From owner-freebsd-scsi@FreeBSD.ORG Mon Nov 29 11:02:07 2004 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 453FF16A4F9 for ; Mon, 29 Nov 2004 11:02:07 +0000 (GMT) Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id 141E343D1D for ; Mon, 29 Nov 2004 11:02:07 +0000 (GMT) (envelope-from owner-bugmaster@freebsd.org) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.13.1/8.13.1) with ESMTP id iATB26QF008113 for ; Mon, 29 Nov 2004 11:02:06 GMT (envelope-from owner-bugmaster@freebsd.org) Received: (from peter@localhost) by freefall.freebsd.org (8.13.1/8.13.1/Submit) id iATB26FA008107 for freebsd-scsi@freebsd.org; Mon, 29 Nov 2004 11:02:06 GMT (envelope-from owner-bugmaster@freebsd.org) Date: Mon, 29 Nov 2004 11:02:06 GMT Message-Id: <200411291102.iATB26FA008107@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: peter set sender to owner-bugmaster@freebsd.org using -f From: FreeBSD bugmaster To: freebsd-scsi@FreeBSD.org Subject: Current problem reports assigned to you X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 Nov 2004 11:02:07 -0000 Current FreeBSD problem reports Critical problems Serious problems S Submitted Tracker Resp. Description ------------------------------------------------------------------------------- f [2000/08/18] kern/20689 scsi Newbusified version of ncr driver does no f [2001/05/03] kern/27059 scsi (symbios) SCSI subsystem hangs under heav o [2001/06/29] kern/28508 scsi problems with backup to Tandberg SLR40 st o [2002/06/17] kern/39388 scsi ncr/sym drivers fail with 53c810 and more o [2002/07/22] kern/40895 scsi wierd kernel / device driver bug f [2002/09/15] kern/42796 scsi NCR/SYM 53C825 driver detects scsi cdrom f [2002/11/25] kern/45713 scsi If you use the amr driver, it is impossib f [2002/12/09] kern/46152 scsi Panic in adw dumping to tape f [2003/05/16] kern/52331 scsi 4.7 to 4.8-REL upgrade: SCSI disks on sym f [2003/09/14] kern/56759 scsi [hang] System freezes when writing CD Adv f [2003/09/14] kern/56760 scsi [hang] system hangs at boot with adaptec f [2003/09/14] kern/56871 scsi dd can't write variable length data block f [2003/09/18] kern/56973 scsi SCSI errors from on-board Adaptec (AIC7xx s [2003/09/30] kern/57398 scsi Current fails to install on mly(4) based o [2003/12/26] kern/60598 scsi wire down of scsi devices conflicts with a [2004/01/10] kern/61165 scsi [panic] kernel page fault after calling c o [2004/09/15] kern/71778 scsi 5.3 BETA3 doesnt see Adaptec 2015S FW Rev 17 problems total. Non-critical problems S Submitted Tracker Resp. Description ------------------------------------------------------------------------------- o [2000/12/06] kern/23314 scsi aic driver fails to detect Adaptec 1520B o [2001/08/15] kern/29727 scsi [amr] [patch] amr_enquiry3 structure in a o [2002/02/23] kern/35234 scsi World access to /dev/pass? (for scanner) o [2002/06/02] kern/38828 scsi [feature request] DPT PM2012B/90 doesn't o [2002/10/29] kern/44587 scsi dev/dpt/dpt.h is missing defines required o [2003/10/01] kern/57468 scsi [patch] Quirk for Quantum LPS540S o [2003/10/01] kern/57469 scsi [patch] Quirk for Conner CP3500 o [2004/09/22] kern/72010 scsi [patch] mt -f /dev/rsa0.ctl comp off, or 8 problems total. From owner-freebsd-scsi@FreeBSD.ORG Tue Nov 30 19:27:09 2004 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 26CF016A4CE for ; Tue, 30 Nov 2004 19:27:09 +0000 (GMT) Received: from protactinio.k8.com.br (protactinio.k8.com.br [200.185.109.50]) by mx1.FreeBSD.org (Postfix) with ESMTP id CEDEE43D1F for ; Tue, 30 Nov 2004 19:27:08 +0000 (GMT) (envelope-from alexandre@abdv.net) Received: from localhost (localhost [127.0.0.1]) by smtpa.k8.com.br (Postfix) with ESMTP id 04AE650004D8 for ; Tue, 30 Nov 2004 17:26:59 -0200 (BRST) Received: from smtpa.k8.com.br ([127.0.0.1]) by localhost (protactinio.k8.com.br [127.0.0.1]) (amavisd-new, port 10024) with LMTP id 18887-01-11 for ; Tue, 30 Nov 2004 17:26:59 -0200 (BRST) Received: from [10.0.1.29] (unknown [200.193.194.2]) by smtpa.k8.com.br (Postfix) with ESMTP id E474C5000829 for ; Tue, 30 Nov 2004 15:14:50 -0200 (BRST) Message-ID: <41ACAA88.5050307@abdv.net> Date: Tue, 30 Nov 2004 15:14:48 -0200 From: Alexandre Vasconcelos User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.7.2) Gecko/20041008 X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-scsi@freebsd.org Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Subject: ServRAID 5i and DLT X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 Nov 2004 19:27:09 -0000 Hello All, I've searched for this on google and list archives without success.. I have on IBM xSeries 235, ServRAID 5i adapter, 3 disks on channel 0 and a Benchmark DLT tape on channel 1. The adapter bios shows one logical drive and one "other" (probably the tape). I've installed FreeBSD 5.3, the GENERIC kernel can see this adapter (ips), dmesg | grep ips shows: [root@barracuda kernel]# dmesg | grep ips ips0: mem 0xf4000000-0xf7ffffff irq 22 at device 3.0 on pci5 ips0: [GIANT-LOCKED] ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ips0: adapter type: ServeRAID 5i II (sarasota) ips0: logical drives: 1 ips0: Logical Drive 0: RAID5 sectors: 286744576, state OK ipsd0: on ips0 ipsd0: Logical Drive (140012MB) Mounting root from ufs:/dev/ipsd0s1a But it don't recognize any tapes, there's no "nsa?" output on dmesg, but a bios utility from ibm (pc doctor) shows Benchmark on the second channel. I've made some tests with Red Hat AS3 and it shows Benchmark while booting.. IBM identifies this unit as 40/80 GB HH DLTVS Internal Tape Drive. The adapter utility don't show any special configuration.. I have another server with one HP DLT unit that is recognized as BENCHMARK on FreeBSD 4.10, so I don't think this is a tape type problem.. does FreeBSD support this tape on this adapter? I don't want to run Linux on this server :( Thanks in advance, Alexandre Vasconcelos From owner-freebsd-scsi@FreeBSD.ORG Tue Nov 30 19:31:31 2004 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8E8B516A4CE for ; Tue, 30 Nov 2004 19:31:31 +0000 (GMT) Received: from pooker.samsco.org (pooker.samsco.org [168.103.85.57]) by mx1.FreeBSD.org (Postfix) with ESMTP id 29AAB43D48 for ; Tue, 30 Nov 2004 19:31:31 +0000 (GMT) (envelope-from scottl@freebsd.org) Received: from [192.168.254.11] (junior-wifi.samsco.home [192.168.254.11]) (authenticated bits=0) by pooker.samsco.org (8.12.11/8.12.10) with ESMTP id iAUJZ0mR008638; Tue, 30 Nov 2004 12:35:01 -0700 (MST) (envelope-from scottl@freebsd.org) Message-ID: <41ACCAAA.4070900@freebsd.org> Date: Tue, 30 Nov 2004 12:31:54 -0700 From: Scott Long User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.7.2) Gecko/20040929 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Alexandre Vasconcelos References: <41ACAA88.5050307@abdv.net> In-Reply-To: <41ACAA88.5050307@abdv.net> X-Enigmail-Version: 0.86.1.0 X-Enigmail-Supports: pgp-inline, pgp-mime Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Status: No, hits=0.0 required=3.8 tests=none autolearn=no version=2.63 X-Spam-Checker-Version: SpamAssassin 2.63 (2004-01-11) on pooker.samsco.org cc: freebsd-scsi@freebsd.org Subject: Re: ServRAID 5i and DLT X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 Nov 2004 19:31:31 -0000 Alexandre Vasconcelos wrote: > Hello All, > > I've searched for this on google and list archives without success.. > I have on IBM xSeries 235, ServRAID 5i adapter, 3 disks on channel 0 and > a Benchmark DLT tape on channel 1. The adapter bios shows one logical > drive and one "other" (probably the tape). I've installed FreeBSD 5.3, > the GENERIC kernel can see this adapter (ips), dmesg | grep ips shows: > > [root@barracuda kernel]# dmesg | grep ips > ips0: mem 0xf4000000-0xf7ffffff irq 22 at device > 3.0 on pci5 > ips0: [GIANT-LOCKED] > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ips0: adapter type: ServeRAID 5i II (sarasota) > ips0: logical drives: 1 > ips0: Logical Drive 0: RAID5 sectors: 286744576, state OK > ipsd0: on ips0 > ipsd0: Logical Drive (140012MB) > Mounting root from ufs:/dev/ipsd0s1a > > But it don't recognize any tapes, there's no "nsa?" output on dmesg, but > a bios