From owner-freebsd-acpi@FreeBSD.ORG Sun Mar 18 01:58:58 2007 Return-Path: X-Original-To: acpi@FreeBSD.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id D00D116A400; Sun, 18 Mar 2007 01:58:58 +0000 (UTC) (envelope-from alex.kovalenko@verizon.net) Received: from vms040pub.verizon.net (vms040pub.verizon.net [206.46.252.40]) by mx1.freebsd.org (Postfix) with ESMTP id B49C013C44B; Sun, 18 Mar 2007 01:58:58 +0000 (UTC) (envelope-from alex.kovalenko@verizon.net) Received: from [10.0.3.231] ([141.150.95.47]) by vms040.mailsrvcs.net (Sun Java System Messaging Server 6.2-6.01 (built Apr 3 2006)) with ESMTPA id <0JF20072FTHR7GQ3@vms040.mailsrvcs.net>; Sat, 17 Mar 2007 20:58:40 -0500 (CDT) Date: Sat, 17 Mar 2007 21:58:34 -0400 From: "Alexandre \"Sunny\" Kovalenko" In-reply-to: <200703161256.23996.jkim@FreeBSD.org> To: Jung-uk Kim Message-id: <1174183114.1027.2.camel@RabbitsDen> MIME-version: 1.0 X-Mailer: Evolution 2.8.3 FreeBSD GNOME Team Port Content-type: text/plain Content-transfer-encoding: 7bit References: <200703161256.23996.jkim@FreeBSD.org> Cc: acpi@FreeBSD.org, current@FreeBSD.org Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 18 Mar 2007 01:58:58 -0000 On Fri, 2007-03-16 at 12:56 -0400, Jung-uk Kim wrote: > I will import ACPI-CA 20070126 from Intel some time next week. > Current mega-patch against -CURRENT is here: > > http://people.freebsd.org/~jkim/acpica-import-20070126.diff.gz > > (Note: Sorry, I had to gzip(1) it because it was too big.) > > This patch should fix many ACPI issues in -CURRENT (ACPI-CA 20051021), > most notably memory leak. Full change log for ACPI-CA from the last > import is here: > > http://people.freebsd.org/~jkim/acpica_changes_20051021_20070126.txt > > I believe it is quite stable because I have been using this patch on > my primary desktop and laptop for a while and it was tested on amd64, > i386, and ia64. However, since the patch is huge, I may have missed > something. If you find something wrong, please let me know before it > is too late. ;-) > Works well here (ThinkPad X60 1709-73U). Intermittent message about battery charge being critically low at boot time seems to disappear. Thank you, Alexandre "Sunny" Kovalenko. From owner-freebsd-acpi@FreeBSD.ORG Sun Mar 18 05:38:02 2007 Return-Path: X-Original-To: acpi@FreeBSD.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id E14CD16A400 for ; Sun, 18 Mar 2007 05:38:02 +0000 (UTC) (envelope-from nate@root.org) Received: from root.org (root.org [67.118.192.226]) by mx1.freebsd.org (Postfix) with ESMTP id B228F13C465 for ; Sun, 18 Mar 2007 05:38:02 +0000 (UTC) (envelope-from nate@root.org) Received: (qmail 49579 invoked from network); 18 Mar 2007 05:37:52 -0000 Received: from pm9-195.corp.redshift.com (HELO ?192.168.1.51?) (nate-mail@216.228.25.195) by root.org with ESMTPA; 18 Mar 2007 05:37:52 -0000 Message-ID: <45FCD076.4050500@root.org> Date: Sat, 17 Mar 2007 22:39:02 -0700 From: Nate Lawson User-Agent: Thunderbird 1.5.0.9 (X11/20070214) MIME-Version: 1.0 To: "Alexandre \"Sunny\" Kovalenko" References: <200703161256.23996.jkim@FreeBSD.org> <1174183114.1027.2.camel@RabbitsDen> In-Reply-To: <1174183114.1027.2.camel@RabbitsDen> X-Enigmail-Version: 0.94.2.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: acpi@FreeBSD.org, current@FreeBSD.org, Jung-uk Kim Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 18 Mar 2007 05:38:03 -0000 Alexandre "Sunny" Kovalenko wrote: > On Fri, 2007-03-16 at 12:56 -0400, Jung-uk Kim wrote: >> I will import ACPI-CA 20070126 from Intel some time next week. >> Current mega-patch against -CURRENT is here: >> >> http://people.freebsd.org/~jkim/acpica-import-20070126.diff.gz >> >> (Note: Sorry, I had to gzip(1) it because it was too big.) >> >> This patch should fix many ACPI issues in -CURRENT (ACPI-CA 20051021), >> most notably memory leak. Full change log for ACPI-CA from the last >> import is here: >> >> http://people.freebsd.org/~jkim/acpica_changes_20051021_20070126.txt >> >> I believe it is quite stable because I have been using this patch on >> my primary desktop and laptop for a while and it was tested on amd64, >> i386, and ia64. However, since the patch is huge, I may have missed >> something. If you find something wrong, please let me know before it >> is too late. ;-) >> > Works well here (ThinkPad X60 1709-73U). Intermittent message about > battery charge being critically low at boot time seems to disappear. Are you sure that was the acpi-ca patch or the commit I made today to acpi_ec.c? Did you cvsup within about 12 hours or was this test on an earlier -current? You can see by setting the tunable debug.acpi.ec.burst="1" during boot and then see if the messages reappear. Thanks, -- Nate From owner-freebsd-acpi@FreeBSD.ORG Sun Mar 18 10:57:26 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 5754316A403 for ; Sun, 18 Mar 2007 10:57:26 +0000 (UTC) (envelope-from mailinglists@tca-cable-connector.com) Received: from moutng.kundenserver.de (moutng.kundenserver.de [212.227.126.187]) by mx1.freebsd.org (Postfix) with ESMTP id B3DD013C45E for ; Sun, 18 Mar 2007 10:57:25 +0000 (UTC) (envelope-from mailinglists@tca-cable-connector.com) Received: from [218.16.58.208] (helo=munin.tcaportal.com) by mrelayeu.kundenserver.de (node=mrelayeu8) with ESMTP (Nemesis), id 0ML31I-1HSssa1B97-0007UW; Sun, 18 Mar 2007 11:44:50 +0100 Received: from [10.0.1.102] (unknown [219.130.58.55]) by munin.tcaportal.com (Postfix) with ESMTP id AC653A6C64 for ; Sun, 18 Mar 2007 18:41:49 +0800 (HKT) Mime-Version: 1.0 (Apple Message framework v752.3) To: freebsd-acpi@freebsd.org Message-Id: Content-Type: multipart/mixed; boundary=Apple-Mail-4-486468196 From: David Schulz Date: Sun, 18 Mar 2007 18:44:40 +0800 X-Mailer: Apple Mail (2.752.3) X-Provags-ID: V01U2FsdGVkX1+kHtvb3YXh2G8uRhsDdnLQcxE4GfW8euNkfzQ tD16BqkgOs6Kh3rRLVkdCOFIliFBAQcCx3Wdlu9t1+wm58BSGM psWIG6AiGJKMfZdziG/xA== Subject: Compaq Presario V3000 X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 18 Mar 2007 10:57:26 -0000 --Apple-Mail-4-486468196 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Hello all, i have a Compaq Presario V3000. After installing FreeBSD i am getting these type of Messages to my Log. ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\ \_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\ \_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), AE_NO_HARDWARE_RESPONSE I have attached my full dmesg output in dmesg.txt. Is there any way of resolving this? Basically, these Messages continue to appear at maybe 30 second interval. Thanks a lot, David --Apple-Mail-4-486468196 Content-Transfer-Encoding: 7bit Content-Type: text/plain; x-unix-mode=0644; name=dmesg.txt Content-Disposition: attachment; filename=dmesg.txt Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007 root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Genuine Intel(R) CPU T2050 @ 1.60GHz (1596.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8 Features=0xbfe9fbff Features2=0xc189,> AMD Features=0x100000 Cores per package: 2 real memory = 526909440 (502 MB) avail memory = 506023936 (482 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 1 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 cpu0: on acpi0 cpu1: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: at device 2.0 (no driver attached) pci0: at device 2.1 (no driver attached) pci0: at device 27.0 (no driver attached) pcib1: irq 17 at device 28.0 on pci0 pci2: on pcib1 pcib2: irq 18 at device 28.2 on pci0 pci4: on pcib2 pcib3: irq 19 at device 28.3 on pci0 pci5: on pcib3 pci5: at device 0.0 (no driver attached) uhci0: port 0x1820-0x183f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x1840-0x185f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x1860-0x187f irq 21 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0x1880-0x189f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xd4544000-0xd45443ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib4: at device 30.0 on pci0 pci8: on pcib4 fxp0: port 0x3000-0x303f mem 0xd4100000-0xd4100fff irq 20 at device 8.0 on pci8 miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:16:d3:1b:e4:1b fwohci0: <1394 Open Host Controller Interface> mem 0xd4101000-0xd41017ff irq 16 at device 9.0 on pci8 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 07:e4:0a:00:a7:20:50:02 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 06:e4:0a:20:50:02 fwe0: Ethernet address: 06:e4:0a:20:50:02 fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci8: at device 9.1 (no driver attached) pci8: at device 9.2 (no driver attached) pci8: at device 9.3 (no driver attached) pci8: at device 9.4 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0 ata0: on atapci0 ata1: on atapci0 atapci1: port 0x18d0-0x18d7,0x18c4-0x18c7,0x18c8-0x18cf,0x18c0-0x18c3,0x18b0-0x18bf mem 0xd4544400-0xd45447ff irq 19 at device 31.2 on pci0 atapci1: AHCI Version 01.10 controller with 4 ports detected ata2: on atapci1 ata3: on atapci1 ata4: on atapci1 ata5: on atapci1 pci0: at device 31.3 (no driver attached) acpi_tz0: on acpi0 acpi_tz1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 battery0: on acpi0 acpi_acad0: on acpi0 pmtimer0 on isa0 orm0: at iomem 0xce800-0xcffff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0 ppc0: parallel port not found. sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec acd0: CDRW at ata0-master PIO4 ad4: 76319MB at ata2-master SATA150 ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc32a1cc0), AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc32a1b80), AE_NO_HARDWARE_RESPONSE SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad4s1a ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc32a1cc0), AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc32a1b80), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc32a1cc0), AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc32a1b80), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc32a1cc0), AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc32a1b80), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc32a1cc0), AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc32a1b80), AE_NO_HARDWARE_RESPONSE fxp0: link state changed to UP ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc32a1cc0), AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc32a1b80), AE_NO_HARDWARE_RESPONSE --Apple-Mail-4-486468196-- From owner-freebsd-acpi@FreeBSD.ORG Sun Mar 18 11:29:03 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 5D04A16A402 for ; Sun, 18 Mar 2007 11:29:03 +0000 (UTC) (envelope-from almarrie@gmail.com) Received: from nf-out-0910.google.com (nf-out-0910.google.com [64.233.182.189]) by mx1.freebsd.org (Postfix) with ESMTP id E89E513C4C7 for ; Sun, 18 Mar 2007 11:29:02 +0000 (UTC) (envelope-from almarrie@gmail.com) Received: by nf-out-0910.google.com with SMTP id k27so715745nfc for ; Sun, 18 Mar 2007 04:29:02 -0700 (PDT) DKIM-Signature: a=rsa-sha1; c=relaxed/relaxed; d=gmail.com; s=beta; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=F76QD4xgrT6OPRPa4Hix+uG0gSvme+fljIhV0GX3jsTjiL0lXziJlULPBPbMlbz4bpW8Gaq8Yf0RrFXBLaGAUOBH94UXWrcNP1RVCeENNF7lxjGm7D2EeY7Hc6+rYUmrJpI9u5VIHePG9s5JBHUA8v59sm8TXKHqVVRqYeBUkR4= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=RmHvqbx5C/HdOtMCGUrzM8vDvhH3Xo/dI7eLWcI+mfdD3q1gnfTqmj/k8QDMs6IZi6Pvjr4V1qVv/DJFKxW/+5qo5S60BrF31OArwav674fk+/mgPFwtn9p7D3P1w3AeZpBMlPI3V/j3Lf8VFFue1GdMjacqKzDw244vmiIvJzk= Received: by 10.78.180.18 with SMTP id c18mr1882652huf.1174215589860; Sun, 18 Mar 2007 03:59:49 -0700 (PDT) Received: by 10.78.29.15 with HTTP; Sun, 18 Mar 2007 03:59:49 -0700 (PDT) Message-ID: <499c70c0703180359h47f304caqb367a3121ffd674f@mail.gmail.com> Date: Sun, 18 Mar 2007 13:59:49 +0300 From: "Abdullah Ibn Hamad Al-Marri" To: "David Schulz" In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: Cc: freebsd-acpi@freebsd.org Subject: Re: Compaq Presario V3000 X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 18 Mar 2007 11:29:03 -0000 On 3/18/07, David Schulz wrote: > Hello all, > > i have a Compaq Presario V3000. After installing FreeBSD i am getting > these type of Messages to my Log. > > ACPI-0501: *** Error: Handler for [EmbeddedControl] returned > AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed [\ > \_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE > ACPI-1304: *** Error: Method execution failed [\ > \_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), > AE_NO_HARDWARE_RESPONSE > > I have attached my full dmesg output in dmesg.txt. > > Is there any way of resolving this? Basically, these Messages > continue to appear at maybe 30 second interval. > > Thanks a lot, > David Hello, You may need to check [HEADSUP] ACPI-CA 20070126 import thread. -- Regards, -Abdullah Ibn Hamad Al-Marri Arab Portal http://www.WeArab.Net/ From owner-freebsd-acpi@FreeBSD.ORG Sun Mar 18 11:51:04 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 2921316A403 for ; Sun, 18 Mar 2007 11:51:04 +0000 (UTC) (envelope-from mailinglists@tca-cable-connector.com) Received: from moutng.kundenserver.de (moutng.kundenserver.de [212.227.126.186]) by mx1.freebsd.org (Postfix) with ESMTP id B531C13C448 for ; Sun, 18 Mar 2007 11:51:03 +0000 (UTC) (envelope-from mailinglists@tca-cable-connector.com) Received: from [218.16.58.208] (helo=munin.tcaportal.com) by mrelayeu.kundenserver.de (node=mrelayeu1) with ESMTP (Nemesis), id 0MKwpI-1HStuf2QEp-0004p5; Sun, 18 Mar 2007 12:51:02 +0100 Received: from [10.0.1.102] (unknown [219.130.58.55]) by munin.tcaportal.com (Postfix) with ESMTP id BE846A6C60 for ; Sun, 18 Mar 2007 19:48:04 +0800 (HKT) Mime-Version: 1.0 (Apple Message framework v752.3) In-Reply-To: <499c70c0703180359h47f304caqb367a3121ffd674f@mail.gmail.com> References: <499c70c0703180359h47f304caqb367a3121ffd674f@mail.gmail.com> Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Message-Id: <512771AC-926E-4B9E-A6AE-35292AE08919@tca-cable-connector.com> Content-Transfer-Encoding: 7bit From: David Schulz Date: Sun, 18 Mar 2007 19:50:57 +0800 To: freebsd-acpi@freebsd.org X-Mailer: Apple Mail (2.752.3) X-Provags-ID: V01U2FsdGVkX193zwnr2cXwjUcfXGw/MKKORdXNlHjDuI+pWLo +VTkp0yHMiOfowJ5E9R9j5dJmAyichUCUiehKin48EYWgh+dP/ FomqeGbDs+yi7eJDbGRIA== Subject: Re: Compaq Presario V3000 X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 18 Mar 2007 11:51:04 -0000 So this means there is a patch out somewhere that could fix this? could i apply that patch to 6.2 ? Thanks, David On Mar 18, 2007, at 6:59 PM, Abdullah Ibn Hamad Al-Marri wrote: > On 3/18/07, David Schulz wrote: >> Hello all, >> >> i have a Compaq Presario V3000. After installing FreeBSD i am getting >> these type of Messages to my Log. >> >> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned >> AE_NO_HARDWARE_RESPONSE >> ACPI-1304: *** Error: Method execution failed [\ >> \_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE >> ACPI-1304: *** Error: Method execution failed [\ >> \_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), >> AE_NO_HARDWARE_RESPONSE >> >> I have attached my full dmesg output in dmesg.txt. >> >> Is there any way of resolving this? Basically, these Messages >> continue to appear at maybe 30 second interval. >> >> Thanks a lot, >> David > > Hello, > > You may need to check [HEADSUP] ACPI-CA 20070126 import thread. > > -- > Regards, > > -Abdullah Ibn Hamad Al-Marri > Arab Portal > http://www.WeArab.Net/ > From owner-freebsd-acpi@FreeBSD.ORG Sun Mar 18 15:32:45 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id D494216A406 for ; Sun, 18 Mar 2007 15:32:45 +0000 (UTC) (envelope-from mailinglists@tca-cable-connector.com) Received: from moutng.kundenserver.de (moutng.kundenserver.de [212.227.126.174]) by mx1.freebsd.org (Postfix) with ESMTP id 6C73F13C4B0 for ; Sun, 18 Mar 2007 15:32:45 +0000 (UTC) (envelope-from mailinglists@tca-cable-connector.com) Received: from [218.16.58.208] (helo=munin.tcaportal.com) by mrelayeu.kundenserver.de (node=mrelayeu2) with ESMTP (Nemesis), id 0MKwtQ-1HSxMz1bSt-0006OV; Sun, 18 Mar 2007 16:32:44 +0100 Received: from [10.0.1.102] (unknown [219.130.58.55]) by munin.tcaportal.com (Postfix) with ESMTP id 051C3A6C60 for ; Sun, 18 Mar 2007 23:29:30 +0800 (HKT) Mime-Version: 1.0 (Apple Message framework v752.3) In-Reply-To: <499c70c0703180359h47f304caqb367a3121ffd674f@mail.gmail.com> References: <499c70c0703180359h47f304caqb367a3121ffd674f@mail.gmail.com> Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Message-Id: <960632DC-FCA2-463E-9E93-82B8FA0DCB2F@tca-cable-connector.com> Content-Transfer-Encoding: 7bit From: David Schulz Date: Sun, 18 Mar 2007 23:32:20 +0800 To: freebsd-acpi@freebsd.org X-Mailer: Apple Mail (2.752.3) X-Provags-ID: V01U2FsdGVkX1/WBiF0ADSrLT33yVnHoDs8DpbXqUpcT+z8Z+b JOgMCd7MNpoul0Xg70yt5bCqoAc3rYU0r/SU6QgXF6oI7rBwOR NUZsPQNgvcrS6t2qtCcAA== Subject: Re: Compaq Presario V3000 X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 18 Mar 2007 15:32:45 -0000 In addition to below, i also found that if i take my battery out of my laptop, and just start it with the power supply plugged in, everything seems to work fine. as soon i want to use the battery, im having these messages. also, everytime i issue a sysctl -a hw.acpi.battery i get my error messages on ttyv0. sysctl -a hw.acpi.battery yields $ sysctl -a hw.acpi.battery hw.acpi.battery.life: -1 hw.acpi.battery.time: -1 hw.acpi.battery.state: 7 hw.acpi.battery.units: 1 hw.acpi.battery.info_expire: 5 $ Thanks for any Info. Maybe there is a way i can for now somehow disable the acpi part responsible to monitor my battery? David On Mar 18, 2007, at 6:59 PM, Abdullah Ibn Hamad Al-Marri wrote: > On 3/18/07, David Schulz wrote: >> Hello all, >> >> i have a Compaq Presario V3000. After installing FreeBSD i am getting >> these type of Messages to my Log. >> >> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned >> AE_NO_HARDWARE_RESPONSE >> ACPI-1304: *** Error: Method execution failed [\ >> \_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE >> ACPI-1304: *** Error: Method execution failed [\ >> \_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), >> AE_NO_HARDWARE_RESPONSE >> >> I have attached my full dmesg output in dmesg.txt. >> >> Is there any way of resolving this? Basically, these Messages >> continue to appear at maybe 30 second interval. >> >> Thanks a lot, >> David > > Hello, > > You may need to check [HEADSUP] ACPI-CA 20070126 import thread. > > -- > Regards, > > -Abdullah Ibn Hamad Al-Marri > Arab Portal > http://www.WeArab.Net/ > From owner-freebsd-acpi@FreeBSD.ORG Sun Mar 18 15:53:44 2007 Return-Path: X-Original-To: acpi@FreeBSD.