From owner-freebsd-usb@FreeBSD.ORG Sun Jan 3 10:40:15 2010 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C7FCE1065693; Sun, 3 Jan 2010 10:40:15 +0000 (UTC) (envelope-from cochard@gmail.com) Received: from mail-ew0-f226.google.com (mail-ew0-f226.google.com [209.85.219.226]) by mx1.freebsd.org (Postfix) with ESMTP id 2D07C8FC1D; Sun, 3 Jan 2010 10:40:14 +0000 (UTC) Received: by ewy26 with SMTP id 26so12163581ewy.3 for ; Sun, 03 Jan 2010 02:40:12 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:sender:received:in-reply-to :references:from:date:x-google-sender-auth:message-id:subject:to:cc :content-type; bh=wXnAnSTZiJxfqZqTmDy3JsWDWJASTxra8X4rKxR7Ksc=; b=ZCVYKKPjpYP65jMEWvG4kShCxR1OIm6HotCAUhEV4ffPADdjqcCC2n6HTmyGZksf+G 7jde0m8SEnCW+xBmVxD2haWy5kV9R5y8vwKdS+jmIejVsou4Cyua2hNbzSov04iFmpfL 3Ep9pSgsQcBK0NsAC/rvDfTFpTnsGzLFXcnt0= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:sender:in-reply-to:references:from:date :x-google-sender-auth:message-id:subject:to:cc:content-type; b=H0HcqUBWjiasdrH3AtKjrJA3weBidJ/umC/keRvI/UUa0ir5xJnxlqL6gEdRJcCsF+ oOs8kHqI42jjFc+aEIqtJsHs7cAIIVKboYYvfNVPGYOYM/Xqr7Yzpa2cZNr9xL2HVmCV 7cDe/K1NNCxkb9iCInjbzJ5JXJS05TyjvG7No= MIME-Version: 1.0 Sender: cochard@gmail.com Received: by 10.216.85.68 with SMTP id t46mr6094885wee.114.1262515212237; Sun, 03 Jan 2010 02:40:12 -0800 (PST) In-Reply-To: <200909260916.45106.hselasky@c2i.net> References: <200909252038.n8PKcEch066064@www.freebsd.org> <200909260916.45106.hselasky@c2i.net> From: =?ISO-8859-1?Q?Olivier_Cochard=2DLabb=E9?= Date: Sun, 3 Jan 2010 11:39:52 +0100 X-Google-Sender-Auth: 7e0fc10462810253 Message-ID: <3131aa531001030239u7aa0655bt40a74829f73ee2c0@mail.gmail.com> To: Hans Petter Selasky Content-Type: text/plain; charset=ISO-8859-1 Cc: freebsd-gnats-submit@freebsd.org, freebsd-usb@freebsd.org Subject: Re: usb/139142: [regression] ehci drivers (NVIDIA nForce4 USB 2.0 controller ) not working with 8.0-RC1 X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 03 Jan 2010 10:40:15 -0000 It's not an USB bug, but an ACPI regression. You can close this PR (I will open a new PR related to ACPI). Regards, Olivier From owner-freebsd-usb@FreeBSD.ORG Sun Jan 3 10:50:03 2010 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7DDDC106566C for ; Sun, 3 Jan 2010 10:50:03 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 5169F8FC13 for ; Sun, 3 Jan 2010 10:50:03 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id o03Ao3lN075367 for ; Sun, 3 Jan 2010 10:50:03 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id o03Ao3M0075366; Sun, 3 Jan 2010 10:50:03 GMT (envelope-from gnats) Date: Sun, 3 Jan 2010 10:50:03 GMT Message-Id: <201001031050.o03Ao3M0075366@freefall.freebsd.org> To: freebsd-usb@FreeBSD.org From: =?ISO-8859-1?Q?Olivier_Cochard=2DLabb=E9?= Cc: Subject: Re: usb/139142: [regression] ehci drivers (NVIDIA nForce4 USB 2.0 controller ) not working with 8.0-RC1 X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: =?ISO-8859-1?Q?Olivier_Cochard=2DLabb=E9?= List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 03 Jan 2010 10:50:03 -0000 The following reply was made to PR usb/139142; it has been noted by GNATS. From: =?ISO-8859-1?Q?Olivier_Cochard=2DLabb=E9?= To: Hans Petter Selasky Cc: freebsd-usb@freebsd.org, freebsd-gnats-submit@freebsd.org Subject: Re: usb/139142: [regression] ehci drivers (NVIDIA nForce4 USB 2.0 controller ) not working with 8.0-RC1 Date: Sun, 3 Jan 2010 11:39:52 +0100 It's not an USB bug, but an ACPI regression. You can close this PR (I will open a new PR related to ACPI). Regards, Olivier From owner-freebsd-usb@FreeBSD.ORG Sun Jan 3 12:33:44 2010 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1C5B8106568B; Sun, 3 Jan 2010 12:33:44 +0000 (UTC) (envelope-from gavin@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id E7E268FC22; Sun, 3 Jan 2010 12:33:43 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id o03CXhuN085479; Sun, 3 Jan 2010 12:33:43 GMT (envelope-from gavin@freefall.freebsd.org) Received: (from gavin@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id o03CXhiY085475; Sun, 3 Jan 2010 12:33:43 GMT (envelope-from gavin) Date: Sun, 3 Jan 2010 12:33:43 GMT Message-Id: <201001031233.o03CXhiY085475@freefall.freebsd.org> To: rsmith@xs4all.nl, gavin@FreeBSD.org, freebsd-bugs@FreeBSD.org, freebsd-usb@FreeBSD.org From: gavin@FreeBSD.org Cc: Subject: Re: bin/137180: [build] [patch] building world for 8.0-BETA2 fails on 7.2-RELEASE X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 03 Jan 2010 12:33:44 -0000 Synopsis: [build] [patch] building world for 8.0-BETA2 fails on 7.2-RELEASE State-Changed-From-To: open->feedback State-Changed-By: gavin State-Changed-When: Sun Jan 3 12:32:15 UTC 2010 State-Changed-Why: To submitter: do you know if this has been fixed? I've not seen any other reports of it, and usually before a release is published it is tested to ensure an upgrade can be done from the previous release. Responsible-Changed-From-To: freebsd-bugs->freebsd-usb Responsible-Changed-By: gavin Responsible-Changed-When: Sun Jan 3 12:32:15 UTC 2010 Responsible-Changed-Why: USB related issue http://www.freebsd.org/cgi/query-pr.cgi?pr=137180 From owner-freebsd-usb@FreeBSD.ORG Sun Jan 3 13:30:04 2010 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9CAED106568B for ; Sun, 3 Jan 2010 13:30:04 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 738998FC17 for ; Sun, 3 Jan 2010 13:30:04 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id o03DU4B6037635 for ; Sun, 3 Jan 2010 13:30:04 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id o03DU4Uo037634; Sun, 3 Jan 2010 13:30:04 GMT (envelope-from gnats) Date: Sun, 3 Jan 2010 13:30:04 GMT Message-Id: <201001031330.o03DU4Uo037634@freefall.freebsd.org> To: freebsd-usb@FreeBSD.org From: Roland Smith Cc: Subject: Re: bin/137180: [build] [patch] building world for 8.0-BETA2 fails on 7.2-RELEASE X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Roland Smith List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 03 Jan 2010 13:30:04 -0000 The following reply was made to PR bin/137180; it has been noted by GNATS. From: Roland Smith To: gavin@FreeBSD.org Cc: Subject: Re: bin/137180: [build] [patch] building world for 8.0-BETA2 fails on 7.2-RELEASE Date: Sun, 3 Jan 2010 13:54:27 +0100 --TB36FDmn/VVEgNH/ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Jan 03, 2010 at 12:33:43PM +0000, gavin@FreeBSD.org wrote: > Synopsis: [build] [patch] building world for 8.0-BETA2 fails on 7.2-RELEA= SE >=20 > State-Changed-From-To: open->feedback > State-Changed-By: gavin > State-Changed-When: Sun Jan 3 12:32:15 UTC 2010 > State-Changed-Why:=20 > To submitter: do you know if this has been fixed? I've not seen > any other reports of it, and usually before a release is published > it is tested to ensure an upgrade can be done from the previous > release. This problem occurred on one machine. On the second machine I deleted libus= b1 and all ports that depended on it _before_ upgrading the base system, so it didn't cause any problems. So I guess that would be the "fix". It is not very difficult once you know. And if nobody else had the same problem, you can close the PR as far = as I'm concerned. Roland --=20 R.F.Smith http://www.xs4all.nl/~rsmith/ [plain text _non-HTML_ PGP/GnuPG encrypted/signed email much appreciated] pgp: 1A2B 477F 9970 BA3C 2914 B7CE 1277 EFB0 C321 A725 (KeyID: C321A725) --TB36FDmn/VVEgNH/ Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (FreeBSD) iEYEARECAAYFAktAk4MACgkQEnfvsMMhpyVcUgCfT3F0sHcqKA/QAxjyhc5MgfY3 YPgAoKUNRW3aE1aYmZQ1XiWFtxi0dPc0 =cIpe -----END PGP SIGNATURE----- --TB36FDmn/VVEgNH/-- From owner-freebsd-usb@FreeBSD.ORG Sun Jan 3 21:20:02 2010 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1A91E1065672 for ; Sun, 3 Jan 2010 21:20:02 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id D0B998FC14 for ; Sun, 3 Jan 2010 21:20:01 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id o03LK1Lc002446 for ; Sun, 3 Jan 2010 21:20:01 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id o03LK1WX002445; Sun, 3 Jan 2010 21:20:01 GMT (envelope-from gnats) Resent-Date: Sun, 3 Jan 2010 21:20:01 GMT Resent-Message-Id: <201001032120.o03LK1WX002445@freefall.freebsd.org> Resent-From: FreeBSD-gnats-submit@FreeBSD.org (GNATS Filer) Resent-To: freebsd-usb@FreeBSD.org Resent-Reply-To: FreeBSD-gnats-submit@FreeBSD.org, Brodey Dover Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 61F481065676 for ; Sun, 3 Jan 2010 21:15:57 +0000 (UTC) (envelope-from nobody@FreeBSD.org) Received: from www.freebsd.org (www.freebsd.org [IPv6:2001:4f8:fff6::21]) by mx1.freebsd.org (Postfix) with ESMTP id 4E87B8FC14 for ; Sun, 3 Jan 2010 21:15:57 +0000 (UTC) Received: from www.freebsd.org (localhost [127.0.0.1]) by www.freebsd.org (8.14.3/8.14.3) with ESMTP id o03LFuHP071244 for ; Sun, 3 Jan 2010 21:15:57 GMT (envelope-from nobody@www.freebsd.org) Received: (from nobody@localhost) by www.freebsd.org (8.14.3/8.14.3/Submit) id o03LFujI071243; Sun, 3 Jan 2010 21:15:56 GMT (envelope-from nobody) Message-Id: <201001032115.o03LFujI071243@www.freebsd.org> Date: Sun, 3 Jan 2010 21:15:56 GMT From: Brodey Dover To: freebsd-gnats-submit@FreeBSD.org X-Send-Pr-Version: www-3.1 Cc: Subject: usb/142276: Cache Synchronization Error with Olympus FE210 Camera X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 03 Jan 2010 21:20:02 -0000 >Number: 142276 >Category: usb >Synopsis: Cache Synchronization Error with Olympus FE210 Camera >Confidential: no >Severity: serious >Priority: low >Responsible: freebsd-usb >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sun Jan 03 21:20:01 UTC 2010 >Closed-Date: >Last-Modified: >Originator: Brodey Dover >Release: FreeBSD 8- i386 - RELEASE - p1 >Organization: None. >Environment: FreeBSD pcbsd 8.0-RELEASE-p1 FreeBSD 8.0-RELEASE-p1 #3: Fri Dec 11 13:33:42 PST 2009 root@build8x32.pcbsd.org:/usr/obj/usr/pcbsd-build80/fbsd-source/8.0-src/sys/PCBSD i386 >Description: When plugging in the camera the system message buffer outputs many lines about cache synchronization issues. When adding, deleting or changing files stored on the camera more errors will display about cache synchronization. Furthermore, while mounting the camera X/KDE become unresponsive to mouse and keyboard inputs. If music is playing, it will either stop completely or squeal (excessive interrupts). Here is output from dmesg that is relevant to the issue: ugen0.4: at usbus0 (disconnected) umass0: at uhub0, port 6, addr 4 (disconnected) (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry ugen0.4: at usbus0 umass0: on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:3:0:-1: Attached to scbus3 da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 1999MB (4095630 512 byte sectors: 255H 63S/T 254C) (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 GEOM: da0: partition 1 does not start on a track boundary. GEOM: da0: partition 1 does not end on a track boundary. (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 ugen0.4: at usbus0 (disconnected) umass0: at uhub0, port 6, addr 4 (disconnected) (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry ugen0.4: at usbus0 umass0: on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:3:0:-1: Attached to scbus3 da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 1999MB (4095630 512 byte sectors: 255H 63S/T 254C) (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 ugen0.4: at usbus0 (disconnected) umass0: at uhub0, port 6, addr 4 (disconnected) (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry ugen0.4: at usbus0 umass0: on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:3:0:-1: Attached to scbus3 da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 1999MB (4095630 512 byte sectors: 255H 63S/T 254C) (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 pid 17259 (gdb), uid 1001: exited on signal 6 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 ugen0.4: at usbus0 (disconnected) umass0: at uhub0, port 6, addr 4 (disconnected) (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry Unfortunately I don't have another FE-210 but I have tried other Olympus cameras, Nikons and Canons and even other flash but none seem to exhibit this issue. Also, changing the SD card also doesn't "fix" the issue and the SD card in the FE-210 used by another camera also warrants the same errors and usability issues. >How-To-Repeat: Plug in an FE-210 Olympus camera. >Fix: None really. >Release-Note: >Audit-Trail: >Unformatted: From owner-freebsd-usb@FreeBSD.ORG Sun Jan 3 21:45:03 2010 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 75F6B106566B; Sun, 3 Jan 2010 21:45:03 +0000 (UTC) (envelope-from hselasky@c2i.net) Received: from swip.net (mailfe13.tele2.se [212.247.155.129]) by mx1.freebsd.org (Postfix) with ESMTP id 66AD58FC20; Sun, 3 Jan 2010 21:45:01 +0000 (UTC) X-Cloudmark-Score: 0.000000 [] X-Cloudmark-Analysis: v=1.0 c=1 a=QEz2SFEN87YA:10 a=MnI1ikcADjEx7bvsp0jZvQ==:17 a=x2m3GPe0AAAA:8 a=YJWyZuklAxx6DtU8ClwA:9 a=vKmimvK_cYSTpoz-6DUA:7 a=D-SK8PoQxU9AmnVQ1A8SNjhPElYA:4 Received: from [188.126.201.140] (account mc467741@c2i.net HELO laptop002.hselasky.homeunix.org) by mailfe13.swip.net (CommuniGate Pro SMTP 5.2.16) with ESMTPA id 972675929; Sun, 03 Jan 2010 22:45:00 +0100 From: Hans Petter Selasky To: freebsd-usb@freebsd.org Date: Sun, 3 Jan 2010 22:43:38 +0100 User-Agent: KMail/1.12.1 (FreeBSD/8.0-STABLE; KDE/4.3.1; amd64; ; ) References: <201001032115.o03LFujI071243@www.freebsd.org> In-Reply-To: <201001032115.o03LFujI071243@www.freebsd.org> X-Face: (%:6u[ldzJ`0qjD7sCkfdMmD*RxpOwEEQ+KWt[{J#x6ow~JO:,zwp.