tokyo.ac.jp [133.11.205.3])
	by is1.mh.itc.u-tokyo.ac.jp (8.11.3/8.11.3) with ESMTP id gAKFaKQ02864;
	Thu, 21 Nov 2002 00:36:20 +0900
Received: from ett.sat.t.u-tokyo.ac.jp (ett.sat.t.u-tokyo.ac.jp [133.11.135.3])
	by mailhosting.itc.u-tokyo.ac.jp (Mirapoint Messaging Server MOS 2.9.3.2)
	with ESMTP id AHJ57106;
	Thu, 21 Nov 2002 00:36:19 +0900 (JST)
Date: Thu, 21 Nov 2002 00:36:19 +0900
Message-ID: <ybsadk4b6do.wl@ett.sat.t.u-tokyo.ac.jp>
From: Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
To: jason <jason@monsterjam.org>
Cc: firewire@freebsd.org
Subject: Re: module wont unload?
In-Reply-To: <20021119124214.P30327-100000@monsterjam.org>
References: <20021119124214.P30327-100000@monsterjam.org>
User-Agent: Wanderlust/2.11.0 (Wonderwall) REMI/1.14.3 (Matsudai)
 FLIM/1.14.3 (=?ISO-8859-1?Q?Unebigory=F2mae?=) APEL/10.3 MULE XEmacs/21.4
 (patch 8) (Honest Recruiter) (i386--freebsd)
X-Face: OE([KxWyJI0r[R~S/>7ia}SJ)i%a,$-9%7{*yihQk|]gl}2p#"oXmX/fT}Bn7:
 #j7i14gu$jgR\S*&C3R/pJX<mI-4Z8'mqt1R'CjWdw-xqVoilv`\JgZcquM5oV
 uO^<vt/~051rCDM(`{rM~?{Okr,XC+}Ycm9IJO)odT*-0nyJjBJYzL{GsZ
MIME-Version: 1.0 (generated by REMI 1.14.3 - "Matsudai")
Content-Type: text/plain; charset=US-ASCII
Sender: owner-freebsd-firewire@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-firewire.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-firewire>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-firewire>
X-Loop: FreeBSD.ORG

At Tue, 19 Nov 2002 12:50:11 -0500 (EST),
jason wrote:
> any ideas? how can I find the /dev/xxxx name? the old one was /dev/sda1.
> but that didnt seem to work. Sorry, dont have the messages. do I have to
> reboot to get that kernel module unloaded?
> 
> Jason

'camcontrol devlist' is your friend.

At Tue, 19 Nov 2002 12:50:11 -0500 (EST),
jason wrote:
> Nov 17 10:27:46 crusher /kernel: fwohci0: OHCI version 1.0 (ROM=1)
> Nov 17 10:27:46 crusher /kernel: fwohci0: No. of Isochronous channel is 4.
> Nov 17 10:27:46 crusher /kernel: fwohci0: resetting OHCI...done (0)
> Nov 17 10:27:46 crusher /kernel: fwohci0: BUS_OPT 0xa002 -> 0xf800a002
> Nov 17 10:27:46 crusher /kernel: fwohci0: Link 1394a available S400, 3
> ports, maxrec 2048
>  bytes.
> Nov 17 10:27:46 crusher /kernel: fwohci0: Enable 1394a Enhancements
> Nov 17 10:30:11 crusher /kernel: sbp_identify
> Nov 17 12:44:16 crusher proftpd[14911]: localhost
> (81.49.65.38[81.49.65.38]) - Format-Nic
> kname 'write' is not defined.

If there is no message after sbp_identify, sbp seems not to be loaded
successfully. I recommand you to reboot the system.

/\ Hidetoshi Shimokawa
\/  simokawa@sat.t.u-tokyo.ac.jp
PGP public key: http://www.sat.t.u-tokyo.ac.jp/~simokawa/pgp.html


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-firewire" in the body of the message


From owner-freebsd-firewire  Wed Nov 20  9:46:48 2002
Delivered-To: freebsd-firewire@freebsd.org
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id A29C637B401
	for <firewire@freebsd.org>; Wed, 20 Nov 2002 09:46:46 -0800 (PST)
Received: from smtpout.mac.com (A17-250-248-86.apple.com [17.250.248.86])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 492DA43E6E
	for <firewire@freebsd.org>; Wed, 20 Nov 2002 09:46:46 -0800 (PST)
	(envelope-from jordbaer@mac.com)
Received: from asmtp01.mac.com (asmtp01-qfe3 [10.13.10.65])
	by smtpout.mac.com (Xserve/MantshX 2.0) with ESMTP id gAKHl33v027957
	for <firewire@freebsd.org>; Wed, 20 Nov 2002 09:47:03 -0800 (PST)
Received: from mac.com ([62.153.136.133]) by asmtp01.mac.com
          (Netscape Messaging Server 4.15) with ESMTP id H5VYPW00.6CY;
          Wed, 20 Nov 2002 09:46:44 -0800 
Date: Wed, 20 Nov 2002 18:46:42 +0100
Subject: Re: CD/DVD via firewire
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Mime-Version: 1.0 (Apple Message framework v548)
Cc: firewire@freebsd.org
To: Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
From: =?ISO-8859-1?Q?Bodo_R=FCskamp?= <jordbaer@mac.com>
In-Reply-To: <ybs8yzob5zx.wl@ett.sat.t.u-tokyo.ac.jp>
Message-Id: <078E1AF4-FCB0-11D6-B42B-0030657EC4AA@mac.com>
Content-Transfer-Encoding: quoted-printable
X-Mailer: Apple Mail (2.548)
Sender: owner-freebsd-firewire@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-firewire.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-firewire>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-firewire>
X-Loop: FreeBSD.ORG