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id E10FF16A406; Sun, 18 Mar 2007 15:53:44 +0000 (UTC) (envelope-from alex.kovalenko@verizon.net) Received: from vms044pub.verizon.net (vms044pub.verizon.net [206.46.252.44]) by mx1.freebsd.org (Postfix) with ESMTP id C20D313C4BB; Sun, 18 Mar 2007 15:53:44 +0000 (UTC) (envelope-from alex.kovalenko@verizon.net) Received: from [10.0.3.231] ([141.150.95.47]) by vms044.mailsrvcs.net (Sun Java System Messaging Server 6.2-6.01 (built Apr 3 2006)) with ESMTPA id <0JF300CHRW4OBJX2@vms044.mailsrvcs.net>; Sun, 18 Mar 2007 10:53:13 -0500 (CDT) Date: Sun, 18 Mar 2007 11:53:06 -0400 From: "Alexandre \"Sunny\" Kovalenko" In-reply-to: <45FCD076.4050500@root.org> To: Nate Lawson Message-id: <1174233186.1027.16.camel@RabbitsDen> MIME-version: 1.0 X-Mailer: Evolution 2.8.3 FreeBSD GNOME Team Port Content-type: text/plain Content-transfer-encoding: 7bit References: <200703161256.23996.jkim@FreeBSD.org> <1174183114.1027.2.camel@RabbitsDen> <45FCD076.4050500@root.org> Cc: acpi@FreeBSD.org, current@FreeBSD.org, Jung-uk Kim Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 18 Mar 2007 15:53:45 -0000 On Sat, 2007-03-17 at 22:39 -0700, Nate Lawson wrote: > Alexandre "Sunny" Kovalenko wrote: > > On Fri, 2007-03-16 at 12:56 -0400, Jung-uk Kim wrote: > >> I will import ACPI-CA 20070126 from Intel some time next week. > >> Current mega-patch against -CURRENT is here: > >> > >> http://people.freebsd.org/~jkim/acpica-import-20070126.diff.gz > >> > >> (Note: Sorry, I had to gzip(1) it because it was too big.) > >> > >> This patch should fix many ACPI issues in -CURRENT (ACPI-CA 20051021), > >> most notably memory leak. Full change log for ACPI-CA from the last > >> import is here: > >> > >> http://people.freebsd.org/~jkim/acpica_changes_20051021_20070126.txt > >> > >> I believe it is quite stable because I have been using this patch on > >> my primary desktop and laptop for a while and it was tested on amd64, > >> i386, and ia64. However, since the patch is huge, I may have missed > >> something. If you find something wrong, please let me know before it > >> is too late. ;-) > >> > > Works well here (ThinkPad X60 1709-73U). Intermittent message about > > battery charge being critically low at boot time seems to disappear. > > Are you sure that was the acpi-ca patch or the commit I made today to > acpi_ec.c? Did you cvsup within about 12 hours or was this test on an > earlier -current? > > You can see by setting the tunable debug.acpi.ec.burst="1" during boot > and then see if the messages reappear. > > Thanks, I know that I do not have your acpi_ec.c commit yet: sunny:RabbitsDen>pwd /usr/src/sys/dev/acpica sunny:RabbitsDen>grep -i freebsd acpi_ec.c __FBSDID("$FreeBSD: /repoman/r/ncvs/src/sys/dev/acpica/acpi_ec.c,v 1.69 2007/02/27 00:14:20 njl Exp $"); sunny:RabbitsDen> Alexandre "Sunny" Kovalenko. From owner-freebsd-acpi@FreeBSD.ORG Sun Mar 18 19:27:28 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 7788A16A516 for ; Sun, 18 Mar 2007 19:27:28 +0000 (UTC) (envelope-from nate@root.org) Received: from root.org (root.org [67.118.192.226]) by mx1.freebsd.org (Postfix) with ESMTP id 435D813C4C1 for ; Sun, 18 Mar 2007 19:27:28 +0000 (UTC) (envelope-from nate@root.org) Received: (qmail 12886 invoked from network); 18 Mar 2007 18:21:37 -0000 Received: from pm9-195.corp.redshift.com (HELO ?192.168.1.51?) (nate-mail@216.228.25.195) by root.org with ESMTPA; 18 Mar 2007 18:21:37 -0000 Message-ID: <45FD837D.1080402@root.org> Date: Sun, 18 Mar 2007 11:22:53 -0700 From: Nate Lawson User-Agent: Thunderbird 1.5.0.9 (X11/20070214) MIME-Version: 1.0 To: David Schulz References: <499c70c0703180359h47f304caqb367a3121ffd674f@mail.gmail.com> <512771AC-926E-4B9E-A6AE-35292AE08919@tca-cable-connector.com> In-Reply-To: <512771AC-926E-4B9E-A6AE-35292AE08919@tca-cable-connector.com> X-Enigmail-Version: 0.94.2.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: freebsd-acpi@freebsd.org Subject: Re: Compaq Presario V3000 X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 18 Mar 2007 19:27:28 -0000 > On Mar 18, 2007, at 6:59 PM, Abdullah Ibn Hamad Al-Marri wrote: > >> On 3/18/07, David Schulz wrote: >>> Hello all, >>> >>> i have a Compaq Presario V3000. After installing FreeBSD i am getting >>> these type of Messages to my Log. >>> >>> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned >>> AE_NO_HARDWARE_RESPONSE >>> ACPI-1304: *** Error: Method execution failed [\ >>> \_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE >>> ACPI-1304: *** Error: Method execution failed [\ >>> \_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), >>> AE_NO_HARDWARE_RESPONSE >>> >>> I have attached my full dmesg output in dmesg.txt. >>> >>> Is there any way of resolving this? Basically, these Messages >>> continue to appear at maybe 30 second interval. >>> >>> Thanks a lot, >>> David >> >> Hello, >> >> You may need to check [HEADSUP] ACPI-CA 20070126 import thread. > > So this means there is a patch out somewhere that could fix this? could > i apply that patch to 6.2 ? > > Thanks, > David > I recently committed a major reworking of the embedded controller driver in -current. See this message: http://lists.freebsd.org/pipermail/freebsd-current/2007-February/069525.html It includes a patch to try for 6.x. You may need to tweak the various parameters, again, see the message. -- Nate From owner-freebsd-acpi@FreeBSD.ORG Sun Mar 18 19:28:16 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 8F04416A402 for ; Sun, 18 Mar 2007 19:28:16 +0000 (UTC) (envelope-from nate@root.org) Received: from root.org (root.org [67.118.192.226]) by mx1.freebsd.org (Postfix) with ESMTP id 5F78413C4EE for ; Sun, 18 Mar 2007 19:28:16 +0000 (UTC) (envelope-from nate@root.org) Received: (qmail 12944 invoked from network); 18 Mar 2007 18:22:32 -0000 Received: from pm9-195.corp.redshift.com (HELO ?192.168.1.51?) (nate-mail@216.228.25.195) by root.org with ESMTPA; 18 Mar 2007 18:22:32 -0000 Message-ID: <45FD83B4.6020309@root.org> Date: Sun, 18 Mar 2007 11:23:48 -0700 From: Nate Lawson User-Agent: Thunderbird 1.5.0.9 (X11/20070214) MIME-Version: 1.0 To: "Max N. Boyarov" References: <86zm6gyw31.fsf@bsd.by> <45F8422B.4050701@root.org> <86abyc6x20.fsf@bsd.by> In-Reply-To: <86abyc6x20.fsf@bsd.by> X-Enigmail-Version: 0.94.2.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: freebsd-acpi@freebsd.org Subject: Re: latest Current and acpi X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 18 Mar 2007 19:28:16 -0000 Max N. Boyarov wrote: >>>>>> "NL" == Nate Lawson writes: > > [cut] > NL> I assume you were not disconnecting AC power during that time? These > NL> would be normal messages if you were doing that. > Yes power is connected. > > NL> I think the recent EC update is your issue. I recently committed a > NL> major reworking of the embedded controller driver. See this message: > > NL> http://lists.freebsd.org/pipermail/freebsd-current/2007-February/069525.html > > NL> See this message for a list of things to try. The goal is to diagnose > NL> why the EC is timing out. The thermal misdetection is only a symptom. > > NL> http://lists.freebsd.org/pipermail/freebsd-current/2007-February/069577.html > > NL> The one I think would be most helpful is turning off burst mode, but I > NL> would appreciate your help seeing what combo of polling/total timeout > NL> works for you. > > NL> debug.acpi.ec.burst=0 > this is help. Now i try read source to find how to select > "combo of polling/total timeout". Simple change this sysctls don't suit. I committed a change so that burst mode is disabled by default. > [cut] > NL> The values are in Kelvin if you don't specify a qualifier. You need to > NL> use this (note the "C") > > NL> sysctl hw.acpi.thermal.tz1._CRT=100C > > Thanks, i confused by acpi_thermal(4). =) > > "All temperatures are printed in Celsius. When setting a value by > sysctl(8), do not specify a trailing decimal (i.e., 90 instead of 90.0C)." > I've updated the man page to explain this. -- Nate From owner-freebsd-acpi@FreeBSD.ORG Mon Mar 19 02:08:27 2007 Return-Path: X-Original-To: acpi@FreeBSD.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id E022116A400; Mon, 19 Mar 2007 02:08:27 +0000 (UTC) (envelope-from rpaulo@fnop.net) Received: from core.fnop.net (mx.fnop.net [82.102.11.82]) by mx1.freebsd.org (Postfix) with ESMTP id 2C38D13C448; Mon, 19 Mar 2007 02:08:26 +0000 (UTC) (envelope-from rpaulo@fnop.net) Received: from core.fnop.net (mx.fnop.net [82.102.11.82]) by core.fnop.net (Postfix) with ESMTP id 5DC676905FC; Mon, 19 Mar 2007 01:47:08 +0000 (WET) Received: by core.fnop.net (Postfix, from userid 1015) id 1E295690616; Mon, 19 Mar 2007 01:47:08 +0000 (WET) X-Spam-Checker-Version: SpamAssassin 3.1.7 (2006-10-05) on core.fnop.net X-Spam-Level: X-Spam-Status: No, score=-2.5 required=5.0 tests=AWL,BAYES_00, FORGED_RCVD_HELO autolearn=ham version=3.1.7 Received: from epsilon.local (89-180-155-74.net.novis.pt [89.180.155.74]) by core.fnop.net (Postfix) with ESMTP id B3A046905FC; Mon, 19 Mar 2007 01:47:02 +0000 (WET) Message-ID: <45FDEB7A.7030107@fnop.net> Date: Mon, 19 Mar 2007 01:46:34 +0000 From: Rui Paulo User-Agent: Thunderbird 2.0b2 (Macintosh/20070116) MIME-Version: 1.0 To: Jung-uk Kim References: <200703161256.23996.jkim@FreeBSD.org> In-Reply-To: <200703161256.23996.jkim@FreeBSD.org> Content-Type: multipart/mixed; boundary="------------010609080407060805010802" X-Virus-Scanned: ClamAV using ClamSMTP Cc: acpi@FreeBSD.org, current@FreeBSD.org Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 19 Mar 2007 02:08:28 -0000 This is a multi-part message in MIME format. --------------010609080407060805010802 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Jung-uk Kim wrote: > I will import ACPI-CA 20070126 from Intel some time next week. > Current mega-patch against -CURRENT is here: > > http://people.freebsd.org/~jkim/acpica-import-20070126.diff.gz > > (Note: Sorry, I had to gzip(1) it because it was too big.) > Works fine on a MacBook. Old and new dmesg attached. Regards, -- Rui Paulo | PGP: F0E4 C7C7 1653 79B7 78DC DD73 64FA B2C6 CF45 1F84 --------------010609080407060805010802 Content-Type: text/plain; x-mac-type="0"; x-mac-creator="0"; name="dmesg.diff" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.diff" --- dmesg.mp Sun Mar 18 22:43:41 2007 +++ dmesg.mp.newacpi Sun Mar 18 22:44:04 2007 @@ -2,10 +2,10 @@ Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. -FreeBSD 7.0-CURRENT #0: Thu Mar 15 02:15:45 WET 2007 - rpaulo@macbook.local:/usr/home/rpaulo/freebsd/src/sys/i386/compile/MACBOOK +FreeBSD 7.0-CURRENT #7: Sun Mar 18 22:35:22 WET 2007 + rpaulo@macbook.local:/usr/home/rpaulo/freebsd/obj/usr/home/rpaulo/freebsd/src/sys/MACBOOK Timecounter "i8254" frequency 1193182 Hz quality 0 -CPU: Genuine Intel(R) CPU 1500 @ 2.00GHz (3035.79-MHz 686-class CPU) +CPU: Genuine Intel(R) CPU 1500 @ 2.00GHz (3059.76-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8 Features=0xbfe9fbff Features2=0xc1a9> @@ -17,23 +17,35 @@ FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 +ACPI: RSDP @ 0x0xfe020/0x0024 (v 2 APPLE ) +ACPI: XSDT @ 0x0x4eefd120/0x0074 (v 1 APPLE Apple00 0x00000061 0x01000013) +ACPI: FACP @ 0x0x4eefb000/0x00F4 (v 3 APPLE Apple00 0x00000061 Loki 0x0000005F) +ACPI: DSDT @ 0x0x4eef0000/0x4221 (v 1 APPLE MacBook 0x00010001 INTL 0x20050309) +ACPI: FACS @ 0x0x4eec1000/0x0040 +ACPI: HPET @ 0x0x4eefa000/0x0038 (v 1 APPLE Apple00 0x00000001 Loki 0x0000005F) +ACPI: APIC @ 0x0x4eef9000/0x0068 (v 1 APPLE Apple00 0x00000001 Loki 0x0000005F) +ACPI: MCFG @ 0x0x4eef8000/0x003C (v 1 APPLE Apple00 0x00000001 Loki 0x0000005F) +ACPI: ASF! @ 0x0x4eef7000/0x009C (v 32 APPLE Apple00 0x00000001 Loki 0x0000005F) +ACPI: SBST @ 0x0x4eef6000/0x0030 (v 1 APPLE Apple00 0x00000001 Loki 0x0000005F) +ACPI: ECDT @ 0x0x4eef5000/0x0053 (v 1 APPLE Apple00 0x00000001 Loki 0x0000005F) +ACPI: SSDT @ 0x0x4eebc000/0x064F (v 1 APPLE SataPri 0x00001000 INTL 0x20050309) +ACPI: SSDT @ 0x0x4eebb000/0x069C (v 1 APPLE SataSec 0x00001000 INTL 0x20050309) +ACPI: SSDT @ 0x0x4eeef000/0x04DC (v 1 APPLE CpuPm 0x00003000 INTL 0x20050309) ioapic0: Changing APIC ID to 1 ioapic0 irqs 0-23 on motherboard ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: on motherboard acpi0: [ITHREAD] acpi_ec0: port 0x62,0x66 on acpi0 -acpi_bus_number: can't get _ADR -acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) -acpi_bus_number: can't get _ADR -acpi_bus_number: can't get _ADR Timecounter "HPET" frequency 14318180 Hz quality 2000 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: on acpi0 +ACPI: SSDT @ 0x0x4eeb9910/0x02C3 (v 1 APPLE Cpu0Cst 0x00003001 INTL 0x20050309) acpi_throttle0: on cpu0 cpu1: on acpi0 +ACPI: SSDT @ 0x0x4eeb8f10/0x0085 (v 1 APPLE Cpu1Cst 0x00003000 INTL 0x20050309) acpi_throttle1: on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 @@ -103,7 +115,7 @@ usb4: USB revision 2.0 uhub4: on usb4 uhub4: 8 ports with 8 removable, self powered -ugen0: on uhub4 +ugen0: on uhub4 pcib3: at device 30.0 on pci0 pci3: on pcib3 pci3: at device 3.0 (no driver attached) --------------010609080407060805010802 Content-Type: text/plain; x-mac-type="0"; x-mac-creator="0"; name="dmesg.mp" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.mp" Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT #0: Thu Mar 15 02:15:45 WET 2007 rpaulo@macbook.local:/usr/home/rpaulo/freebsd/src/sys/i386/compile/MACBOOK Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Genuine Intel(R) CPU 1500 @ 2.00GHz (3035.79-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8 Features=0xbfe9fbff Features2=0xc1a9> AMD Features=0x100000 Cores per package: 2 real memory = 1309474816 (1248 MB) avail memory = 1273008128 (1214 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 1 ioapic0 irqs 0-23 on motherboard ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: on motherboard acpi0: [ITHREAD] acpi_ec0: port 0x62,0x66 on acpi0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR Timecounter "HPET" frequency 14318180 Hz quality 2000 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: on acpi0 acpi_throttle0: on cpu0 cpu1: on acpi0 acpi_throttle1: on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 acpi_acad0: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 vgapci0: port 0x20f0-0x20f7 mem 0x90380000-0x903fffff,0x80000000-0x8fffffff,0x90400000-0x9043ffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 agp0: detected 16124k stolen memory agp0: aperture size is 256M vgapci1: mem 0x90300000-0x9037ffff at device 2.1 on pci0 pci0: at device 7.0 (no driver attached) pci0: at device 27.0 (no driver attached) pcib1: irq 17 at device 28.0 on pci0 pci1: on pcib1 mskc0: port 0x1000-0x10ff mem 0x90200000-0x90203fff irq 16 at device 0.0 on pci1 msk0: on mskc0 msk0: Ethernet address: 00:17:f2:27:48:2c miibus0: on msk0 e1000phy0: PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto mskc0: [FILTER] pcib2: irq 16 at device 28.1 on pci0 pci2: on pcib2 ath0: mem 0x90100000-0x9010ffff irq 17 at device 0.0 on pci2 ath0: [ITHREAD] ath0: using obsoleted if_watchdog interface ath0: Ethernet address: 00:17:f2:44:ba:50 ath0: mac 10.3 phy 6.1 radio 10.2 uhci0: port 0x20a0-0x20bf irq 21 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x2080-0x209f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x2060-0x207f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: on uhci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: port 0x2040-0x205f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb3: on uhci3 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0x90445400-0x904457ff irq 21 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: on usb4 uhub4: 8 ports with 8 removable, self powered ugen0: on uhub4 pcib3: at device 30.0 on pci0 pci3: on pcib3 pci3: at device 3.0 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x20c0-0x20cf irq 18 at device 31.1 on pci0 ata0: on atapci0 ata0: [ITHREAD] ata1: on atapci0 ata1: [ITHREAD] atapci1: port 0x20d8-0x20df,0x20fc-0x20ff,0x20d0-0x20d7,0x20f8-0x20fb,0x2020-0x202f mem 0x90445000-0x904453ff irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] ata2: on atapci1 ata2: [ITHREAD] ata3: on atapci1 ata3: [ITHREAD] pci0: at device 31.3 (no driver attached) battery0: on acpi0 pmtimer0 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: on uhub0 ums0: 4 buttons and Z dir. ukbd0: on uhub0 kbd0 at ukbd0 ums1: on uhub0 ums1: 3 buttons. uhid0: on uhub0 uhid1: on uhub2 ukbd1: on uhub3 kbd1 at ukbd1 ums2: on uhub3 ums2: 5 buttons. Timecounters tick every 1.000 msec acd0: DVDR at ata0-master UDMA66 ad5: 57231MB at ata2-slave SATA150 SMP: AP CPU #1 Launched! GEOM_LABEL: Label for provider ad5p1 is msdosfs/EFI. WARNING: Expected rawoffset 0, found 88752168 Trying to mount root from ufs:/dev/ad5s3a GEOM_LABEL: Label msdosfs/EFI removed. msk0: link state changed to UP --------------010609080407060805010802 Content-Type: text/plain; x-mac-type="0"; x-mac-creator="0"; name="dmesg.mp.newacpi" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.mp.newacpi" Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT #7: Sun Mar 18 22:35:22 WET 2007 rpaulo@macbook.local:/usr/home/rpaulo/freebsd/obj/usr/home/rpaulo/freebsd/src/sys/MACBOOK Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Genuine Intel(R) CPU 1500 @ 2.00GHz (3063.74-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8 Features=0xbfe9fbff Features2=0xc1a9> AMD Features=0x100000 Cores per package: 2 real memory = 1309474816 (1248 MB) avail memory = 1273008128 (1214 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI: RSDP @ 0x0xfe020/0x0024 (v 2 APPLE ) ACPI: XSDT @ 0x0x4eefd120/0x0074 (v 1 APPLE Apple00 0x00000061 0x01000013) ACPI: FACP @ 0x0x4eefb000/0x00F4 (v 3 APPLE Apple00 0x00000061 Loki 0x0000005F) ACPI: DSDT @ 0x0x4eef0000/0x4221 (v 1 APPLE MacBook 0x00010001 INTL 0x20050309) ACPI: FACS @ 0x0x4eec1000/0x0040 ACPI: HPET @ 0x0x4eefa000/0x0038 (v 1 APPLE Apple00 0x00000001 Loki 0x0000005F) ACPI: APIC @ 0x0x4eef9000/0x0068 (v 1 APPLE Apple00 0x00000001 Loki 0x0000005F) ACPI: MCFG @ 0x0x4eef8000/0x003C (v 1 APPLE Apple00 0x00000001 Loki 0x0000005F) ACPI: ASF! @ 0x0x4eef7000/0x009C (v 32 APPLE Apple00 0x00000001 Loki 0x0000005F) ACPI: SBST @ 0x0x4eef6000/0x0030 (v 1 APPLE Apple00 0x00000001 Loki 0x0000005F) ACPI: ECDT @ 0x0x4eef5000/0x0053 (v 1 APPLE Apple00 0x00000001 Loki 0x0000005F) ACPI: SSDT @ 0x0x4eebc000/0x064F (v 1 APPLE SataPri 0x00001000 INTL 0x20050309) ACPI: SSDT @ 0x0x4eebb000/0x069C (v 1 APPLE SataSec 0x00001000 INTL 0x20050309) ACPI: SSDT @ 0x0x4eeef000/0x04DC (v 1 APPLE CpuPm 0x00003000 INTL 0x20050309) ioapic0: Changing APIC ID to 1 ioapic0 irqs 0-23 on motherboard ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: on motherboard acpi0: [ITHREAD] acpi_ec0: port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) Timecounter "HPET" frequency 14318180 Hz quality 2000 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: on acpi0 ACPI: SSDT @ 0x0x4eeb9910/0x02C3 (v 1 APPLE Cpu0Cst 0x00003001 INTL 0x20050309) acpi_throttle0: on cpu0 cpu1: on acpi0 ACPI: SSDT @ 0x0x4eeb8f10/0x0085 (v 1 APPLE Cpu1Cst 0x00003000 INTL 0x20050309) acpi_throttle1: on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 acpi_acad0: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 vgapci0: port 0x20f0-0x20f7 mem 0x90380000-0x903fffff,0x80000000-0x8fffffff,0x90400000-0x9043ffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 agp0: detected 16124k stolen memory agp0: aperture size is 256M vgapci1: mem 0x90300000-0x9037ffff at device 2.1 on pci0 pci0: at device 7.0 (no driver attached) pci0: at device 27.0 (no driver attached) pcib1: irq 17 at device 28.0 on pci0 pci1: on pcib1 mskc0: port 0x1000-0x10ff mem 0x90200000-0x90203fff irq 16 at device 0.0 on pci1 msk0: on mskc0 msk0: Ethernet address: 00:17:f2:27:48:2c miibus0: on msk0 e1000phy0: PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto mskc0: [FILTER] pcib2: irq 16 at device 28.1 on pci0 pci2: on pcib2 ath0: mem 0x90100000-0x9010ffff irq 17 at device 0.0 on pci2 ath0: [ITHREAD] ath0: using obsoleted if_watchdog interface ath0: Ethernet address: 00:17:f2:44:ba:50 ath0: mac 10.3 phy 6.1 radio 10.2 uhci0: port 0x20a0-0x20bf irq 21 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x2080-0x209f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x2060-0x207f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: on uhci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: port 0x2040-0x205f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb3: on uhci3 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0x90445400-0x904457ff irq 21 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: on usb4 uhub4: 8 ports with 8 removable, self powered ugen0: on uhub4 pcib3: at device 30.0 on pci0 pci3: on pcib3 pci3: at device 3.0 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x20c0-0x20cf irq 18 at device 31.1 on pci0 ata0: on atapci0 ata0: [ITHREAD] ata1: on atapci0 ata1: [ITHREAD] atapci1: port 0x20d8-0x20df,0x20fc-0x20ff,0x20d0-0x20d7,0x20f8-0x20fb,0x2020-0x202f mem 0x90445000-0x904453ff irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] ata2: on atapci1 ata2: [ITHREAD] ata3: on atapci1 ata3: [ITHREAD] pci0: at device 31.3 (no driver attached) battery0: on acpi0 pmtimer0 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: on uhub0 ums0: 4 buttons and Z dir. ukbd0: on uhub0 kbd0 at ukbd0 ums1: on uhub0 ums1: 3 buttons. uhid0: on uhub0 uhid1: on uhub2 ukbd1: on uhub3 kbd1 at ukbd1 ums2: on uhub3 ums2: 5 buttons. Timecounters tick every 1.000 msec acd0: DVDR at ata0-master UDMA66 ad5: 57231MB at ata2-slave SATA150 SMP: AP CPU #1 Launched! GEOM_LABEL: Label for provider ad5p1 is msdosfs/EFI. WARNING: Expected rawoffset 0, found 88752168 Trying to mount root from ufs:/dev/ad5s3a GEOM_LABEL: Label msdosfs/EFI removed. msk0: link state changed to UP --------------010609080407060805010802-- From owner-freebsd-acpi@FreeBSD.ORG Mon Mar 19 02:20:59 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 5A74716A400 for ; Mon, 19 Mar 2007 02:20:59 +0000 (UTC) (envelope-from mailinglists@tca-cable-connector.com) Received: from moutng.kundenserver.de (moutng.kundenserver.de [212.227.126.174]) by mx1.freebsd.org (Postfix) with ESMTP id E4CE713C458 for ; Mon, 19 Mar 2007 02:20:58 +0000 (UTC) (envelope-from mailinglists@tca-cable-connector.com) Received: from [218.16.58.208] (helo=munin.tcaportal.com) by mrelayeu.kundenserver.de (node=mrelayeu3) with ESMTP (Nemesis), id 0MKxQS-1HT7UX0pQ6-000360; Mon, 19 Mar 2007 03:20:58 +0100 Received: from [10.0.1.102] (bofh.tcaportal.com [10.0.1.102]) by munin.tcaportal.com (Postfix) with ESMTP id 705F9A6C60 for ; Mon, 19 Mar 2007 10:17:59 +0800 (HKT) Mime-Version: 1.0 (Apple Message framework v752.3) In-Reply-To: <45FD837D.1080402@root.org> References: <499c70c0703180359h47f304caqb367a3121ffd674f@mail.gmail.com> <512771AC-926E-4B9E-A6AE-35292AE08919@tca-cable-connector.com> <45FD837D.1080402@root.org> Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Message-Id: <82206769-500E-437A-B982-D411140101E6@tca-cable-connector.com> Content-Transfer-Encoding: 7bit From: David Schulz Date: Mon, 19 Mar 2007 10:20:52 +0800 To: freebsd-acpi@freebsd.org X-Mailer: Apple Mail (2.752.3) X-Provags-ID: V01U2FsdGVkX1+ugCoIPNSGOASpQlTTrq1fEwuvjDa+uy4siX9 cU8aapk0ZRATS63rTIZbdM0Fg8J/0b5Q9SK1/y1SlCVZmKKDis 2QkBUui1Du5J1BS8oanPw== Subject: Re: Compaq Presario V3000 X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 19 Mar 2007 02:20:59 -0000 I downloaded and applied this patch without any errors. when booting up i manually loaded the new acpi.ko, but once finished booting i still get the exact same messages. On Mar 19, 2007, at 2:22 AM, Nate Lawson wrote: >> On Mar 18, 2007, at 6:59 PM, Abdullah Ibn Hamad Al-Marri wrote: >> >>> On 3/18/07, David Schulz >>> wrote: >>>> Hello all, >>>> >>>> i have a Compaq Presario V3000. After installing FreeBSD i am >>>> getting >>>> these type of Messages to my Log. >>>> >>>> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned >>>> AE_NO_HARDWARE_RESPONSE >>>> ACPI-1304: *** Error: Method execution failed [\ >>>> \_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), >>>> AE_NO_HARDWARE_RESPONSE >>>> ACPI-1304: *** Error: Method execution failed [\ >>>> \_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), >>>> AE_NO_HARDWARE_RESPONSE >>>> >>>> I have attached my full dmesg output in dmesg.txt. >>>> >>>> Is there any way of resolving this? Basically, these Messages >>>> continue to appear at maybe 30 second interval. >>>> >>>> Thanks a lot, >>>> David >>> >>> Hello, >>> >>> You may need to check [HEADSUP] ACPI-CA 20070126 import thread. >> >> So this means there is a patch out somewhere that could fix this? >> could >> i apply that patch to 6.2 ? >> >> Thanks, >> David >> > > I recently committed a major reworking of the embedded controller > driver in -current. See this message: > > http://lists.freebsd.org/pipermail/freebsd-current/2007-February/ > 069525.html > > It includes a patch to try for 6.x. You may need to tweak the various > parameters, again, see the message. > > -- > Nate > From owner-freebsd-acpi@FreeBSD.ORG Mon Mar 19 06:27:42 2007 Return-Path: X-Original-To: acpi@freebsd.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 2A0DB16A403 for ; Mon, 19 Mar 2007 06:27:42 +0000 (UTC) (envelope-from zbeeble@gmail.com) Received: from mu-out-0910.google.com (mu-out-0910.google.com [209.85.134.189]) by mx1.freebsd.org (Postfix) with ESMTP id ADA3613C484 for ; Mon, 19 Mar 2007 06:27:41 +0000 (UTC) (envelope-from zbeeble@gmail.com) Received: by mu-out-0910.google.com with SMTP id g7so1638044muf for ; Sun, 18 Mar 2007 23:27:40 -0700 (PDT) DKIM-Signature: a=rsa-sha1; c=relaxed/relaxed; d=gmail.com; s=beta; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:references; b=txIytrwvHLtd/Nhlh6HcPMDenBqSPOwr+1dqN+OpaJxUY5mS0WHzpchT0VJHMFlY+kBTxXIkm/ReQWCnCt4JfhL+HfDj7RrFH6F2kvYpV1HFXQjnUWSjBSfce8oXT5MvYwXXdlgyFCrIaV++In2v3sZxfBbQP8PlcTtRKVxLSqI= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:references; b=dQv8RTUZ4IX6PkENS4fDGzTfvxqVC9rKieQ5iPHV4mv33Mivfd6WNALyFDgjiU0orlFj44DrEuDUK0CMUTt7IkOUOe1D3jy352S/mXCvIAs8ktJCs6gIUk2YeMJA9d+RZoFQdOUbFRrIj/JyAdPuSTH+KuelxoU/MNW7xTc1tJY= Received: by 10.82.114.3 with SMTP id m3mr9304902buc.1174283953159; Sun, 18 Mar 2007 22:59:13 -0700 (PDT) Received: by 10.82.175.17 with HTTP; Sun, 18 Mar 2007 22:59:13 -0700 (PDT) Message-ID: <5f67a8c40703182259y1fb0fd85r47b16cca35cd4025@mail.gmail.com> Date: Mon, 19 Mar 2007 00:59:13 -0500 From: "Zaphod Beeblebrox" To: "Rui Paulo" In-Reply-To: <45FDEB7A.7030107@fnop.net> MIME-Version: 1.0 References: <200703161256.23996.jkim@FreeBSD.org> <45FDEB7A.7030107@fnop.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: acpi@freebsd.org, current@freebsd.org, Jung-uk Kim Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 19 Mar 2007 06:27:42 -0000 On 3/18/07, Rui Paulo wrote: > > Jung-uk Kim wrote: > > I will import ACPI-CA 20070126 from Intel some time next week. > > Current mega-patch against -CURRENT is here: Any chance this might have some affect on suspending on my Dell XPS? I havn't really investigated the issue in some time (because it never worked)... but I just thought I'd ask... From owner-freebsd-acpi@FreeBSD.ORG Mon Mar 19 11:08:13 2007 Return-Path: X-Original-To: freebsd-acpi@FreeBSD.org Delivered-To: freebsd-acpi@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id A16EB16A404 for ; Mon, 19 Mar 2007 11:08:13 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [69.147.83.40]) by mx1.freebsd.org (Postfix) with ESMTP id 789B613C44B for ; Mon, 19 Mar 2007 11:08:13 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (linimon@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.4/8.13.4) with ESMTP id l2JB8D5N055351 for ; Mon, 19 Mar 2007 11:08:13 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from linimon@localhost) by freefall.freebsd.org (8.13.4/8.13.4/Submit) id l2JB8CXO055347 for freebsd-acpi@FreeBSD.org; Mon, 19 Mar 2007 11:08:12 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 19 Mar 2007 11:08:12 GMT Message-Id: <200703191108.l2JB8CXO055347@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: linimon set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-acpi@FreeBSD.org Cc: Subject: Current problem reports assigned to you X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 19 Mar 2007 11:08:13 -0000 Current FreeBSD problem reports Critical problems Serious problems S Tracker Resp. Description -------------------------------------------------------------------------------- o i386/54756 acpi ACPI suspend/resume problem on CF-W2 laptop o i386/55661 acpi ACPI suspend/resume problem on ARMADA M700 o kern/55822 acpi No ACPI power off with SMP kernel o kern/56024 acpi ACPI suspend drains battery while in S3 o i386/64002 acpi acpi problem o i386/67273 acpi [hang] system hangs with acpi and Xfree o i386/72566 acpi ACPI, FreeBSD disables fan on Compaq Armada 1750 o i386/79080 acpi acpi thermal changes freezes HP nx6110 o i386/79081 acpi ACPI suspend/resume not working on HP nx6110 o kern/104625 acpi ACPI on ASUS A8N-32 SLI/ASUS P4P800 does not show ther o kern/106924 acpi ACPI resume returns g_vfs_done() errors and kernel pan 11 problems total. Non-critical problems S Tracker Resp. Description -------------------------------------------------------------------------------- o kern/67309 acpi zzz reboot computer (ACPI S3) o i386/69750 acpi Boot without ACPI failed on ASUS L5 o kern/73823 acpi [feature request] acpi / power-on by timer support o kern/76950 acpi ACPI wrongly blacklisted on Micron ClientPro 766Xi sys f kern/90871 acpi ACPI problems with ASUS A8N-VM-CSM o kern/97383 acpi Volume buttons on IBM Thinkpad crash system with ACPI o i386/97468 acpi [acpi] ACPI on ASUS A7V hangs on shutdown -p (power of o kern/98171 acpi [acpi] ACPI 1304 / 0501 errors on Acer 5024WLMi Laptop o i386/102343 acpi ACPI error o kern/103365 acpi [acpi] acpi poweroff doesn't work with geli device att o kern/108017 acpi [acpi]: Acer Aspire 5600 o kern/108488 acpi ACPI-1304: *** Error: Method execution failed o kern/108581 acpi sysctl: hw.acpi.cpu.cx_lowest: Invalid argument o kern/108695 acpi [ACPI]: Fatal trap 9: general protection fault when in o kern/109207 acpi ACPI Promlem 15 problems total. From owner-freebsd-acpi@FreeBSD.ORG Mon Mar 19 15:26:46 2007 Return-Path: X-Original-To: acpi@FreeBSD.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 83D8616A504 for ; Mon, 19 Mar 2007 15:26:46 +0000 (UTC) (envelope-from eksffa@freebsdbrasil.com.br) Received: from capeta.freebsdbrasil.com.br (vrrp.freebsdbrasil.com.br [200.210.70.30]) by mx1.freebsd.org (Postfix) with SMTP id AAB2E13C45E for ; Mon, 19 Mar 2007 15:26:45 +0000 (UTC) (envelope-from eksffa@freebsdbrasil.com.br) Received: (qmail 54430 invoked by uid 0); 19 Mar 2007 12:05:28 -0300 Received: from eksffa@freebsdbrasil.com.br by capeta.freebsdbrasil.com.br by uid 82 with qmail-scanner-1.22 (spamassassin: 2.64. Clear:RC:1(201.58.33.201):. Processed in 8.230347 secs); 19 Mar 2007 15:05:28 -0000 Received: from unknown (HELO ?10.69.69.69?) (201.58.33.201) by capeta.freebsdbrasil.com.br with SMTP; 19 Mar 2007 12:05:18 -0300 Message-ID: <45FEA516.1050103@freebsdbrasil.com.br> Date: Mon, 19 Mar 2007 11:58:30 -0300 From: Patrick Tracanelli Organization: FreeBSD Brasil LTDA User-Agent: Thunderbird 1.5.0.9 (X11/20070131) MIME-Version: 1.0 To: Jung-uk Kim References: <200703161256.23996.jkim@FreeBSD.org> <20070316224222.GD1926@haakonia.hitnet.RWTH-Aachen.DE> In-Reply-To: <20070316224222.GD1926@haakonia.hitnet.RWTH-Aachen.DE> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: acpi@FreeBSD.org, current@FreeBSD.org Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 19 Mar 2007 15:26:46 -0000 Is it 3.0(a) revision? -- Patrick Tracanelli From owner-freebsd-acpi@FreeBSD.ORG Mon Mar 19 16:03:00 2007 Return-Path: X-Original-To: acpi@freebsd.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 9A02216A409; Mon, 19 Mar 2007 16:03:00 +0000 (UTC) (envelope-from jandrese@mitre.org) Received: from smtp-bedford.mitre.org (smtp-bedford.mitre.org [192.160.51.76]) by mx1.freebsd.org (Postfix) with ESMTP id EB74C13C4CE; Mon, 19 Mar 2007 16:02:59 +0000 (UTC) (envelope-from jandrese@mitre.org) Received: from smtp-bedford.mitre.org (localhost.localdomain [127.0.0.1]) by smtp-bedford.mitre.org (8.12.11.20060308/8.12.11) with SMTP id l2JFKDhP001159; Mon, 19 Mar 2007 11:20:13 -0400 Received: from smtp-bedford.mitre.org (localhost.localdomain [127.0.0.1]) by smtp-bedford.mitre.org (Postfix) with ESMTP id 480C3BF81; Mon, 19 Mar 2007 11:20:13 -0400 (EDT) Received: from IMCFE1.MITRE.ORG (imcfe1.mitre.org [129.83.29.3]) by smtp-bedford.mitre.org (8.12.11.20060308/8.12.11) with ESMTP id l2JFKDQN001132; Mon, 19 Mar 2007 11:20:13 -0400 Received: from IMCSRV6.MITRE.ORG ([129.83.20.237]) by IMCFE1.MITRE.ORG with Microsoft SMTPSVC(6.0.3790.1830); Mon, 19 Mar 2007 11:20:12 -0400 X-MimeOLE: Produced By Microsoft Exchange V6.5 Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----_=_NextPart_001_01C76A3A.164B907F" Date: Mon, 19 Mar 2007 11:20:10 -0400 Message-ID: <53B52415C756A84E8A169F0E3673A32925FF83@IMCSRV6.MITRE.ORG> In-Reply-To: <200703161256.23996.jkim@FreeBSD.org> X-MS-Has-Attach: yes X-MS-TNEF-Correlator: Thread-Topic: [HEADSUP] ACPI-CA 20070126 import Thread-Index: Acdn754ywT7m3sdlTdaSmsTv67bDHACSbPGQ References: <200703161256.23996.jkim@FreeBSD.org> From: "Andresen, Jason R." To: "Jung-uk Kim" , X-OriginalArrivalTime: 19 Mar 2007 15:20:12.0237 (UTC) FILETIME=[168D87D0:01C76A3A] Cc: current@freebsd.org Subject: RE: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 19 Mar 2007 16:03:00 -0000 This is a multi-part message in MIME format. ------_=_NextPart_001_01C76A3A.164B907F Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable From: owner-freebsd-current@freebsd.org [mailto:owner-freebsd-current@freebsd.org] On Behalf Of Jung-uk Kim > >I will import ACPI-CA 20070126 from Intel some time next week. =20 >Current mega-patch against -CURRENT is here: > >http://people.freebsd.org/~jkim/acpica-import-20070126.diff.gz > >(Note: Sorry, I had to gzip(1) it because it was too big.) > >This patch should fix many ACPI issues in -CURRENT (ACPI-CA 20051021), >most notably memory leak. Full change log for ACPI-CA from the last=20 >import is here: > >http://people.freebsd.org/~jkim/acpica_changes_20051021_20070126.txt > >I believe it is quite stable because I have been using this patch on=20 >my primary desktop and laptop for a while and it was tested on amd64,=20 >i386, and ia64. However, since the patch is huge, I may have missed=20 >something. If you find something wrong, please let me know before it=20 >is too late. ;-) This patch did the trick on my 680i based motherboard. Previously I had to disable ACPI to get it to boot due to miswired PCI interrupts, but now it works like a charm. Dmesg attached for reference. ------_=_NextPart_001_01C76A3A.164B907F Content-Type: application/octet-stream; name="dmesg.boot" Content-Transfer-Encoding: base64 Content-Description: dmesg.boot Content-Disposition: attachment; filename="dmesg.boot" Q29weXJpZ2h0IChjKSAxOTkyLTIwMDcgVGhlIEZyZWVCU0QgUHJvamVjdC4KQ29weXJpZ2h0IChj KSAxOTc5LCAxOTgwLCAxOTgzLCAxOTg2LCAxOTg4LCAxOTg5LCAxOTkxLCAxOTkyLCAxOTkzLCAx OTk0CglUaGUgUmVnZW50cyBvZiB0aGUgVW5pdmVyc2l0eSBvZiBDYWxpZm9ybmlhLiBBbGwgcmln aHRzIHJlc2VydmVkLgpGcmVlQlNEIGlzIGEgcmVnaXN0ZXJlZCB0cmFkZW1hcmsgb2YgVGhlIEZy ZWVCU0QgRm91bmRhdGlvbi4KRnJlZUJTRCA3LjAtQ1VSUkVOVCAjODogRnJpIE1hciAxNiAxNjow NzozMCBFRFQgMjAwNwogICAgcm9vdEBlc2NhZmxvd25lLmNleWFoLm9yZzovYmFja3VwL29iai9k YXRhL3NyYy9zeXMvRVNDQUZMT1dORQpUaW1lY291bnRlciAiaTgyNTQiIGZyZXF1ZW5jeSAxMTkz MTgyIEh6IHF1YWxpdHkgMApDUFU6IEludGVsKFIpIENvcmUoVE0pMiBDUFUgICAgICAgICAgNjYw