(t; @Aq :4:&nFCgDb8[3oIeTb^'",;u{5{}C9>"PuY\)!=#\u9SSM-nz8+SR~B\!qBv MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit Message-Id: <201001032243.38734.hselasky@c2i.net> Cc: freebsd-gnats-submit@freebsd.org, Brodey Dover Subject: Re: usb/142276: Cache Synchronization Error with Olympus FE210 Camera X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 03 Jan 2010 21:45:03 -0000 On Sunday 03 January 2010 22:15:56 Brodey Dover wrote: > >Number: 142276 > >Category: usb > >Synopsis: Cache Synchronization Error with Olympus FE210 Camera > >Confidential: no > >Severity: serious > >Priority: low > >Responsible: freebsd-usb > >State: open > >Quarter: > >Keywords: > >Date-Required: > >Class: sw-bug > >Submitter-Id: current-users > >Arrival-Date: Sun Jan 03 21:20:01 UTC 2010 > >Closed-Date: > >Last-Modified: > >Originator: Brodey Dover > >Release: FreeBSD 8- i386 - RELEASE - p1 > >Organization: > > None. > > >Environment: > > FreeBSD pcbsd 8.0-RELEASE-p1 FreeBSD 8.0-RELEASE-p1 #3: Fri Dec 11 13:33:42 > PST 2009 > root@build8x32.pcbsd.org:/usr/obj/usr/pcbsd-build80/fbsd-source/8.0-src/sy > s/PCBSD i386 > > >Description: > > When plugging in the camera the system message buffer outputs many lines > about cache synchronization issues. When adding, deleting or changing > files stored on the camera more errors will display about cache > synchronization. > > Furthermore, while mounting the camera X/KDE become unresponsive to mouse > and keyboard inputs. If music is playing, it will either stop completely > or squeal (excessive interrupts). > > Here is output from dmesg that is relevant to the issue: > > ugen0.4: at usbus0 (disconnected) > umass0: at uhub0, port 6, addr 4 (disconnected) > (da0:umass-sim0:0:0:0): lost device > (da0:umass-sim0:0:0:0): removing device entry > ugen0.4: at usbus0 > umass0: on usbus0 > umass0: SCSI over Bulk-Only; quirks = 0x0000 > umass0:3:0:-1: Attached to scbus3 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: 1999MB (4095630 512 byte sectors: 255H 63S/T 254C) > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 GEOM: da0: partition 1 does not start on a track > boundary. > GEOM: da0: partition 1 does not end on a track boundary. > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 ugen0.4: at usbus0 (disconnected) > umass0: at uhub0, port 6, addr 4 (disconnected) > (da0:umass-sim0:0:0:0): lost device > (da0:umass-sim0:0:0:0): removing device entry > ugen0.4: at usbus0 > umass0: on usbus0 > umass0: SCSI over Bulk-Only; quirks = 0x0000 > umass0:3:0:-1: Attached to scbus3 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: 1999MB (4095630 512 byte sectors: 255H 63S/T 254C) > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 ugen0.4: at usbus0 > (disconnected) > umass0: at uhub0, port 6, addr 4 (disconnected) > (da0:umass-sim0:0:0:0): lost device > (da0:umass-sim0:0:0:0): removing device entry > ugen0.4: at usbus0 > umass0: on usbus0 > umass0: SCSI over Bulk-Only; quirks = 0x0000 > umass0:3:0:-1: Attached to scbus3 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: 1999MB (4095630 512 byte sectors: 255H 63S/T 254C) > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 pid 17259 > (gdb), uid 1001: exited on signal 6 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 ugen0.4: at usbus0 > (disconnected) > umass0: at uhub0, port 6, addr 4 (disconnected) > (da0:umass-sim0:0:0:0): lost device > (da0:umass-sim0:0:0:0): removing device entry > > Unfortunately I don't have another FE-210 but I have tried other Olympus > cameras, Nikons and Canons and even other flash but none seem to exhibit > this issue. Also, changing the SD card also doesn't "fix" the issue and > the SD card in the FE-210 used by another camera also warrants the same > errors and usability issues. > > >How-To-Repeat: > > Plug in an FE-210 Olympus camera. > > >Fix: > > None really. > > >Release-Note: > >Audit-Trail: > >Unformatted: > Hi, There should be a quirks table in "sys/dev/usb/storage/umass.c" . If you are running 8-stable, the quirks table has been moved to "sys/dev/usb/quirk/usb_quirk.c" and is settable via usbconfig. See the the add_quirk_vplh command for usbconfig. --HPS From owner-freebsd-usb@FreeBSD.ORG Sun Jan 3 21:50:03 2010 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6B07710656A6 for ; Sun, 3 Jan 2010 21:50:03 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 583AD8FC23 for ; Sun, 3 Jan 2010 21:50:03 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id o03Lo31K029443 for ; Sun, 3 Jan 2010 21:50:03 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id o03Lo3sm029442; Sun, 3 Jan 2010 21:50:03 GMT (envelope-from gnats) Date: Sun, 3 Jan 2010 21:50:03 GMT Message-Id: <201001032150.o03Lo3sm029442@freefall.freebsd.org> To: freebsd-usb@FreeBSD.org From: Hans Petter Selasky Cc: Subject: Re: usb/142276: Cache Synchronization Error with Olympus FE210 Camera X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Hans Petter Selasky List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 03 Jan 2010 21:50:03 -0000 The following reply was made to PR usb/142276; it has been noted by GNATS. From: Hans Petter Selasky To: freebsd-usb@freebsd.org Cc: Brodey Dover , freebsd-gnats-submit@freebsd.org Subject: Re: usb/142276: Cache Synchronization Error with Olympus FE210 Camera Date: Sun, 3 Jan 2010 22:43:38 +0100 On Sunday 03 January 2010 22:15:56 Brodey Dover wrote: > >Number: 142276 > >Category: usb > >Synopsis: Cache Synchronization Error with Olympus FE210 Camera > >Confidential: no > >Severity: serious > >Priority: low > >Responsible: freebsd-usb > >State: open > >Quarter: > >Keywords: > >Date-Required: > >Class: sw-bug > >Submitter-Id: current-users > >Arrival-Date: Sun Jan 03 21:20:01 UTC 2010 > >Closed-Date: > >Last-Modified: > >Originator: Brodey Dover > >Release: FreeBSD 8- i386 - RELEASE - p1 > >Organization: > > None. > > >Environment: > > FreeBSD pcbsd 8.0-RELEASE-p1 FreeBSD 8.0-RELEASE-p1 #3: Fri Dec 11 13:33:42 > PST 2009 > root@build8x32.pcbsd.org:/usr/obj/usr/pcbsd-build80/fbsd-source/8.0-src/sy > s/PCBSD i386 > > >Description: > > When plugging in the camera the system message buffer outputs many lines > about cache synchronization issues. When adding, deleting or changing > files stored on the camera more errors will display about cache > synchronization. > > Furthermore, while mounting the camera X/KDE become unresponsive to mouse > and keyboard inputs. If music is playing, it will either stop completely > or squeal (excessive interrupts). > > Here is output from dmesg that is relevant to the issue: > > ugen0.4: at usbus0 (disconnected) > umass0: at uhub0, port 6, addr 4 (disconnected) > (da0:umass-sim0:0:0:0): lost device > (da0:umass-sim0:0:0:0): removing device entry > ugen0.4: at usbus0 > umass0: on usbus0 > umass0: SCSI over Bulk-Only; quirks = 0x0000 > umass0:3:0:-1: Attached to scbus3 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: 1999MB (4095630 512 byte sectors: 255H 63S/T 254C) > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 GEOM: da0: partition 1 does not start on a track > boundary. > GEOM: da0: partition 1 does not end on a track boundary. > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 ugen0.4: at usbus0 (disconnected) > umass0: at uhub0, port 6, addr 4 (disconnected) > (da0:umass-sim0:0:0:0): lost device > (da0:umass-sim0:0:0:0): removing device entry > ugen0.4: at usbus0 > umass0: on usbus0 > umass0: SCSI over Bulk-Only; quirks = 0x0000 > umass0:3:0:-1: Attached to scbus3 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: 1999MB (4095630 512 byte sectors: 255H 63S/T 254C) > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 ugen0.4: at usbus0 > (disconnected) > umass0: at uhub0, port 6, addr 4 (disconnected) > (da0:umass-sim0:0:0:0): lost device > (da0:umass-sim0:0:0:0): removing device entry > ugen0.4: at usbus0 > umass0: on usbus0 > umass0: SCSI over Bulk-Only; quirks = 0x0000 > umass0:3:0:-1: Attached to scbus3 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: 1999MB (4095630 512 byte sectors: 255H 63S/T 254C) > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 pid 17259 > (gdb), uid 1001: exited on signal 6 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize > cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): > Synchronize cache failed, status == 0x4, scsi status == 0x0 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == > 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, > status == 0x4, scsi status == 0x0 ugen0.4: at usbus0 > (disconnected) > umass0: at uhub0, port 6, addr 4 (disconnected) > (da0:umass-sim0:0:0:0): lost device > (da0:umass-sim0:0:0:0): removing device entry > > Unfortunately I don't have another FE-210 but I have tried other Olympus > cameras, Nikons and Canons and even other flash but none seem to exhibit > this issue. Also, changing the SD card also doesn't "fix" the issue and > the SD card in the FE-210 used by another camera also warrants the same > errors and usability issues. > > >How-To-Repeat: > > Plug in an FE-210 Olympus camera. > > >Fix: > > None really. > > >Release-Note: > >Audit-Trail: > >Unformatted: > Hi, There should be a quirks table in "sys/dev/usb/storage/umass.c" . If you are running 8-stable, the quirks table has been moved to "sys/dev/usb/quirk/usb_quirk.c" and is settable via usbconfig. See the the add_quirk_vplh command for usbconfig. --HPS From owner-freebsd-usb@FreeBSD.ORG Sun Jan 3 22:51:21 2010 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id EBF721065693 for ; Sun, 3 Jan 2010 22:51:21 +0000 (UTC) (envelope-from doverosx@gmail.com) Received: from qw-out-2122.google.com (qw-out-2122.google.com [74.125.92.25]) by mx1.freebsd.org (Postfix) with ESMTP id 9ADDA8FC08 for ; Sun, 3 Jan 2010 22:51:21 +0000 (UTC) Received: by qw-out-2122.google.com with SMTP id 9so3309641qwb.7 for ; Sun, 03 Jan 2010 14:51:11 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from :user-agent:mime-version:to:cc:subject:references:in-reply-to :content-type:content-transfer-encoding; bh=sDKts7sePjeWF5WN8Mac8EmWXfNdwtERQyNNnVvyTEI=; b=nbx0f+U9u3RJ98sUXYl87av5kX9hUZ/O3tostKOEh7o7vcDOiHk5/U9d5rqQGlBUuv Nh8oWRf2fMPD9aCSiglriNmhYcP0wxqzN+Y82Idl9Rr6NboQimMA9z/zEj7M6OdKWXQ/ 3orXdVVe28srG+siDcUQmvFJhutvtZoTP6AB8= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:user-agent:mime-version:to:cc:subject :references:in-reply-to:content-type:content-transfer-encoding; b=m4DVxbIubKzp8aypoD0DbkwxPvgw1o30DSG83JEsEtni1IbfhEk4UEnNbt0/0d2L3r 0MyKSeG+VtrxRBU7weyT9DqAyhPcm9LSX7ihHqe/QSQI6HtW1E1TfJN4IyONPN7Ppfic 6FWELi9+t6EFAAaL0C1emZAwIEFpNH2oRpUlw= Received: by 10.224.79.234 with SMTP id q42mr10757045qak.364.1262557556497; Sun, 03 Jan 2010 14:25:56 -0800 (PST) Received: from ?192.168.1.100? (CPE002369161858-CM001868521d34.cpe.net.cable.rogers.com [99.241.8.135]) by mx.google.com with ESMTPS id 21sm15872332qyk.8.2010.01.03.14.25.53 (version=TLSv1/SSLv3 cipher=RC4-MD5); Sun, 