utility from ibm (pc doctor) shows Benchmark on the second > channel. I've made some tests with Red Hat AS3 and it shows Benchmark > while booting.. IBM identifies this unit as 40/80 GB HH DLTVS Internal > Tape Drive. > > The adapter utility don't show any special configuration.. I have > another server with one HP DLT unit that is recognized as BENCHMARK on > FreeBSD 4.10, so I don't think this is a tape type problem.. does > FreeBSD support this tape on this adapter? I don't want to run Linux on > this server :( > > Thanks in advance, > Alexandre Vasconcelos The ips driver has no mechanism for exporting SCSI devices like tape drives. It's probably possible to examine something like the linux driver and figure out how to make it work, but it likely requires something in the range of 400-600 lines of code. Scott From owner-freebsd-scsi@FreeBSD.ORG Tue Nov 30 19:36:49 2004 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3785B16A515 for ; Tue, 30 Nov 2004 19:36:49 +0000 (GMT) Received: from smtp.vodafone.nl (pip09.vizzavi.nl [62.72.223.29]) by mx1.FreeBSD.org (Postfix) with ESMTP id 372E143D8B for ; Tue, 30 Nov 2004 19:36:48 +0000 (GMT) (envelope-from j.molinger@chello.nl) Received: from [127.0.0.1] (g106006.upc-g.chello.nl [80.57.106.6]) by svrmss04-front.vizzavi.nl (iPlanet Messaging Server 5.2 HotFix 1.21 (built Sep 8 2003)) with ESMTPA id <0I8000MVOBT7BF@svrmss04-front.vizzavi.nl> for freebsd-scsi@freebsd.org; Tue, 30 Nov 2004 20:36:44 +0100 (MET) Date: Tue, 30 Nov 2004 11:36:41 -0800 From: Jeroen Molinger In-reply-to: <41ACAA88.5050307@abdv.net> To: Alexandre Vasconcelos , freebsd-scsi@freebsd.org Message-id: <41ACCBC9.2000507@chello.nl> MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7BIT X-Accept-Language: en-us, en User-Agent: Mozilla Thunderbird 0.8 (Windows/20040913) References: <41ACAA88.5050307@abdv.net> Subject: Re: ServRAID 5i and DLT X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 Nov 2004 19:36:49 -0000 Nope, it is not going to work. Just add a other U320 controller card for the tape. I alaways use the 6M card with the internal controller for the tape gr Jeroen Molinger Alexandre Vasconcelos wrote: > Hello All, > > I've searched for this on google and list archives without success.. > I have on IBM xSeries 235, ServRAID 5i adapter, 3 disks on channel 0 > and a Benchmark DLT tape on channel 1. The adapter bios shows one > logical drive and one "other" (probably the tape). I've installed > FreeBSD 5.3, the GENERIC kernel can see this adapter (ips), dmesg | > grep ips shows: > > [root@barracuda kernel]# dmesg | grep ips > ips0: mem 0xf4000000-0xf7ffffff irq 22 at > device 3.0 on pci5 > ips0: [GIANT-LOCKED] > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ips0: adapter type: ServeRAID 5i II (sarasota) > ips0: logical drives: 1 > ips0: Logical Drive 0: RAID5 sectors: 286744576, state OK > ipsd0: on ips0 > ipsd0: Logical Drive (140012MB) > Mounting root from ufs:/dev/ipsd0s1a > > But it don't recognize any tapes, there's no "nsa?" output on dmesg, > but a bios utility from ibm (pc doctor) shows Benchmark on the second > channel. I've made some tests with Red Hat AS3 and it shows Benchmark > while booting.. IBM identifies this unit as 40/80 GB HH DLTVS Internal > Tape Drive. > > The adapter utility don't show any special configuration.. I have > another server with one HP DLT unit that is recognized as BENCHMARK on > FreeBSD 4.10, so I don't think this is a tape type problem.. does > FreeBSD support this tape on this adapter? I don't want to run Linux > on this server :( > > Thanks in advance, > Alexandre Vasconcelos > _______________________________________________ > freebsd-scsi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org" > > From owner-freebsd-scsi@FreeBSD.ORG Tue Nov 30 19:58:26 2004 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 71D9B16A4CE; Tue, 30 Nov 2004 19:58:26 +0000 (GMT) Received: from protactinio.k8.com.br (protactinio.k8.com.br [200.185.109.50]) by mx1.FreeBSD.org (Postfix) with ESMTP id 29D2543D5C; Tue, 30 Nov 2004 19:58:26 +0000 (GMT) (envelope-from alexandre@abdv.net) Received: from localhost (localhost [127.0.0.1]) by smtpa.k8.com.br (Postfix) with ESMTP id D22DA50003D8; Tue, 30 Nov 2004 17:58:20 -0200 (BRST) Received: from smtpa.k8.com.br ([127.0.0.1]) by localhost (protactinio.k8.com.br [127.0.0.1]) (amavisd-new, port 10024) with LMTP id 20615-01-95; Tue, 30 Nov 2004 17:58:20 -0200 (BRST) Received: from [10.0.1.29] (unknown [200.193.194.2]) by smtpa.k8.com.br (Postfix) with ESMTP id 6A60E50004A9; Tue, 30 Nov 2004 17:58:20 -0200 (BRST) Message-ID: <41ACD0DF.4050001@abdv.net> Date: Tue, 30 Nov 2004 17:58:23 -0200 From: Alexandre Vasconcelos User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.7.2) Gecko/20041008 X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-scsi@freebsd.org References: <41ACAA88.5050307@abdv.net> <41ACCAAA.4070900@freebsd.org> In-Reply-To: <41ACCAAA.4070900@freebsd.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit cc: Scott Long Subject: Re: ServRAID 5i and DLT X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 Nov 2004 19:58:26 -0000 Scott Long wrote: > The ips driver has no mechanism for exporting SCSI devices like tape > drives. It's probably possible to examine something like the linux > driver and figure out how to make it work, but it likely requires > something in the range of 400-600 lines of code. Hi Scott, Thanks for responding. Despite my little experience programming in C some day I would like to contribute with this code to the community.. but I need to make this tape works as soon as possible to replace another server with a hard crashed tape, for this reason I'm running without backups. Witch adapter would you recommend to work with this DLT tape on FreeBSD 5.3? Thanks again, Alexandre From owner-freebsd-scsi@FreeBSD.ORG Tue Nov 30 20:00:42 2004 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8C7CF16A4CF for ; Tue, 30 Nov 2004 20:00:42 +0000 (GMT) Received: from pooker.samsco.org (pooker.samsco.org [168.103.85.57]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3098643D45 for ; Tue, 30 Nov 2004 20:00:42 +0000 (GMT) (envelope-from scottl@freebsd.org) Received: from [192.168.254.11] (junior-wifi.samsco.home [192.168.254.11]) (authenticated bits=0) by pooker.samsco.org (8.12.11/8.12.10) with ESMTP id iAUK4CiR008839; Tue, 30 Nov 2004 13:04:13 -0700 (MST) (envelope-from scottl@freebsd.org) Message-ID: <41ACD182.1020408@freebsd.org> Date: Tue, 30 Nov 2004 13:01:06 -0700 From: Scott Long User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.7.2) Gecko/20040929 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Alexandre Vasconcelos References: <41ACAA88.5050307@abdv.net> <41ACCAAA.4070900@freebsd.org> <41ACD0DF.4050001@abdv.net> In-Reply-To: <41ACD0DF.4050001@abdv.net> X-Enigmail-Version: 0.86.1.0 X-Enigmail-Supports: pgp-inline, pgp-mime Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Status: No, hits=0.0 required=3.8 tests=none autolearn=no version=2.63 X-Spam-Checker-Version: SpamAssassin 2.63 (2004-01-11) on pooker.samsco.org cc: freebsd-scsi@freebsd.org Subject: Re: ServRAID 5i and DLT X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 Nov 2004 20:00:42 -0000 Alexandre Vasconcelos wrote: > Scott Long wrote: > > The ips driver has no mechanism for exporting SCSI devices like tape > >> drives. It's probably possible to examine something like the linux >> driver and figure out how to make it work, but it likely requires >> something in the range of 400-600 lines of code. > > > Hi Scott, > > Thanks for responding. > Despite my little experience programming in C some day I would like to > contribute with this code to the community.. but I need to make this > tape works as soon as possible to replace another server with a hard > crashed tape, for this reason I'm running without backups. Witch adapter > would you recommend to work with this DLT tape on FreeBSD 5.3? > > Thanks again, > Alexandre Any normal SCSI controller will work. You can pick up fairly cheap LSI and Adaptec controllers at major retailers and of course eBay. Scott From owner-freebsd-scsi@FreeBSD.ORG