MCAgQCAyLjQwR0h6ICgyNDAwLjAyLU1IeiA2ODYtY2xhc3MgQ1BVKQogIE9yaWdpbiA9ICJHZW51 aW5lSW50ZWwiICBJZCA9IDB4NmY2ICBTdGVwcGluZyA9IDYKICBGZWF0dXJlcz0weGJmZWJmYmZm PEZQVSxWTUUsREUsUFNFLFRTQyxNU1IsUEFFLE1DRSxDWDgsQVBJQyxTRVAsTVRSUixQR0UsTUNB LENNT1YsUEFULFBTRTM2LENMRkxVU0gsRFRTLEFDUEksTU1YLEZYU1IsU1NFLFNTRTIsU1MsSFRU LFRNLFBCRT4KICBGZWF0dXJlczI9MHhlM2JkPFNTRTMsUlNWRDIsTU9OLERTX0NQTCxWTVgsRVNU LFRNMixTU1NFMyxDWDE2LFhUUFIsPGIxNT4+CiAgQU1EIEZlYXR1cmVzPTB4MjAxMDAwMDA8Tlgs TE0+CiAgQU1EIEZlYXR1cmVzMj0weDE8TEFIRj4KICBDb3JlcyBwZXIgcGFja2FnZTogMgpyZWFs IG1lbW9yeSAgPSAyMTQ2MzY5NTM2ICgyMDQ2IE1CKQphdmFpbCBtZW1vcnkgPSAyMDg2NzA3MjAw ICgxOTkwIE1CKQpBQ1BJIEFQSUMgVGFibGU6IDxOdmlkaWEgTlZEQUFDUEk+CkZyZWVCU0QvU01Q OiBNdWx0aXByb2Nlc3NvciBTeXN0ZW0gRGV0ZWN0ZWQ6IDIgQ1BVcwogY3B1MCAoQlNQKTogQVBJ QyBJRDogIDAKIGNwdTEgKEFQKTogQVBJQyBJRDogIDEKQUNQSTogUlNEUCBAIDB4MHhmN2YwMC8w eDAwMTQgKHYgIDAgTnZpZGlhKQpBQ1BJOiBSU0RUIEAgMHgweDdmZWYzMDQwLzB4MDAzOCAodiAg MSBOdmlkaWEgTlZEQUFDUEkgMHg0MjMwMkUzMSBOVkRBIDB4MDAwMDAwMDApCkFDUEk6IEZBQ1Ag QCAweDB4N2ZlZjMwYzAvMHgwMDc0ICh2ICAxIE52aWRpYSBOVkRBQUNQSSAweDQyMzAyRTMxIE5W REEgMHgwMDAwMDAwMCkKQUNQSTogRFNEVCBAIDB4MHg3ZmVmMzE4MC8weDU2MzAgKHYgIDEgTlZJ RElBIE5WREFBQ1BJIDB4MDAwMDEwMDAgTVNGVCAweDAzMDAwMDAwKQpBQ1BJOiBGQUNTIEAgMHgw eDdmZWYwMDAwLzB4MDA0MApBQ1BJOiBIUEVUIEAgMHgweDdmZWY4OTAwLzB4MDAzOCAodiAgMSBO dmlkaWEgTlZEQUFDUEkgMHg0MjMwMkUzMSBOVkRBIDB4MDAwMDAwOTgpCkFDUEk6IFdEUlQgQCAw eDB4N2ZlZjg5ODAvMHgwMDQ3ICh2ICAxIE52aWRpYSBOVkRBQUNQSSAweDQyMzAyRTMxIE5WREEg MHgwMDAwMDAwMCkKQUNQSTogTUNGRyBAIDB4MHg3ZmVmOGE0MC8weDAwM0MgKHYgIDEgTnZpZGlh IE5WREFBQ1BJIDB4NDIzMDJFMzEgTlZEQSAweDAwMDAwMDAwKQpBQ1BJOiBBUElDIEAgMHgweDdm ZWY4ODAwLzB4MDA5OCAodiAgMSBOdmlkaWEgTlZEQUFDUEkgMHg0MjMwMkUzMSBOVkRBIDB4MDAw MDAwMDApCmlvYXBpYzA6IENoYW5naW5nIEFQSUMgSUQgdG8gNAppb2FwaWMwIDxWZXJzaW9uIDEu MT4gaXJxcyAwLTIzIG9uIG1vdGhlcmJvYXJkCmtiZDEgYXQga2JkbXV4MAphY3BpMDogPE52aWRp YSBOVkRBQUNQST4gb24gbW90aGVyYm9hcmQKYWNwaTA6IFtJVEhSRUFEXQphY3BpMDogUG93ZXIg QnV0dG9uIChmaXhlZCkKVGltZWNvdW50ZXIgIkFDUEktZmFzdCIgZnJlcXVlbmN5IDM1Nzk1NDUg SHogcXVhbGl0eSAxMDAwCmFjcGlfdGltZXIwOiA8MjQtYml0IHRpbWVyIGF0IDMuNTc5NTQ1TUh6 PiBwb3J0IDB4MTAwOC0weDEwMGIgb24gYWNwaTAKY3B1MDogPEFDUEkgQ1BVPiBvbiBhY3BpMAph Y3BpX3Rocm90dGxlMDogPEFDUEkgQ1BVIFRocm90dGxpbmc+IG9uIGNwdTAKY3B1MTogPEFDUEkg Q1BVPiBvbiBhY3BpMAphY3BpX2J1dHRvbjA6IDxQb3dlciBCdXR0b24+IG9uIGFjcGkwCnBjaWIw OiA8QUNQSSBIb3N0LVBDSSBicmlkZ2U+IHBvcnQgMHhjZjgtMHhjZmYgb24gYWNwaTAKcGNpMDog PEFDUEkgUENJIGJ1cz4gb24gcGNpYjAKcGNpYjA6IEhUIEJyaWRnZSBhdCAwOjE0OjAgaGFzIG5v bi1kZWZhdWx0IE1TSSB3aW5kb3cgMHgzMDIwMDBhCnBjaWIwOiBIVCBCcmlkZ2UgYXQgMDoxNDox IGhhcyBub24tZGVmYXVsdCBNU0kgd2luZG93IDB4MzAyMDAwYQpwY2liMDogSFQgQnJpZGdlIGF0 IDA6MTQ6MiBoYXMgbm9uLWRlZmF1bHQgTVNJIHdpbmRvdyAweDMwMjAwMGEKcGNpYjA6IEhUIEJy aWRnZSBhdCAwOjE1OjEgaGFzIG5vbi1kZWZhdWx0IE1TSSB3aW5kb3cgMHgwCnBjaWIwOiBIVCBC cmlkZ2UgYXQgMDoxNzowIGhhcyBub24tZGVmYXVsdCBNU0kgd2luZG93IDB4NzUwMTEKcGNpYjA6 IEhUIEJyaWRnZSBhdCAwOjE4OjAgaGFzIG5vbi1kZWZhdWx0IE1TSSB3aW5kb3cgMHg3NTAxMQpw Y2kwOiA8bWVtb3J5LCBSQU0+IGF0IGRldmljZSAwLjEgKG5vIGRyaXZlciBhdHRhY2hlZCkKcGNp MDogPG1lbW9yeSwgUkFNPiBhdCBkZXZpY2UgMC4yIChubyBkcml2ZXIgYXR0YWNoZWQpCnBjaTA6 IDxtZW1vcnksIFJBTT4gYXQgZGV2aWNlIDAuMyAobm8gZHJpdmVyIGF0dGFjaGVkKQpwY2kwOiA8 bWVtb3J5LCBSQU0+IGF0IGRldmljZSAwLjQgKG5vIGRyaXZlciBhdHRhY2hlZCkKcGNpMDogPG1l bW9yeSwgUkFNPiBhdCBkZXZpY2UgMC41IChubyBkcml2ZXIgYXR0YWNoZWQpCnBjaTA6IDxtZW1v cnksIFJBTT4gYXQgZGV2aWNlIDAuNiAobm8gZHJpdmVyIGF0dGFjaGVkKQpwY2kwOiA8bWVtb3J5 LCBSQU0+IGF0IGRldmljZSAwLjcgKG5vIGRyaXZlciBhdHRhY2hlZCkKcGNpMDogPG1lbW9yeSwg UkFNPiBhdCBkZXZpY2UgMS4wIChubyBkcml2ZXIgYXR0YWNoZWQpCnBjaTA6IDxtZW1vcnksIFJB TT4gYXQgZGV2aWNlIDEuMSAobm8gZHJpdmVyIGF0dGFjaGVkKQpwY2kwOiA8bWVtb3J5LCBSQU0+ IGF0IGRldmljZSAxLjIgKG5vIGRyaXZlciBhdHRhY2hlZCkKcGNpMDogPG1lbW9yeSwgUkFNPiBh dCBkZXZpY2UgMS4zIChubyBkcml2ZXIgYXR0YWNoZWQpCnBjaTA6IDxtZW1vcnksIFJBTT4gYXQg ZGV2aWNlIDEuNCAobm8gZHJpdmVyIGF0dGFjaGVkKQpwY2kwOiA8bWVtb3J5LCBSQU0+IGF0IGRl dmljZSAxLjUgKG5vIGRyaXZlciBhdHRhY2hlZCkKcGNpMDogPG1lbW9yeSwgUkFNPiBhdCBkZXZp Y2UgMS42IChubyBkcml2ZXIgYXR0YWNoZWQpCnBjaTA6IDxtZW1vcnksIFJBTT4gYXQgZGV2aWNl IDIuMCAobm8gZHJpdmVyIGF0dGFjaGVkKQpwY2kwOiA8bWVtb3J5LCBSQU0+IGF0IGRldmljZSAy LjEgKG5vIGRyaXZlciBhdHRhY2hlZCkKcGNpMDogPG1lbW9yeSwgUkFNPiBhdCBkZXZpY2UgMi4y IChubyBkcml2ZXIgYXR0YWNoZWQpCnBjaWIxOiA8QUNQSSBQQ0ktUENJIGJyaWRnZT4gYXQgZGV2 aWNlIDMuMCBvbiBwY2kwCnBjaTE6IDxBQ1BJIFBDSSBidXM+IG9uIHBjaWIxCm52aWRpYTA6IDxH ZUZvcmNlIDg4MDAgR1RYPiBwb3J0IDB4OWMwMC0weDljN2YgbWVtIDB4Y2MwMDAwMDAtMHhjY2Zm ZmZmZiwweGIwMDAwMDAwLTB4YmZmZmZmZmYsMHhjYTAwMDAwMC0weGNiZmZmZmZmIGlycSAxNiBh dCBkZXZpY2UgMC4wIG9uIHBjaTEKbnZpZGlhMDogW0dJQU5ULUxPQ0tFRF0KbnZpZGlhMDogW0lU SFJFQURdCnBjaTA6IDxtZW1vcnksIFJBTT4gYXQgZGV2aWNlIDkuMCAobm8gZHJpdmVyIGF0dGFj aGVkKQppc2FiMDogPFBDSS1JU0EgYnJpZGdlPiBwb3J0IDB4ZmMwMC0weGZjN2YgYXQgZGV2aWNl IDEwLjAgb24gcGNpMAppc2EwOiA8SVNBIGJ1cz4gb24gaXNhYjAKcGNpMDogPHNlcmlhbCBidXMs IFNNQnVzPiBhdCBkZXZpY2UgMTAuMSAobm8gZHJpdmVyIGF0dGFjaGVkKQpwY2kwOiA8bWVtb3J5 LCBSQU0+IGF0IGRldmljZSAxMC4yIChubyBkcml2ZXIgYXR0YWNoZWQpCm9oY2kwOiA8T0hDSSAo Z2VuZXJpYykgVVNCIGNvbnRyb2xsZXI+IG1lbSAweGNmZmZmMDAwLTB4Y2ZmZmZmZmYgaXJxIDIw IGF0IGRldmljZSAxMS4wIG9uIHBjaTAKb2hjaTA6IFtHSUFOVC1MT0NLRURdCm9oY2kwOiBbSVRI UkVBRF0KdXNiMDogT0hDSSB2ZXJzaW9uIDEuMCwgbGVnYWN5IHN1cHBvcnQKdXNiMDogU01NIGRv ZXMgbm90IHJlc3BvbmQsIHJlc2V0dGluZwp1c2IwOiA8T0hDSSAoZ2VuZXJpYykgVVNCIGNvbnRy b2xsZXI+IG9uIG9oY2kwCnVzYjA6IFVTQiByZXZpc2lvbiAxLjAKdWh1YjA6IDxuVmlkaWEgT0hD SSByb290IGh1YiwgY2xhc3MgOS8wLCByZXYgMS4wMC8xLjAwLCBhZGRyIDE+IG9uIHVzYjAKdWh1 YjA6IDEwIHBvcnRzIHdpdGggMTAgcmVtb3ZhYmxlLCBzZWxmIHBvd2VyZWQKZWhjaTA6IDxFSENJ IChnZW5lcmljKSBVU0IgMi4wIGNvbnRyb2xsZXI+IG1lbSAweGNmZmZlMDAwLTB4Y2ZmZmUwZmYg aXJxIDIxIGF0IGRldmljZSAxMS4xIG9uIHBjaTAKZWhjaTA6IFtHSUFOVC1MT0NLRURdCmVoY2kw OiBbSVRIUkVBRF0KdXNiMTogRUhDSSB2ZXJzaW9uIDEuMAp1c2IxOiBjb21wYW5pb24gY29udHJv bGxlciwgMTAgcG9ydHMgZWFjaDogdXNiMAp1c2IxOiA8RUhDSSAoZ2VuZXJpYykgVVNCIDIuMCBj b250cm9sbGVyPiBvbiBlaGNpMAp1c2IxOiBVU0IgcmV2aXNpb24gMi4wCnVodWIxOiA8blZpZGlh IEVIQ0kgcm9vdCBodWIsIGNsYXNzIDkvMCwgcmV2IDIuMDAvMS4wMCwgYWRkciAxPiBvbiB1c2Ix CnVodWIxOiAxMCBwb3J0cyB3aXRoIDEwIHJlbW92YWJsZSwgc2VsZiBwb3dlcmVkCmF0YXBjaTA6 IDxuVmlkaWEgbkZvcmNlIE1DUDU1IFVETUExMzMgY29udHJvbGxlcj4gcG9ydCAweDFmMC0weDFm NywweDNmNiwweDE3MC0weDE3NywweDM3NiwweGVjMDAtMHhlYzBmIGF0IGRldmljZSAxMy4wIG9u IHBjaTAKYXRhMDogPEFUQSBjaGFubmVsIDA+IG9uIGF0YXBjaTAKYXRhMDogW0lUSFJFQURdCmF0 YTE6IDxBVEEgY2hhbm5lbCAxPiBvbiBhdGFwY2kwCmF0YTE6IFtJVEhSRUFEXQphdGFwY2kxOiA8 blZpZGlhIG5Gb3JjZSBNQ1A1NSBTQVRBMzAwIGNvbnRyb2xsZXI+IHBvcnQgMHg5ZjAtMHg5Zjcs MHhiZjAtMHhiZjMsMHg5NzAtMHg5NzcsMHhiNzAtMHhiNzMsMHhkODAwLTB4ZDgwZiBtZW0gMHhj ZmZmZDAwMC0weGNmZmZkZmZmIGlycSAyMiBhdCBkZXZpY2UgMTQuMCBvbiBwY2kwCmF0YXBjaTE6 IFtJVEhSRUFEXQphdGEyOiA8QVRBIGNoYW5uZWwgMD4gb24gYXRhcGNpMQphdGEyOiBbSVRIUkVB RF0KYXRhMzogPEFUQSBjaGFubmVsIDE+IG9uIGF0YXBjaTEKYXRhMzogW0lUSFJFQURdCmF0YXBj aTI6IDxuVmlkaWEgbkZvcmNlIE1DUDU1IFNBVEEzMDAgY29udHJvbGxlcj4gcG9ydCAweDllMC0w eDllNywweGJlMC0weGJlMywweDk2MC0weDk2NywweGI2MC0weGI2MywweGM0MDAtMHhjNDBmIG1l bSAweGNmZmZjMDAwLTB4Y2ZmZmNmZmYgaXJxIDIzIGF0IGRldmljZSAxNC4xIG9uIHBjaTAKYXRh cGNpMjogW0lUSFJFQURdCmF0YTQ6IDxBVEEgY2hhbm5lbCAwPiBvbiBhdGFwY2kyCmF0YTQ6IFtJ VEhSRUFEXQphdGE1OiA8QVRBIGNoYW5uZWwgMT4gb24gYXRhcGNpMgphdGE1OiBbSVRIUkVBRF0K YXRhcGNpMzogPG5WaWRpYSBuRm9yY2UgTUNQNTUgU0FUQTMwMCBjb250cm9sbGVyPiBwb3J0IDB4 YzAwMC0weGMwMDcsMHhiYzAwLTB4YmMwMywweGI4MDAtMHhiODA3LDB4YjQwMC0weGI0MDMsMHhi MDAwLTB4YjAwZiBtZW0gMHhjZmZmYjAwMC0weGNmZmZiZmZmIGlycSAyMCBhdCBkZXZpY2UgMTQu MiBvbiBwY2kwCmF0YXBjaTM6IFtJVEhSRUFEXQphdGE2OiA8QVRBIGNoYW5uZWwgMD4gb24gYXRh cGNpMwphdGE2OiBbSVRIUkVBRF0KYXRhNzogPEFUQSBjaGFubmVsIDE+IG9uIGF0YXBjaTMKYXRh NzogW0lUSFJFQURdCnBjaWIyOiA8QUNQSSBQQ0ktUENJIGJyaWRnZT4gYXQgZGV2aWNlIDE1LjAg b24gcGNpMApwY2kyOiA8QUNQSSBQQ0kgYnVzPiBvbiBwY2liMgpmd29oY2kwOiA8VGV4YXMgSW5z dHJ1bWVudHMgVFNCNDNBQjIyL0E+IG1lbSAweGNmZGZmMDAwLTB4Y2ZkZmY3ZmYsMHhjZmRmNDAw MC0weGNmZGY3ZmZmIGlycSAxOSBhdCBkZXZpY2UgNy4wIG9uIHBjaTIKZndvaGNpMDogW0lUSFJF QURdCmZ3b2hjaTA6IE9IQ0kgdmVyc2lvbiAxLjEwIChST009MCkKZndvaGNpMDogTm8uIG9mIElz b2Nocm9ub3VzIGNoYW5uZWxzIGlzIDQuCmZ3b2hjaTA6IEVVSTY0IDBkOjRhOjllOjIxOjAwOjA0 OjRiOjAzCmZ3b2hjaTA6IFBoeSAxMzk0YSBhdmFpbGFibGUgUzQwMCwgMiBwb3J0cy4KZndvaGNp MDogTGluayBTNDAwLCBtYXhfcmVjIDIwNDggYnl0ZXMuCmZpcmV3aXJlMDogPElFRUUxMzk0KEZp cmVXaXJlKSBidXM+IG9uIGZ3b2hjaTAKZndlMDogPEV0aGVybmV0IG92ZXIgRmlyZVdpcmU+IG9u IGZpcmV3aXJlMAppZl9md2UwOiBGYWtlIEV0aGVybmV0IGFkZHJlc3M6IDBlOjRhOjllOjA0OjRi OjAzCmZ3ZTA6IEV0aGVybmV0IGFkZHJlc3M6IDBlOjRhOjllOjA0OjRiOjAzCmZ3ZTA6IGlmX3N0 YXJ0IHJ1bm5pbmcgZGVmZXJyZWQgZm9yIEdpYW50CnNicDA6IDxTQlAtMi9TQ1NJIG92ZXIgRmly ZVdpcmU+IG9uIGZpcmV3aXJlMApmd29oY2kwOiBJbml0aWF0ZSBidXMgcmVzZXQKZndvaGNpMDog bm9kZV9pZD0weGM4MDBmZmMxLCBnZW49MSwgQ1lDTEVNQVNURVIgbW9kZQpmaXJld2lyZTA6IDIg bm9kZXMsIG1heGhvcCA8PSAxLCBjYWJsZSBJUk0gPSAxIChtZSkKZmlyZXdpcmUwOiBidXMgbWFu YWdlciAxIChtZSkKYXRhcGNpNDogPFByb21pc2UgUERDMjAyNjggVURNQTEwMCBjb250cm9sbGVy PiBwb3J0IDB4OGMwMC0weDhjMDcsMHg4ODAwLTB4ODgwMywweDg0MDAtMHg4NDA3LDB4ODAwMC0w eDgwMDMsMHg3YzAwLTB4N2MwZiBtZW0gMHhjZmRmODAwMC0weGNmZGZiZmZmIGlycSAxNyBhdCBk ZXZpY2UgOS4wIG9uIHBjaTIKYXRhcGNpNDogW0lUSFJFQURdCmF0YTg6IDxBVEEgY2hhbm5lbCAw PiBvbiBhdGFwY2k0CmF0YTg6IFtJVEhSRUFEXQphdGE5OiA8QVRBIGNoYW5uZWwgMT4gb24gYXRh cGNpNAphdGE5OiBbSVRIUkVBRF0KYWhjMDogPEFkYXB0ZWMgMTkxNjBCIFVsdHJhMTYwIFNDU0kg YWRhcHRlcj4gcG9ydCAweDc4MDAtMHg3OGZmIG1lbSAweGNmZGZlMDAwLTB4Y2ZkZmVmZmYgaXJx IDE4IGF0IGRldmljZSAxMC4wIG9uIHBjaTIKYWhjMDogW0dJQU5ULUxPQ0tFRF0KYWhjMDogW0lU SFJFQURdCmFpYzc4OTI6IFVsdHJhMTYwIFdpZGUgQ2hhbm5lbCBBLCBTQ1NJIElkPTcsIDMyLzI1 MyBTQ0JzCnBjbTA6IDxOVmlkaWEgTUNQNTUgSGlnaCBEZWZpbml0aW9uIEF1ZGlvIENvbnRyb2xs ZXI+IG1lbSAweGNmZmYwMDAwLTB4Y2ZmZjNmZmYgaXJxIDIxIGF0IGRldmljZSAxNS4xIG9uIHBj aTAKcGNtMDogW0lUSFJFQURdCnBjaTA6IDxicmlkZ2U+IGF0IGRldmljZSAxNy4wIChubyBkcml2 ZXIgYXR0YWNoZWQpCnBjaTA6IDxicmlkZ2U+IGF0IGRldmljZSAxOC4wIChubyBkcml2ZXIgYXR0 YWNoZWQpCmFjcGlfdHowOiA8VGhlcm1hbCBab25lPiBvbiBhY3BpMApzcGVha2VyMDogPFBDIHNw ZWFrZXI+IHBvcnQgMHg2MSBvbiBhY3BpMApzaW8wOiA8MTY1NTBBLWNvbXBhdGlibGUgQ09NIHBv cnQ+IHBvcnQgMHgzZjgtMHgzZmYgaXJxIDQgZmxhZ3MgMHgxMCBvbiBhY3BpMApzaW8wOiB0eXBl IDE2NTUwQQpzaW8wOiBbRklMVEVSXQphdGtiZGMwOiA8S2V5Ym9hcmQgY29udHJvbGxlciAoaTgw NDIpPiBwb3J0IDB4NjAsMHg2NCBpcnEgMSBvbiBhY3BpMAphdGtiZDA6IDxBVCBLZXlib2FyZD4g aXJxIDEgb24gYXRrYmRjMAprYmQwIGF0IGF0a2JkMAphdGtiZDA6IFtHSUFOVC1MT0NLRURdCmF0 a2JkMDogW0lUSFJFQURdCnBtdGltZXIwIG9uIGlzYTAKb3JtMDogPElTQSBPcHRpb24gUk9Ncz4g YXQgaW9tZW0gMHhkMDAwMC0weGQzZmZmLDB4ZDQwMDAtMHhkNTdmZiwweGRkMDAwLTB4ZGVmZmYg cG5waWQgT1JNMDAwMCBvbiBpc2EwCnBwYzA6IHBhcmFsbGVsIHBvcnQgbm90IGZvdW5kLgpzYzA6 IDxTeXN0ZW0gY29uc29sZT4gYXQgZmxhZ3MgMHgxMDAgb24gaXNhMApzYzA6IFZHQSA8MTYgdmly dHVhbCBjb25zb2xlcywgZmxhZ3M9MHgzMDA+CnNpbzE6IGNvbmZpZ3VyZWQgaXJxIDMgbm90IGlu IGJpdG1hcCBvZiBwcm9iZWQgaXJxcyAwCnNpbzE6IHBvcnQgbWF5IG5vdCBiZSBlbmFibGVkCnZn YTA6IDxHZW5lcmljIElTQSBWR0E+IGF0IHBvcnQgMHgzYzAtMHgzZGYgaW9tZW0gMHhhMDAwMC0w eGJmZmZmIG9uIGlzYTAKdWNvbTA6IDxGVERJIFVTQiA8LT4gU2VyaWFsLCBjbGFzcyAwLzAsIHJl diAxLjEwLzQuMDAsIGFkZHIgMj4gb24gdWh1YjAKdWNvbTA6IEZUREkgVVNCIDwtPiBTZXJpYWws IHJldiAxLjEwLzQuMDAsIGFkZHIgMgp1bXMwOiA8TG9naXRlY2ggVVNCLVBTLzIgT3B0aWNhbCBN b3VzZSwgY2xhc3MgMC8wLCByZXYgMi4wMC8xMS4xMCwgYWRkciAzPiBvbiB1aHViMAp1bXMwOiAz IGJ1dHRvbnMgYW5kIFogZGlyLgpUaW1lY291bnRlcnMgdGljayBldmVyeSAxLjAwMCBtc2VjCldh aXRpbmcgNSBzZWNvbmRzIGZvciBTQ1NJIGRldmljZXMgdG8gc2V0dGxlCmFkMDogNzYzMTlNQiA8 U2VhZ2F0ZSBTVDM4MDAxM0EgOC4wMT4gYXQgYXRhMC1tYXN0ZXIgVURNQTEwMAphY2QwOiBEVkRS T00gPFBpb25lZXIgRFZELVJPTSBBVEFQSU1vZGVsIERWRC0xMTYgMDEyMi9FMS4yMj4gYXQgYXRh MC1zbGF2ZSBVRE1BNjYKYWQ0OiAxOTQ0ODFNQiA8TWF4dG9yIDZZMjAwTTAgWUFSNTFFVzA+IGF0 IGF0YTItbWFzdGVyIFNBVEExNTAKYWQ2OiAxOTQ0ODFNQiA8TWF4dG9yIDZZMjAwTTAgWUFSNTFF VzA+IGF0IGF0YTMtbWFzdGVyIFNBVEExNTAKR0VPTV9MQUJFTDogTGFiZWwgZm9yIHByb3ZpZGVy IGFkMHMxIGlzIG50ZnMvRXVyZWthLgphZDE2OiA1NzI1OU1CIDxNQVhUT1IgNkwwNjBKMyBBOTMu MDUwMD4gYXQgYXRhOC1tYXN0ZXIgVURNQTEwMAphY2QxOiBDRFJXIDxTT05ZIENELVJXIENSWDIx NUUxL1NZUzI+IGF0IGF0YTktbWFzdGVyIFVETUEzMwpwY20wOiA8SERBIENvZGVjOiBSZWFsdGVr IChVbmtub3duKT4KcGNtMDogPEhEQSBEcml2ZXIgUmV2aXNpb246IDIwMDcwMzE3XzAwNDI+CmZp cmV3aXJlMDogTmV3IFM0MDAgZGV2aWNlIElEOjAwMDE5OTAwMDAwOTE4MzgKR0VPTV9MQUJFTDog TGFiZWwgZm9yIHByb3ZpZGVyIGFjZDAgaXMgaXNvOTY2MC9HUkFXLgpHRU9NX0xBQkVMOiBMYWJl bCBmb3IgcHJvdmlkZXIgYWNkMSBpcyBpc285NjYwL05XTjJfRElTQzEuCkdFT01fTEFCRUw6IExh YmVsIGZvciBwcm92aWRlciBhZDE2czEgaXMgbnRmcy9ORUlBLgpHRU9NX0xBQkVMOiBMYWJlbCBm b3IgcHJvdmlkZXIgYWQxNnM1IGlzIG1zZG9zZnMvTUFZVS4KYXIwOiAzODg5NjFNQiA8RnJlZUJT RCBQc2V1ZG9SQUlEIFJBSUQwIChzdHJpcGUgOCBLQik+IHN0YXR1czogUkVBRFkKYXIwOiBkaXNr MCBSRUFEWSB1c2luZyBhZDQgYXQgYXRhMi1tYXN0ZXIKYXIwOiBkaXNrMSBSRUFEWSB1c2luZyBh ZDYgYXQgYXRhMy1tYXN0ZXIKU01QOiBBUCBDUFUgIzEgTGF1bmNoZWQhCmRhMCBhdCBhaGMwIGJ1 cyAwIHRhcmdldCA4IGx1biAwCmRhMDogPEhJVEFDSEkgSFVTMTAzMDczRkwzNjAwIFNBMTk+IEZp eGVkIERpcmVjdCBBY2Nlc3MgU0NTSS0zIGRldmljZSAKZGEwOiAxNjAuMDAwTUIvcyB0cmFuc2Zl cnMgKDgwLjAwME1IeiBEVCwgb2Zmc2V0IDgwLCAxNmJpdCkKZGEwOiBDb21tYW5kIFF1ZXVlaW5n IEVuYWJsZWQKZGEwOiA3MDAwN01CICgxNDMzNzQ4MDUgNTEyIGJ5dGUgc2VjdG9yczogMjU1SCA2 M1MvVCA4OTI0QykKVHJ5aW5nIHRvIG1vdW50IHJvb3QgZnJvbSB1ZnM6L2Rldi9kYTBzMWEKV0FS TklORzogLyB3YXMgbm90IHByb3Blcmx5IGRpc21vdW50ZWQKV0FSTklORzogL3ZhciB3YXMgbm90 IHByb3Blcmx5IGRpc21vdW50ZWQKV0FSTklORzogL3VzciB3YXMgbm90IHByb3Blcmx5IGRpc21v dW50ZWQKL3VzcjogbW91bnQgcGVuZGluZyBlcnJvcjogYmxvY2tzIDM2IGZpbGVzIDkKV0FSTklO RzogL2RhdGEgd2FzIG5vdCBwcm9wZXJseSBkaXNtb3VudGVkCg== ------_=_NextPart_001_01C76A3A.164B907F-- From owner-freebsd-acpi@FreeBSD.ORG Mon Mar 19 16:44:28 2007 Return-Path: X-Original-To: acpi@freebsd.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id CDA4916A501; Mon, 19 Mar 2007 16:44:28 +0000 (UTC) (envelope-from rea-fbsd@codelabs.ru) Received: from pobox.codelabs.ru (pobox.codelabs.ru [144.206.177.45]) by mx1.freebsd.org (Postfix) with ESMTP id 6270113C4B7; Mon, 19 Mar 2007 16:44:28 +0000 (UTC) (envelope-from rea-fbsd@codelabs.ru) Received: from codelabs.ru (pobox.codelabs.ru [144.206.177.45]) by pobox.codelabs.ru with esmtpsa (TLSv1:AES256-SHA:256) id 1HTKlS-000PFH-3z; Mon, 19 Mar 2007 19:31:19 +0300 Date: Mon, 19 Mar 2007 19:31:13 +0300 From: Eygene Ryabinkin To: Jung-uk Kim Message-ID: <20070319163113.GB96806@codelabs.ru> References: <200703161256.23996.jkim@FreeBSD.org> <53B52415C756A84E8A169F0E3673A32925FF83@IMCSRV6.MITRE.ORG> MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="H1spWtNR+x+ondvy" Content-Disposition: inline In-Reply-To: <53B52415C756A84E8A169F0E3673A32925FF83@IMCSRV6.MITRE.ORG> Sender: rea-fbsd@codelabs.ru X-Spam-Status: No, score=-2.1 required=4.0 tests=ALL_TRUSTED,AWL,BAYES_50 Cc: acpi@freebsd.org, current@freebsd.org Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 19 Mar 2007 16:44:28 -0000 --H1spWtNR+x+ondvy Content-Type: text/plain; charset=koi8-r Content-Disposition: inline Jung-uk, good day. > >I will import ACPI-CA 20070126 from Intel some time next week. > >Current mega-patch against -CURRENT is here: > > > >http://people.freebsd.org/~jkim/acpica-import-20070126.diff.gz > > > >(Note: Sorry, I had to gzip(1) it because it was too big.) > > > >This patch should fix many ACPI issues in -CURRENT (ACPI-CA 20051021), > > >most notably memory leak. Full change log for ACPI-CA from the last > >import is here: > > > >http://people.freebsd.org/~jkim/acpica_changes_20051021_20070126.txt > > > >I believe it is quite stable because I have been using this patch on > >my primary desktop and laptop for a while and it was tested on amd64, > >i386, and ia64. However, since the patch is huge, I may have missed > >something. If you find something wrong, please let me know before it > >is too late. ;-) On my Asus A2000D laptop the ACPI patch brought one regression: the backlight control buttons are stopped to do their job. Before the patch they used to work, but with some "delay": to actually increase the brightness of the screen I used to press the "increase brightness" button once and then push five or six times any other F-button (volume up/down, mute, change VGA source or the brightness control button) to get the brightness go up. So I got the feeling of some queue that was pushed by the pressing of additional buttons. But now the brightness controls are just stopped to work. The dmesg is attached. -- Eygene --H1spWtNR+x+ondvy Content-Type: text/plain; charset=koi8-r Content-Disposition: attachment; filename=1 Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT #2: Mon Mar 19 15:20:08 MSK 2007 root@XXX:/usr/obj/usr/src/sys/XXX Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: mobile AMD Athlon(tm) XP-M 3000+ (2200.09-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0 Features=0x383f9ff AMD Features=0xc0480800 real memory = 2147287040 (2047 MB) avail memory = 2096197632 (1999 MB) acpi0: on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 cpu0: on acpi0 powernow0: on cpu0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: on hostb0 pcib1: at device 1.0 on pci0 pci1: on pcib1 vgapci0: port 0xd000-0xd0ff mem 0xc0000000-0xc7ffffff,0xfeaf0000-0xfeafffff irq 10 at device 0.0 on pci1 drm0: on vgapci0 info: [drm] AGP at 0xd0000000 64MB info: [drm] Initialized radeon 1.25.0 20060524 isab0: at device 2.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.5 on pci0 ata0: on atapci0 ata0: [ITHREAD] ata1: on atapci0 ata1: [ITHREAD] pci0: at device 2.6 (no driver attached) pcm0: port 0xe800-0xe8ff,0xec00-0xec7f irq 4 at device 2.7 on pci0 pcm0: [ITHREAD] pcm0: ohci0: mem 0xfebfd000-0xfebfdfff irq 15 at device 3.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub0: on usb0 uhub0: 3 ports with 3 removable, self powered ohci1: mem 0xfebfe000-0xfebfefff irq 15 at device 3.