From owner-freebsd-acpi@FreeBSD.ORG Sun Apr 9 05:38:00 2006 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7939B16A402 for ; Sun, 9 Apr 2006 05:38:00 +0000 (UTC) (envelope-from daeg@houston.rr.com) Received: from ms-smtp-04.texas.rr.com (ms-smtp-04.texas.rr.com [24.93.47.43]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1145043D46 for ; Sun, 9 Apr 2006 05:37:59 +0000 (GMT) (envelope-from daeg@houston.rr.com) Received: from cpe-24-167-65-111.houston.res.rr.com (cpe-24-167-65-111.houston.res.rr.com [24.167.65.111]) by ms-smtp-04.texas.rr.com (8.13.4/8.13.4) with ESMTP id k395bvwL012138 for ; Sun, 9 Apr 2006 00:37:58 -0500 (CDT) From: David J Brooks Organization: KC5WNK To: freebsd-acpi@freebsd.org Date: Sat, 8 Apr 2006 23:37:42 -0600 User-Agent: KMail/1.9.1 X-Face: "\j?x](l|]4p?-1Bf@!wN<&p=$.}^k-HgL}cJKbQZ3r#Ar]\%U(#6}'?<3s7%(%(gxJxxc R nSNPNr*/^~StawWU9KDJ-CT0k$f#@t2^K&BS_f|?ZV/.7Q MIME-Version: 1.0 Content-Disposition: inline Message-Id: <200604090037.42786.daeg@houston.rr.com> Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Virus-Scanned: Symantec AntiVirus Scan Engine Subject: Thermal problems with HP Pavillion 510c X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Apr 2006 05:38:00 -0000 Description of Buggy Behavior: ACPI Thermal reports absurdly low temperatures and is ignored at start-up. As a consequence, the CPU fan runs loudly and continuously. When booted under Win XP the thermal system operates as expected, and much more quietly. dmesg output (ACPI enabled): Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-PRERELEASE #16: Mon Mar 27 08:22:11 CST 2006 david@fuzzy.home.net:/usr/obj/usr/src/sys/FUZZY Preloaded elf kernel "/boot/kernel/kernel" at 0xc0794000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07941b0. Calibrating clock(s) ... i8254 clock: 1193084 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1295686277 Hz CPU: Intel(R) Celeron(TM) CPU 1300MHz (1295.69-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383fbff real memory = 401080320 (382 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000825000 - 0x0000000017605fff, 383651840 bytes (93665 pages) 0x0000000017d00000 - 0x0000000017e77fff, 1540096 bytes (376 pages) avail memory = 387153920 (369 MB) MP Configuration Table version 1.4 found at 0xc009fd70 Table 'FACP' at 0x17cfbf0a Table 'APIC' at 0x17cfbf7e MADT: Found table at 0x17cfbf7e APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled ACPI APIC Table: bios32: Found BIOS32 Service Directory header at 0xc00f6640 bios32: Entry = 0xfd7b0 (c00fd7b0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd7b0+0x1f8 pnpbios: Found PnP BIOS data at 0xc00f66a0 pnpbios: Entry = f0000:915d Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: high lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040011 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000 random: mem: Pentium Pro MTRR support enabled io: VESA: information block 56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00 00 01 10 00 38 24 2e 01 00 01 40 01 00 01 63 01 00 01 1c 01 09 01 0a 01 0b 01 0c 01 1d 01 0e 01 00 01 27 01 28 01 01 01 10 01 11 01 12 01 02 01 VESA: 20 mode(s) found VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc06b5b02 (1000022) VESA: Intel(R) 810, Intel(R) 815 Chipset Video BIOS VESA: Intel Corporation Intel(R) 810, Intel(R) 815 Chipset Hardware Version 0.0 null: ioapic0: routing intpin 13 (ISA IRQ 13) to vector 48 npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 49 acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71248086) pcibios: BIOS version 2.10 Found $PIR table, 8 entries at 0xc00fdf40 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 1 1 14 A 0x60 3 4 5 7 9 10 11 12 14 15 slot 1 1 14 B 0x61 3 4 5 7 9 10 11 12 14 15 slot 1 1 14 C 0x62 3 4 5 7 9 10 11 12 14 15 slot 1 1 14 D 0x63 3 4 5 7 9 10 11 12 14 15 slot 2 1 13 A 0x61 3 4 5 7 9 10 11 12 14 15 slot 2 1 13 B 0x62 3 4 5 7 9 10 11 12 14 15 slot 2 1 13 C 0x63 3 4 5 7 9 10 11 12 14 15 slot 2 1 13 D 0x60 3 4 5 7 9 10 11 12 14 15 slot 3 1 11 A 0x62 3 4 5 7 9 10 11 12 14 15 slot 3 1 11 B 0x63 3 4 5 7 9 10 11 12 14 15 slot 3 1 11 C 0x60 3 4 5 7 9 10 11 12 14 15 slot 3 1 11 D 0x61 3 4 5 7 9 10 11 12 14 15 embedded 1 6 A 0x63 3 4 5 7 9 10 11 12 14 15 embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 7 9 10 11 12 14 15 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 7 9 10 11 12 14 15 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 9 10 11 12 14 15 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 9 N 0 3 4 5 7 9 10 11 12 14 15 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 9 N 0 3 4 5 7 9 10 11 12 14 15 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 9 10 11 12 14 15 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 9 N 0 3 4 5 7 9 10 11 12 14 15 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 9 N 0 3 4 5 7 9 10 11 12 14 15 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 9 10 11 12 14 15 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 7 9 10 11 12 14 15 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 