Wed Dec 1 18:43:32 2004 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2861D16A4CE for ; Wed, 1 Dec 2004 18:43:32 +0000 (GMT) Received: from serv1.olympus.ru (serv1.olympus.ru [217.76.183.35]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6367043D58 for ; Wed, 1 Dec 2004 18:43:31 +0000 (GMT) (envelope-from daem0n@0f.ru) Received: by serv1.olympus.ru (Postfix, from userid 1008) id 6F5F827F30; Wed, 1 Dec 2004 23:43:30 +0500 (YEKT) Received: from [217.76.176.76] (unknown [217.76.176.76]) by serv1.olympus.ru (Postfix) with ESMTP id 30CB6268AC for ; Wed, 1 Dec 2004 23:43:30 +0500 (YEKT) Message-ID: <41AE109E.4050207@0f.ru> Date: Wed, 01 Dec 2004 23:42:38 +0500 From: =?KOI8-R?Q?=E9=CC=D8=D1_=E1=CE=CF=C8=C9=CE?= User-Agent: Mozilla Thunderbird 0.9 (Windows/20041103) X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-scsi@freebsd.org Content-Type: text/plain; charset=KOI8-R; format=flowed Content-Transfer-Encoding: 7bit Subject: A dmesg warning X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 01 Dec 2004 18:43:32 -0000 Hi fellows. I've recently installed FreeBSD-5.3-RELEASE at my 3.0 GHz Intel Pentium Server with Adaptec SCSI controllers and a couple of Seagate U-SCSI320 hard disks. After re-compiling the kernel with support of ipfw and smp, dmesg shows the following warnings. ---- begin of dmesg output ---- Waiting 15 seconds for SCSI devices to settle ahd0: Invalid Sequencer interrupt occurred. >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< ahd0: Dumping Card State at program address 0x235 Mode 0x0 Card was paused INTSTAT[0x0] SELOID[0x1] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x6]:(INTMASK1|INTMASK2) SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x2] KERNEL_QFREEZE_COUNT[0x2] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0xf NEXTSCB 0xff40 qinstart = 31 qinfifonext = 31 QINFIFO: WAITING_TID_QUEUES: Pending list: Total 0 Kernel Free SCB list: 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: ahd0: FIFO0 Free, LONGJMP == 0x8000, SCB 0x1 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0xf SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x8 0x0 0x0 0x1 0x0 0x4 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42 ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1 ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) ahd0: REG0 == 0xc160, SINDEX = 0x180, DINDEX = 0x104 ahd0: SCBPTR == 0x1, SCB_NEXT == 0xff40, SCB_NEXT2 == 0xff29 CDB 12 80 0 80 88 b1 STACK: 0x230 0x1 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0 Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0 SMP: AP CPU #1 Launched! da0 at ahd0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) da1 at ahd0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-3 device da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) ---- end of dmesg output ---- As u can see both of HDD's are launched successfully, and I didn't notice any malfunction in system. What is it? May it cause a system failure (software or hardware)? Is it possible to get rid of it? -- ---- Yours truly, daem0n From owner-freebsd-scsi@FreeBSD.ORG Wed Dec 1 20:45:34 2004 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2B03C16A4CE for ; Wed, 1 Dec 2004 20:45:34 +0000 (GMT) Received: from wproxy.gmail.com (wproxy.gmail.com [64.233.184.205]) by mx1.FreeBSD.org (Postfix) with ESMTP id D2D2743D41 for ; Wed, 1 Dec 2004 20:45:33 +0000 (GMT) (envelope-from ronald.bootsman@gmail.com) Received: by wproxy.gmail.com with SMTP id 70so24439wra for ; Wed, 01 Dec 2004 12:45:32 -0800 (PST) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:mime-version:content-type:content-transfer-encoding; b=PDSz7nN0DtutjbhZHilAixx7HjDvHxUzmgchOXRzLXfZL5mmK4SrPlENgkXosAa23Z/KHtQGf00IBkHmMv3xNaolCCi6zGI0yFpgxMzTBkPb2KGaWg9yBI6f/cYP6NyfPzvtZuyXEsXO28HDe5DZ+volYrVApevBa6Own4SD1Gs= Received: by 10.54.41.71 with SMTP id o71mr878783wro; Wed, 01 Dec 2004 12:45:32 -0800 (PST) Received: by 10.54.32.60 with HTTP; Wed, 1 Dec 2004 12:45:32 -0800 (PST) Message-ID: <1de95630041201124576d41946@mail.gmail.com> Date: Wed, 1 Dec 