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: on ohci1 usb1: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub1: on usb1 uhub1: 3 ports with 3 removable, self powered ehci0: mem 0xfebff000-0xfebfffff irq 15 at device 3.3 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 3 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: on usb2 uhub2: 6 ports with 6 removable, self powered sis0: port 0xee00-0xeeff mem 0xfebfc000-0xfebfcfff irq 10 at device 4.0 on pci0 miibus0: on sis0 rlphy0: PHY 1 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:0e:a6:cf:de:63 sis0: [ITHREAD] cbb0: irq 10 at device 10.0 on pci0 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [ITHREAD] fwohci0: mem 0xfebfb800-0xfebfbfff irq 10 at device 10.1 on pci0 fwohci0: [ITHREAD] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:e0:18:00:03:1a:48:5c fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) iwi0: mem 0xfebfa000-0xfebfafff irq 10 at device 12.0 on pci0 iwi0: using obsoleted if_watchdog interface iwi0: Ethernet address: 00:0e:35:fb:21:42 iwi0: [ITHREAD] acpi_button0: on acpi0 acpi_lid0: on acpi0 acpi_button1: on acpi0 acpi_asus0: on acpi0 acpi_tz0: on acpi0 battery0: on acpi0 acpi_acad0: on acpi0 speaker0: port 0x61 on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Synaptics Touchpad, device ID 0 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] pmtimer0 on isa0 orm0: at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2200090834 Hz quality 800 Timecounters tick every 1.000 msec ad0: 114473MB at ata0-master UDMA100 acd0: CDRW at ata0-slave UDMA33 Trying to mount root from ufs:/dev/ad0s4a --H1spWtNR+x+ondvy-- From owner-freebsd-acpi@FreeBSD.ORG Mon Mar 19 18:15:09 2007 Return-Path: X-Original-To: freebsd-acpi@FreeBSD.org Delivered-To: freebsd-acpi@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 50DD816A408; Mon, 19 Mar 2007 18:15:09 +0000 (UTC) (envelope-from jkim@FreeBSD.org) Received: from anuket.mj.niksun.com (gwnew.niksun.com [65.115.46.162]) by mx1.freebsd.org (Postfix) with ESMTP id EABD513C45B; Mon, 19 Mar 2007 18:15:08 +0000 (UTC) (envelope-from jkim@FreeBSD.org) Received: from niksun.com (anuket [10.70.0.5]) by anuket.mj.niksun.com (8.13.6/8.13.6) with ESMTP id l2JIF5tK021950; Mon, 19 Mar 2007 14:15:05 -0400 (EDT) (envelope-from jkim@FreeBSD.org) From: Jung-uk Kim To: Patrick Tracanelli Date: Mon, 19 Mar 2007 14:14:56 -0400 User-Agent: KMail/1.6.2 References: <200703161256.23996.jkim@FreeBSD.org> <20070316224222.GD1926@haakonia.hitnet.RWTH-Aachen.DE> <45FEA516.1050103@freebsdbrasil.com.br> In-Reply-To: <45FEA516.1050103@freebsdbrasil.com.br> MIME-Version: 1.0 Content-Disposition: inline Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <200703191414.58325.jkim@FreeBSD.org> X-Virus-Scanned: ClamAV 0.88.6/2873/Mon Mar 19 13:46:10 2007 on anuket.mj.niksun.com X-Virus-Status: Clean Cc: freebsd-acpi@FreeBSD.org, freebsd-current@FreeBSD.org Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 19 Mar 2007 18:15:09 -0000 On Monday 19 March 2007 10:58 am, Patrick Tracanelli wrote: > Is it 3.0(a) revision? ACPI-CA should support ACPI 3.0b spec. but we (FreeBSD) do not use much of the features. Jung-uk Kim From owner-freebsd-acpi@FreeBSD.ORG Mon Mar 19 18:22:01 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 6FCDE16A402; Mon, 19 Mar 2007 18:22:01 +0000 (UTC) (envelope-from robert.moore@intel.com) Received: from mga09.intel.com (mga09.intel.com [134.134.136.24]) by mx1.freebsd.org (Postfix) with ESMTP id D5F1213C448; Mon, 19 Mar 2007 18:22:00 +0000 (UTC) (envelope-from robert.moore@intel.com) Received: from fmsmga002.fm.intel.com ([10.253.24.26]) by mga09.intel.com with ESMTP; 19 Mar 2007 11:22:00 -0700 Received: from orsmsx335.jf.intel.com ([10.22.226.40]) by fmsmga002.fm.intel.com with ESMTP; 19 Mar 2007 11:21:59 -0700 X-ExtLoop1: 1 X-IronPort-AV: i="4.14,301,1170662400"; d="scan'208"; a="60655503:sNHT19947618" Received: from orsmsx415.amr.corp.intel.com ([10.22.226.49]) by orsmsx335.jf.intel.com with Microsoft SMTPSVC(6.0.3790.1830); Mon, 19 Mar 2007 11:21:34 -0700 X-MimeOLE: Produced By Microsoft Exchange V6.5 Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Date: Mon, 19 Mar 2007 11:21:33 -0700 Message-ID: In-Reply-To: <200703191414.58325.jkim@FreeBSD.org> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: [HEADSUP] ACPI-CA 20070126 import thread-index: AcdqUuT62ZUa9MoMQMmG0DMeaoj0PwAAGl4w From: "Moore, Robert" To: "Jung-uk Kim" , "Patrick Tracanelli" X-OriginalArrivalTime: 19 Mar 2007 18:21:34.0837 (UTC) FILETIME=[6D168250:01C76A53] Cc: freebsd-acpi@FreeBSD.org, freebsd-current@FreeBSD.org Subject: RE: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 19 Mar 2007 18:22:01 -0000 ACPICA "officially" supports ACPI 3.0a. We have deployed most of the changes for ACPI 3.0b (minor), but we are not quite finished. Bob > -----Original Message----- > From: owner-freebsd-acpi@freebsd.org [mailto:owner-freebsd- > acpi@freebsd.org] On Behalf Of Jung-uk Kim > Sent: Monday, March 19, 2007 11:15 AM > To: Patrick Tracanelli > Cc: freebsd-acpi@FreeBSD.org; freebsd-current@FreeBSD.org > Subject: Re: [HEADSUP] ACPI-CA 20070126 import >=20 > On Monday 19 March 2007 10:58 am, Patrick Tracanelli wrote: > > Is it 3.0(a) revision? >=20 > ACPI-CA should support ACPI 3.0b spec. but we (FreeBSD) do not use > much of the features. >=20 > Jung-uk Kim > _______________________________________________ > freebsd-acpi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-acpi > To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org" From owner-freebsd-acpi@FreeBSD.ORG Mon Mar 19 19:39:38 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id BB93516A412 for ; Mon, 19 Mar 2007 19:39:38 +0000 (UTC) (envelope-from nate@root.org) Received: from root.org (root.org [67.118.192.226]) by mx1.freebsd.org (Postfix) with ESMTP id A00D013C4F3 for ; Mon, 19 Mar 2007 19:39:38 +0000 (UTC) (envelope-from nate@root.org) Received: (qmail 67119 invoked from network); 19 Mar 2007 16:44:26 -0000 Received: from ppp-71-139-35-160.dsl.snfc21.pacbell.net (HELO ?10.0.0.235?) (nate-mail@71.139.35.160) by root.org with ESMTPA; 19 Mar 2007 16:44:26 -0000 Message-ID: <45FEBDDF.1070709@root.org> Date: Mon, 19 Mar 2007 09:44:15 -0700 From: Nate Lawson User-Agent: Thunderbird 1.5.0.7 (X11/20061027) MIME-Version: 1.0 To: David Schulz References: <499c70c0703180359h47f304caqb367a3121ffd674f@mail.gmail.com> <512771AC-926E-4B9E-A6AE-35292AE08919@tca-cable-connector.com> <45FD837D.1080402@root.org> <82206769-500E-437A-B982-D411140101E6@tca-cable-connector.com> In-Reply-To: <82206769-500E-437A-B982-D411140101E6@tca-cable-connector.com> X-Enigmail-Version: 0.94.1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: freebsd-acpi@freebsd.org Subject: Re: Compaq Presario V3000 X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 19 Mar 2007 19:39:38 -0000 Three things to try: 1. Disable burst mode by setting debug.acpi.ec.burst="0" in loader.conf. If that doesn't help, try adding debug.acpi.ec.timeout="1000" to loader.conf 2. If that doesn't help, enable the code in the #if 0 segment. (Just delete the #if 0 and #endif lines and recompile). 3. 1 & 2 together. -Nate David Schulz wrote: > I downloaded and applied this patch without any errors. when booting up > i manually loaded the new acpi.ko, but once finished booting i still get > the exact same messages. > > On Mar 19, 2007, at 2:22 AM, Nate Lawson wrote: > >>> On Mar 18, 2007, at 6:59 PM, Abdullah Ibn Hamad Al-Marri wrote: >>> >>>> On 3/18/07, David Schulz wrote: >>>>> Hello all, >>>>> >>>>> i have a Compaq Presario V3000. After installing FreeBSD i am getting >>>>> these type of Messages to my Log. >>>>> >>>>> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned >>>>> AE_NO_HARDWARE_RESPONSE >>>>> ACPI-1304: *** Error: Method execution failed [\ >>>>> \_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE >>>>> ACPI-1304: *** Error: Method execution failed [\ >>>>> \_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60), >>>>> AE_NO_HARDWARE_RESPONSE >>>>> >>>>> I have attached my full dmesg output in dmesg.txt. >>>>> >>>>> Is there any way of resolving this? Basically, these Messages >>>>> continue to appear at maybe 30 second interval. >>>>> >>>>> Thanks a lot, >>>>> David >>>> >>>> Hello, >>>> >>>> You may need to check [HEADSUP] ACPI-CA 20070126 import thread. >>> >>> So this means there is a patch out somewhere that could fix this? could >>> i apply that patch to 6.2 ? >>> >>> Thanks, >>> David >>> >> >> I recently committed a major reworking of the embedded controller >> driver in -current. See this message: >> >> http://lists.freebsd.org/pipermail/freebsd-current/2007-February/069525.html >> >> >> It includes a patch to try for 6.x. You may need to tweak the various >> parameters, again, see the message. >> From owner-freebsd-acpi@FreeBSD.ORG Mon Mar 19 22:14:51 2007 Return-Path: X-Original-To: freebsd-acpi@FreeBSD.org Delivered-To: freebsd-acpi@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id E577D16A402 for ; Mon, 19 Mar 2007 22:14:51 +0000 (UTC) (envelope-from nate@root.org) Received: from root.org (root.org [67.118.192.226]) by mx1.freebsd.org (Postfix) with ESMTP id B541B13C468 for ; Mon, 19 Mar 2007 22:14:51 +0000 (UTC) (envelope-from nate@root.org) Received: (qmail 81007 invoked from network); 19 Mar 2007 18:29:40 -0000 Received: from ppp-71-139-35-160.dsl.snfc21.pacbell.net (HELO ?10.0.0.235?) (nate-mail@71.139.35.160) by root.org with ESMTPA; 19 Mar 2007 18:29:40 -0000 Message-ID: <45FED68E.50901@root.org> Date: Mon, 19 Mar 2007 11:29:34 -0700 From: Nate Lawson User-Agent: Thunderbird 1.5.0.7 (X11/20061027) MIME-Version: 1.0 To: Jung-uk Kim References: <200703161256.23996.jkim@FreeBSD.org> <20070316224222.GD1926@haakonia.hitnet.RWTH-Aachen.DE> <45FEA516.1050103@freebsdbrasil.com.br> <200703191414.58325.jkim@FreeBSD.org> In-Reply-To: <200703191414.58325.jkim@FreeBSD.org> X-Enigmail-Version: 0.94.1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: Patrick Tracanelli , freebsd-acpi@FreeBSD.org, freebsd-current@FreeBSD.org Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 19 Mar 2007 22:14:52 -0000 Jung-uk Kim wrote: > On Monday 19 March 2007 10:58 am, Patrick Tracanelli wrote: >> Is it 3.0(a) revision? > > ACPI-CA should support ACPI 3.0b spec. but we (FreeBSD) do not use > much of the features. One misconception a lot of people have is that acpi is like a piece of hardware that has a driver. So they think the driver should support version 3.0b or whatever. acpi is more like an API to your BIOS/hardware that many other drivers use. We "support" version 3.0b in that if drivers want to use it, that information is available. But the actual support in terms of enabling features still requires a lot more work. For example, hotplug cpus. Nothing needs to be done in acpi to support them. But FreeBSD needs a driver for hotplug cpus, architecture changes to help migrate threads off a cpu before shutting it down, etc. -- Nate From owner-freebsd-acpi@FreeBSD.ORG Mon Mar 19 23:43:38 2007 Return-Path: X-Original-To: acpi@freebsd.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id E43F316A401 for ; Mon, 19 Mar 2007 23:43:38 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from server.baldwin.cx (66-23-211-162.clients.speedfactory.net [66.23.211.162]) by mx1.freebsd.org (Postfix) with ESMTP id 9DFB013C4C1 for ; Mon, 19 Mar 2007 23:43:38 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from localhost.corp.yahoo.com (john@localhost [127.0.0.1]) (authenticated bits=0) by server.baldwin.cx (8.13.8/8.13.8) with ESMTP id l2JN5nbH033971 for ; Mon, 19 Mar 2007 18:05:49 -0500 (EST) (envelope-from jhb@freebsd.org) From: John Baldwin To: acpi@freebsd.org Date: Mon, 19 Mar 2007 17:26:29 -0400 User-Agent: KMail/1.9.6 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200703191726.30337.jhb@freebsd.org> X-Greylist: Sender succeeded SMTP AUTH authentication, not delayed by milter-greylist-2.0.2 (server.baldwin.cx [127.0.0.1]); Mon, 19 Mar 2007 18:05:49 -0500 (EST) X-Virus-Scanned: ClamAV 0.88.3/2875/Mon Mar 19 14:51:01 2007 on server.baldwin.cx X-Virus-Status: Clean X-Spam-Status: No, score=-4.4 required=4.2 tests=ALL_TRUSTED,BAYES_00 autolearn=ham version=3.1.3 X-Spam-Checker-Version: SpamAssassin 3.1.3 (2006-06-01) on server.baldwin.cx Cc: Subject: acpi_acad(4) stopped working X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 19 Mar 2007 23:43:39 -0000 I updated my laptop this weekend to the latest current (previous OS was from around May 20, 2006) and some things now seem to work nicely. One regression I've noticed though is that acpi_acad0 no longer "notices" when the power plug is pulled or re-inserted. I do know that this worked fine on the old kernel. Anyone have any ideas off the top of their head before I dig into this deeper? -- John Baldwin From owner-freebsd-acpi@FreeBSD.ORG Tue Mar 20 00:43:30 2007 Return-Path: X-Original-To: acpi@freebsd.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id AFC4916A403 for ; Tue, 20 Mar 2007 00:43:30 +0000 (UTC) (envelope-from nate@root.org) Received: from root.org (root.org [67.118.192.226]) by mx1.freebsd.org (Postfix) with ESMTP id 9782F13C45B for ; Tue, 20 Mar 2007 00:43:30 +0000 (UTC) (envelope-from nate@root.org) Received: (qmail 98589 invoked from network); 19 Mar 2007 20:46:37 -0000 Received: from ppp-71-139-35-160.dsl.snfc21.pacbell.net (HELO ?10.0.0.235?) (nate-mail@71.139.35.160) by root.org with ESMTPA; 19 Mar 2007 20:46:37 -0000 Message-ID: <45FEF6A6.30209@root.org> Date: Mon, 19 Mar 2007 13:46:30 -0700 From: Nate Lawson User-Agent: Thunderbird 1.5.0.7 (X11/20061027) MIME-Version: 1.0 To: Eygene Ryabinkin References: <200703161256.23996.jkim@FreeBSD.org> <53B52415C756A84E8A169F0E3673A32925FF83@IMCSRV6.MITRE.ORG> <20070319163113.GB96806@codelabs.ru> In-Reply-To: <20070319163113.GB96806@codelabs.ru> X-Enigmail-Version: 0.94.1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: acpi@freebsd.org, current@freebsd.org, Jung-uk Kim Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Mar 2007 00:43:30 -0000 Eygene Ryabinkin wrote: > Jung-uk, good day. > >>> I will import ACPI-CA 20070126 from Intel some time next week. >>> Current mega-patch against -CURRENT is here: >>> >>> http://people.freebsd.org/~jkim/acpica-import-20070126.diff.gz >>> >>> (Note: Sorry, I had to gzip(1) it because it was too big.) >>> >>> This patch should fix many ACPI issues in -CURRENT (ACPI-CA 20051021), >>> most notably memory leak. Full change log for ACPI-CA from the last >>> import is here: >>> >>> http://people.freebsd.org/~jkim/acpica_changes_20051021_20070126.txt >>> >>> I believe it is quite stable because I have been using this patch on >>> my primary desktop and laptop for a while and it was tested on amd64, >>> i386, and ia64. However, since the patch is huge, I may have missed >>> something. If you find something wrong, please let me know before it >>> is too late. ;-) > > On my Asus A2000D laptop the ACPI patch brought one regression: > the backlight control buttons are stopped to do their job. Before > the patch they used to work, but with some "delay": to actually > increase the brightness of the screen I used to press the "increase > brightness" button once and then push five or six times any other > F-button (volume up/down, mute, change VGA source or the brightness > control button) to get the brightness go up. So I got the feeling > of some queue that was pushed by the pressing of additional buttons. > But now the brightness controls are just stopped to work. I think it's not the acpi-ca patch, it's the recent acpi_ec.c change. Try it with rev 1.68 of that file. -- Nate From owner-freebsd-acpi@FreeBSD.ORG Tue Mar 20 04:07:33 2007 Return-Path: X-Original-To: acpi@freebsd.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 8904116A400 for ; Tue, 20 Mar 2007 04:07:33 +0000 (UTC) (envelope-from nate@root.org) Received: from root.org (root.org [67.118.192.226]) by mx1.freebsd.org (Postfix) with ESMTP id 5368413C4B7 for ; Tue, 20 Mar 2007 04:07:33 +0000 (UTC) (envelope-from nate@root.org) Received: (qmail 31508 invoked from network); 20 Mar 2007 00:39:38 -0000 Received: from ppp-71-139-35-160.dsl.snfc21.pacbell.net (HELO ?10.0.0.235?) (nate-mail@71.139.35.160) by root.org with ESMTPA; 20 Mar 2007 00:39:38 -0000 Message-ID: <45FF2D42.2010305@root.org> Date: Mon, 19 Mar 2007 17:39:30 -0700 From: Nate Lawson User-Agent: Thunderbird 1.5.0.7 (X11/20061027) MIME-Version: 1.0 To: John Baldwin References: <200703191726.30337.jhb@freebsd.org> In-Reply-To: <200703191726.30337.jhb@freebsd.org> X-Enigmail-Version: 0.94.1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: acpi@freebsd.org Subject: Re: acpi_acad(4) stopped working X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Mar 2007 04:07:33 -0000 John Baldwin wrote: > I updated my laptop this weekend to the latest current (previous OS was from > around May 20, 2006) and some things now seem to work nicely. One regression > I've noticed though is that acpi_acad0 no longer "notices" when the power > plug is pulled or re-inserted. I do know that this worked fine on the old > kernel. Anyone have any ideas off the top of their head before I dig into > this deeper? > The acpi_ec.c updates, since the EC is used on most systems to get battery, thermal, and AC line status. Try the items I mentioned in the headsup email: http://lists.freebsd.org/pipermail/freebsd-current/2007-February/069525.html -- Nate From owner-freebsd-acpi@FreeBSD.ORG Tue Mar 20 04:20:55 2007 Return-Path: X-Original-To: acpi@freebsd.