03 Jan 2010 14:25:55 -0800 (PST) Message-ID: <4B41196F.4020203@gmail.com> Date: Sun, 03 Jan 2010 17:25:51 -0500 From: "doverosx@gmail.com" User-Agent: Thunderbird 2.0.0.23 (X11/20091225) MIME-Version: 1.0 To: Hans Petter Selasky References: <201001032115.o03LFujI071243@www.freebsd.org> <201001032243.38734.hselasky@c2i.net> In-Reply-To: <201001032243.38734.hselasky@c2i.net> Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-usb@freebsd.org Subject: Re: usb/142276: Cache Synchronization Error with Olympus FE210 Camera X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 03 Jan 2010 22:51:22 -0000 Hans Petter Selasky wrote: > On Sunday 03 January 2010 22:15:56 Brodey Dover wrote: > >>> Number: 142276 >>> Category: usb >>> Synopsis: Cache Synchronization Error with Olympus FE210 Camera >>> Confidential: no >>> Severity: serious >>> Priority: low >>> Responsible: freebsd-usb >>> State: open >>> Quarter: >>> Keywords: >>> Date-Required: >>> Class: sw-bug >>> Submitter-Id: current-users >>> Arrival-Date: Sun Jan 03 21:20:01 UTC 2010 >>> Closed-Date: >>> Last-Modified: >>> Originator: Brodey Dover >>> Release: FreeBSD 8- i386 - RELEASE - p1 >>> Organization: >>> >> None. >> >> >>> Environment: >>> >> FreeBSD pcbsd 8.0-RELEASE-p1 FreeBSD 8.0-RELEASE-p1 #3: Fri Dec 11 13:33:42 >> PST 2009 >> root@build8x32.pcbsd.org:/usr/obj/usr/pcbsd-build80/fbsd-source/8.0-src/sy >> s/PCBSD i386 >> >> >>> Description: >>> >> When plugging in the camera the system message buffer outputs many lines >> about cache synchronization issues. When adding, deleting or changing >> files stored on the camera more errors will display about cache >> synchronization. >> >> Furthermore, while mounting the camera X/KDE become unresponsive to mouse >> and keyboard inputs. If music is playing, it will either stop completely >> or squeal (excessive interrupts). >> >> Here is output from dmesg that is relevant to the issue: >> >> ugen0.4: at usbus0 (disconnected) >> umass0: at uhub0, port 6, addr 4 (disconnected) >> (da0:umass-sim0:0:0:0): lost device >> (da0:umass-sim0:0:0:0): removing device entry >> ugen0.4: at usbus0 >> umass0: on usbus0 >> umass0: SCSI over Bulk-Only; quirks = 0x0000 >> umass0:3:0:-1: Attached to scbus3 >> da0 at umass-sim0 bus 0 target 0 lun 0 >> da0: Removable Direct Access SCSI-0 device >> da0: 1.000MB/s transfers >> da0: 1999MB (4095630 512 byte sectors: 255H 63S/T 254C) >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 GEOM: da0: partition 1 does not start on a track >> boundary. >> GEOM: da0: partition 1 does not end on a track boundary. >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 ugen0.4: at usbus0 (disconnected) >> umass0: at uhub0, port 6, addr 4 (disconnected) >> (da0:umass-sim0:0:0:0): lost device >> (da0:umass-sim0:0:0:0): removing device entry >> ugen0.4: at usbus0 >> umass0: on usbus0 >> umass0: SCSI over Bulk-Only; quirks = 0x0000 >> umass0:3:0:-1: Attached to scbus3 >> da0 at umass-sim0 bus 0 target 0 lun 0 >> da0: Removable Direct Access SCSI-0 device >> da0: 1.000MB/s transfers >> da0: 1999MB (4095630 512 byte sectors: 255H 63S/T 254C) >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 ugen0.4: at usbus0 >> (disconnected) >> umass0: at uhub0, port 6, addr 4 (disconnected) >> (da0:umass-sim0:0:0:0): lost device >> (da0:umass-sim0:0:0:0): removing device entry >> ugen0.4: at usbus0 >> umass0: on usbus0 >> umass0: SCSI over Bulk-Only; quirks = 0x0000 >> umass0:3:0:-1: Attached to scbus3 >> da0 at umass-sim0 bus 0 target 0 lun 0 >> da0: Removable Direct Access SCSI-0 device >> da0: 1.000MB/s transfers >> da0: 1999MB (4095630 512 byte sectors: 255H 63S/T 254C) >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 pid 17259 >> (gdb), uid 1001: exited on signal 6 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize >> cache failed, status == 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): >> Synchronize cache failed, status == 0x4, scsi status == 0x0 >> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi >> status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == >> 0x4, scsi status == 0x0 (da0:umass-sim0:0:0:0): Synchronize cache failed, >> status == 0x4, scsi status == 0x0 ugen0.4: at usbus0 >> (disconnected) >> umass0: at uhub0, port 6, addr 4 (disconnected) >> (da0:umass-sim0:0:0:0): lost device >> (da0:umass-sim0:0:0:0): removing device entry >> >> Unfortunately I don't have another FE-210 but I have tried other Olympus >> cameras, Nikons and Canons and even other flash but none seem to exhibit >> this issue. Also, changing the SD card also doesn't "fix" the issue and >> the SD card in the FE-210 used by another camera also warrants the same >> errors and usability issues. >> >> >>> How-To-Repeat: >>> >> Plug in an FE-210 Olympus camera. >> >> >>> Fix: >>> >> None really. >> >> >>> Release-Note: >>> Audit-Trail: >>> Unformatted: >>> > > Hi, > > There should be a quirks table in "sys/dev/usb/storage/umass.c" . > > If you are running 8-stable, the quirks table has been moved to > "sys/dev/usb/quirk/usb_quirk.c" and is settable via usbconfig. > > See the the add_quirk_vplh command for usbconfig. > > --HPS > > I currently have these quirks to add: UQ_AUDIO_SWAP_LR UQ_AU_INP_ASYNC UQ_AU_NO_FRAC UQ_AU_NO_XU UQ_BAD_ADC UQ_BAD_AUDIO UQ_BROKEN_BIDIR UQ_BUS_POWERED UQ_HID_IGNORE UQ_KBD_IGNORE UQ_MS_BAD_CLASS UQ_MS_LEADING_BYTE UQ_MS_REVZ UQ_NO_STRINGS UQ_OPEN_CLEARSTALL UQ_POWER_CLAIM UQ_SPUR_BUT_UP UQ_SWAP_UNICODE UQ_CFG_INDEX_1 UQ_CFG_INDEX_2 UQ_CFG_INDEX_3 UQ_CFG_INDEX_4 UQ_CFG_INDEX_0 and this is the line that I have setup now: usbconfig -u 0 -a 4 -i 0 add_dev_quirk_vplh 0x07b4 0x0109 0x0000 0xffff Thanks for the response Hans! From owner-freebsd-usb@FreeBSD.ORG Mon Jan 4 03:27:26 2010 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 991C7106566C for ; Mon, 4 Jan 2010 03:27:26 +0000 (UTC) (envelope-from areilly@bigpond.net.au) Received: from nskntqsrv03p.mx.bigpond.com (nskntqsrv03p.mx.bigpond.com [61.9.168.237]) by mx1.freebsd.org (Postfix) with ESMTP id 278F58FC19 for ; Mon, 4 Jan 2010 03:27:25 +0000 (UTC) Received: from nskntotgx02p.mx.bigpond.com ([124.188.161.100]) by nskntmtas03p.mx.bigpond.com with ESMTP id <20100104030904.BNSF1310.nskntmtas03p.mx.bigpond.com@nskntotgx02p.mx.bigpond.com> for ; Mon, 4 Jan 2010 03:09:04 +0000 Received: from duncan.reilly.home ([124.188.161.100]) by nskntotgx02p.mx.bigpond.com with ESMTP id <20100104030903.GPZC5306.nskntotgx02p.mx.bigpond.com@duncan.reilly.home> for ; Mon, 4 Jan 2010 03:09:03 +0000 Date: Mon, 4 Jan 2010 14:09:03 +1100 From: Andrew Reilly To: freebsd-usb@freebsd.org Message-ID: <20100104030903.GA15746@duncan.reilly.home> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.2.3i X-Authentication-Info: Submitted using SMTP AUTH LOGIN at nskntotgx02p.mx.bigpond.com from [124.188.161.100] using ID areilly@bigpond.net.au at Mon, 4 Jan 2010 03:09:03 +0000 X-RPD-ScanID: Class unknown; VirusThreatLevel unknown, RefID str=0001.0A150201.4B415BD0.0043,ss=1,fgs=0 X-SIH-MSG-ID: qRA0Fdf9TAD0zmQs0WyzOwJxyArnqyN48Z4QX81loRIGTUDCp8DeQ9reLP1Ru9+4xC5IJhqGNGEpaazgTY3Rs9mK Subject: Getting a scanner to work with new usb stack? X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 04 Jan 2010 03:27:26 -0000 Hi there, For many years I've been happily (if only occasionally) using an AGFA Snapscan e20 flat-bed USB scanner, using xsane. This scanner (apparently) requires a "firmware upload", which I had managed to arrange with this line in /usr/local/etc/sane.d/snapscan.conf: firmware /usr/local/share/sane/snapscan/snape20.bin I don't know whether or not that is (or is related to) the problem, but it isn't working any more, and I've run out of ideas to try, so thought I'd ask here. sane-find-scanner finds: found USB scanner (vendor=0x06bd [AGFA ], product=0x2091 [SNAPSCAN]) at libusb:/dev/usb:/dev/ugen0.3 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. But no amount of scanimage -d spellings or SANE_DEFAULT_DEVICE tweaking seems to make scanimage or xsane happy. ("snapscan:/dev/uscanner0" used to be what I used.) For what it's worth, I'm running -current as of Saturday, and my dmesg.boot says: ugen0.3: at usbus0 Any suggestions? Cheers, -- Andrew From owner-freebsd-usb@FreeBSD.ORG Mon Jan 4 11:07:08 2010 Return-Path: Delivered-To: freebsd-usb@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 250B7106568F for ; Mon, 4 Jan 2010 11:07:08 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 1337F8FC08 for ; Mon, 4 Jan 2010 11:07:08 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id o04B771B065048 for ; Mon, 4 Jan 2010 11:07:07 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id o04B775w065046 for freebsd-usb@FreeBSD.org; Mon, 4 Jan 2010 11:07:07 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 4 Jan 2010 11:07:07 GMT Message-Id: <201001041107.o04B775w065046@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-usb@FreeBSD.org Cc: Subject: Current problem reports assigned to freebsd-usb@FreeBSD.org X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 04 Jan 2010 11:07:08 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o usb/142276 usb Cache Synchronization Error with Olympus FE210 Camera o usb/142229 usb [ums] [hang] connecting a USB mouse to a Dell PE750 lo o usb/142228 usb [usbdevs] [patch] add a USB-HDD to usb_quirk.c and usb o usb/142225 usb [patch] Patch to add Quirk for Western Digital Mybook o usb/141936 usb [usbdevs] [patch] add support for Advanced W-ZERO3[ES] o usb/141918 usb ehci_interrupt: unrecoverable error, controller halted o usb/141680 usb [uath] Netgear WG111T not working with uath driver o usb/141664 usb [pcm] Logitech USB microphone failure [regression] o usb/141474 usb [boot] FreeBSD 8.0 can not install from USB CDROM driv o usb/141467 usb [uftdi] [patch] RATOC REX-USB60F (usb serial converter o usb/141327 usb [ukbd] [usb67] USB kbd not working with 7.1+PAE on IBM o usb/141313 usb [usb8] nvidia USB 2.0 controller - stops copying on US o usb/141212 usb [ukbd] [usb8] ukbd_set_leds_callback:700: error=USB_ER o usb/140928 usb [u3g] [usb8] [patch] ZTE CDMA2000 1X EV-DO (MG478/AC87 o usb/140920 usb [install] USB based install fails on 8.0-RELEASE [regr o usb/140893 usb [urtw] [usb8] WPA2 not working on rtl8187b f usb/140883 usb [axe] [usb8] USB gigabit ethernet hangs after short pe o kern/140849 usb [ums] [usb8] USB mouse doesn't work under FreeBSD 8.0- a usb/140810 usb [uftdi] [usb8] 8.X copy and paste problem / tty overfl f usb/140714 usb [hang] [usb8] system freeze when disconect my flash us o kern/140614 usb [uplcom] [patch] adding support for Radio Shack Gigwar o usb/140590 usb [bluetooth] [usb8] ng_ubt(4) ng_l2cap_process_cmd_rej o usb/140477 usb [umass] [usb8] [patch] allow boot-time attachment of d o usb/140259 usb [libusb] [patch] [usb8] libusb-1.0 portability/compati o usb/140236 usb [msdosfs] [usb8] Labels wiped on external Journaled US o usb/140160 usb [usb8] [acpi] USB ports are no longer "active" after A a usb/139990 usb [panic] [patch] [usb67] Kernel frequently panics after a usb/139598 usb [umass] [usb8] CAM reports "xptioctl: put "device pass o usb/139243 usb [uhci] [usb67] unplug prolific USB serial -> uhci_abor o usb/139142 usb [ehci] [usb8] [patch] ehci drivers (NVIDIA nForce4 USB o usb/138915 usb [patch] [usb8] [usb67] add support for SheevaPlug seri a usb/138904 usb [rum] [panic] [usb67] unpluging USB wifi card panics s f usb/138882 usb [ohci] [panic] [usb67] Can't install FreeBSD 7.2 due t a usb/138879 usb [uftdi] [patch] Patch to add support for CTI USB-Mini o usb/138798 usb [boot] [usb8] 8.0-BETA4 can't boot from USB flash driv o usb/138659 usb [usb8][uftdi] driver broken in RELENG_8/CURRENT o usb/138570 usb [usb] [panic] USB mass device panics current 7.2-STABL o usb/138175 usb [usb67] [boot] System cannot boot, when USB reader wit o usb/138172 usb [u3g] [patch] [usb67] Additional dev id for u3g (Optio o usb/138138 usb [u3g] [patch] [usb67] Novatel U760 for u3g (Verizon an o usb/138124 usb [usbaudio] [usb8] Axed uaudio functionality in the usb o usb/138119 usb [usb67] [usb8] MultiBay CDROM (probably on USB bus) is o usb/137872 usb [usb67] [boot] slow booting on usb flash drive f usb/137848 usb [panic] [usb67] Page fault when using an USB bluetooth o usb/137806 usb [ukbd] [usb67] USB keyboard doesn't work until it's un o usb/137763 usb [usb67][ukbd] Logitech wireless keyboard media keys no o usb/137616 usb [usb67][usb8][usbdevs] [patch]: usbdevs update: Please o usb/137377 usb [usb8] Support for Huawei E180 o usb/137341 usb [usb8][rum] driver if_rum doesn't work at all and thro p usb/137226 usb [usb67][patch] quirk for Philips extern USB disk o usb/137190 usb [usb8][patch] inhibit spurious button releases for som o usb/137189 usb [usb8][patch] create and use sysctl nodes for HID repo p usb/137188 usb [usb8][patch] correctly handle USB report descriptors f bin/137180 usb [build] [patch] building world for 8.0-BETA2 fails on o usb/137129 usb [ums] [usb8] SteelSeries Ikari USB laser mouse not att p usb/136761 usb [usbdevs][usb67][patch] Teach usbdevs / u3g(4) about H o usb/135938 usb [aue] [usb67] aue driver only passes traffic in promis f usb/135857 usb [urtw] [usb67] RTL8187 Wireless Adapter o usb/135575 usb [usbdevs] [patch] [usb67] Add HTC Wizard phone vid/pid o usb/135542 usb [keyboard] boot loader does not work with a usb keyboa p usb/135372 usb [usb67][umass] Quirk report for Teclast TL-C300 usb me o usb/135348 usb [umass] USB Drive Hangs with ZFS (JMicron USB2/eSata) o usb/135206 usb machine reboots when inserted USB device o usb/135200 usb SAMSUNG i740 usb mass: Synchronize cache failed, statu o usb/135182 usb UMASS quirk - Olympus FE20 camera o usb/134950 usb Lowering DTR for USB-modem via ubsa is not possible o usb/134633 usb Add support for WILLCOM03(SHARP smart phone) o usb/134631 usb [usbdevs] [patch] WiSPY DBx support requires usb tweak o usb/134299 usb Kernel Panic plugging in MF626 USB UMTS Stick u3g o usb/134193 usb System freeze on usb MP3 player insertion o usb/134117 usb [Patch] Add support for 'Option GlobeTrotter HSDPA Mod o usb/134085 usb [umass] Adding usb quirk for Sony USB flash drive o usb/133989 usb [newusb] [ukbd] USB keyboard dead at mountroot> prompt o usb/133712 usb [ural] [patch] RE: Fixed an issue with ural(4) that wa o usb/133390 usb umass crashes system in 7.1 when Olympus D-540 attache o usb/133296 usb [rum] driver not working properly in hostap mode p usb/132799 usb [usb][patch]GENESYS USB2IDE requires NO_SYNCHRONIZE_CA o usb/132785 usb [usb] [patch] Gemtech remote powersocket is classed as o usb/132594 usb USB subsystem causes page fault and crashes o usb/132312 usb Xorg 7.4 halts USB controller o usb/132080 usb [patch] [usb] [rum] Kernel panic after NOMEM caused by o usb/132066 usb [ukbd] Keyboard failure USB keyboard DELL 760 o usb/132036 usb [panic] page fault when connecting Olympus C740 camera o usb/131912 usb [uslcom] [patch] New devices using Silicon Labs chips o usb/131900 usb [usbdevs] [patch] Additional product identification co o usb/131583 usb [umass] Failure when detaching umass Device o usb/131576 usb [aue] ADMtek USB To LAN Converter can't send data o usb/131521 usb Registering Belkin UPS to usb_quirks.c o usb/131123 usb [patch] re-add UQ_ASSUME_CM_OVER_DATA USB quirk o usb/131074 usb no run-time detection of usb devices plugged into exte o usb/130736 usb Page fault unplugging USB stick o usb/130230 usb Samsung Electronics YP-U3 does not attach in 7.1-RELEA o usb/130208 usb Boot process severely hampered by umass0 error o usb/130122 usb [newusb] DVD drive detects as 'da' device o usb/129945 usb [usbdevs] [patch] add u3g support for Longcheer WM66 U o usb/129766 usb [usb] plugging in usb modem HUAWEI E226 panics system o usb/129758 usb [uftdi] [patch] add Pyramid LCD usb support o usb/129673 usb [uhci] uhci (uhub) confused on replugging USB 1.1 scan o usb/129522 usb [ubsa] [patch] add support for ZTE AC8700 modem o usb/129500 usb [umass] [panic] FreeBSD Crashes when connecting SanDis o usb/129311 usb [usb] [panic] Instant crash with an USB card reader o usb/129251 usb [usbdevs] [patch] Liebert UPS being assigned uhid and o usb/129173 usb [uplcom] [patch] Add support for Corega CG-USBRS232R a s usb/128990 usb [usb] u3g does not handle RTS/CTS available on for exa o usb/128977 usb [usb] [patch] uaudio is not full duplex o usb/128803 usb [usbdevs] [patch] Quirk for I-Tuner Networks USBLCD4X2 o usb/128485 usb [umodem] [patch] Nokia N80 modem support o usb/128425 usb [umass] Cannot Connect Maxtor Onetouch 4 USB drive o usb/128418 usb [panic] [rum] loading if_rum causes panic, looks like o usb/128324 usb [uplcom] [patch] remove baud rate restriction for PL23 o usb/127980 usb [umass] [patch] Fix Samsung YP U2 MP3 player on 7.x an o usb/127926 usb [boot] USB Timeout during bootup p usb/127549 usb [umass] [usb67] [patch] Meizu MiniPlayer M6 (SL) requi s usb/127453 usb [request] ubsa, uark, ubser, uftdi, and friends should o usb/127423 usb [boot] BTX halted on Gigabyte GA-MA69VM-S2 / AMD Sempr o usb/127342 usb [boot] [panic] enabling usb keyboard and mouse support o usb/127248 usb [ucom] panic while uplcom devices attaach and detach o usb/127222 usb [ohci] Regression in 7.0 usb storage generic driver o usb/126884 usb [ugen] [patch] Bug in buffer handling in ugen.c o usb/126848 usb [usb]: USB Keyboard hangs during Installation o usb/126740 usb [ulpt] doesn't work on 7.0-RELEASE, 10 second stall be o usb/126519 usb [usb] [panic] panic when plugging in an iphone o kern/126396 usb [panic] kernel panic after unplug USB Bluetooth device o usb/125736 usb [ukbd] [hang] system hangs after AT keyboard detect if o usb/125631 usb [ums] [panic] kernel panic during bootup while 'Logite o usb/125510 usb [panic] repeated plug and unplug of USB mass storage d o usb/125450 usb [panic] Removing USB flash card while being accessed c o usb/125238 usb [ums] Habu Mouse turns off in X o usb/125088 usb [keyboard] Touchpad not detected on Adesso AKB-430UG U o usb/124980 usb [panic] kernel panic on detaching unmounted umass devi o kern/124777 usb [ucom] USB cua devices don't revert to tty devices whe o usb/124758 usb [rum] [panic] rum panics SMP kernel o usb/124708 usb [panic] Kernel panic on USB KVM reattach o usb/124604 usb [ums] Microsoft combo wireless mouse doesn't work o kern/124130 usb [usb] gmirror fails to start usb devices that were pre o usb/123969 usb [usb] Supermicro H8SMi-2 usb problem: port reset faile o usb/123714 usb [usb] [panic] Panic when hald-storage-probe runs with o usb/123691 usb usbd(8): usbd hangs o usb/123690 usb [usb] [panic] Panic on USB device insertion when usb l o usb/123611 usb [usb] BBB reset failed, STALLED from Imation/Mitsumi U o usb/123509 usb [umass] continuous reset Samsung SGH-G600 phone o usb/123352 usb [usbdevs] [patch] Add Option GTMAX3.6/7.2 and Quallcom o usb/123351 usb [usbdevs] [patch] Add Reiner SCT cyberJack, Omnikey [2 o usb/122992 usb [umass] [patch] MotoROKR Z6 Phone not recognised by um o usb/122956 usb [ubsa] [patch] add support for Novatel Wireless XU870 o usb/122936 usb [ucom] [ubsa] Device does not receive interrupt o usb/122905 usb [ubsa] [patch] add Huawei E220 to ubsa o usb/122819 usb [usb] [patch] Patch to provide dynamic additions to th o usb/122813 usb [udbp] [request] udbp driver should be removed in favo o usb/122621 usb [new driver] [patch] New driver for Sierra Wireless 3G o usb/122547 usb [ehci] USB Printer not being recognized after reboot o usb/122539 usb [ohci] [panic] AnyDATA ADU-E1000D - kernel panic: ohci o usb/122483 usb [panic] [ulpt] Repeatable panic in 7.0-STABLE o usb/122119 usb [umass] umass device causes creation of daX but not da o usb/122025 usb [uscanner] [patch] uscanner does not attach to Epson R o usb/121755 usb [ohci] [patch] Fix panic after ohci/uhub cardbus devic o usb/121734 usb [ugen] ugen HP1022 printer device not working since up o usb/121708 usb [keyboard] nforce 650i mobo w/ usb keyboard infinite k o usb/121474 usb [cam] [patch] QUIRK: SAMSUNG HM250JI in LaCie usb hard o usb/121426 usb [patch] [uscanner] add HP ScanJet 3570C o usb/121275 usb [boot] [panic] FreeBSD fails to boot with usb legacy s o usb/121232 usb [usb] [panic] USB CardBus card removal causes reboot s p usb/121184 usb [uipaq] [patch] add ids from linux ipaq driver (plus a o usb/121169 usb [umass] Issues with usb mp3 player o usb/121045 usb [uftdi] [patch] Add support for PC-OP-RS1 and KURO-RS o usb/120786 usb [usb] [panic] Kernel panic when forced umount of a det o usb/120729 usb [panic] fault while in kernel mode with connecting USB o usb/120572 usb [umass] [patch] quirk to support ASUS P535 as umass (a o usb/120321 usb [hang] System hangs when transferring data to WD MyBoo o usb/120283 usb [panic] Automation reboot with wireless keyboard & mou o usb/120034 usb [hang] 6.2 & 6.3 hangs on boot at usb0: OHCI with 1.5 o usb/119981 usb [axe] [patch] add support for LOGITEC LAN-GTJ/U2 gigab o usb/119977 usb [ums] Mouse does not work in a Cherry-USB keyboard/mou o usb/119653 usb [cam] [patch] iriver s7 player sync cache error patch o usb/119633 usb [umass] umass0: BBB reset failed, IOERROR [regression] o usb/119513 usb [irq] inserting dlink dwl-g630 wireless card results i o usb/119509 usb [usb] USB flaky on Dell Optiplex 755 o usb/119481 usb [hang] FreeBSD not responding after connecting USB-Mas o usb/119389 usb [umass] Sony DSC-W1 CBI reset failed, STALLED [regress o usb/119227 usb [ubsa] [patch] ubsa buffer is too small; should be tun o usb/119201 usb [cam] [patch] Quirks for Olympus FE-210 camera, LG and o usb/118485 usb [usbdevs] [patch] Logitech Headset Workaround o usb/118480 usb [umass] Timeout in USB mass storage freezes vfs layer o usb/118353 usb [panic] [ppp] repeatable kernel panic during ppp(4) se o usb/118141 usb [ucom] usb serial and nokia phones ucomreadcb ucomread o usb/118140 usb [ucom] [patch] quick hack for ucom to get it behave wi o usb/118098 usb [umass] 6th gen iPod causes problems when disconnectin o usb/117955 usb [umass] [panic] inserting minolta dimage a2 crashes OS o usb/117946 usb [panic] D-Link DUB-E100 rev. B1 crashes FreeBSD 7.0-BE o usb/117938 usb [ums] [patch] Adding support for MS WL Natural and MS o usb/117911 usb [ums] [request] Mouse Gembird MUSWC not work o usb/117893 usb [umass] Lacie USB DVD writing failing o usb/117613 usb [uhci] [irq] uhci interrupt storm & USB leaked memory o usb/117598 usb [uaudio] [patch] Not possible to record with Plantroni o usb/117313 usb [umass] [panic] panic on usb camera insertion o usb/117200 usb [ugen] ugen0 prints strange string on attach if detach o usb/117183 usb [panic] USB/fusefs -- panic while transferring large a o usb/116947 usb [ukbd] [patch] [regression] enable boot protocol on th o usb/116699 usb [usbhid] USB HID devices do not initialize at system b o usb/116561 usb [umodem] [panic] RELENG_6 umodem panic "trying to slee o usb/116282 usb [ulpt] Cannot print on USB HP LJ1018 or LJ1300 o usb/115935 usb [usbdevs] [patch] kernel counterproductively attaches o usb/115933 usb [uftdi] [patch] RATOC REX-USB60F (usb serial converter o usb/115400 usb [ehci] Problem with EHCI on ASUS M2N4-SLI o usb/115298 usb [ulpt] [panic] Turning off USB printer panics kernel o usb/114916 usb [umass] [patch] USB Maxtor drive (L300RO) requires qui o kern/114780 usb [uplcom] [panic] Panics while stress testing the uplco o usb/114682 usb [umass] generic USB media-card reader unusable o usb/114310 usb [libusb] [patch] [panic] USB hub attachment panics ker o usb/114068 usb [usb67] [usb8] [umass] [patch] Problem with connection o conf/114013 usb [patch] WITHOUT_USB allow to compil a lot of USB stuff o usb/113060 usb [usb67] [ulpt] [patch] Samsung printer not working in o usb/110856 usb [usb67] [ugen] [patch] interrupt in msgs are truncated s usb/108344 usb [usb67] [atausb] [panic] kernel with atausb panics whe o usb/107827 usb [usb67] [ohci] [panic] ohci_add_done addr not found o usb/107388 usb [usb67] [usb8] [new driver] [patch] add utoppy device o usb/107243 usb [usb67] [cam] [quirk] [patch] Apacer USB Flash Drive q o usb/106041 usb [usb67] [usb8] [request] FreeBSD does not recognise Mu o usb/105361 usb [usb67] [panic] Kernel panic during unmounting mass st s usb/103917 usb [usb67] [uhub] USB driver reports "Addr 0 should never o usb/103418 usb [usb67] [usb8] [patch] [request] usbhidctl(8) add abil o usb/103046 usb [usb67] [ulpt] [patch] ulpt event driven I/O with sele o usb/101775 usb [usb67] [usb8] [libusbhid] [patch] possible error in r o usb/101761 