7 9 10 11 12 14 15 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 9 10 11 12 14 15 ACPI timer: 1/1 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: on acpi0 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0x1010 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x7124, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7125, revid=0x03 bus=0, slot=1, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 1 supports D0 D3 current D0 map[10]: type 3, range 32, base f8000000, size 26, enabled map[14]: type 1, range 32, base f4000000, size 19, enabled pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2418, revid=0x02 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2410, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2411, revid=0x02 bus=0, slot=31, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 000010a0, size 4, enabled found-> vendor=0x8086, dev=0x2412, revid=0x02 bus=0, slot=31, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type 4, range 32, base 00001080, size 5, enabled pcib0: matched entry for 0.31.INTD pcib0: slot 31 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2413, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 map[20]: type 4, range 32, base 00001100, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2415, revid=0x02 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 map[10]: type 4, range 32, base 00001200, size 8, enabled map[14]: type 4, range 32, base 00001300, size 6, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 agp0: mem 0xf8000000-0xfbffffff,0xf4000000-0xf407ffff irq 16 at device 1.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000 agp0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xf4000000 pcib1: at device 30.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x2000-0x2fff pcib1: memory decode 0xf4100000-0xf42fffff pcib1: prefetched decode 0xf4300000-0xf43fffff pcib1: Subtractively decoded bridge. pci1: on pcib1 pci1: physical bus=1 found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=1, slot=6, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0103, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00002000, size 8, enabled pcib1: (null) requested I/O range 0x2000-0x20ff: in range map[14]: type 1, range 32, base f4200000, size 8, enabled pcib1: (null) requested memory range 0xf4200000-0xf42000ff: good pcib1: matched entry for 1.6.INTA pcib1: slot 6 INTA hardwired to IRQ 19 found-> vendor=0x11c1, dev=0x044e, revid=0x02 bus=1, slot=11, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0303, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0xfc (63000 ns), maxlat=0x0e (3500 ns) intpin=a, irq=9 powerspec 2 supports D0 D2 D3 current D0 map[10]: type 1, range 32, base f4200400, size 8, enabled pcib1: (null) requested memory range 0xf4200400-0xf42004ff: good map[14]: type 4, range 32, base 00002820, size 3, enabled pcib1: (null) requested I/O range 0x2820-0x2827: in range map[18]: type 4, range 32, base 00002400, size 8, enabled pcib1: (null) requested I/O range 0x2400-0x24ff: in range pcib1: matched entry for 1.11.INTA pcib1: slot 11 INTA hardwired to IRQ 18 found-> vendor=0x8086, dev=0x1229, revid=0x05 bus=1, slot=13, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0113, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=9 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base f4300000, size 12, enabled pcib1: (null) requested memory range 0xf4300000-0xf4300fff: good map[14]: type 4, range 32, base 00002800, size 5, enabled pcib1: (null) requested I/O range 0x2800-0x281f: in range map[18]: type 1, range 32, base f4100000, size 20, enabled pcib1: (null) requested memory range 0xf4100000-0xf41fffff: good pcib1: matched entry for 1.13.INTA pcib1: slot 13 INTA hardwired to IRQ 17 rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x2000 pcib1: rl0 requested I/O range 0x2000-0x20ff: in range rl0: port 0x2000-0x20ff mem 0xf4200000-0xf42000ff irq 19 at device 6.0 on pci1 pcib1: rl0 requested I/O range 0x2000-0x20ff: in range miibus0: on rl0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached rl0: Ethernet address: 00:40:2b:1c:2a:64 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 50 rl0: [MPSAFE] pci1: at device 11.0 (no driver attached) fxp0: port 0x2800-0x281f mem 0xf4300000-0xf4300fff,0xf4100000-0xf41fffff irq 17 at device 13.0 on pci1 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf4300000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 8086 000a 0005 fxp0: Dynamic Standby mode is disabled miibus1: on fxp0 inphy0: on miibus1 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:90:27:0e:4a:9c ioapic0: routing intpin 17 (PCI IRQ 17) to vector 51 fxp0: [MPSAFE] isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x10a0-0x10af at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x10a0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=50 devices=0x3 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 52 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=51 ostat1=50 ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=10 stat1=10 devices=0xc ioapic0: routing intpin 15 (ISA IRQ 15) to vector 53 ata1: [MPSAFE] uhci0: port 0x1080-0x109f irq 19 at device 31.