2004 21:45:32 +0100 From: -=b00tsie=- To: freebsd-scsi@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: FreeBSD 4.10 and Adaptec 2940U/UW X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: -=b00tsie=- List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 01 Dec 2004 20:45:34 -0000 I have a running FreeBSD 4.10 stable system, no problems at all. Now I am trying to add a tapestreamer to the system connected to a Adaptec 2940U/UW. I have recompiled the kernel, with the proper driver ahc uncommented. After rebooting with the new kernel, the system hangs completely. The last driver loaded is the ppc0, parallel port driver. It does see my ide drives, but does not mount any drives at all. It just stops before identifing my ide drives ad0 and ad2. In my kernel I have set to boot from ad0s1a and also in the /boot/loader.conf When I remove the adaptec card all works fine... Can someone help me or give directions where I can find a solution ?? Regards, Ronald Bootsman From owner-freebsd-scsi@FreeBSD.ORG Wed Dec 1 22:45:53 2004 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4E7C516A4CE for ; Wed, 1 Dec 2004 22:45:53 +0000 (GMT) Received: from mail.dt.e-technik.uni-dortmund.de (mail.dt.E-Technik.Uni-Dortmund.DE [129.217.163.1]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6150C43D49 for ; Wed, 1 Dec 2004 22:45:52 +0000 (GMT) (envelope-from ma@dt.e-technik.uni-dortmund.de) Received: from localhost (localhost [127.0.0.1])A705C4A852; Wed, 1 Dec 2004 23:45:51 +0100 (CET) Received: from mail.dt.e-technik.uni-dortmund.de ([127.0.0.1]) by localhost (krusty [127.0.0.1]) (amavisd-new, port 10024) with LMTP id 08526-03; Wed, 1 Dec 2004 23:45:51 +0100 (CET) Received: from m2a2.dyndns.org (p508EF65B.dip.t-dialin.net [80.142.246.91]) D98514A84F; Wed, 1 Dec 2004 23:45:47 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by merlin.emma.line.org (Postfix) with ESMTP id 6E7B9DFEA5; Wed, 1 Dec 2004 23:45:46 +0100 (CET) Received: from merlin.emma.line.org ([127.0.0.1]) by localhost (m2a2.dyndns.org [127.0.0.1]) (amavisd-new, port 10024) with LMTP id 16120-02-3; Wed, 1 Dec 2004 23:45:44 +0100 (CET) Received: by merlin.emma.line.org (Postfix, from userid 500) id A1CF2DFEA2; Wed, 1 Dec 2004 23:45:44 +0100 (CET) To: -=b00tsie=- In-Reply-To: <1de95630041201124576d41946@mail.gmail.com> (ronald.bootsman@gmail.com's message of "Wed, 1 Dec 2004 21:45:32 +0100") References: <1de95630041201124576d41946@mail.gmail.com> From: Matthias Andree Date: Wed, 01 Dec 2004 23:45:44 +0100 Message-ID: User-Agent: Gnus/5.110003 (No Gnus v0.3) Emacs/21.3 (gnu/linux) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Virus-Scanned: by amavisd-new at dt.e-technik.uni-dortmund.de cc: freebsd-scsi@freebsd.org Subject: Re: FreeBSD 4.10 and Adaptec 2940U/UW X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 01 Dec 2004 22:45:53 -0000 -=b00tsie=- writes: > I have a running FreeBSD 4.10 stable system, no problems at all. > > Now I am trying to add a tapestreamer to the system connected to a > Adaptec 2940U/UW. Is that an OnStream tape device or something else? > I have recompiled the kernel, with the proper driver ahc uncommented. > > After rebooting with the new kernel, the system hangs completely. Hardware problem? PCI resource conflict, IRQ for instance? Does resetting the adapter in its own BIOS to factory settings help? Is the drive attached when you have a problem? Does the Adaptec work in a different PCI slot? Perhaps in a different machine? Can you lend a different adaptor, such as a Tekram DC-390F or U2W (Symbios 53C8XX based, so different driver needed) and try that? > The last driver loaded is the ppc0, parallel port driver. At that time, there should have been a few log lines for ahc0, please show that - and please show a dmesg of your working system (without the Adaptec installed). Do you see a message similar to this: Nov 30 02:40:10 libertas /kernel: Waiting 5 seconds for SCSI devices to settle On my machine the ahc0 lines (of a 2940 UW Pro) are: Nov 30 02:40:10 libertas /kernel: ahc0: port 0xe800-0xe8ff mem 