usb [usb67] [patch] [request] usb.h: increase maximal size o usb/100746 usb [usb67] [ukbd] system does not boot due to USB keyboar o usb/99538 usb [keyboard] while using USB keyboard default params of o usb/99431 usb [keyboard] FreeBSD on MSI 6566E (Intel 845E motherboar o kern/99200 usb [bluetooth] SMP-Kernel crashes reliably when Bluetooth o usb/98343 usb [boot] BBB reset failed errors with Creative Muvo MP3 o usb/97472 usb [cam] [patch] add support for Olympus C150,D390 s usb/97286 usb [mouse] [request] MS Wireless Intellimouse Explorer 2. o usb/97175 usb [umass] [hang] USB cardreader hangs system o usb/96457 usb [umass] [panic] fatback on umass = reboot o usb/96381 usb [cam] [patch] add a quirk table entry for a flash ram o usb/96224 usb [usb] [msdosfs] mount_msdosfs cause page fault in sync s usb/96120 usb [ums] [request] USB mouse not always detected s usb/95636 usb [umass] [boot] 5 minute delay at boot when using VT620 o usb/95562 usb [umass] Write Stress in USB Mass drive causes "vinvalb s usb/95348 usb [keyboard] USB keyboard unplug causes noise on screen o usb/95037 usb [umass] USB disk not recognized on hot-plug. o usb/94897 usb [panic] Kernel Panic when cleanly unmounting USB disk o usb/94717 usb [ulpt] Reading from /dev/ulpt can break work of a UHCI o usb/94384 usb [panic] kernel panic with usb2 hardware o usb/93872 usb [cam] [patch] SCSI quirk required for ELTA 8061 OL USB o usb/93828 usb [ohci] [panic] ohci causes panic on boot (HP Pavillion o usb/93389 usb [umass] [patch] Digital Camera Pentax S60 don't work o usb/93155 usb [ulpt] /dev/ulpt0: device busy, USB printer does not w o usb/92852 usb [ums] [patch] Vertical scroll not working properly on o usb/92171 usb [panic] panic unplugging Vodafone Mobile Connect (UMTS o usb/92142 usb [uhub] SET_ADDR_FAILED and SHORT_XFER errors from usb o usb/92083 usb [ural] [panic] panic using WPA on ural NIC in 6.0-RELE o usb/92052 usb [ulpt] usbd causes defunct process with busy file-hand o usb/91906 usb [ehci] [hang] FreeBSD hangs while booting with USB leg o usb/91896 usb camcontrol(8): Serial Number of USB Memory Sticks is n o usb/91811 usb [umass] Compact Flash in HP Photosmart 2610 return " o usb/91629 usb [usb] usbd_abort_pipe() may result in infinite loop o usb/91546 usb [umodem] [patch] Nokia 6630 mobile phone does not work o usb/91538 usb [ulpt] [patch] Unable to print to EPSON CX3500 o usb/91283 usb [boot] [regression] booting very slow with usb devices o usb/91238 usb [umass] USB tape unit fails to write a second tape fil o usb/90700 usb [umass] [panic] Kernel panic on connect/mount/use umas o usb/89954 usb [umass] [panic] USB Disk driver race condition? s usb/89003 usb [request] LaCie Firewire drive not properly supported o usb/88743 usb [hang] [regression] USB makes kernel hang at boot (reg o usb/88408 usb [axe] axe0 read PHY failed o usb/87648 usb [mouse] Logitech USB-optical mouse problem. o usb/87224 usb [usb] Cannot mount USB Zip750 o usb/86767 usb [umass] [patch] bogus "slice starts beyond end of the o usb/86298 usb [mouse] Known good USB mouse won't work with correct s s usb/85067 usb [uscanner] Cannot attach ScanJet 4300C to usb device f usb/84750 usb [hang] 6-BETA2 reboot/shutdown with root_fs on externa s usb/84336 usb [usb] [reboot] instant system reboot when unmounting a o usb/83977 usb [ucom] [panic] ucom1: open bulk out error (addr 2): IN o usb/83863 usb [ugen] Communication problem between opensc/openct via o usb/83756 usb [ums] [patch] Microsoft Intellimouse Explorer 4.0A doe o usb/83563 usb [umass] [panic] Page Fault while detaching Mpman Usb d o usb/83504 usb [kernel] [patch] SpeedTouch USB stop working on recent o usb/82660 usb [ehci] [panic] EHCI: I/O stuck in state 'physrd'/panic s usb/82569 usb [umass] [panic] USB mass storage plug/unplug causes sy o usb/82520 usb [udbp] [reboot] Reboot when USL101 connected o usb/82350 usb [ucom] [panic] null pointer dereference in USB stack o usb/81621 usb [ehci] [hang] external hd hangs under load on ehci o usb/80935 usb [uvisor] [patch] uvisor.c is not work with CLIE TH55. o usb/80862 usb [patch] USB locking issues: missing some Giant calls o usb/80854 usb [patch] [request] suggestion for new iface-no-probe me o usb/80829 usb [modules] [panic] possible panic when loading USB-modu s usb/80777 usb [request] usb_rem_task() should wait for callback to c s usb/80776 usb [udav] [request] UDAV device driver shouldn't use usb_ o usb/80774 usb [patch] have "usbd_find_desc" in line with the other " o usb/80361 usb [umass] [patch] mounting of Dell usb-stick fails o usb/80040 usb [sound] [hang] Use of sound mixer causes system freeze o usb/79723 usb [usb] [request] prepare for high speed isochronous tra o usb/79722 usb [ehci] wrong alignments in ehci.h a usb/79656 usb [ehci] RHSC interrupts lost o usb/79524 usb [ulpt] printing to Minolta PagePro 1[23]xxW via USB fa o usb/79287 usb [uhci] [hang] UHCI hang after interrupt transfer o usb/79269 usb [ohci] USB ohci da0 plug/unplug causes crashes and loc o usb/78984 usb [umass] [patch] Creative MUVO umass failure o usb/77294 usb [ucom] [panic] ucom + ulpcom panic o usb/77184 usb [umass] [panic] kernel panic on USB device disconnect, o usb/76732 usb [ums] Mouse problems with USB KVM Switch o usb/76653 usb [umass] [patch] Problem with Asahi Optical usb device o usb/76461 usb [umass] disklabel of umass(4)-CAM(4)-da(4) not used by o usb/76395 usb [uhci] USB printer does not work, usbdevs says "addr 0 s usb/75928 usb [umass] [request] Cytronix SmartMedia card (SMC) reade o usb/75800 usb [ucom] ucom1: init failed STALLED error in time of syn o usb/75797 usb [sound] [regression] 5.3-STABLE(2005 1/4) detect USB h o usb/75764 usb [umass] [patch] "umass0: Phase Error" - no device for o usb/75705 usb [umass] [panic] da0 attach / Optio S4 (with backtrace) o usb/74771 usb [umass] [hang] mounting write-protected umass device a s usb/74453 usb [umass] [patch] Q-lity CD-RW USB ECW-043 (ScanLogic SL o usb/74211 usb [umass] USB flash drive causes CAM status 0x4 on 4.10R o usb/73307 usb [panic] Kernel panics on USB disconnect s usb/72733 usb [ucom] [request] Kyocera 7135 Palm OS connection probl o usb/71455 usb [umass] Slow USB umass performance of 5.3 o usb/71417 usb [ugen] Cryptoflex e-gate USB token (ugen0) communicati o usb/71416 usb [ugen] Cryptoflex e-gate USB token (ugen0) detach is n o usb/71280 usb [aue] aue0 device (linksys usb100tx) doesn't work in 1 o usb/71155 usb [ulpt] misbehaving usb-printer hangs processes, causes o usb/70523 usb [umct] [patch] umct sending/receiving wrong characters o usb/69006 usb [usbdevs] [patch] Apple Cinema Display hangs USB ports o usb/68232 usb [ugen] [patch] ugen(4) isochronous handling correction o usb/67301 usb [uftdi] [panic] RTS and system panic o usb/66547 usb [ucom] Palm Tungsten T USB does not initialize correct o usb/63621 usb [umass] [panic] USB MemoryStick Reader stalls/crashes s usb/62257 usb [umass] [request] card reader UCR-61S2B is only half-s o usb/59698 usb [keyboard] [patch] Rework of ukbd HID to AT code trans s bin/57255 usb [patch] usbd(8) and multi-function devices s usb/52026 usb [usb] [request] umass driver support for InSystem ISD2 s usb/51958 usb [urio] [patch] update for urio driver o i386/46371 usb USB controller cannot be initialized on IBM Netfinity o usb/40948 usb [umass] [request] USB HP CDW8200 does not work o usb/30929 usb [usb] [patch] use usbd to initialize USB ADSL modem 333 problems total. From owner-freebsd-usb@FreeBSD.ORG Mon Jan 4 16:38:26 2010 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0A0CA106566B for ; Mon, 4 Jan 2010 16:38:26 +0000 (UTC) (envelope-from wblock@wonkity.com) Received: from wonkity.com (wonkity.com [67.158.26.137]) by mx1.freebsd.org (Postfix) with ESMTP id B76458FC14 for ; Mon, 4 Jan 2010 16:38:25 +0000 (UTC) Received: from wonkity.com (localhost [127.0.0.1]) by wonkity.com (8.14.3/8.14.3) with ESMTP id o04GcLGQ005144; Mon, 4 Jan 2010 09:38:21 -0700 (MST) (envelope-from wblock@wonkity.com) Received: from localhost (wblock@localhost) by wonkity.com (8.14.3/8.14.3/Submit) with ESMTP id o04GcLjS005141; Mon, 4 Jan 2010 09:38:21 -0700 (MST) (envelope-from wblock@wonkity.com) Date: Mon, 4 Jan 2010 09:38:21 -0700 (MST) From: Warren Block To: Andrew Reilly In-Reply-To: <20100104030903.GA15746@duncan.reilly.home> Message-ID: References: <20100104030903.GA15746@duncan.reilly.home> User-Agent: Alpine 2.00 (BSF 1167 2008-08-23) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.2.3 (wonkity.com [127.0.0.1]); Mon, 04 Jan 2010 09:38:21 -0700 (MST) Cc: freebsd-usb@freebsd.org Subject: Re: Getting a scanner to work with new usb stack? X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 04 Jan 2010 16:38:26 -0000 On Mon, 4 Jan 2010, Andrew Reilly wrote: > For many years I've been happily (if only occasionally) > using an AGFA Snapscan e20 flat-bed USB scanner, using > xsane. This scanner (apparently) requires a "firmware > upload", which I had managed to arrange with this > line in /usr/local/etc/sane.d/snapscan.conf: > firmware /usr/local/share/sane/snapscan/snape20.bin > > I don't know whether or not that is (or is related to) the > problem, but it isn't working any more, and I've run out of > ideas to try, so thought I'd ask here. > > sane-find-scanner finds: > found USB scanner (vendor=0x06bd [AGFA ], product=0x2091 [SNAPSCAN]) at libusb:/dev/usb:/dev/ugen0.3 > # Your USB scanner was (probably) detected. It may or may not be supported by > # SANE. Try scanimage -L and read the backend's manpage. > > But no amount of scanimage -d spellings or SANE_DEFAULT_DEVICE > tweaking seems to make scanimage or xsane happy. > ("snapscan:/dev/uscanner0" used to be what I used.) > > For what it's worth, I'm running -current as of Saturday, and my > dmesg.boot says: > ugen0.3: at usbus0 snapscan.conf should have usb /dev/ugen0.3 (snapscan:libusb:/dev/usb:/dev/ugen0.3 from the command line, I think.) Need new 0660 permissions to ugen0.3 (or ugen*, or usb/*) in devfs.rules, too. -Warren Block * Rapid City, South Dakota USA From owner-freebsd-usb@FreeBSD.ORG Wed Jan 6 02:43:55 2010 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 88C31106566C for ; Wed, 6 Jan 2010 02:43:55 +0000 (UTC) (envelope-from freegih@gmail.com) Received: from mail-yx0-f172.google.com (mail-yx0-f172.google.com [209.85.210.172]) by mx1.freebsd.org (Postfix) with ESMTP id 42B858FC14 for ; Wed, 6 Jan 2010 02:43:55 +0000 (UTC) Received: by yxe2 with SMTP id 2so2315871yxe.7 for ; Tue, 05 Jan 2010 18:43:52 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from :user-agent:mime-version:to:subject:references:content-type :content-transfer-encoding; bh=7cMU+Qe9DxzkgLyf/v9Aj3gEdNZI+ANIhEfVtCb7vBY=; b=Zo1bJ/sgSI3MJXqZzAWbNfAwFSVNdzm/ZtgHxK2gqpjvSdz0r3c/e340C2Y9njb88G nvY0GFe7ksPn5L8OGQy5+1lwWphBWfvoRl0b+jZym5t5sCVm/RijnMFQMQvT7ErNrZk0 P0DW5sTLlEtqWc+q/dosrPx0TH+E0+XTFwhSk= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:user-agent:mime-version:to:subject:references :content-type:content-transfer-encoding; b=XtcR6FcofubJttJYos7EYjMApD9Ql+n3AnM8vCxRWOSn3AxrW8LOp++F4dAj4thxMa ifbpdAsy+foAejnMaBA7ZojnhfhD/DhCZLiePj5o8kP3OD+pHpiCbw6w/Opc6UX8RSrf 9Pjg2tMCIp6FMs32Fw0nQDvkivv9F4XmItsoI= Received: by 10.150.25.34 with SMTP id 34mr38989504yby.209.1262744312658; Tue, 05 Jan 2010 18:18:32 -0800 (PST) Received: from ?192.168.1.7? ([221.179.0.11]) by mx.google.com with ESMTPS id 39sm8117677yxd.63.2010.01.05.18.18.30 (version=SSLv3 cipher=RC4-MD5); Tue, 05 Jan 2010 18:18:31 -0800 (PST) Message-ID: <4B43F2F8.5030806@gmail.com> Date: Wed, 06 Jan 2010 10:18:32 +0800 From: jerry User-Agent: Thunderbird 2.0.0.22 (Windows/20090605) MIME-Version: 1.0 To: freebsd-usb@freebsd.org References: 200803061756.01227.hselasky@c2i.net Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit X-Mailman-Approved-At: Wed, 06 Jan 2010 04:35:17 +0000 Subject: Utility to Suspend/Disable/Enable Power Off USB ports X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 06 Jan 2010 02:43:55 -0000 Hi, I am very happy to run "upower" on my laptop installed freebsd 7.2. But can you make upower run on freebsd8? Thank you! From owner-freebsd-usb@FreeBSD.ORG Wed Jan 6 08:29:22 2010 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E531D106566C for ; Wed, 6 Jan 