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1080 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: at device 31.3 (no driver attached) pcm0: port 0x1200-0x12ff,0x1300-0x133f irq 17 at device 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1200 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0x1300 pcm0: [MPSAFE] pcm0: pcm0: Codec features headphone, 6 bit master volume, Analog Devices Phat Stereo pcm0: Primary codec extended features variable rate PCM, reserved 1 pcm0: ac97 codec dac ready count: 0 pcm0: sndbuf_setmap 1732d000, 4000; 0xd5062000 -> 1732d000 pcm0: sndbuf_setmap 17329000, 4000; 0xd5066000 -> 17329000 acpi_button0: on acpi0 acpi_tz0: on acpi0 acpi_tz0: _CRT value is absurd, ignored (-263.-7C) acpi_tz0: _PSV value is absurd, ignored (-273.-2C) acpi_tz0: _ACx value is absurd, ignored (-266.-7C) atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 54 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 55 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 sio0: irq maps: 0xcc01 0xcc11 0xcc01 0xcc01 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56 sio1: irq maps: 0xcc01 0xcc09 0xcc01 0xcc01 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ioapic0: routing intpin 3 (ISA IRQ 3) to vector 57 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ioapic0: routing intpin 7 (ISA IRQ 7) to vector 58 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 ioapic0: routing intpin 6 (ISA IRQ 6) to vector 59 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xc7fff,0xd0000-0xd07ff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices uhub1: vendor 0x109f product 0x7148, class 9/0, rev 1.10/0.00, addr 2 uhub1: 4 ports with 4 removable, self powered uscanner0: Color FlatbedScanner 13, rev 1.00/1.21, addr 3 ulpt0: hp deskjet 3600, rev 2.00/1.00, addr 4, iclass 7/1 ulpt0: using bi-directional mode Device configuration finished. lapic: Divisor 2, Frequency 49834021 hz Timecounter "TSC" frequency 1295686277 Hz quality 800 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging unlimited lo0: bpf attached ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on ICH chip ad0: 38166MB at ata0-master PIO4 ad0: 78165360 sectors [82714C/15H/63S] 16 sectors/interrupt 1 depth queue ad1: setting PIO4 on ICH chip ad1: 152627MB at ata0-slave PIO4 ad1: 312581808 sectors [330774C/15H/63S] 16 sectors/interrupt 1 depth queue ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire ata1-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire acd0: setting PIO4 on ICH chip GEOM: new disk ad0 GEOM: new disk ad1 acd0: CDROM drive at ata1 as master acd0: read 8937KB/s (8937KB/s), 128KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc acd1: setting PIO4 on ICH chip acd1: DMA limited to UDMA33, controller found non-ATA66 cable acd1: setting UDMA33 on ICH chip acd1: DVDR drive at ata1 as slave acd1: read 8269KB/s (8251KB/s) write 2756KB/s (2751KB/s), 2048KB buffer, UDMA33 acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd1: Writes: CDR, CDRW, DVDR, test write, burnproof acd1: Audio: play, 256 volume levels acd1: Mechanism: ejectable tray, unlocked acd1: Medium: CD-R 120mm audio disc pcm0: measured ac97 link rate at 48003 Hz, will use 48000 Hz pass0 at ata1 bus 0 target 1 lun 0 pass0: Removable CD-ROM SCSI-0 device pass0: 33.000MB/s transfers pass1 at ata1 bus 0 target 0 lun 0 pass1: Removable CD-ROM SCSI-0 device pass1: 16.000MB/s transfers cd0 at ata1 bus 0 target 1 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: cd present [328926 x 2048 byte records] cd1 at ata1 bus 0 target 0 lun 0 cd1: Removable CD-ROM SCSI-0 device cd1: 16.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present GEOM: new disk cd0 GEOM: new disk cd1 Trying to mount root from ufs:/dev/ad1s1a start_init: trying /sbin/init procfs registered ad1: setting PIO4 on ICH chip ad1: setting UDMA66 on ICH chip netsmb_dev: loaded splash: image decoder found: fire_saver Linux ELF exec handler installed dmesg output (ACPI disabled): The system will not boot without ACPI. Output from sysctl hw.acpi: hw.acpi.supported_sleep_state: S1 S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S1 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 hw.acpi.verbose: 1 hw.acpi.reset_video: 1 hw.acpi.cpu.cx_supported: C1/0 hw.acpi.cpu.cx_lowest: C1 hw.acpi.cpu.cx_usage: 100.00% hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.tz0.temperature: -268.0C hw.acpi.thermal.tz0.active: -1 hw.acpi.thermal.tz0.passive_cooling: 0 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: -1 hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: -1 hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 URL where my ASL can be found: http://www.quinnfamily.org/david-HPPavillion510c.asl Any help will be sincerely appreciated, David -- Sure God created the world in only six days, but He didn't have an established user-base.