On Mittwoch, November 20, 2002, at 04:44  Uhr, Hidetoshi Shimokawa=20
wrote:
> I suspect bad hardware (cable, etc.) because of duplicated BUS reset
> here.

The cable is okay. The cable connects a hard disk to my G4 Cube without=20=

any problem.
The interface card is a Adaptec Duo Connect.
My iPod connects without problems using that cable to the Adaptec card.

My mail was not a bug report. Just a notice to the developers that=20
something
is not running. I know that the firewire support in 4-STABLE is new.

; Bodo

--=20
Bodo R=FCskamp <jordbaer@mac.com>


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-firewire" in the body of the message


From owner-freebsd-firewire  Wed Nov 20  9:47:20 2002
Delivered-To: freebsd-firewire@freebsd.org
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id B522B37B401
	for <firewire@freebsd.org>; Wed, 20 Nov 2002 09:47:18 -0800 (PST)
Received: from is1.mh.itc.u-tokyo.ac.jp (is1.mh.itc.u-tokyo.ac.jp [133.11.205.11])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 5F39E43E75
	for <firewire@freebsd.org>; Wed, 20 Nov 2002 09:47:17 -0800 (PST)
	(envelope-from simokawa@sat.t.u-tokyo.ac.jp)
Received: from is1.mh.itc.u-tokyo.ac.jp (is1.mh.itc.u-tokyo.ac.jp [127.0.0.1])
	by is1.mh.itc.u-tokyo.ac.jp (Postfix) with ESMTP id 7F5B32180F0
	for <firewire@freebsd.org>; Thu, 21 Nov 2002 00:44:35 +0900 (JST)
Received: from mailhosting.itc.u-tokyo.ac.jp (IDENT:mirapoint@mailhosting.itc.u-tokyo.ac.jp [133.11.205.3])
	by is1.mh.itc.u-tokyo.ac.jp (8.11.3/8.11.3) with ESMTP id gAKFiZQ03185;
	Thu, 21 Nov 2002 00:44:35 +0900
Received: from ett.sat.t.u-tokyo.ac.jp (ett.sat.t.u-tokyo.ac.jp [133.11.135.3])
	by mailhosting.itc.u-tokyo.ac.jp (Mirapoint Messaging Server MOS 2.9.3.2)
	with ESMTP id AHJ57173;
	Thu, 21 Nov 2002 00:44:34 +0900 (JST)
Date: Thu, 21 Nov 2002 00:44:34 +0900
Message-ID: <ybs8yzob5zx.wl@ett.sat.t.u-tokyo.ac.jp>
From: Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
To: Bodo =?ISO-8859-1?Q?R=FCskamp?= <jordbaer@mac.com>
Cc: firewire@freebsd.org
Subject: Re: CD/DVD via firewire
In-Reply-To: <DD9992DC-FBE5-11D6-8B7A-0030657EC4AA@mac.com>
References: <DD9992DC-FBE5-11D6-8B7A-0030657EC4AA@mac.com>
User-Agent: Wanderlust/2.11.0 (Wonderwall) REMI/1.14.3 (Matsudai)
 FLIM/1.14.3 (=?ISO-8859-1?Q?Unebigory=F2mae?=) APEL/10.3 MULE XEmacs/21.4
 (patch 8) (Honest Recruiter) (i386--freebsd)
X-Face: OE([KxWyJI0r[R~S/>7ia}SJ)i%a,$-9%7{*yihQk|]gl}2p#"oXmX/fT}Bn7:
 #j7i14gu$jgR\S*&C3R/pJX<mI-4Z8'mqt1R'CjWdw-xqVoilv`\JgZcquM5oV
 uO^<vt/~051rCDM(`{rM~?{Okr,XC+}Ycm9IJO)odT*-0nyJjBJYzL{GsZ
MIME-Version: 1.0 (generated by REMI 1.14.3 - "Matsudai")
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Sender: owner-freebsd-firewire@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-firewire.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-firewire>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-firewire>
X-Loop: FreeBSD.ORG

At Tue, 19 Nov 2002 18:39:33 +0100,
Bodo R=FCskamp wrote:
> =

> [1  <text/plain; US-ASCII (7bit)>]
> Hi,
> =

> After checking the firewire connection to my iPod, I immediately took
> my other firewire stuff from my G4 Cube and attached it to the
> FreeBSD machine. CDs and DVDs aren't working.
> =

> Attached is the dmesg output from that devices.
=2E..