2010 08:29:22 +0000 (UTC) (envelope-from hselasky@c2i.net) Received: from swip.net (mailfe10.swip.net [212.247.155.33]) by mx1.freebsd.org (Postfix) with ESMTP id 76DA98FC0C for ; Wed, 6 Jan 2010 08:29:21 +0000 (UTC) X-Cloudmark-Score: 0.000000 [] X-Cloudmark-Analysis: v=1.0 c=1 a=zATFyLyXLKIA:10 a=MnI1ikcADjEx7bvsp0jZvQ==:17 a=HqCdgB7iB534zVhHW-EA:9 a=PWMnIqNkouMeU99SWGODopgTJrIA:4 Received: from [188.126.201.140] (account mc467741@c2i.net HELO laptop002.hselasky.homeunix.org) by mailfe10.swip.net (CommuniGate Pro SMTP 5.2.16) with ESMTPA id 1160936957; Wed, 06 Jan 2010 09:29:20 +0100 From: Hans Petter Selasky To: freebsd-usb@freebsd.org Date: Wed, 6 Jan 2010 09:27:59 +0100 User-Agent: KMail/1.12.4 (FreeBSD/8.0-STABLE; KDE/4.3.4; amd64; ; ) References: <4B43F2F8.5030806@gmail.com> In-Reply-To: <4B43F2F8.5030806@gmail.com> X-Face: +~\`s("[*|O,="7?X@L.elg*F"OA\I/3%^p8g?ab%RN'(; _IjlA: hGE..Ew, XAQ*o#\/M~SC=S1-f9{EzRfT'|Hhll5Q]ha5Bt-s|oTlKMusi:1e[wJl}kd}GR Z0adGx-x_0zGbZj'e(Y[(UNle~)8CQWXW@:DX+9)_YlB[tIccCPN$7/L' MIME-Version: 1.0 Content-Type: Text/Plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <201001060927.59163.hselasky@c2i.net> Cc: jerry Subject: Re: Utility to Suspend/Disable/Enable Power Off USB ports X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 06 Jan 2010 08:29:23 -0000 On Wednesday 06 January 2010 03:18:32 jerry wrote: > Hi, > I am very happy to run "upower" on my laptop installed freebsd 7.2. > But can you make upower run on freebsd8? > Thank you! usbconfig -h --HPS From owner-freebsd-usb@FreeBSD.ORG Wed Jan 6 14:06:12 2010 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2A5151065672; Wed, 6 Jan 2010 14:06:12 +0000 (UTC) (envelope-from pjd@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 02E018FC1C; Wed, 6 Jan 2010 14:06:12 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id o06E6BDg030740; Wed, 6 Jan 2010 14:06:11 GMT (envelope-from pjd@freefall.freebsd.org) Received: (from pjd@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id o06E6BYP030736; Wed, 6 Jan 2010 14:06:11 GMT (envelope-from pjd) Date: Wed, 6 Jan 2010 14:06:11 GMT Message-Id: <201001061406.o06E6BYP030736@freefall.freebsd.org> To: pjd@FreeBSD.org, freebsd-geom@FreeBSD.org, freebsd-usb@FreeBSD.org From: pjd@FreeBSD.org Cc: Subject: Re: kern/141011: [usb] Encrypted root, geli password at boot; enter key never released X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 06 Jan 2010 14:06:12 -0000 Old Synopsis: [geli] Encrypted root, geli password at boot; enter key never released New Synopsis: [usb] Encrypted root, geli password at boot; enter key never released Responsible-Changed-From-To: freebsd-geom->freebsd-usb Responsible-Changed-By: pjd Responsible-Changed-When: śro 6 sty 2010 14:04:41 UTC Responsible-Changed-Why: The problem is more related to USB and ukbd than to GEOM or GELI. http://www.freebsd.org/cgi/query-pr.cgi?pr=141011 From owner-freebsd-usb@FreeBSD.ORG Wed Jan 6 18:49:10 2010 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4EF6C106566B for ; Wed, 6 Jan 2010 18:49:10 +0000 (UTC) (envelope-from hselasky@c2i.net) Received: from swip.net (mailfe13.tele2.se [212.247.155.129]) by mx1.freebsd.org (Postfix) with ESMTP id D40A48FC16 for ; Wed, 6 Jan 2010 18:49:09 +0000 (UTC) X-Cloudmark-Score: 0.000000 [] X-Cloudmark-Analysis: v=1.0 c=1 a=l0Z3a6eDwrsA:10 a=MnI1ikcADjEx7bvsp0jZvQ==:17 a=9-jiUW4E0qe9tGgOE28A:9 a=RFOUfqkwn-V-ZtF5_wwkk0hH76QA:4 Received: from [188.126.201.140] (account mc467741@c2i.net HELO laptop002.hselasky.homeunix.org) by mailfe13.swip.net (CommuniGate Pro SMTP 5.2.16) with ESMTPA id 974609686 for freebsd-usb@freebsd.org; Wed, 06 Jan 2010 19:49:08 +0100 From: Hans Petter Selasky To: freebsd-usb@freebsd.org Date: Wed, 6 Jan 2010 19:47:47 +0100 User-Agent: KMail/1.12.4 (FreeBSD/8.0-STABLE; KDE/4.3.4; amd64; ; ) References: <201001061406.o06E6BYP030736@freefall.freebsd.org> <20100106175041.GA1719@garage.freebsd.pl> <201001061945.38199.hselasky@freebsd.org> In-Reply-To: <201001061945.38199.hselasky@freebsd.org> X-Face: +~\`s("[*|O,="7?X@L.elg*F"OA\I/3%^p8g?ab%RN'(; _IjlA: hGE..Ew, XAQ*o#\/M~SC=S1-f9{EzRfT'|Hhll5Q]ha5Bt-s|oTlKMusi:1e[wJl}kd}GR Z0adGx-x_0zGbZj'e(Y[(UNle~)8CQWXW@:DX+9)_YlB[tIccCPN$7/L' MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit Message-Id: <201001061947.47056.hselasky@c2i.net> Subject: Re: kern/141011: [usb] Encrypted root, geli password at boot; enter key never released X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 06 Jan 2010 18:49:10 -0000 On Wednesday 06 January 2010 19:45:38 Hans Petter Selasky wrote: > On Wednesday 06 January 2010 18:50:41 Pawel Jakub Dawidek wrote: > > On Wed, Jan 06, 2010 at 03:21:03PM +0100, Hans Petter Selasky wrote: > > > > Old Synopsis: [geli] Encrypted root, geli password at boot; enter key > > > > never released New Synopsis: [usb] Encrypted root, geli password at > > > > boot; enter key never released > > > Hi, Could you try to comment it out: /* read and discard the input, no one is waiting for it */ do { c = ukbd_read_char(&sc->sc_kbd, 0); } while (c != NOKEY); In "ukbd_interrupt()" in "src/sys/dev/usb/input/ukbd.c" ? --HPS From owner-freebsd-usb@FreeBSD.ORG Wed Jan 6 19:50:05 2010 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 08559106566C for ; Wed, 6 Jan 2010 19:50:05 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id EB0178FC16 for ; Wed, 6 Jan 2010 19:50:04 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id o06Jo4L4024460 for ; Wed, 6 Jan 2010 19:50:04 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id o06Jo4jF024459; Wed, 6 Jan 2010 19:50:04 GMT (envelope-from gnats) Date: Wed, 6 Jan 2010 19:50:04 GMT Message-Id: <201001061950.o06Jo4jF024459@freefall.freebsd.org> To: freebsd-usb@FreeBSD.org From: Hans Petter Selasky Cc: Subject: Re: kern/141011: [usb] Encrypted root, geli password at boot; enter key never released X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Hans Petter Selasky List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 06 Jan 2010 19:50:05 -0000 The following reply was made to PR kern/141011; it has been noted by GNATS. From: Hans Petter Selasky To: freebsd-gnats-submit@freebsd.org Cc: Subject: Re: kern/141011: [usb] Encrypted root, geli password at boot; enter key never released Date: Wed, 6 Jan 2010 19:45:38 +0100 On Wednesday 06 January 2010 18:50:41 Pawel Jakub Dawidek wrote: > On Wed, Jan 06, 2010 at 03:21:03PM +0100, Hans Petter Selasky wrote: > > > Old Synopsis: [geli] Encrypted root, geli password at boot; enter key > > > never released New Synopsis: [usb] Encrypted root, geli password at > > > boot; enter key never released > > > > Hi, > > > > Could you try to comment out: > > > > /* read and discard the input, no one is waiting for it > > */ do { > > c = ukbd_read_char(&sc->sc_kbd, 0); > > } while (c != NOKEY); > > > > In "ukbd_interrupt()" in "src/sys/dev/usb/input/ukbd.c" ? > --HPS From owner-freebsd-usb@FreeBSD.ORG Wed Jan 6 20:30:07 2010 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2368A1065679 for ; Wed, 6 Jan 2010 20:30:07 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id D79BF8FC18 for ; Wed, 6 Jan 2010 20:30:06 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id o06KU6Cq058210 for ; Wed, 6 Jan 2010 20:30:06 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id o06KU61M058207; Wed, 6 Jan 2010 20:30:06 GMT (envelope-from gnats) Resent-Date: Wed, 6 Jan 2010 20:30:06 GMT Resent-Message-Id: <201001062030.o06KU61M058207@freefall.freebsd.org> Resent-From: FreeBSD-gnats-submit@FreeBSD.org (GNATS Filer) Resent-To: freebsd-usb@FreeBSD.org Resent-Reply-To: FreeBSD-gnats-submit@FreeBSD.org, Andrew Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 65B4B1065693 for ; Wed, 6 Jan 2010 20:26:04 +0000 (UTC) (envelope-from nobody@FreeBSD.org) Received: from www.freebsd.org (www.freebsd.org [IPv6:2001:4f8:fff6::21]) by mx1.freebsd.org (Postfix) with ESMTP id 3B8258FC23 for ; Wed, 6 Jan 2010 20:26:04 +0000 (UTC) Received: from www.freebsd.org (localhost [127.0.0.1]) by www.freebsd.org (8.14.3/8.14.3) with ESMTP id o06KQ3Vb043831 for ; Wed, 6 Jan 2010 20:26:03 GMT (envelope-from nobody@www.freebsd.org) Received: (from nobody@localhost) by www.freebsd.org (8.14.3/8.14.3/Submit) id o06KQ3VP043830; Wed, 6 Jan 2010 20:26:03 GMT (envelope-from nobody) Message-Id: <201001062026.o06KQ3VP043830@www.freebsd.org> Date: Wed, 6 Jan 2010 20:26:03 GMT From: Andrew To: freebsd-gnats-submit@FreeBSD.org X-Send-Pr-Version: www-3.1 Cc: Subject: usb/142387: Netgear WPN111 not recognised by uath(4) after uathload X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 06 Jan 2010 20:30:07 -0000 >Number: 142387 >Category: usb >Synopsis: Netgear WPN111 not recognised by uath(4) after uathload >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-usb >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Jan 06 20:30:06 UTC 2010 >Closed-Date: >Last-Modified: >Originator: Andrew >Release: 8-STABLE >Organization: >Environment: FreeBSD XXXXXX 8.0-STABLE FreeBSD 8.0-STABLE #2: Tue Jan 5 21:34:37 GMT 2010 root@XXXXXX:/usr/obj/usr/src/sys/GENERIC amd64 >Description: After running uathload the device changes from: ugen3.2: at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x00ff bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x1385 idProduct = 0x5f01 bcdDevice = 0x0001 iManufacturer = 0x0001 iProduct = 0x0002 iSerialNumber = 0x0003 <1.0> bNumConfigurations = 0x0001 to: ugen3.2: at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x00ff bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x1385 idProduct = 0x5f02 bcdDevice = 0x0001 iManufacturer = 0x0001 iProduct = 0x0002 iSerialNumber = 0x0003 <1.0> bNumConfigurations = 0x0001 Note: idProduct 0x5f01 -> 0x5f02 rather than 0x5f00 >How-To-Repeat: Connect a Netgear WPN111, run uathload -d /dev/ugenX.X >Fix: Correct sys/dev/usb/usbdevs product id for WPN111 with firmware, patch attached. uath now attachs: dmesg: ugen3.2: at usbus3 (disconnected) ugen3.2: at usbus3 uath0: on usbus3 ifconfig uath0 uath0: flags=8802 metric 0 mtu 2290 ether 00:14:6c:ea:81:a4 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier Patch attached with submission follows: --- usbdevs.orig 2010-01-06 20:15:02.000000000 +0000 +++ usbdevs 2010-01-05 21:28:03.000000000 +0000 @@ -2005,8 +2005,8 @@ product NETGEAR2 MA101B 0x4102 MA101 Rev B product NETGEAR3 WG111T 0x4250 WG111T product NETGEAR3 WG111T_NF 0x4251 WG111T (no firmware) -product NETGEAR3 WPN111 0x5f00 WPN111 product NETGEAR3 WPN111_NF 0x5f01 WPN111 (no firmware) +product NETGEAR3 WPN111 0x5f02 WPN111 /* Nikon products */ product NIKON E990 0x0102 Digital Camera E990 >Release-Note: >Audit-Trail: >Unformatted: From owner-freebsd-usb@FreeBSD.ORG Wed Jan 6 20:45:20 2010 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B08B7106566B; Wed, 6 Jan 2010 20:45:20 +0000 (UTC) (envelope-from hselasky@c2i.net) Received: from swip.net (mailfe08.swip.net [212.247.154.225]) by mx1.freebsd.org (Postfix) with ESMTP id DC4348FC14; Wed, 6 Jan 2010 20:45:19 +0000 (UTC) X-Cloudmark-Score: 0.000000 [] X-Cloudmark-Analysis: v=1.0 c=1 a=cKvUccZAUOsA:10 a=MnI1ikcADjEx7bvsp0jZvQ==:17 a=UVxhYP5cfBXfv9_CR5MA:9 a=8C0KMRpsC9dvYLjT5iMA:7 a=7ObviWczlVlMQjZrNfKhbP1mYssA:4 Received: from [188.126.201.140] (account mc467741@c2i.net HELO laptop002.hselasky.homeunix.org) by mailfe08.swip.net (CommuniGate Pro SMTP 5.2.16) with ESMTPA id 1326423888; Wed, 06 Jan 2010 21:45:17 +0100 From: Hans Petter Selasky To: freebsd-usb@freebsd.org Date: Wed, 6 Jan 2010 21:43:56 +0100 User-Agent: KMail/1.12.4 (FreeBSD/8.0-STABLE; KDE/4.3.4; amd64; ; ) References: <201001062026.o06KQ3VP043830@www.freebsd.org> In-Reply-To: <201001062026.o06KQ3VP043830@www.freebsd.org> X-Face: +~\`s("[*|O,="7?X@L.elg*F"OA\I/3%^p8g?ab%RN'(; _IjlA: hGE..Ew, XAQ*o#\/M~SC=S1-f9{EzRfT'|Hhll5Q]ha5Bt-s|oTlKMusi:1e[wJl}kd}GR Z0adGx-x_0zGbZj'e(Y[(UNle~)8CQWXW@:DX+9)_YlB[tIccCPN$7/L' MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit Message-Id: <201001062143.56029.hselasky@c2i.net> Cc: Andrew , freebsd-gnats-submit@freebsd.org Subject: Re: usb/142387: Netgear WPN111 not recognised by uath(4) after uathload X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 06 Jan 2010 20:45:20 -0000 On Wednesday 06 January 2010 21:26:03 Andrew wrote: > >Number: 