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id D482D16A402 for ; Tue, 20 Mar 2007 04:20:55 +0000 (UTC) (envelope-from nate@root.org) Received: from root.org (root.org [67.118.192.226]) by mx1.freebsd.org (Postfix) with ESMTP id B688713C458 for ; Tue, 20 Mar 2007 04:20:55 +0000 (UTC) (envelope-from nate@root.org) Received: (qmail 33663 invoked from network); 20 Mar 2007 00:58:49 -0000 Received: from ppp-71-139-35-160.dsl.snfc21.pacbell.net (HELO ?10.0.0.235?) (nate-mail@71.139.35.160) by root.org with ESMTPA; 20 Mar 2007 00:58:49 -0000 Message-ID: <45FF31C2.1040107@root.org> Date: Mon, 19 Mar 2007 17:58:42 -0700 From: Nate Lawson User-Agent: Thunderbird 1.5.0.7 (X11/20061027) MIME-Version: 1.0 To: Rong-en Fan References: <6eb82e0703161009w15787d99p51510299fa0e1e45@mail.gmail.com> <1174078831.829.11.camel@RabbitsDen> <6eb82e0703170100v572a0794q334dc34bec992685@mail.gmail.com> <20070317170959.f48f5bf6.taku@tackymt.homeip.net> <6eb82e0703170210t3d4be248w64b7cf9981880bbe@mail.gmail.com> <20070319025520.69486e29.taku@tackymt.homeip.net> <6eb82e0703181159vcd095f9k4d65a8b3231c1bf@mail.gmail.com> In-Reply-To: <6eb82e0703181159vcd095f9k4d65a8b3231c1bf@mail.gmail.com> X-Enigmail-Version: 0.94.1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: acpi@freebsd.org, Alexandre Sunny Kovalenko , freebsd-mobile@freebsd.org Subject: Re: ThinkPad x60 and FN keys X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Mar 2007 04:20:55 -0000 Rong-en Fan wrote: > On 3/19/07, Taku YAMAMOTO wrote: >> On Sat, 17 Mar 2007 17:10:38 +0800 >> "Rong-en Fan" wrote: >> >> > Tested with newer acpica (available on acpi@). Without acpi_video, >> > brightness control (FN+Home, End) works. Bluetooth control >> > (fn+f5) works and the dev.acpi_ibm.0.bluetooth seems not flip flop. >> > FN+F7 still not work. >> > >> > With acpi_video, brightness control does not work. >> > >> > Thank you. >> > >> > Regards, >> > Rong-En Fan >> >> Fine. >> It's expected that brightness hotkeys aren't functional with >> acpi_video on >> recent ThinkPads because their BIOS stop handling of the brightness and >> rely on OS once acpi_video gets involved. >> >> The acpi_video module should of cource be enhanced to handle these >> brightness events defined in ACPI 3.0 spec. If I would have some spare >> time... > > Thank you. In the mean time, could we get the patch committed? > (I'm CC'ing Nate Lawson) > > BTW, if I understand you correctly, when acpi_video is loaded, fn+home/end > will generate some events to acpi_video, but our acpi_video does not handle > these events so the brightness are not adjusted? Is that right? > > Regards, > Rong-En Fan > > == > > --- acpi_ec.c-1.69 Tue Feb 27 09:14:20 2007 > +++ sys/dev/acpica/acpi_ec.c Tue Feb 27 14:39:52 2007 > @@ -825,6 +825,11 @@ EcGpeHandler(void *Context) > CTR1(KTR_ACPI, "ec event was IBE/OBF, status %#x", EcStatus); > sc->ec_csrvalue = EcStatus; > wakeup(&sc->ec_csrvalue); > + if (!sc->ec_sci_pend) { > + Status = AcpiEnableGpe(sc->ec_gpehandle, sc->ec_gpebit, ACPI_ISR); > + if (ACPI_FAILURE(Status)) > + printf("EcGpeHandler: AcpiEnableEvent failed\n"); > + } > } else if (!sc->ec_sci_pend) { > /* SCI bit set and no pending query handler, so schedule one. */ > CTR0(KTR_ACPI, "ec queueing gpe handler"); Crap, that is a bug. In the path where the event was an SCI, we now no longer re-enable the GPE. Thanks for pointing this out. I've committed a fix in rev 1.71. See if it helps. -- Nate From owner-freebsd-acpi@FreeBSD.ORG Tue Mar 20 04:23:06 2007 Return-Path: X-Original-To: acpi@freebsd.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id E06C716A401 for ; Tue, 20 Mar 2007 04:23:06 +0000 (UTC) (envelope-from nate@root.org) Received: from root.org (root.org [67.118.192.226]) by mx1.freebsd.org (Postfix) with ESMTP id C3FC213C4C1 for ; Tue, 20 Mar 2007 04:23:06 +0000 (UTC) (envelope-from nate@root.org) Received: (qmail 33970 invoked from network); 20 Mar 2007 01:00:49 -0000 Received: from ppp-71-139-35-160.dsl.snfc21.pacbell.net (HELO ?10.0.0.235?) (nate-mail@71.139.35.160) by root.org with ESMTPA; 20 Mar 2007 01:00:49 -0000 Message-ID: <45FF3239.7080808@root.org> Date: Mon, 19 Mar 2007 18:00:41 -0700 From: Nate Lawson User-Agent: Thunderbird 1.5.0.7 (X11/20061027) MIME-Version: 1.0 To: Eygene Ryabinkin References: <200703161256.23996.jkim@FreeBSD.org> <53B52415C756A84E8A169F0E3673A32925FF83@IMCSRV6.MITRE.ORG> <20070319163113.GB96806@codelabs.ru> <45FEF6A6.30209@root.org> In-Reply-To: <45FEF6A6.30209@root.org> X-Enigmail-Version: 0.94.1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: acpi@freebsd.org, current@freebsd.org, Jung-uk Kim Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Mar 2007 04:23:07 -0000 Nate Lawson wrote: > Eygene Ryabinkin wrote: >> Jung-uk, good day. >> >>>> I will import ACPI-CA 20070126 from Intel some time next week. >>>> Current mega-patch against -CURRENT is here: >>>> >>>> http://people.freebsd.org/~jkim/acpica-import-20070126.diff.gz >>>> >>>> (Note: Sorry, I had to gzip(1) it because it was too big.) >>>> >>>> This patch should fix many ACPI issues in -CURRENT (ACPI-CA 20051021), >>>> most notably memory leak. Full change log for ACPI-CA from the last >>>> import is here: >>>> >>>> http://people.freebsd.org/~jkim/acpica_changes_20051021_20070126.txt >>>> >>>> I believe it is quite stable because I have been using this patch on >>>> my primary desktop and laptop for a while and it was tested on amd64, >>>> i386, and ia64. However, since the patch is huge, I may have missed >>>> something. If you find something wrong, please let me know before it >>>> is too late. ;-) >> On my Asus A2000D laptop the ACPI patch brought one regression: >> the backlight control buttons are stopped to do their job. Before >> the patch they used to work, but with some "delay": to actually >> increase the brightness of the screen I used to press the "increase >> brightness" button once and then push five or six times any other >> F-button (volume up/down, mute, change VGA source or the brightness >> control button) to get the brightness go up. So I got the feeling >> of some queue that was pushed by the pressing of additional buttons. >> But now the brightness controls are just stopped to work. > > I think it's not the acpi-ca patch, it's the recent acpi_ec.c change. > Try it with rev 1.68 of that file. > Or better, try with rev 1.71 that I just committed. Fixed a bug where we weren't re-enabling the GPE, which could cause exactly this issue. -- Nate From owner-freebsd-acpi@FreeBSD.ORG Tue Mar 20 04:52:48 2007 Return-Path: X-Original-To: acpi@freebsd.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 061B516A400 for ; Tue, 20 Mar 2007 04:52:48 +0000 (UTC) (envelope-from grafan@gmail.com) Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.175]) by mx1.freebsd.org (Postfix) with ESMTP id 8B0DF13C465 for ; Tue, 20 Mar 2007 04:52:47 +0000 (UTC) (envelope-from grafan@gmail.com) Received: by ug-out-1314.google.com with SMTP id 71so1480549ugh for ; Mon, 19 Mar 2007 21:52:46 -0700 (PDT) DKIM-Signature: a=rsa-sha1; c=relaxed/relaxed; d=gmail.com; s=beta; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=HblR8AnhpviZYgxGeWwyUj9b7rYZ5nH8PlT6f9M1iChDogDnXCv4UZcslmx92SgJxoK6NGqn4YemkjdLG1pCh8zspVZxYCZS4ZOvbuhpY9lM93WmhUKiWR4ofHFRuM4/Mkas5DcuSgsKwHY/nzsJRB3iDqbRd3wMX/jAMVeOAQQ= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=jh+Yh1JeZdVCBcRbdTeC11XIXmKxGhJoWDuGnJNBqq6wyfe+CopDDmm52mSEp7K8bhFuvq/3l9vYIY+wezHOG7M8CSVEKw4dWjpnoUx8FqpGMQXXDUtNB9u+Eso7q0wXmqIGEh+j8uVmvRxDTzQprJZlLQLjN0LBsa3Jf3rup1Q= Received: by 10.65.122.20 with SMTP id z20mr10567983qbm.1174364788666; Mon, 19 Mar 2007 21:26:28 -0700 (PDT) Received: by 10.140.23.10 with HTTP; Mon, 19 Mar 2007 21:26:28 -0700 (PDT) Message-ID: <6eb82e0703192126y41dd2c49n8522f58cacccdfa9@mail.gmail.com> Date: Tue, 20 Mar 2007 12:26:28 +0800 From: "Rong-en Fan" To: "Nate Lawson" In-Reply-To: <45FF31C2.1040107@root.org> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <6eb82e0703161009w15787d99p51510299fa0e1e45@mail.gmail.com> <1174078831.829.11.camel@RabbitsDen> <6eb82e0703170100v572a0794q334dc34bec992685@mail.gmail.com> <20070317170959.f48f5bf6.taku@tackymt.homeip.net> <6eb82e0703170210t3d4be248w64b7cf9981880bbe@mail.gmail.com> <20070319025520.69486e29.taku@tackymt.homeip.net> <6eb82e0703181159vcd095f9k4d65a8b3231c1bf@mail.gmail.com> <45FF31C2.1040107@root.org> Cc: acpi@freebsd.org, Alexandre Sunny Kovalenko , freebsd-mobile@freebsd.org Subject: Re: ThinkPad x60 and FN keys X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Mar 2007 04:52:48 -0000 On 3/20/07, Nate Lawson wrote: > Rong-en Fan wrote: > > On 3/19/07, Taku YAMAMOTO wrote: > >> On Sat, 17 Mar 2007 17:10:38 +0800 > >> Fine. > >> It's expected that brightness hotkeys aren't functional with > >> acpi_video on > >> recent ThinkPads because their BIOS stop handling of the brightness and > >> rely on OS once acpi_video gets involved. > >> > >> The acpi_video module should of cource be enhanced to handle these > >> brightness events defined in ACPI 3.0 spec. If I would have some spare > >> time... > > > > Thank you. In the mean time, could we get the patch committed? > > (I'm CC'ing Nate Lawson) > > > > BTW, if I understand you correctly, when acpi_video is loaded, fn+home/end > > will generate some events to acpi_video, but our acpi_video does not handle > > these events so the brightness are not adjusted? Is that right? > > > > Regards, > > Rong-En Fan > > > > == > > > > --- acpi_ec.c-1.69 Tue Feb 27 09:14:20 2007 > > +++ sys/dev/acpica/acpi_ec.c Tue Feb 27 14:39:52 2007 > > @@ -825,6 +825,11 @@ EcGpeHandler(void *Context) > > CTR1(KTR_ACPI, "ec event was IBE/OBF, status %#x", EcStatus); > > sc->ec_csrvalue = EcStatus; > > wakeup(&sc->ec_csrvalue); > > + if (!sc->ec_sci_pend) { > > + Status = AcpiEnableGpe(sc->ec_gpehandle, sc->ec_gpebit, ACPI_ISR); > > + if (ACPI_FAILURE(Status)) > > + printf("EcGpeHandler: AcpiEnableEvent failed\n"); > > + } > > } else if (!sc->ec_sci_pend) { > > /* SCI bit set and no pending query handler, so schedule one. */ > > CTR0(KTR_ACPI, "ec queueing gpe handler"); > > Crap, that is a bug. In the path where the event was an SCI, we now no > longer re-enable the GPE. Thanks for pointing this out. > > I've committed a fix in rev 1.71. See if it helps. Yes. It works. Thank you! Regards, Rong-En Fan From owner-freebsd-acpi@FreeBSD.ORG Tue Mar 20 06:54:44 2007 Return-Path: X-Original-To: acpi@freebsd.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id DA5CE16A402 for ; Tue, 20 Mar 2007 06:54:44 +0000 (UTC) (envelope-from nate@root.org) Received: from root.org (root.org [67.118.192.226]) by mx1.freebsd.org (Postfix) with ESMTP id A943213C455 for ; Tue, 20 Mar 2007 06:54:44 +0000 (UTC) (envelope-from nate@root.org) Received: (qmail 59963 invoked from network); 20 Mar 2007 04:28:20 -0000 Received: from ppp-71-139-35-160.dsl.snfc21.pacbell.net (HELO ?10.0.0.235?) (nate-mail@71.139.35.160) by root.org with ESMTPA; 20 Mar 2007 04:28:20 -0000 Message-ID: <45FF62DB.8030405@root.org> Date: Mon, 19 Mar 2007 21:28:11 -0700 From: Nate Lawson User-Agent: Thunderbird 1.5.0.7 (X11/20061027) MIME-Version: 1.0 To: John Baldwin References: <200703191726.30337.jhb@freebsd.org> <45FF2D42.2010305@root.org> In-Reply-To: <45FF2D42.2010305@root.org> X-Enigmail-Version: 0.94.1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: acpi@freebsd.org Subject: Re: acpi_acad(4) stopped working X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Mar 2007 06:54:44 -0000 Nate Lawson wrote: > John Baldwin wrote: >> I updated my laptop this weekend to the latest current (previous OS was from >> around May 20, 2006) and some things now seem to work nicely. One regression >> I've noticed though is that acpi_acad0 no longer "notices" when the power >> plug is pulled or re-inserted. I do know that this worked fine on the old >> kernel. Anyone have any ideas off the top of their head before I dig into >> this deeper? >> > > The acpi_ec.c updates, since the EC is used on most systems to get > battery, thermal, and AC line status. Try the items I mentioned in the > headsup email: > > http://lists.freebsd.org/pipermail/freebsd-current/2007-February/069525.html > Also, first cvsup to rev 1.71 of acpi_ec.c and see if that alone helps. -- Nate From owner-freebsd-acpi@FreeBSD.ORG Tue Mar 20 07:06:18 2007 Return-Path: X-Original-To: acpi@freebsd.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 593E516A401; Tue, 20 Mar 2007 07:06:18 +0000 (UTC) (envelope-from rea-fbsd@codelabs.ru) Received: from pobox.codelabs.ru (pobox.codelabs.ru [144.206.177.45]) by mx1.freebsd.org (Postfix) with ESMTP id 0BF6C13C459; Tue, 20 Mar 2007 07:06:17 +0000 (UTC) (envelope-from rea-fbsd@codelabs.ru) Received: from codelabs.ru (pobox.codelabs.ru [144.206.177.45]) by pobox.codelabs.ru with esmtpsa (TLSv1:AES256-SHA:256) id 1HTYQB-0001Tp-MK; Tue, 20 Mar 2007 10:06:16 +0300 Date: Tue, 20 Mar 2007 10:06:11 +0300 From: Eygene Ryabinkin To: Jung-uk Kim , Nate Lawson Message-ID: <20070320070610.GE96806@codelabs.ru> References: <200703161256.23996.jkim@FreeBSD.org> <53B52415C756A84E8A169F0E3673A32925FF83@IMCSRV6.MITRE.ORG> <20070319163113.GB96806@codelabs.ru> <45FEF6A6.30209@root.org> <45FF3239.7080808@root.org> <200703161256.23996.jkim@FreeBSD.org> <20070319163113.GB96806@codelabs.ru> <200703191535.27842.jkim@FreeBSD.org> <200703191538.32383.jkim@FreeBSD.org> MIME-Version: 1.0 Content-Type: text/plain; charset=koi8-r Content-Disposition: inline In-Reply-To: <45FF3239.7080808@root.org> <200703191538.32383.jkim@FreeBSD.org> Sender: rea-fbsd@codelabs.ru X-Spam-Status: No, score=-3.4 required=4.0 tests=ALL_TRUSTED,AWL,BAYES_00 Cc: acpi@freebsd.org, current@freebsd.org Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Mar 2007 07:06:18 -0000 Jung-uk, Nate, good day. Mon, Mar 19, 2007 at 06:00:41PM -0700, Nate Lawson wrote: > > > I think it's not the acpi-ca patch, it's the recent acpi_ec.c change. > > Try it with rev 1.68 of that file. > > > > Or better, try with rev 1.71 that I just committed. Fixed a bug where > we weren't re-enabling the GPE, which could cause exactly this issue. Nate, you're completely right: I've applied the 1.70 -> 1.71 patch on top of the Jung-uk's one and it enabled the backlight controls to work again. But the "queued" behaviour were still there. Mon, Mar 19, 2007 at 03:38:30PM -0400, Jung-uk Kim wrote: > > As a quick test, can you try this? > > --- src/sys/dev/acpica/Osd/OsdSchedule.c > +++ src/sys/dev/acpica/Osd/OsdSchedule.c > pri = 5; > break; > case OSL_NOTIFY_HANDLER: > - pri = 3; > + pri = 15; > break; > case OSL_DEBUGGER_THREAD: > pri = 0; Jung-uk, and this change enabled the backlignt to go up or down after the second press of any F-button, so the "event queue" length got down to one. Again, your patch was applied to the yesterday's clean FreeBSD HEAD and the Nate's one for the acpi_ec.c 1.70 -> 1.71 was applied on top of it. > BTW, it is not really a patch, i.e., I just typed it in. :-) All I > want you to test is to change 3 -> 15. > > I hope I didn't confuse you. No, you're not confused me at all -- I am doing such "patches" almost regularily ;)) Thank you both for your response and work! -- Eygene From owner-freebsd-acpi@FreeBSD.ORG Tue Mar 20 08:36:49 2007 Return-Path: X-Original-To: acpi@freebsd.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 9C07716A400; Tue, 20 Mar 2007 08:36:49 +0000 (UTC) (envelope-from rea-fbsd@codelabs.ru) Received: from pobox.codelabs.ru (pobox.codelabs.ru [144.206.177.45]) by mx1.freebsd.org (Postfix) with ESMTP id 5380113C44B; Tue, 20 Mar 2007 08:36:49 +0000 (UTC) (envelope-from rea-fbsd@codelabs.ru) Received: from codelabs.ru (pobox.codelabs.ru [144.206.177.45]) by pobox.codelabs.ru with esmtpsa (TLSv1:AES256-SHA:256) id 1HTZpj-0001ZP-To; Tue, 20 Mar 2007 11:36:44 +0300 Date: Tue, 20 Mar 2007 11:36:35 +0300 From: Eygene Ryabinkin To: Jung-uk Kim , Nate Lawson Message-ID: <20070320083634.GM96806@codelabs.ru> References: <200703161256.23996.jkim@FreeBSD.org> <53B52415C756A84E8A169F0E3673A32925FF83@IMCSRV6.MITRE.ORG> <20070319163113.GB96806@codelabs.ru> <45FEF6A6.30209@root.org> <45FF3239.7080808@root.org> <200703161256.23996.jkim@FreeBSD.org> <20070319163113.GB96806@codelabs.ru> <200703191535.27842.jkim@FreeBSD.org> <200703191538.32383.jkim@FreeBSD.org> <20070320070610.GE96806@codelabs.ru> MIME-Version: 1.0 Content-Type: text/plain; charset=koi8-r Content-Disposition: inline In-Reply-To: <20070320070610.GE96806@codelabs.ru> Sender: rea-fbsd@codelabs.ru X-Spam-Status: No, score=-2.1 required=4.0 tests=ALL_TRUSTED,AWL,BAYES_50 Cc: acpi@freebsd.org, current@freebsd.org Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Mar 2007 08:36:49 -0000 Me again. Tue, Mar 20, 2007 at 10:06:11AM +0300, Eygene Ryabinkin wrote: > > Jung-uk, and this change enabled the backlignt to go up or down > after the second press of any F-button, so the "event queue" length > got down to one. Again, your patch was applied to the yesterday's > clean FreeBSD HEAD and the Nate's one for the acpi_ec.c 1.70 -> > 1.71 was applied on top of it. After some two hours were passed from the notebook boot time the backlight controls are got their previous behaviour: I need to press the F-buttons about 5 or 6 times to get the backlight to up or down. Something enlarged the "event queue". Rebooted the notebook: the previour behaviour (one extra press needed) is restored. -- Eygene From owner-freebsd-acpi@FreeBSD.ORG Tue Mar 20 11:04:23 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id C4E9D16A400 for ; Tue, 20 Mar 2007 11:04:23 +0000 (UTC) (envelope-from alexander@leidinger.net) Received: from redbull.bpaserver.net (redbullneu.bpaserver.net [213.198.78.217]) by mx1.freebsd.org (Postfix) with ESMTP id 3C47E13C45B for ; Tue, 20 Mar 2007 11:04:23 +0000 (UTC) (envelope-from alexander@leidinger.net) Received: from outgoing.leidinger.net (p54A5FBC6.dip.t-dialin.net [84.165.251.198]) by redbull.bpaserver.net (Postfix) with ESMTP id 7DA9E2E1A2; Tue, 20 Mar 2007 11:44:13 +0100 (CET) Received: from webmail.leidinger.net (webmail.Leidinger.net [192.168.1.102]) by outgoing.leidinger.net (Postfix) with ESMTP id 55E645B4817; Tue, 20 Mar 2007 11:44:10 +0100 (CET) Received: (from www@localhost) by webmail.leidinger.net (8.13.8/8.13.8/Submit) id l2KAi9SP008795; Tue, 20 Mar 2007 11:44:09 +0100 (CET) (envelope-from Alexander@Leidinger.net) Received: from pslux.cec.eu.int (pslux.cec.eu.int [158.169.9.14]) by webmail.leidinger.net (Horde MIME library) with HTTP; Tue, 20 Mar 2007 11:44:09 +0100 Message-ID: <20070320114409.8bxlnfmgsg8cokck@webmail.leidinger.net> X-Priority: 3 (Normal) Date: Tue, 20 Mar 2007 11:44:09 +0100 From: Alexander Leidinger To: Nate Lawson References: <200703161256.23996.jkim@FreeBSD.org> <20070316224222.GD1926@haakonia.hitnet.RWTH-Aachen.DE> <45FEA516.1050103@freebsdbrasil.com.br> <200703191414.58325.jkim@FreeBSD.org> <45FED68E.50901@root.org> In-Reply-To: <45FED68E.50901@root.