0xe3020000-0xe3020fff irq 15 at device 8.0 on pci0 Nov 30 02:40:10 libertas /kernel: aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs -- Matthias Andree From owner-freebsd-scsi@FreeBSD.ORG Thu Dec 2 07:41:59 2004 Return-Path: Delivered-To: freebsd-scsi@hub.freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3510916A4CE; Thu, 2 Dec 2004 07:41:59 +0000 (GMT) Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0E05043D3F; Thu, 2 Dec 2004 07:41:59 +0000 (GMT) (envelope-from linimon@FreeBSD.org) Received: from freefall.freebsd.org (linimon@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.1/8.13.1) with ESMTP id iB27fwco026652; Thu, 2 Dec 2004 07:41:58 GMT (envelope-from linimon@freefall.freebsd.org) Received: (from linimon@localhost) by freefall.freebsd.org (8.13.1/8.13.1/Submit) id iB27fwQ7026648; Thu, 2 Dec 2004 07:41:58 GMT (envelope-from linimon) Date: Thu, 2 Dec 2004 07:41:58 GMT From: Mark Linimon Message-Id: <200412020741.iB27fwQ7026648@freefall.freebsd.org> To: linimon@FreeBSD.org, freebsd-bugs@FreeBSD.org, freebsd-scsi@FreeBSD.org Subject: Re: kern/74607: FreeBSD 5.3 install CD crashes on SCSI device probe X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 02 Dec 2004 07:41:59 -0000 Synopsis: FreeBSD 5.3 install CD crashes on SCSI device probe Responsible-Changed-From-To: freebsd-bugs->freebsd-scsi Responsible-Changed-By: linimon Responsible-Changed-When: Thu Dec 2 07:41:48 GMT 2004 Responsible-Changed-Why: Reassign to appropriate mailing list. http://www.freebsd.org/cgi/query-pr.cgi?pr=74607 From owner-freebsd-scsi@FreeBSD.ORG Thu Dec 2 08:01:12 2004 Return-Path: Delivered-To: freebsd-scsi@hub.freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 81F6716A56C for ; Thu, 2 Dec 2004 08:01:12 +0000 (GMT) Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id C5F2E43D49 for ; Thu, 2 Dec 2004 08:00:39 +0000 (GMT) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (gnats@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.1/8.13.1) with ESMTP id iB280d5R027611 for ; Thu, 2 Dec 2004 08:00:39 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.13.1/8.13.1/Submit) id iB280dl4027610; Thu, 2 Dec 2004 08:00:39 GMT (envelope-from gnats) Date: Thu, 2 Dec 2004 08:00:39 GMT Message-Id: <200412020800.iB280dl4027610@freefall.freebsd.org> To: freebsd-scsi@FreeBSD.org From: Scott Long Subject: Re: kern/74607: FreeBSD 5.3 install CD crashes on SCSI device probe X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: Scott Long List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 02 Dec 2004 08:01:12 -0000 The following reply was made to PR kern/74607; it has been noted by GNATS. From: Scott Long To: freebsd-gnats-submit@freebsd.org, wynkoop@wynn.com Cc: Subject: Re: kern/74607: FreeBSD 5.3 install CD crashes on SCSI device probe Date: Thu, 02 Dec 2004 00:52:36 -0700 Try booting the following: Start the install CD. At the boot loader, hit option '6' to escape to the boot prompt. Enter the following: set vm.old_contigmalloc=1 boot If that works, you'll want to try updating to the latest RELENG_5 sources. Scott From owner-freebsd-scsi@FreeBSD.ORG Thu Dec 2 09:01:08 2004 Return-Path: Delivered-To: freebsd-scsi@hub.freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 348AF16A526 for ; Thu, 2 Dec 2004 09:01:08 +0000 (GMT) Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9C7AD43D7D for ; Thu, 2 Dec 2004 09:00:59 +0000 (GMT) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (gnats@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.1/8.13.1) with ESMTP id iB290xfb034536 for ; Thu, 2 Dec 2004 09:00:59 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.13.1/8.13.1/Submit) id iB290xm3034535; Thu, 2 Dec 2004 09:00:59 GMT (envelope-from gnats) Date: Thu, 2 Dec 2004 09:00:59 GMT Message-Id: <200412020900.iB290xm3034535@freefall.freebsd.org> To: freebsd-scsi@FreeBSD.org From: Brett Wynkoop Subject: Re: kern/74607: FreeBSD 5.3 install CD crashes on SCSI device probe X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: Brett Wynkoop List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 