142387 > >Category: usb > >Synopsis: Netgear WPN111 not recognised by uath(4) after uathload > >Confidential: no > >Severity: non-critical > >Priority: low > >Responsible: freebsd-usb > >State: open > >Quarter: > >Keywords: > >Date-Required: > >Class: sw-bug > >Submitter-Id: current-users > >Arrival-Date: Wed Jan 06 20:30:06 UTC 2010 > >Closed-Date: > >Last-Modified: > >Originator: Andrew > >Release: 8-STABLE > >Organization: > >Environment: > > FreeBSD XXXXXX 8.0-STABLE FreeBSD 8.0-STABLE #2: Tue Jan 5 21:34:37 GMT > 2010 root@XXXXXX:/usr/obj/usr/src/sys/GENERIC amd64 > > >Description: > > After running uathload the device changes from: > ugen3.2: at usbus3, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=ON > > bLength = 0x0012 > bDescriptorType = 0x0001 > bcdUSB = 0x0200 > bDeviceClass = 0x00ff > bDeviceSubClass = 0x0000 > bDeviceProtocol = 0x0000 > bMaxPacketSize0 = 0x0040 > idVendor = 0x1385 > idProduct = 0x5f01 > bcdDevice = 0x0001 > iManufacturer = 0x0001 > iProduct = 0x0002 > iSerialNumber = 0x0003 <1.0> > bNumConfigurations = 0x0001 > to: > ugen3.2: at usbus3, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=ON > > bLength = 0x0012 > bDescriptorType = 0x0001 > bcdUSB = 0x0200 > bDeviceClass = 0x00ff > bDeviceSubClass = 0x0000 > bDeviceProtocol = 0x0000 > bMaxPacketSize0 = 0x0040 > idVendor = 0x1385 > idProduct = 0x5f02 > bcdDevice = 0x0001 > iManufacturer = 0x0001 > iProduct = 0x0002 > iSerialNumber = 0x0003 <1.0> > bNumConfigurations = 0x0001 > > Note: idProduct 0x5f01 -> 0x5f02 rather than 0x5f00 > > >How-To-Repeat: > > Connect a Netgear WPN111, run uathload -d /dev/ugenX.X > > >Fix: > > Correct sys/dev/usb/usbdevs product id for WPN111 with firmware, patch > attached. > > uath now attachs: > > dmesg: > ugen3.2: at usbus3 (disconnected) > ugen3.2: at usbus3 > uath0: on usbus3 > > > ifconfig uath0 > uath0: flags=8802 metric 0 mtu 2290 > ether 00:14:6c:ea:81:a4 > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > status: no carrier > > > Patch attached with submission follows: > > --- usbdevs.orig 2010-01-06 20:15:02.000000000 +0000 > +++ usbdevs 2010-01-05 21:28:03.000000000 +0000 > @@ -2005,8 +2005,8 @@ > product NETGEAR2 MA101B 0x4102 MA101 Rev B > product NETGEAR3 WG111T 0x4250 WG111T > product NETGEAR3 WG111T_NF 0x4251 WG111T (no firmware) > -product NETGEAR3 WPN111 0x5f00 WPN111 > product NETGEAR3 WPN111_NF 0x5f01 WPN111 (no firmware) > +product NETGEAR3 WPN111 0x5f02 WPN111 > > /* Nikon products */ > product NIKON E990 0x0102 Digital Camera E990 > > >Release-Note: > >Audit-Trail: > >Unformatted: Hi, Are you certain that product "0x5f00" is incorrect and that we shouldn't add the new product, 0x5f02 instead? --HPS From owner-freebsd-usb@FreeBSD.ORG Wed Jan 6 20:50:10 2010 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 256151065695 for ; Wed, 6 Jan 2010 20:50:10 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id EFBCA8FC0A for ; Wed, 6 Jan 2010 20:50:09 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id o06Ko9xj076676 for ; Wed, 6 Jan 2010 20:50:09 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id o06Ko92J076669; Wed, 6 Jan 2010 20:50:09 GMT (envelope-from gnats) Date: Wed, 6 Jan 2010 20:50:09 GMT Message-Id: <201001062050.o06Ko92J076669@freefall.freebsd.org> To: freebsd-usb@FreeBSD.org From: Hans Petter Selasky Cc: Subject: Re: usb/142387: Netgear WPN111 not recognised by uath(4) after uathload X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Hans Petter Selasky List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 06 Jan 2010 20:50:10 -0000 The following reply was made to PR usb/142387; it has been noted by GNATS. From: Hans Petter Selasky To: freebsd-usb@freebsd.org Cc: Andrew , freebsd-gnats-submit@freebsd.org Subject: Re: usb/142387: Netgear WPN111 not recognised by uath(4) after uathload Date: Wed, 6 Jan 2010 21:43:56 +0100 On Wednesday 06 January 2010 21:26:03 Andrew wrote: > >Number: 142387 > >Category: usb > >Synopsis: Netgear WPN111 not recognised by uath(4) after uathload > >Confidential: no > >Severity: non-critical > >Priority: low > >Responsible: freebsd-usb > >State: open > >Quarter: > >Keywords: > >Date-Required: > >Class: sw-bug > >Submitter-Id: current-users > >Arrival-Date: Wed Jan 06 20:30:06 UTC 2010 > >Closed-Date: > >Last-Modified: > >Originator: Andrew > >Release: 8-STABLE > >Organization: > >Environment: > > FreeBSD XXXXXX 8.0-STABLE FreeBSD 8.0-STABLE #2: Tue Jan 5 21:34:37 GMT > 2010 root@XXXXXX:/usr/obj/usr/src/sys/GENERIC amd64 > > >Description: > > After running uathload the device changes from: > ugen3.2: at usbus3, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=ON > > bLength = 0x0012 > bDescriptorType = 0x0001 > bcdUSB = 0x0200 > bDeviceClass = 0x00ff > bDeviceSubClass = 0x0000 > bDeviceProtocol = 0x0000 > bMaxPacketSize0 = 0x0040 > idVendor = 0x1385 > idProduct = 0x5f01 > bcdDevice = 0x0001 > iManufacturer = 0x0001 > iProduct = 0x0002 > iSerialNumber = 0x0003 <1.0> > bNumConfigurations = 0x0001 > to: > ugen3.2: at usbus3, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=ON > > bLength = 0x0012 > bDescriptorType = 0x0001 > bcdUSB = 0x0200 > bDeviceClass = 0x00ff > bDeviceSubClass = 0x0000 > bDeviceProtocol = 0x0000 > bMaxPacketSize0 = 0x0040 > idVendor = 0x1385 > idProduct = 0x5f02 > bcdDevice = 0x0001 > iManufacturer = 0x0001 > iProduct = 0x0002 > iSerialNumber = 0x0003 <1.0> > bNumConfigurations = 0x0001 > > Note: idProduct 0x5f01 -> 0x5f02 rather than 0x5f00 > > >How-To-Repeat: > > Connect a Netgear WPN111, run uathload -d /dev/ugenX.X > > >Fix: > > Correct sys/dev/usb/usbdevs product id for WPN111 with firmware, patch > attached. > > uath now attachs: > > dmesg: > ugen3.2: at usbus3 (disconnected) > ugen3.2: at usbus3 > uath0: on usbus3 > > > ifconfig uath0 > uath0: flags=8802 metric 0 mtu 2290 > ether 00:14:6c:ea:81:a4 > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > status: no carrier > > > Patch attached with submission follows: > > --- usbdevs.orig 2010-01-06 20:15:02.000000000 +0000 > +++ usbdevs 2010-01-05 21:28:03.000000000 +0000 > @@ -2005,8 +2005,8 @@ > product NETGEAR2 MA101B 0x4102 MA101 Rev B > product NETGEAR3 WG111T 0x4250 WG111T > product NETGEAR3 WG111T_NF 0x4251 WG111T (no firmware) > -product NETGEAR3 WPN111 0x5f00 WPN111 > product NETGEAR3 WPN111_NF 0x5f01 WPN111 (no firmware) > +product NETGEAR3 WPN111 0x5f02 WPN111 > > /* Nikon products */ > product NIKON E990 0x0102 Digital Camera E990 > > >Release-Note: > >Audit-Trail: > >Unformatted: Hi, Are you certain that product "0x5f00" is incorrect and that we shouldn't add the new product, 0x5f02 instead? --HPS From owner-freebsd-usb@FreeBSD.ORG Thu Jan 7 00:34:18 2010 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DED291065692; Thu, 7 Jan 2010 00:34:18 +0000 (UTC) (envelope-from thompsa@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id B61AE8FC0C; Thu, 7 Jan 2010 00:34:18 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id o070YI7x076631; Thu, 7 Jan 2010 00:34:18 GMT (envelope-from thompsa@freefall.freebsd.org) Received: (from thompsa@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id o070YIdg076627; Thu, 7 Jan 2010 00:34:18 GMT (envelope-from thompsa) Date: Thu, 7 Jan 2010 00:34:18 GMT Message-Id: <201001070034.o070YIdg076627@freefall.freebsd.org> To: thomasmward@fastmail.fm, thompsa@FreeBSD.org, freebsd-usb@FreeBSD.org, thompsa@FreeBSD.org From: thompsa@FreeBSD.org Cc: Subject: Re: usb/142225: [patch] Patch to add Quirk for Western Digital Mybook X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 07 Jan 2010 00:34:19 -0000 Synopsis: [patch] Patch to add Quirk for Western Digital Mybook State-Changed-From-To: open->patched State-Changed-By: thompsa State-Changed-When: Thu Jan 7 00:33:22 UTC 2010 State-Changed-Why: Committed, thanks! Responsible-Changed-From-To: freebsd-usb->thompsa Responsible-Changed-By: thompsa Responsible-Changed-When: Thu Jan 7 00:33:22 UTC 2010 Responsible-Changed-Why: Committed, thanks! http://www.freebsd.org/cgi/query-pr.cgi?pr=142225 From owner-freebsd-usb@FreeBSD.ORG Thu Jan 7 00:35:14 2010 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D36BA1065694; Thu, 7 Jan 2010 00:35:14 +0000 (UTC) (envelope-from thompsa@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id A997B8FC21; Thu, 7 Jan 2010 00:35:14 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id o070ZEtn076693; Thu, 7 Jan 2010 00:35:14 GMT (envelope-from thompsa@freefall.freebsd.org) Received: (from thompsa@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id o070ZE87076689; Thu, 7 Jan 2010 00:35:14 GMT (envelope-from thompsa) Date: Thu, 7 Jan 2010 00:35:14 GMT Message-Id: <201001070035.o070ZE87076689@freefall.freebsd.org> To: goto@on-link.jp, thompsa@FreeBSD.org, freebsd-usb@FreeBSD.org, thompsa@FreeBSD.org From: thompsa@FreeBSD.org Cc: Subject: Re: usb/142228: [usbdevs] [patch] add a USB-HDD to usb_quirk.c and usbdevs X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 07 Jan 2010 00:35:14 -0000 Synopsis: [usbdevs] [patch] add a USB-HDD to usb_quirk.c and usbdevs State-Changed-From-To: open->patched State-Changed-By: thompsa State-Changed-When: Thu Jan 7 00:34:37 UTC 2010 State-Changed-Why: Committed, thanks! Responsible-Changed-From-To: freebsd-usb->thompsa Responsible-Changed-By: thompsa Responsible-Changed-When: Thu Jan 7 00:34:37 UTC 2010 Responsible-Changed-Why: Committed, thanks! http://www.freebsd.org/cgi/query-pr.cgi?pr=142228 From owner-freebsd-usb@FreeBSD.ORG Thu Jan 7 04:25:14 2010 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A98751065672 for ; Thu, 7 Jan 2010 04:25:14 +0000 (UTC) (envelope-from doconnor@gsoft.com.au) Received: from cain.gsoft.com.au (cain.gsoft.com.au [203.31.81.10]) by mx1.freebsd.org (Postfix) with ESMTP id E55168FC17 for ; Thu, 7 Jan 2010 04:25:13 +0000 (UTC) Received: from inchoate.gsoft.com.au ([203.31.81.30]) (authenticated bits=0) by cain.gsoft.com.au (8.13.8/8.13.8) with ESMTP id o074OnEs085996 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES128-SHA bits=128 verify=NO); Thu, 7 Jan 2010 14:55:05 +1030 (CST) (envelope-from doconnor@gsoft.com.au) From: "Daniel O'Connor" To: Hans Petter Selasky Date: Thu, 7 Jan 2010 14:54:45 +1030 User-Agent: KMail/1.9.10 References: <200912251137.43667.doconnor@gsoft.com.au> <200912252058.58879.doconnor@gsoft.com.au> <200912251244.46651.hselasky@c2i.net> In-Reply-To: <200912251244.46651.hselasky@c2i.net> MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart2827689.JiVFfemQix"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <201001071454.47314.doconnor@gsoft.com.au> X-Spam-Score: -3.626 () ALL_TRUSTED,AWL,BAYES_00 X-Scanned-By: MIMEDefang 2.63 on 203.31.81.10 Cc: freebsd-usb@freebsd.org Subject: Re: libusb-config missing? X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 07 Jan 2010 04:25:14 -0000 --nextPart2827689.JiVFfemQix Content-Type: multipart/mixed; boundary="Boundary-01=_PIWRLgoRtOrJjxT" Content-Transfer-Encoding: 7bit Content-Disposition: inline --Boundary-01=_PIWRLgoRtOrJjxT Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Fri, 25 Dec 2009, Hans Petter Selasky wrote: > On Friday 25 December 2009 11:28:51 Daniel O'Connor wrote: > > On Fri, 25 Dec 2009, Hans Petter Selasky wrote: > > > On Friday 25 December 2009 02:07:42 Daniel O'Connor wrote: > > > > Would it be possible to create a libusb-config shell script and > > > > install it in /usr/bin? > > Can you provide a pseudo-libusb port patch for this? I've attached a shar and there is this.. diff -ur /usr/ports/devel/libusb/Makefile libusb/Makefile =2D-- /usr/ports/devel/libusb/Makefile 2009-08-22 09:48:15.000000000 +09= 30 +++ libusb/Makefile 2010-01-07 14:52:57.000000000 +1030 @@ -16,6 +16,8 @@ OPTIONS=3D SGML "Install developer guide from SGML" off +CONFLICTS=3D libusb_base-* + .include .if ${OSVERSION} >=3D 800069 Although I think it's mostly unecessary due to the OSVERSION check. One problem is that ports don't know which version to use, it would be nice= =20 if they could just depend on devel/libusb and Magic Happened (tm) to pick the correct thing. Unfortunately that is beyond my port fu :( =2D-=20 Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C --Boundary-01=_PIWRLgoRtOrJjxT Content-Type: text/plain; charset="iso 8859-15"; name="libusb_base.shar" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="libusb_base.shar" # This is a shell archive. Save it in a file, remove anything before # this line, and then unpack it by entering "sh file". Note, it may # create directories; files and directories will be owned by you and # have default permissions. # # This archive contains: # # libusb_base # libusb_base/Makefile # libusb_base/files # libusb_base/files/libusb-config # libusb_base/files/libusb.pc # libusb_base/pkg-descr # echo c - libusb_base mkdir -p libusb_base > /dev/null 2>&1 echo x - libusb_base/Makefile sed 's/^X//' >libusb_base/Makefile << '00dd756110256c8b684f81b5bb5870e5' X# New ports collection makefile for: libusb_base X# Date created: 7 January 2010 X# Whom: Daniel O'Connor X# X# $FreeBSD$ X# X XPORTNAME=3D libusb_base XPORTVERSION=3D 0.1 XCATEGORIES=3D devel XDISTFILES=3D X XMAINTAINER=3D darius@dons.net.au XCOMMENT=3D Stub port for libusb using ports on systems after 800069 X XNO_BUILD=3D XPLIST_FILES=3D bin/libusb-config libdata/pkgconfig/libusb.pc X XCONFLICTS=3D libusb-* X Xdo-install: X ${INSTALL_SCRIPT} ${FILESDIR}/libusb-config ${PREFIX}/bin X ${INSTALL_DATA} ${FILESDIR}/libusb.pc ${PREFIX}/libdata/pkgconfig X X.include X X.if ${OSVERSION} < 800069 XIGNORE=3D only necessary for newer systems X.endif X X.include X 00dd756110256c8b684f81b5bb5870e5 echo c - libusb_base/files mkdir -p libusb_base/files > /dev/null 2>&1 echo x - libusb_base/files/libusb-config sed 's/^X//' >libusb_base/files/libusb-config << 'f7bc2f7ae97ecd94979fcb545= 49fc729' X#!