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8; DelSp="Yes"; format="flowed" Content-Disposition: inline Content-Transfer-Encoding: quoted-printable User-Agent: Internet Messaging Program (IMP) H3 (4.1.3) / FreeBSD-7.0 X-BPAnet-MailScanner-Information: Please contact the ISP for more information X-BPAnet-MailScanner: Found to be clean X-BPAnet-MailScanner-SpamCheck: not spam, SpamAssassin (not cached, score=-14.364, required 8, BAYES_00 -15.00, DK_POLICY_SIGNSOME 0.00, FORGED_RCVD_HELO 0.14, VOWEL_TOCC_5 0.50) X-BPAnet-MailScanner-From: alexander@leidinger.net X-Spam-Status: No Cc: Patrick Tracanelli , freebsd-acpi@FreeBSD.org, freebsd-current@FreeBSD.org, Jung-uk Kim Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Mar 2007 11:04:23 -0000 Quoting Nate Lawson (from Mon, 19 Mar 2007 11:29:34 -0700): > acpi is more like an API to your BIOS/hardware that many other drivers > use. We "support" version 3.0b in that if drivers want to use it, that > information is available. But the actual support in terms of enabling > features still requires a lot more work. > > For example, hotplug cpus. Nothing needs to be done in acpi to support > them. But FreeBSD needs a driver for hotplug cpus, architecture changes > to help migrate threads off a cpu before shutting it down, etc. Could you write some sentences for the ideas list? I'm thinking of =20 something like "our ACPI code has support for the following stuff but =20 FreeBSD does not make use of it: ". I know it is a lot of =20 work to come up with such a list, but we already got some nice =20 improvements because of entries in our ideas list. Bye, Alexander. --=20 A box without hinges, key, or lid, Yet golden treasure inside is hid. =09=09-- J. R. R. Tolkien http://www.Leidinger.net Alexander @ Leidinger.net: PGP ID =3D B0063FE7 http://www.FreeBSD.org netchild @ FreeBSD.org : PGP ID =3D 72077137 From owner-freebsd-acpi@FreeBSD.ORG Tue Mar 20 22:07:52 2007 Return-Path: X-Original-To: acpi@freebsd.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 92B0016A403 for ; Tue, 20 Mar 2007 22:07:52 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from server.baldwin.cx (66-23-211-162.clients.speedfactory.net [66.23.211.162]) by mx1.freebsd.org (Postfix) with ESMTP id 806FE13C4C9 for ; Tue, 20 Mar 2007 22:07:51 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from localhost.corp.yahoo.com (john@localhost [127.0.0.1]) (authenticated bits=0) by server.baldwin.cx (8.13.8/8.13.8) with ESMTP id l2KM7mV9046249; Tue, 20 Mar 2007 17:07:48 -0500 (EST) (envelope-from jhb@freebsd.org) From: John Baldwin To: Nate Lawson Date: Tue, 20 Mar 2007 12:23:43 -0400 User-Agent: KMail/1.9.6 References: <200703191726.30337.jhb@freebsd.org> <45FF2D42.2010305@root.org> <45FF62DB.8030405@root.org> In-Reply-To: <45FF62DB.8030405@root.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200703201223.44836.jhb@freebsd.org> X-Greylist: Sender succeeded SMTP AUTH authentication, not delayed by milter-greylist-2.0.2 (server.baldwin.cx [127.0.0.1]); Tue, 20 Mar 2007 17:07:48 -0500 (EST) X-Virus-Scanned: ClamAV 0.88.3/2881/Tue Mar 20 14:53:24 2007 on server.baldwin.cx X-Virus-Status: Clean X-Spam-Status: No, score=-4.2 required=4.2 tests=ALL_TRUSTED,AWL,BAYES_00, DATE_IN_PAST_03_06 autolearn=ham version=3.1.3 X-Spam-Checker-Version: SpamAssassin 3.1.3 (2006-06-01) on server.baldwin.cx Cc: acpi@freebsd.org Subject: Re: acpi_acad(4) stopped working X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Mar 2007 22:07:52 -0000 On Tuesday 20 March 2007 12:28:11 am Nate Lawson wrote: > Nate Lawson wrote: > > John Baldwin wrote: > >> I updated my laptop this weekend to the latest current (previous OS was from > >> around May 20, 2006) and some things now seem to work nicely. One regression > >> I've noticed though is that acpi_acad0 no longer "notices" when the power > >> plug is pulled or re-inserted. I do know that this worked fine on the old > >> kernel. Anyone have any ideas off the top of their head before I dig into > >> this deeper? > >> > > > > The acpi_ec.c updates, since the EC is used on most systems to get > > battery, thermal, and AC line status. Try the items I mentioned in the > > headsup email: > > > > http://lists.freebsd.org/pipermail/freebsd-current/2007-February/069525.html > > > > Also, first cvsup to rev 1.71 of acpi_ec.c and see if that alone helps. That fixed it, thanks! I had just noticed that I wasn't getting any interrupts on acpi0 and that battery reporting had also stopped updating after boot when I got your e-mail. -- John Baldwin From owner-freebsd-acpi@FreeBSD.ORG Wed Mar 21 05:50:29 2007 Return-Path: X-Original-To: acpi@freebsd.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 20D8616A403; Wed, 21 Mar 2007 05:50:29 +0000 (UTC) (envelope-from chris@hitnet.RWTH-Aachen.DE) Received: from mta-1.ms.rz.rwth-aachen.de (mta-1.ms.rz.RWTH-Aachen.DE [134.130.7.72]) by mx1.freebsd.org (Postfix) with ESMTP id C393513C45A; Wed, 21 Mar 2007 05:50:28 +0000 (UTC) (envelope-from chris@hitnet.RWTH-Aachen.DE) Received: from circe ([134.130.3.36]) by mta-1.ms.rz.RWTH-Aachen.de (Sun Java System Messaging Server 6.2-7.05 (built Sep 5 2006)) with ESMTP id <0JF8007QHO83YD60@mta-1.ms.rz.RWTH-Aachen.de>; Wed, 21 Mar 2007 06:50:27 +0100 (CET) Received: from talos.rz.RWTH-Aachen.DE ([134.130.3.22]) by circe (MailMonitor for SMTP v1.2.2 ) ; Wed, 21 Mar 2007 06:50:27 +0100 (MET) Received: from bigboss.hitnet.rwth-aachen.de (bigspace.hitnet.RWTH-Aachen.DE [137.226.181.2]) by smarthost.rwth-aachen.de (8.13.8/8.13.1/1) with ESMTP id l2L5oQLp017738; Wed, 21 Mar 2007 06:50:26 +0100 Received: from haakonia.hitnet.rwth-aachen.de ([137.226.181.92]) by bigboss.hitnet.rwth-aachen.de with esmtps (TLS-1.0:DHE_RSA_AES_256_CBC_SHA:32) (Exim 4.50) id 1HTtiN-0003ms-BG; Wed, 21 Mar 2007 06:50:27 +0100 Received: by haakonia.hitnet.rwth-aachen.de (Postfix, from userid 1001) id EC7633F429; Wed, 21 Mar 2007 06:50:26 +0100 (CET) Date: Wed, 21 Mar 2007 06:50:26 +0100 From: Christian Brueffer In-reply-to: <45FF3239.7080808@root.org> To: Nate Lawson Message-id: <20070321055026.GA1936@haakonia.hitnet.RWTH-Aachen.DE> MIME-version: 1.0 Content-type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary=a8Wt8u1KmwUX3Y2C Content-disposition: inline X-Operating-System: FreeBSD 6.2-STABLE X-PGP-Key: http://people.FreeBSD.org/~brueffer/brueffer.key.asc X-PGP-Fingerprint: A5C8 2099 19FF AACA F41B B29B 6C76 178C A0ED 982D References: <200703161256.23996.jkim@FreeBSD.org> <53B52415C756A84E8A169F0E3673A32925FF83@IMCSRV6.MITRE.ORG> <20070319163113.GB96806@codelabs.ru> <45FEF6A6.30209@root.org> <45FF3239.7080808@root.org> User-Agent: Mutt/1.5.11 Cc: acpi@freebsd.org, Eygene Ryabinkin , current@freebsd.org, Jung-uk Kim Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 21 Mar 2007 05:50:29 -0000 --a8Wt8u1KmwUX3Y2C Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Mon, Mar 19, 2007 at 06:00:41PM -0700, Nate Lawson wrote: > Nate Lawson wrote: > > Eygene Ryabinkin wrote: > >> Jung-uk, good day. > >> > >>>> I will import ACPI-CA 20070126 from Intel some time next week. =20 > >>>> Current mega-patch against -CURRENT is here: > >>>> > >>>> http://people.freebsd.org/~jkim/acpica-import-20070126.diff.gz > >>>> > >>>> (Note: Sorry, I had to gzip(1) it because it was too big.) > >>>> > >>>> This patch should fix many ACPI issues in -CURRENT (ACPI-CA 20051021= ), > >>>> most notably memory leak. Full change log for ACPI-CA from the last= =20 > >>>> import is here: > >>>> > >>>> http://people.freebsd.org/~jkim/acpica_changes_20051021_20070126.txt > >>>> > >>>> I believe it is quite stable because I have been using this patch on= =20 > >>>> my primary desktop and laptop for a while and it was tested on amd64= ,=20 > >>>> i386, and ia64. However, since the patch is huge, I may have missed= =20 > >>>> something. If you find something wrong, please let me know before i= t=20 > >>>> is too late. ;-) > >> On my Asus A2000D laptop the ACPI patch brought one regression: > >> the backlight control buttons are stopped to do their job. Before > >> the patch they used to work, but with some "delay": to actually > >> increase the brightness of the screen I used to press the "increase > >> brightness" button once and then push five or six times any other > >> F-button (volume up/down, mute, change VGA source or the brightness > >> control button) to get the brightness go up. So I got the feeling > >> of some queue that was pushed by the pressing of additional buttons. > >> But now the brightness controls are just stopped to work. > >=20 > > I think it's not the acpi-ca patch, it's the recent acpi_ec.c change. > > Try it with rev 1.68 of that file. > >=20 >=20 > Or better, try with rev 1.71 that I just committed. Fixed a bug where > we weren't re-enabling the GPE, which could cause exactly this issue. >=20 After your fixes, my fn button to enable bluetooth works again. Thanks! - Christian --=20 Christian Brueffer chris@unixpages.org brueffer@FreeBSD.org GPG Key: http://people.freebsd.org/~brueffer/brueffer.key.asc GPG Fingerprint: A5C8 2099 19FF AACA F41B B29B 6C76 178C A0ED 982D --a8Wt8u1KmwUX3Y2C Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (FreeBSD) iD8DBQFGAMeibHYXjKDtmC0RAi4QAJ4zCqTzba5CZjAUD7sb9sb0EM6JgQCeJsXe DzK3BJMk3iem4DYXAp07mPM= =FsYa -----END PGP SIGNATURE----- --a8Wt8u1KmwUX3Y2C-- From owner-freebsd-acpi@FreeBSD.ORG Wed Mar 21 22:00:54 2007 Return-Path: X-Original-To: freebsd-acpi@FreeBSD.org Delivered-To: freebsd-acpi@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 7056A16A4D8; Wed, 21 Mar 2007 22:00:54 +0000 (UTC) (envelope-from jkim@FreeBSD.org) Received: from anuket.mj.niksun.com (gwnew.niksun.com [65.115.46.162]) by mx1.freebsd.org (Postfix) with ESMTP id 314BE13C465; Wed, 21 Mar 2007 22:00:53 +0000 (UTC) (envelope-from jkim@FreeBSD.org) Received: from niksun.com (anuket [10.70.0.5]) by anuket.mj.niksun.com (8.13.6/8.13.6) with ESMTP id l2LM0qih079740; Wed, 21 Mar 2007 18:00:53 -0400 (EDT) (envelope-from jkim@FreeBSD.org) From: Jung-uk Kim To: freebsd-acpi@FreeBSD.org Date: Wed, 21 Mar 2007 18:00:26 -0400 User-Agent: KMail/1.6.2 References: <200703161256.23996.jkim@FreeBSD.org> In-Reply-To: <200703161256.23996.jkim@FreeBSD.org> MIME-Version: 1.0 Content-Disposition: inline Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <200703211800.50287.jkim@FreeBSD.org> X-Virus-Scanned: ClamAV 0.88.6/2893/Wed Mar 21 15:48:02 2007 on anuket.mj.niksun.com X-Virus-Status: Clean Cc: freebsd-current@FreeBSD.org Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 21 Mar 2007 22:00:54 -0000 On Friday 16 March 2007 12:56 pm, Jung-uk Kim wrote: > I will import ACPI-CA 20070126 from Intel some time next week. > Current mega-patch against -CURRENT is here: > > http://people.freebsd.org/~jkim/acpica-import-20070126.diff.gz I updated the patch with the latest ACPI-CA 20070320 release: http://people.freebsd.org/~jkim/acpica-import-20070320.diff.gz Delta from the previous patchset is here: http://people.freebsd.org/~jkim/acpica_changes_20070126_20070320.diff The changes are minor and only internal to ACPI-CA, i.e., no change in FreeBSD code. I will do the actual import tomorrow. You have been warned. ;-) Thanks, Jung-uk Kim From owner-freebsd-acpi@FreeBSD.ORG Thu Mar 22 07:24:02 2007 Return-Path: X-Original-To: acpi@freebsd.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id EF32B16A408; Thu, 22 Mar 2007 07:24:02 +0000 (UTC) (envelope-from bde@zeta.org.au) Received: from mailout1.pacific.net.au (mailout1-3.pacific.net.au [61.8.2.210]) by mx1.freebsd.org (Postfix) with ESMTP id B41EB13C44C; Thu, 22 Mar 2007 07:24:02 +0000 (UTC) (envelope-from bde@zeta.org.au) Received: from mailproxy2.pacific.net.au (mailproxy2.pacific.net.au [61.8.2.163]) by mailout1.pacific.net.au (Postfix) with ESMTP id 611295A1C16; Thu, 22 Mar 2007 18:24:01 +1100 (EST) Received: from besplex.bde.org (katana.zip.com.au [61.8.7.246]) by mailproxy2.pacific.net.au (Postfix) with ESMTP id 5828C27411; Thu, 22 Mar 2007 18:24:00 +1100 (EST) Date: Thu, 22 Mar 2007 18:23:58 +1100 (EST) From: Bruce Evans X-X-Sender: bde@besplex.bde.org To: Nate Lawson In-Reply-To: <45FF3239.7080808@root.org> Message-ID: <20070322182353.H13607@besplex.bde.org> References: <200703161256.23996.jkim@FreeBSD.org> <53B52415C756A84E8A169F0E3673A32925FF83@IMCSRV6.MITRE.ORG> <20070319163113.GB96806@codelabs.ru> <45FEF6A6.30209@root.org> <45FF3239.7080808@root.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Cc: acpi@freebsd.org, Eygene Ryabinkin , current@freebsd.org, Jung-uk Kim Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 22 Mar 2007 07:24:03 -0000 On Mon, 19 Mar 2007, Nate Lawson wrote: > Nate Lawson wrote: >> I think it's not the acpi-ca patch, it's the recent acpi_ec.c change. >> Try it with rev 1.68 of that file. > > Or better, try with rev 1.71 that I just committed. Fixed a bug where > we weren't re-enabling the GPE, which could cause exactly this issue. 1.71 seems to fix ec.burst=1 on HP nx6325. Bruce From owner-freebsd-acpi@FreeBSD.ORG Thu Mar 22 08:50:09 2007 Return-Path: X-Original-To: acpi@freebsd.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 7762516A469; Thu, 22 Mar 2007 08:50:09 +0000 (UTC) (envelope-from bde@zeta.org.au) Received: from mailout2.pacific.net.au (mailout2-3.pacific.net.au [61.8.2.226]) by mx1.freebsd.org (Postfix) with ESMTP id 3D46213C483; Thu, 22 Mar 2007 08:50:09 +0000 (UTC) (envelope-from bde@zeta.org.au) Received: from mailproxy2.pacific.net.au (mailproxy2.pacific.net.au [61.8.2.163]) by mailout2.pacific.net.au (Postfix) with ESMTP id 30BC5109A3A; Thu, 22 Mar 2007 19:50:03 +1100 (EST) Received: from besplex.bde.org (katana.zip.com.au [61.8.7.246]) by mailproxy2.pacific.net.au (Postfix) with ESMTP id 898F927413; Thu, 22 Mar 2007 19:50:06 +1100 (EST) Date: Thu, 22 Mar 2007 19:50:04 +1100 (EST) From: Bruce Evans X-X-Sender: bde@besplex.bde.org To: Nate Lawson In-Reply-To: <20070322182353.H13607@besplex.bde.org> Message-ID: <20070322194527.Q13787@besplex.bde.org> References: <200703161256.23996.jkim@FreeBSD.org> <53B52415C756A84E8A169F0E3673A32925FF83@IMCSRV6.MITRE.ORG> <20070319163113.GB96806@codelabs.ru> <45FEF6A6.30209@root.org> <45FF3239.7080808@root.org> <20070322182353.H13607@besplex.bde.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Cc: acpi@freebsd.org, Eygene Ryabinkin , current@freebsd.org, Jung-uk Kim Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 22 Mar 2007 08:50:09 -0000 On Thu, 22 Mar 2007, Bruce Evans wrote: > On Mon, 19 Mar 2007, Nate Lawson wrote: > >> Nate Lawson wrote: >>> I think it's not the acpi-ca patch, it's the recent acpi_ec.c change. >>> Try it with rev 1.68 of that file. >> >> Or better, try with rev 1.71 that I just committed. Fixed a bug where >> we weren't re-enabling the GPE, which could cause exactly this issue. > > 1.71 seems to fix ec.burst=1 on HP nx6325. Actually, it seems to only fix the problem when the system is idle (or cold?). Building kernels indicates that the problem is still there by printing "acpi_tz2: _TMP value is absurd, ignored (34xx.xC)" message. Then idling stops the message being printed. No other messages are printed about this. Bruce From owner-freebsd-acpi@FreeBSD.ORG Thu Mar 22 15:07:55 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 23ADC16A401 for ; Thu, 22 Mar 2007 15:07:55 +0000 (UTC) (envelope-from chris@vindaloo.com) Received: from corellia.vindaloo.com (corellia.vindaloo.com [64.51.148.100]) by mx1.freebsd.org (Postfix) with ESMTP id 1E7D913C46A for ; Thu, 22 Mar 2007 15:07:54 +0000 (UTC) (envelope-from chris@vindaloo.com) Received: from [172.24.145.69] (endor.vindaloo.com [172.24.145.69]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by corellia.vindaloo.com (Postfix) with ESMTP id 60ABA5CBE; Thu, 22 Mar 2007 10:48:24 -0400 (EDT) Message-ID: <46029737.9070802@vindaloo.com> Date: Thu, 22 Mar 2007 10:48:23 -0400 From: Christopher Hilton User-Agent: Thunderbird 1.5.0.10 (Macintosh/20070221) MIME-Version: 1.0 To: freebsd-acpi@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: ACPI suspend/resume on HP Compaq nc6230 X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 22 Mar 2007 15:07:55 -0000 I'm having a problem getting my HP nc6230 to Suspend/Resume under ACPI on FreeBSD. I've tried 6.1-STABLE, 6.2-RELEASE, and 7.0-CURRENT-200703. I've written about this before and always come up to a dead end. Under 6.1 I got as far as this as pulling messages from the serial console for a suspend/resume cycle. I'd love to get this working and I think that with a little guidance I might be able to. If anyone can lend a hand that would be great. Here's a Console dump of a suspend/resume cycle on 6.1-STABLE. to get this I had to enable comconsoles and log the messages in a terminal emulator. -------- Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-STABLE #1: Wed Aug 30 09:53:34 EDT 2006 chris at dagobah:/usr/src/sys/i386/compile/HP6230 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.86GHz (1862.07-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 Features=0xafe9fbff Features2=0x180 AMD Features=0x100000 real memory = 1073545216 (1023 MB) avail memory = 1041588224 (993 MB) ACPI APIC Table: ACPI: Overriding _OS definition with "Windows 2001" ioapic0: Changing APIC ID to 1 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 cpu0: on acpi0 est0: on cpu0 p4tcc0: on cpu0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: irq 16 at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) pcib2: irq 16 at device 28.0 on pci0 pci16: on pcib2 pci16: at device 0.0 (no driver attached) pcib3: irq 17 at device 28.1 on pci0 pci32: on pcib3 uhci0: port 0x3000-0x301f irq 20 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x3020-0x303f irq 17 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x3040-0x305f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: mem 0xc8500000-0xc85003ff irq 20 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: wrong number of companions (4 != 3) usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 8 ports with 8 removable, self powered pcib4: at device 30.0 on pci0 pci2: on pcib4 pci2: at device 4.0 (no driver attached) cbb0: mem 0xc8101000-0xc8101fff irq 18 at device 6.0 on pci2 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pci2: at device 6.5 (no driver attached) pcm0: port 0x3100-0x31ff,0x3200-0x323f mem 0xc8501000-0xc85011ff,0xc8502000-0xc85020ff irq 21 at device 30.2 on pci0 pcm0: isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3240-0x324f irq 16 at device 31.1 on pci0 ata0: on atapci0 ata1: on atapci0 battery0: on acpi0 battery1: on acpi0 acpi_acad0: on acpi0 acpi_button0: on acpi0 acpi_lid0: on acpi0 acpi_tz0: on acpi0 acpi_tz1: on acpi0 acpi_tz2: on acpi0 acpi_tz3: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 sio0: port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: port 0x3e8-0x3ef,0x100-0x10f irq 3 drq 3 on acpi0 sio1: type 16550A pmtimer0 on isa0 orm0: at iomem 0xc0000-0xcffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1862065314 Hz quality 800 Timecounters tick every 1.000 msec ad0: 57231MB at ata0-master UDMA100 acd0: CDRW at ata0-slave PIO4 Trying to mount root from ufs:/dev/ad0s4a cpu0: Cx states changed bge0: mem 0xc8000000-0xc800ffff irq 16 at device 0.0 on pci16 miibus0: on bge0 brgphy0: on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:15:60:b1:78:ae bge0: link state changed to DOWN bge0: link state changed to UP acpi_video0: port 0x2000-0x20ff mem 0xc0000000-0xc7ffffff,0xc8400000-0xc840ffff irq 16 at device 0.0 on pci1 vga0: failed to save state (nbytes=4) ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ioapic_suspend: not implemented! ACPI-1304: *** Error: Method execution failed [\\_SB_.C002.C0EE] (Node 0xc4aea700), AE_AML_BUFFER_LIMIT ACPI-1304: *** Error: Method execution failed [\\_SB_.C002.C0F3._SRS] (Node 0xc4aed180), AE_AML_BUFFER_LIMIT pci_link7: Unable to route IRQs: AE_AML_BUFFER_LIMIT bge0: PHY read timed out bge0: PHY read timed out bge0: PHY read timed out bge0: PHY read timed out bge0: PHY read timed out bge0: PHY read timed out bge0: PHY read timed out bge0: PHY read timed out bge0: PHY read timed out bge0: PHY read timed out bge0: PHY read timed out bge0: PHY read timed out bge0: PHY read timed out bge0: RX CPU self-diagnostics failed! bge0: flow-through queue init failed bge0: initialization failure wakeup from sleeping state (slept 00:00:27) subdisk0: detached ad0: detached Fatal trap 12: page fault while in kernel mode fault virtual address = 0x3b0 fault code = supervisor read, page not present instruction pointer = 0x20:0xc046ecee stack pointer = 0x28:0xe35aacc8 frame pointer = 0x28:0xe35aacd8 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 2 (g_event) trap number = 12 panic: page fault Uptime: 26m11s Cannot dump. No dump device defined. Automatic reboot in 15 seconds - press a key on the console to abort Rebooting... Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-STABLE #1: Wed Aug 30 09:53:34 EDT 2006 chris at dagobah:/usr/src/sys/i386/compile/HP6230 /* ---- Kernel Config ------------------------------------- */ # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.429.2.11 2006/07/13 08:11:46 delphij Exp $ machine i386 cpu I486_CPU cpu I586_CPU cpu I686_CPU ident HP6230 # To statically compile in device wiring instead of /boot/device.hints # hints "GENERIC.hints" # Default places to look for devices. makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols #options SCHED_ULE # ULE scheduler options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options ADAPTIVE_GIANT # Giant mutex is adaptive. device apic # I/O APIC # Bus support. device eisa device pci # Floppy drives #device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device kbdmux # keyboard multiplexer device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor device agp # support several AGP chipsets # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! ## device miibus # MII bus support ## device bge # Broadcom BCM570xx Gigabit Ethernet # Wireless NIC cards ## device wlan # 802.11 support ## device wlan_wep # 802.11 WEP support ## device wlan_ccmp # 802.11 CCMP support ## device wlan_tkip # 802.11 TKIP support ## device ath # Atheros pci/cardbus NIC's ## device ath_hal # Atheros HAL (Hardware Access Layer) ## device ath_rate_sample # SampleRate tx rate control for ath # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse ## device ural # Ralink Technology RT2500USB wireless NICs device urio # Diamond Rio 500 MP3 player device uscanner # Scanners device uvisor device ucom # USB Ethernet, requires miibus ## device aue # ADMtek USB Ethernet ## device axe # ASIX Electronics USB Ethernet ## device cdce # Generic USB over Ethernet ## device cue # CATC USB Ethernet ## device kue # Kawasaki LSI USB Ethernet ## device rue # RealTek RTL8150 USB Ethernet -- Chris -- __o "All I was doing was trying to get home from work." _`\<,_ -Rosa Parks ___(*)/_(*)___________________________________________________________ Christopher Sean Hilton pgp key: D0957A2D/f5 30 0a e1 55 76 9b 1f 47 0b 07 e9 75 0e 14 From owner-freebsd-acpi@FreeBSD.ORG Thu Mar 22 18:36:57 2007 Return-Path: X-Original-To: freebsd-acpi@FreeBSD.org Delivered-To: freebsd-acpi@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 913BF16A400; Thu, 22 Mar 2007 18:36:57 +0000 (UTC) (envelope-from jkim@FreeBSD.org) Received: from anuket.mj.niksun.com (gwnew.niksun.com [65.115.46.162]) by mx1.freebsd.org (Postfix) with ESMTP id 53BB013C48C; Thu, 22 Mar 2007 18:36:56 +0000 (UTC) (envelope-from jkim@FreeBSD.org) Received: from niksun.com (anuket [10.70.0.5]) by anuket.mj.niksun.com (8.13.6/8.13.6) with ESMTP id l2MIatNT035135; Thu, 22 Mar 2007 14:36:56 -0400 (EDT) (envelope-from jkim@FreeBSD.org) From: Jung-uk Kim To: freebsd-acpi@FreeBSD.org Date: Thu, 22 Mar 2007 14:36:45 -0400 User-Agent: KMail/1.6.2 References: <200703161256.23996.jkim@FreeBSD.org> <200703211800.50287.jkim@FreeBSD.org> In-Reply-To: <200703211800.50287.jkim@FreeBSD.org> MIME-Version: 1.0 Content-Disposition: inline Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <200703221436.53818.jkim@FreeBSD.org> X-Virus-Scanned: ClamAV 0.88.6/2904/Thu Mar 22 07:03:31 2007 on anuket.mj.niksun.com X-Virus-Status: Clean Cc: freebsd-current@FreeBSD.org Subject: Re: [HEADSUP] ACPI-CA 20070126 import X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 22 Mar 2007 18:36:57 -0000 On Wednesday 21 March 2007 06:00 pm, Jung-uk Kim wrote: > On Friday 16 March 2007 12:56 pm, Jung-uk Kim wrote: > > I will import ACPI-CA 20070126 from Intel some time next week. > > Current mega-patch against -CURRENT is here: > > > > http://people.freebsd.org/~jkim/acpica-import-20070126.diff.gz > > I updated the patch with the latest ACPI-CA 20070320 release: > > http://people.freebsd.org/~jkim/acpica-import-20070320.diff.gz > > Delta from the previous patchset is here: > > http://people.freebsd.org/~jkim/acpica_changes_20070126_20070320.di >ff > > The changes are minor and only internal to ACPI-CA, i.e., no change > in FreeBSD code. I will do the actual import tomorrow. You have > been warned. ;-) ACPI-CA 20070320 has finally landed. I'd like to take this opportunity to say thank everyone of you for testing and feedback. And special thanks to njl, jhb, marcel, and sepotvin for your code reviews and patches. Cheers, Jung-uk Kim From owner-freebsd-acpi@FreeBSD.ORG Fri Mar 23 06:43:33 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 97C4416A400 for ; Fri, 23 Mar 2007 06:43:33 +0000 (UTC) (envelope-from alex65536@yandex.ru) Received: from smtp1.yandex.ru (smtp1.yandex.ru [213.180.223.87]) by mx1.freebsd.org (Postfix) with ESMTP id E910C13C4D3 for ; Fri, 23 Mar 2007 06:43:32 +0000 (UTC) (envelope-from alex65536@yandex.ru) Received: from [194.186.193.90] ([194.186.193.90]:1517 "EHLO [192.168.0.100]" smtp-auth: "alex65536" TLS-CIPHER: TLS-PEER-CN1: ) by mail.yandex.ru with ESMTP id S2077450AbXCWGOu (ORCPT ); Fri, 23 Mar 2007 09:14:50 +0300 X-Comment: RFC 2476 MSA function at smtp1.yandex.ru logged sender identity as: alex65536 Date: Fri, 23 Mar 2007 09:14:55 +0300 From: alex65536@yandex.ru X-Mailer: The Bat! (v2.10.03) Personal X-Priority: 3 (Normal) Message-ID: <73519472.20070323091455@yandex.ru> To: freebsd-acpi@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Subject: toshiba portege r100 resumes from S3 after a small patch X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: alex65536@yandex.ru List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 23 Mar 2007 06:43:33 -0000 I've found a way to make my toshiba portege r100 resume. I just edited function ata_resume() in /usr/src/sys/dev/ata/ata-all.c like that: ... int ata_resume(device_t dev) { printf("a delay to be sure disks have started...\n"); DELAY(2000000); // delay for 2 seconds ... } ... Without that delay system crashes sometimes with message "ad0: detached". I think that would work with some other toshiba laptops. A small problem is that the delay occurs two times, for both ata channels, but it's better than nothing. Alexandre Scherbanov From owner-freebsd-acpi@FreeBSD.ORG Fri Mar 23 13:55:30 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 1343516A400 for ; Fri, 23 Mar 2007 13:55:30 +0000 (UTC) (envelope-from msn@paultjuh.org) Received: from pvdl.nl.eu.org (84-245-34-247.dsl.cambrium.nl [84.245.34.247]) by mx1.freebsd.org (Postfix) with ESMTP id 9276B13C44C for ; Fri, 23 Mar 2007 13:55:29 +0000 (UTC) (envelope-from msn@paultjuh.org) Received: from 84.245.34.247 ([84.245.34.247]) (authenticated user msn@paultjuh.org) by pvdl.nl.eu.org (pvdl.nl.eu.org [10.0.0.150]) (MDaemon.PRO.v6.8.5.R) with ESMTP id 45-md50000000003.tmp for ; Fri, 23 Mar 2007 14:44:40 +0100 Message-ID: <4603D9C8.5050807@paultjuh.org> Date: Fri, 23 Mar 2007 14:44:40 +0100 From: Paul van der Linden User-Agent: Thunderbird 1.5.0.10 (Windows/20070221) MIME-Version: 1.0 To: freebsd-acpi@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Authenticated-Sender: msn@paultjuh.org X-Spam-Processed: pvdl.nl.eu.org, Fri, 23 Mar 2007 14:44:40 +0100 (not processed: message from valid local sender) X-MDRemoteIP: 84.245.34.247 X-Return-Path: msn@paultjuh.org X-MDaemon-Deliver-To: freebsd-acpi@freebsd.org Subject: ACPI doesn't work? X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 23 Mar 2007 13:55:30 -0000 Hi, I've just installed a freebsd distribution on a real computer for the first time (I only have run freebsd in vmware). The problem is, that acpi doesn't seem to work. My fans are constantly working on fullspeed, and when I run powerd -v it gives some errors while throttling my cpu: server# powerd -v powerd: cannot read AC line status, using default settings idle time > 90%, decreasing clock speed from 1862 MHz to 1629 MHz powerd: error setting CPU frequency 1629: Device not configured The dmesg.boot gives some errors: acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_throttle1: failed to attach P_CNT Is there some way to fix this, or isn't my motherboard supported? My motherboard is an Asus P5M2-M with Intel 3000 MCH chipset, and I've included the ACPI part of the dmesg.boot: FreeBSD 6.2-RELEASE #0: Fri Jan 12 08:43:30 UTC 2007 root@portnoy.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz (1866.74-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff Features2=0xe3bd,CX16,,> AMD Features=0x20000800 AMD Features2=0x1 Cores per package: 2 real memory = 1073479680 (1023 MB) avail memory = 1023713280 (976 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 acpi_perf0: on cpu0 acpi_throttle0: on cpu0 cpu1: on acpi0 acpi_throttle1: on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: irq 16 at device 28.0 on pci0 pci4: on pcib1 pcib2: irq 16 at device 28.4 on pci0 pci3: on pcib2 From owner-freebsd-acpi@FreeBSD.ORG Fri Mar 23 18:07:41 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 7199416A400 for ; Fri, 23 Mar 2007 18:07:41 +0000 (UTC) (envelope-from nate@root.org) Received: from root.org (root.org [67.118.192.226]) by mx1.freebsd.org (Postfix) with ESMTP id 40F0D13C487 for ; Fri, 23 Mar 2007 18:07:41 +0000 (UTC) (envelope-from nate@root.org) Received: (qmail 47922 invoked from network); 23 Mar 2007 17:31:03 -0000 Received: from ppp-71-139-28-99.dsl.snfc21.pacbell.net (HELO ?10.0.0.235?) (nate-mail@71.139.28.99) by root.org with ESMTPA; 23 Mar 2007 17:31:03 -0000 Message-ID: <46040ED0.3090607@root.org> Date: Fri, 23 Mar 2007 10:30:56 -0700 From: Nate Lawson User-Agent: Thunderbird 1.5.0.7 (X11/20061027) MIME-Version: 1.0 To: alex65536@yandex.ru References: <73519472.20070323091455@yandex.ru> In-Reply-To: <73519472.20070323091455@yandex.ru> X-Enigmail-Version: 0.94.1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: freebsd-acpi@freebsd.org Subject: Re: toshiba portege r100 resumes from S3 after a small patch X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 23 Mar 2007 18:07:41 -0000 alex65536@yandex.ru wrote: > I've found a way to make my toshiba portege r100 resume. > > I just edited function ata_resume() in /usr/src/sys/dev/ata/ata-all.c like > that: > > ... > int > ata_resume(device_t dev) > { > printf("a delay to be sure disks have started...\n"); > DELAY(2000000); // delay for 2 seconds > ... > } > ... > > Without that delay system crashes sometimes with message "ad0: detached". > > I think that would work with some other toshiba laptops. > > A small problem is that the delay occurs two times, for both ata > channels, but it's better than nothing. It sounds like the ata driver is somehow timing out too quickly on the first commands. I've forwarded this to the ata maintainer to see if he has any comments. Thanks, Nate From owner-freebsd-acpi@FreeBSD.ORG Fri Mar 23 18:12:05 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 06D0516A400 for ; Fri, 23 Mar 2007 18:12:05 +0000 (UTC) (envelope-from nate@root.org) Received: from root.org (root.org [67.118.192.226]) by mx1.freebsd.org (Postfix) with ESMTP id CAF3613C4C2 for ; Fri, 23 Mar 2007 18:12:04 +0000 (UTC) (envelope-from nate@root.org) Received: (qmail 48531 invoked from network); 23 Mar 2007 17:33:37 -0000 Received: from ppp-71-139-28-99.dsl.snfc21.pacbell.net (HELO ?10.0.0.235?) (nate-mail@71.139.28.99) by root.org with ESMTPA; 23 Mar 2007 17:33:37 -0000 Message-ID: <46040F6B.4020804@root.org> Date: Fri, 23 Mar 2007 10:33:31 -0700 From: Nate Lawson User-Agent: Thunderbird 1.5.0.7 (X11/20061027) MIME-Version: 1.0 To: Paul van der Linden References: <4603D9C8.5050807@paultjuh.org> In-Reply-To: <4603D9C8.5050807@paultjuh.org> X-Enigmail-Version: 0.94.1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: freebsd-acpi@freebsd.org Subject: Re: ACPI doesn't work? X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 23 Mar 2007 18:12:05 -0000 Paul van der Linden wrote: > Hi, > I've just installed a freebsd distribution on a real computer for the > first time (I only have run freebsd in vmware). > The problem is, that acpi doesn't seem to work. My fans are constantly > working on fullspeed, and when I run powerd -v it gives some errors > while throttling my cpu: > server# powerd -v > powerd: cannot read AC line status, using default settings > idle time > 90%, decreasing clock speed from 1862 MHz to 1629 MHz > powerd: error setting CPU frequency 1629: Device not configured Try loading the cpufreq.ko kernel module. > The dmesg.boot gives some errors: > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR harmless. > acpi_throttle1: failed to attach P_CNT > > Is there some way to fix this, or isn't my motherboard supported? > My motherboard is an Asus P5M2-M with Intel 3000 MCH chipset, and I've > included the ACPI part of the dmesg.boot: That doesn't help. How about output of devinfo -rv and a link to your ASL (acpidump -dt | gzip -c9 > asus-p5m2.gz)? -- Nate From owner-freebsd-acpi@FreeBSD.ORG Fri Mar 23 19:49:03 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 97D6016A402 for ; Fri, 23 Mar 2007 19:49:03 +0000 (UTC) (envelope-from drgerlists@gmail.com) Received: from wx-out-0506.google.com (wx-out-0506.google.com [66.249.82.233]) by mx1.freebsd.org (Postfix) with ESMTP id 494FA13C465 for ; Fri, 23 Mar 2007 19:49:03 +0000 (UTC) (envelope-from drgerlists@gmail.com) Received: by wx-out-0506.google.com with SMTP id s18so1278884wxc for ; Fri, 23 Mar 2007 12:49:02 -0700 (PDT) DKIM-Signature: a=rsa-sha1; c=relaxed/relaxed; d=gmail.com; s=beta; h=domainkey-signature:received:received:date:from:organization:reply-to:to:subject:cc:message-id:references:in-reply-to:user-agent:mime-version:content-type:content-transfer-encoding; b=aexpQ/BvqKmu9LsF0LHkW8X/FH6LFiDwkPsK35z2t24wTA4fHSgL0wq/z4aOOQl575LZYqRag3Uh3IwzxlWAe7E0kXQiu6RzbUOEwGJsEPoER65eZh6a6LAQk6noAViaIrvJpCsUEo3Vddnl6+Jtaj84P/cVC9rW4sVaC5cY/6I= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:date:from:organization:reply-to:to:subject:cc:message-id:references:in-reply-to:user-agent:mime-version:content-type:content-transfer-encoding; b=KcnoyXQqtNcsoScOVmfGcHxWJi+D4I/t6v761TRV9uXlP8mJW6I4HEQLeddO+CWHXQ8oDHlxIgS5h71Auh5calntCVnbaunB7Qtp74dbdQHXC5xp528HsJgYMS9tUarqlmWKKutlIi2D3EAWTcXSjsQVTeA6VyPPOZJL6gyhqbI= Received: by 10.90.56.14 with SMTP id e14mr5525811aga.1174679342197; Fri, 23 Mar 2007 12:49:02 -0700 (PDT) Received: from lmrmac.uhw.utoledo.edu ( [131.183.86.111]) by mx.google.com with ESMTP id 8sm5246679wrl.2007.03.23.12.49.01; Fri, 23 Mar 2007 12:49:01 -0700 (PDT) Date: Fri, 23 Mar 2007 15:49:00 -0400 From: drgerlists@gmail.com (Dr. Gary E. RAFE) Organization: Dr. Gary E. RAFE To: freebsd-acpi@freebsd.org Message-ID: <46042f2c.PZfGFyGLVM1nvr2WaewaUckN@lmrmac.uhw.utoledo.edu> References: <46029737.9070802@vindaloo.com> <4602d2fc.wRgBbBVhcmoCREibG4jUkNFr@lmrmac.uhw.utoledo.edu> <4603EFD9.3040308@vindaloo.com> <46040FB4.2090403@root.org> In-Reply-To: <46040FB4.2090403@root.org> User-Agent: Heirloom mailx 12.2 01/07/07 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: Subject: Re: ACPI suspend/resume on HP Compaq nc6230 X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: drgerlists@gmail.com List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 23 Mar 2007 19:49:03 -0000 Nate Lawson wrote: !Try this message. The original plain-text attachment didn't get added here, but I can report that adding the suggested DELAY code to ata_resume() in ata-all.c of 6.1-RELEASE appears to make my Toshiba Satellite Pro 6100 behave across an ACPI Suspend-to-RAM/Resume cycle. (At least two times in a test with only / partition mounted, which is better results than I've ever had previously. Now onto more actual work conditions testing...). --Gary -- Dr Gary E RAFE: drgerlists at gmail dot com