> Mounting root from ufs:/dev/ad0s3a
> firewire0: BUS reset
> firewire0: node_id =3D 0xc800ffc1, CYCLEMASTER mode
> firewire0: 2 nodes, maxhop <=3D 1, cable IRM =3D 1 (me)
> fw_set_bus_manager: 63->1 (loop=3D0)
> send phy_config root_node=3D-1 gap_count=3D1
> start AT DMA status=3D11
> firewire0: BUS reset
> firewire0: txd err=3D 0 No stat
> fw_xfer_done: pending
> firewire0: node_id =3D 0xc800ffc1, CYCLEMASTER mode
> firewire0: 2 nodes, maxhop <=3D 1, cable IRM =3D 1 (me)
> fw_set_bus_manager: 1-X1 (loop=3D0)
> send phy_config root_node=3D-1 gap_count=3D1

I suspect bad hardware (cable, etc.) because of duplicated BUS reset
here.

/\ Hidetoshi Shimokawa
\/  simokawa@sat.t.u-tokyo.ac.jp
PGP public key: http://www.sat.t.u-tokyo.ac.jp/~simokawa/pgp.html

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-firewire" in the body of the message


From owner-freebsd-firewire  Wed Nov 20 10:20:49 2002
Delivered-To: freebsd-firewire@freebsd.org
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id C60C137B401
	for <firewire@freebsd.org>; Wed, 20 Nov 2002 10:20:47 -0800 (PST)
Received: from monsterjam.org (rdu74-164-138.nc.rr.com [24.74.164.138])
	by mx1.FreeBSD.org (Postfix) with SMTP id D857343E88
	for <firewire@freebsd.org>; Wed, 20 Nov 2002 10:20:46 -0800 (PST)
	(envelope-from jason@monsterjam.org)
Received: (qmail 34687 invoked from network); 20 Nov 2002 18:20:46 -0000
Received: from unknown (HELO monsterjam.org) (10.1.1.3)
  by 0 with SMTP; 20 Nov 2002 18:20:46 -0000
Date: Wed, 20 Nov 2002 13:20:46 -0500 (EST)
From: jason <jason@monsterjam.org>
To: Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
Cc: firewire@freebsd.org
Subject: Re: module wont unload?
In-Reply-To: <ybsadk4b6do.wl@ett.sat.t.u-tokyo.ac.jp>
Message-ID: <20021120132018.L34412-100000@monsterjam.org>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-firewire@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-firewire.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-firewire>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-firewire>
X-Loop: FreeBSD.ORG

su-2.05a# camcontrol devlist
su-2.05a# kldunload firewire
kldunload: can't unload file: Device busy
su-2.05a#


Jason

--
========================================
|  Jason Welsh   jason@monsterjam.org  |
|        http://monsterjam.org         |
========================================

Nudists are people who wear one-button suits.

On Thu, 21 Nov 2002, Hidetoshi Shimokawa wrote:

> At Tue, 19 Nov 2002 12:50:11 -0500 (EST),
> jason wrote:
> > any ideas? how can I find the /dev/xxxx name? the old one was /dev/sda1.
> > but that didnt seem to work. Sorry, dont have the messages. do I have to
> > reboot to get that kernel module unloaded?
> >
> > Jason
>
> 'camcontrol devlist' is your friend.
>
> At Tue, 19 Nov 2002 12:50:11 -0500 (EST),
> jason wrote:
> > Nov 17 10:27:46 crusher /kernel: fwohci0: OHCI version 1.0 (ROM=1)
> > Nov 17 10:27:46 crusher /kernel: fwohci0: No. of Isochronous channel is 4.
> > Nov 17 10:27:46 crusher /kernel: fwohci0: resetting OHCI...done (0)
> > Nov 17 10:27:46 crusher /kernel: fwohci0: BUS_OPT 0xa002 -> 0xf800a002
> > Nov 17 10:27:46 crusher /kernel: fwohci0: Link 1394a available S400, 3
> > ports, maxrec 2048
> >  bytes.
> > Nov 17 10:27:46 crusher /kernel: fwohci0: Enable 1394a Enhancements
> > Nov 17 10:30:11 crusher /kernel: sbp_identify
> > Nov 17 12:44:16 crusher proftpd[14911]: localhost
> > (81.49.65.38[81.49.65.38]) - Format-Nic
> > kname 'write' is not defined.
>
> If there is no message after sbp_identify, sbp seems not to be loaded
> successfully. I recommand you to reboot the system.
>
> /\ Hidetoshi Shimokawa
> \/  simokawa@sat.t.u-tokyo.ac.jp
> PGP public key: http://www.sat.t.u-tokyo.ac.jp/~simokawa/pgp.html
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-firewire" in the body of the message
>


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-firewire" in the body of the message