02 Dec 2004 09:01:08 -0000 The following reply was made to PR kern/74607; it has been noted by GNATS. From: Brett Wynkoop To: Scott Long Cc: freebsd-gnats-submit@freebsd.org Subject: Re: kern/74607: FreeBSD 5.3 install CD crashes on SCSI device probe Date: Thu, 2 Dec 2004 03:53:09 -0500 On Thu, 02 Dec 2004 00:52:36 -0700 Scott Long wrote: > Try booting the following: > > Start the install CD. At the boot loader, hit option '6' to escape to > the boot prompt. Enter the following: > > set vm.old_contigmalloc=1 > boot > > If that works, you'll want to try updating to the latest RELENG_5 > sources. > > Scott > Well that seems to have done the trick. I guess this is related to something already found based on the quick idea for the fix. I do not currently have a running 5.x system. I was going to make a spare laptop my first system, but it seems that 5.x dislikes the PCMCIA ports on all 6 laptops I tried! So.......Any upgrade to RELENG_5, or even 5.3 on the desktop will be on hold. Thanks. When I do get to RELENG_5 I will let you know how it works. -Brett From owner-freebsd-scsi@FreeBSD.ORG Thu Dec 2 19:34:37 2004 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CC76816A4CE for ; Thu, 2 Dec 2004 19:34:37 +0000 (GMT) Received: from wproxy.gmail.com (wproxy.gmail.com [64.233.184.198]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6997943D3F for ; Thu, 2 Dec 2004 19:34:35 +0000 (GMT) (envelope-from ronald.bootsman@gmail.com) Received: by wproxy.gmail.com with SMTP id 71so418205wri for ; Thu, 02 Dec 2004 11:34:27 -0800 (PST) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:references; b=NZzLX1110DdDgLfzFLhRsTdl25t5IOASnfVEGYK3u4IrFYSRF+bAVuxhtWN3PZNCmkGGZqACtAaBUgbjbnpXOWfbUTXVnAkRSJFYm/Jcw0nuGQTS5NwkQE/hlZUm63lIVEExv3O1lYQkW/xnRJsIJ0KFhxRO2zmX9yEZU+YzfNo= Received: by 10.54.33.66 with SMTP id g66mr225299wrg; Thu, 02 Dec 2004 11:34:26 -0800 (PST) Received: by 10.54.32.60 with HTTP; Thu, 2 Dec 2004 11:34:26 -0800 (PST) Message-ID: <1de95630041202113464534096@mail.gmail.com> Date: Thu, 2 Dec 2004 20:34:26 +0100 From: -=b00tsie=- To: Matthias Andree In-Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit References: <1de95630041201124576d41946@mail.gmail.com> cc: freebsd-scsi@freebsd.org Subject: Re: FreeBSD 4.10 and Adaptec 2940U/UW X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: -=b00tsie=- List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 02 Dec 2004 19:34:37 -0000 Tnx Matthias, changing the card to a different pci slot did the job! That I don't think about it myself :-( On Wed, 01 Dec 2004 23:45:44 +0100, Matthias Andree wrote: > -=b00tsie=- writes: > > > I have a running FreeBSD 4.10 stable system, no problems at all. > > > > Now I am trying to add a tapestreamer to the system connected to a > > Adaptec 2940U/UW. > > Is that an OnStream tape device or something else? > > > I have recompiled the kernel, with the proper driver ahc uncommented. > > > > After rebooting with the new kernel, the system hangs completely. > > Hardware problem? PCI resource conflict, IRQ for instance? > Does resetting the adapter in its own BIOS to factory settings help? > Is the drive attached when you have a problem? > Does the Adaptec work in a different PCI slot? Perhaps in a different > machine? Can you lend a different adaptor, such as a Tekram DC-390F or > U2W (Symbios 53C8XX based, so different driver needed) and try that? > > > The last driver loaded is the ppc0, parallel port driver. > > At that time, there should have been a few log lines for ahc0, please > show that - and please show a dmesg of your working system (without the > Adaptec installed). Do you see a message similar to this: > > Nov 30 02:40:10 libertas /kernel: Waiting 5 seconds for SCSI devices to settle > > On my machine the ahc0 lines (of a 2940 UW Pro) are: > > Nov 30 02:40:10 libertas /kernel: ahc0: port 0xe800-0xe8ff mem 0xe3020000-0xe3020fff irq 15 at device 8.0 on pci0 > Nov 30 02:40:10 libertas /kernel: aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs > > -- > Matthias Andree > -- groeten, -= b00tsie =-