/bin/sh X Xprefix=3D/usr Xexec_prefix=3D${prefix} Xexec_prefix_set=3Dno X Xusage() X{ X cat <&2 Xfi X Xwhile test $# -gt 0; do X case "$1" in X -*=3D*) optarg=3D`echo "$1" | sed 's/[-_a-zA-Z0-9]*=3D//'` ;; X *) optarg=3D ;; X esac X X case $1 in X --prefix=3D*) X prefix=3D$optarg X if test $exec_prefix_set =3D no ; then X exec_prefix=3D$optarg X fi X ;; X --prefix) X echo_prefix=3Dyes X ;; X --exec-prefix=3D*) X exec_prefix=3D$optarg X exec_prefix_set=3Dyes X ;; X --exec-prefix) X echo_exec_prefix=3Dyes X ;; X --version) X echo 0.1.12 X exit 0 X ;; X --cflags) X if test "${prefix}/include" !=3D /usr/include ; then X includes=3D"-I${prefix}/include" X fi X echo_cflags=3Dyes X ;; X --libs) X echo_libs=3Dyes X ;; X *) X usage 1 1>&2 X ;; X esac X shift Xdone X Xif test "$echo_prefix" =3D "yes"; then X echo $prefix Xfi Xif test "$echo_exec_prefix" =3D "yes"; then X echo $exec_prefix Xfi Xif test "$echo_cflags" =3D "yes"; then X echo $includes Xfi Xif test "$echo_libs" =3D "yes"; then X echo -lusb=20 Xfi X f7bc2f7ae97ecd94979fcb54549fc729 echo x - libusb_base/files/libusb.pc sed 's/^X//' >libusb_base/files/libusb.pc << '4869b55c25608b20478ec74359930= bfa' Xprefix=3D/usr Xexec_prefix=3D${prefix} Xlibdir=3D${exec_prefix}/lib Xincludedir=3D${prefix}/include X XName: libusb XDescription: USB access library XVersion: 0.1 XLibs: -L${libdir} -lusb XCflags: -I${includedir} X 4869b55c25608b20478ec74359930bfa echo x - libusb_base/pkg-descr sed 's/^X//' >libusb_base/pkg-descr << 'd66531e76047711b93291269fe9451dd' XThis is a stub port to install files to allow other pieces of software to = find Xlibusb now that it is in base. X XWWW: http://www.freebsd.org X d66531e76047711b93291269fe9451dd exit --Boundary-01=_PIWRLgoRtOrJjxT-- --nextPart2827689.JiVFfemQix Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (FreeBSD) iD8DBQBLRWIP5ZPcIHs/zowRAqG5AJ493jflZBcQ7WB+5AYLQQcjbdPGlwCgiRaw //3cAM2spmKD1Cjb7XJcq1c= =lkDx -----END PGP SIGNATURE----- --nextPart2827689.JiVFfemQix-- From owner-freebsd-usb@FreeBSD.ORG Thu Jan 7 09:52:49 2010 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 709C41065676; Thu, 7 Jan 2010 09:52:49 +0000 (UTC) (envelope-from hselasky@c2i.net) Received: from swip.net (mailfe16.swipnet.se [212.247.155.225]) by mx1.freebsd.org (Postfix) with ESMTP id 9874F8FC0A; Thu, 7 Jan 2010 09:52:48 +0000 (UTC) X-Cloudmark-Score: 0.000000 [] X-Cloudmark-Analysis: v=1.0 c=1 a=cKvUccZAUOsA:10 a=MnI1ikcADjEx7bvsp0jZvQ==:17 a=8kQB0OdkAAAA:8 a=6o3VMnFgjpwDLXtnb8cA:9 a=BhO7zPYYJ54boOpI92YA:7 a=_z-VsweoFo7qTc8dNRNEjo2sj70A:4 a=9aOQ2cSd83gA:10 Received: from [188.126.201.140] (account mc467741@c2i.net HELO laptop002.hselasky.homeunix.org) by mailfe16.swip.net (CommuniGate Pro SMTP 5.2.16) with ESMTPA id 592215009; Thu, 07 Jan 2010 10:52:46 +0100 From: Hans Petter Selasky To: Andrew Date: Thu, 7 Jan 2010 10:51:24 +0100 User-Agent: KMail/1.12.4 (FreeBSD/8.0-STABLE; KDE/4.3.4; amd64; ; ) References: <201001062026.o06KQ3VP043830@www.freebsd.org> <201001062143.56029.hselasky@c2i.net> <54854a7a1001070132o729ffae0qa47874ac2337afc0@mail.gmail.com> In-Reply-To: <54854a7a1001070132o729ffae0qa47874ac2337afc0@mail.gmail.com> X-Face: +~\`s("[*|O,="7?X@L.elg*F"OA\I/3%^p8g?ab%RN'( =?iso-8859-1?q?=3B=5FIjlA=3A=0A=09hGE=2E=2EEw?=, =?iso-8859-1?q?XAQ*o=23=5C/M=7ESC=3DS1-f9=7BEzRfT=27=7CHhll5Q=5Dha5Bt-s=7Co?= =?iso-8859-1?q?TlKMusi=3A1e=5BwJl=7Dkd=7DGR=0A=09Z0adGx-x=5F0zGbZj=27e?=(Y[(UNle~)8CQWXW@:DX+9)_YlB[tIccCPN$7/L' MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201001071051.24707.hselasky@c2i.net> Cc: freebsd-gnats-submit@freebsd.org, freebsd-usb@freebsd.org Subject: Re: usb/142387: Netgear WPN111 not recognised by uath(4) after uathload X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 07 Jan 2010 09:52:49 -0000 On Thursday 07 January 2010 10:32:06 Andrew wrote: > 2010/1/6 Hans Petter Selasky : > > On Wednesday 06 January 2010 21:26:03 Andrew wrote: > >> >Number: 142387 > >> >Category: usb > >> >Synopsis: Netgear WPN111 not recognised by uath(4) after uathload > >> >Confidential: no > >> >Severity: non-critical > >> >Priority: low > >> >Responsible: freebsd-usb > >> >State: open > >> >Quarter: > >> >Keywords: > >> >Date-Required: > >> >Class: sw-bug > >> >Submitter-Id: current-users > >> >Arrival-Date: Wed Jan 06 20:30:06 UTC 2010 > >> >Closed-Date: > >> >Last-Modified: > >> >Originator: Andrew > >> >Release: 8-STABLE > >> >Organization: > >> >Environment: > >> > >> FreeBSD XXXXXX 8.0-STABLE FreeBSD 8.0-STABLE #2: Tue Jan 5 21:34:37 GMT > >> 2010 root@XXXXXX:/usr/obj/usr/src/sys/GENERIC amd64 > >> > >> >Description: > >> > >> After running uathload the device changes from: > >> ugen3.2: at usbus3, cfg=0 md=HOST > >> spd=HIGH (480Mbps) pwr=ON > >> > >> bLength = 0x0012 > >> bDescriptorType = 0x0001 > >> bcdUSB = 0x0200 > >> bDeviceClass = 0x00ff > >> bDeviceSubClass = 0x0000 > >> bDeviceProtocol = 0x0000 > >> bMaxPacketSize0 = 0x0040 > >> idVendor = 0x1385 > >> idProduct = 0x5f01 > >> bcdDevice = 0x0001 > >> iManufacturer = 0x0001 > >> iProduct = 0x0002 > >> iSerialNumber = 0x0003 <1.0> > >> bNumConfigurations = 0x0001 > >> to: > >> ugen3.2: at usbus3, cfg=0 md=HOST > >> spd=HIGH (480Mbps) pwr=ON > >> > >> bLength = 0x0012 > >> bDescriptorType = 0x0001 > >> bcdUSB = 0x0200 > >> bDeviceClass = 0x00ff > >> bDeviceSubClass = 0x0000 > >> bDeviceProtocol = 0x0000 > >> bMaxPacketSize0 = 0x0040 > >> idVendor = 0x1385 > >> idProduct = 0x5f02 > >> bcdDevice = 0x0001 > >> iManufacturer = 0x0001 > >> iProduct = 0x0002 > >> iSerialNumber = 0x0003 <1.0> > >> bNumConfigurations = 0x0001 > >> > >> Note: idProduct 0x5f01 -> 0x5f02 rather than 0x5f00 > >> > >> >How-To-Repeat: > >> > >> Connect a Netgear WPN111, run uathload -d /dev/ugenX.X > >> > >> >Fix: > >> > >> Correct sys/dev/usb/usbdevs product id for WPN111 with firmware, patch > >> attached. > >> > >> uath now attachs: > >> > >> dmesg: > >> ugen3.2: at usbus3 (disconnected) > >> ugen3.2: at usbus3 > >> uath0: on > >> usbus3 > >> > >> > >> ifconfig uath0 > >> uath0: flags=8802 metric 0 mtu 2290 > >> ether 00:14:6c:ea:81:a4 > >> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > >> status: no carrier > >> > >> > >> Patch attached with submission follows: > >> > >> --- usbdevs.orig 2010-01-06 20:15:02.000000000 +0000 > >> +++ usbdevs 2010-01-05 21:28:03.000000000 +0000 > >> @@ -2005,8 +2005,8 @@ > >> product NETGEAR2 MA101B 0x4102 MA101 Rev B > >> product NETGEAR3 WG111T 0x4250 WG111T > >> product NETGEAR3 WG111T_NF 0x4251 WG111T (no firmware) > >> -product NETGEAR3 WPN111 0x5f00 WPN111 > >> product NETGEAR3 WPN111_NF 0x5f01 WPN111 (no firmware) > >> +product NETGEAR3 WPN111 0x5f02 WPN111 > >> > >> /* Nikon products */ > >> product NIKON E990 0x0102 Digital Camera E990 > >> > >> >Release-Note: > >> >Audit-Trail: > >> >Unformatted: > > > > Hi, > > > > Are you certain that product "0x5f00" is incorrect and that we shouldn't > > add the new product, 0x5f02 instead? > > I can't be certain no, it was an assumption on my part that the WPN111 > id was incorrect as the WPN111_NF was correct for the device. Adding a > second id for WPN111 will be enough for my hardware to work. Could you create a new patch where an USB ID is added and not changed, in the appropriate files? --HPS From owner-freebsd-usb@FreeBSD.ORG Thu Jan 7 10:00:15 2010 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D6CF51065672 for ; Thu, 7 Jan 2010 10:00:15 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id BB4328FC13 for ; Thu, 7 Jan 2010 10:00:15 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id o07A0F79003617 for ; Thu, 7 Jan 2010 10:00:15 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id o07A0FEo003616; Thu, 7 Jan 2010 10:00:15 GMT (envelope-from gnats) Date: Thu, 7 Jan 2010 10:00:15 GMT Message-Id: <201001071000.o07A0FEo003616@freefall.freebsd.org> To: freebsd-usb@FreeBSD.org From: Hans Petter Selasky Cc: Subject: Re: usb/142387: Netgear WPN111 not recognised by uath(4) after uathload X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Hans Petter Selasky List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 07 Jan 2010 10:00:15 -0000 The following reply was made to PR usb/142387; it has been noted by GNATS. From: Hans Petter Selasky To: Andrew Cc: freebsd-usb@freebsd.org, freebsd-gnats-submit@freebsd.org Subject: Re: usb/142387: Netgear WPN111 not recognised by uath(4) after uathload Date: Thu, 7 Jan 2010 10:51:24 +0100 On Thursday 07 January 2010 10:32:06 Andrew wrote: > 2010/1/6 Hans Petter Selasky : > > On Wednesday 06 January 2010 21:26:03 Andrew wrote: > >> >Number: 142387 > >> >Category: usb > >> >Synopsis: Netgear WPN111 not recognised by uath(4) after uathload > >> >Confidential: no > >> >Severity: non-critical > >> >Priority: low > >> >Responsible: freebsd-usb > >> >State: open > >> >Quarter: > >> >Keywords: > >> >Date-Required: > >> >Class: sw-bug > >> >Submitter-Id: current-users > >> >Arrival-Date: Wed Jan 06 20:30:06 UTC 2010 > >> >Closed-Date: > >> >Last-Modified: > >> >Originator: Andrew > >> >Release: 8-STABLE > >> >Organization: > >> >Environment: > >> > >> FreeBSD XXXXXX 8.0-STABLE FreeBSD 8.0-STABLE #2: Tue Jan 5 21:34:37 GMT > >> 2010 root@XXXXXX:/usr/obj/usr/src/sys/GENERIC amd64 > >> > >> >Description: > >> > >> After running uathload the device changes from: > >> ugen3.2: at usbus3, cfg=0 md=HOST > >> spd=HIGH (480Mbps) pwr=ON > >> > >> bLength = 0x0012 > >> bDescriptorType = 0x0001 > >> bcdUSB = 0x0200 > >> bDeviceClass = 0x00ff > >> bDeviceSubClass = 0x0000 > >> bDeviceProtocol = 0x0000 > >> bMaxPacketSize0 = 0x0040 > >> idVendor = 0x1385 > >> idProduct = 0x5f01 > >> bcdDevice = 0x0001 > >> iManufacturer = 0x0001 > >> iProduct = 0x0002 > >> iSerialNumber = 0x0003 <1.0> > >> bNumConfigurations = 0x0001 > >> to: > >> ugen3.2: at usbus3, cfg=0 md=HOST > >> spd=HIGH (480Mbps) pwr=ON > >> > >> bLength = 0x0012 > >> bDescriptorType = 0x0001 > >> bcdUSB = 0x0200 > >> bDeviceClass = 0x00ff > >> bDeviceSubClass = 0x0000 > >> bDeviceProtocol = 0x0000 > >> bMaxPacketSize0 = 0x0040 > >> idVendor = 0x1385 > >> idProduct = 0x5f02 > >> bcdDevice = 0x0001 > >> iManufacturer = 0x0001 > >> iProduct = 0x0002 > >> iSerialNumber = 0x0003 <1.0> > >> bNumConfigurations = 0x0001 > >> > >> Note: idProduct 0x5f01 -> 0x5f02 rather than 0x5f00 > >> > >> >How-To-Repeat: > >> > >> Connect a Netgear WPN111, run uathload -d /dev/ugenX.X > >> > >> >Fix: > >> > >> Correct sys/dev/usb/usbdevs product id for WPN111 with firmware, patch > >> attached. > >> > >> uath now attachs: > >> > >> dmesg: > >> ugen3.2: at usbus3 (disconnected) > >> ugen3.2: at usbus3 > >> uath0: on > >> usbus3 > >> > >> > >> ifconfig uath0 > >> uath0: flags=8802 metric 0 mtu 2290 > >> ether 00:14:6c:ea:81:a4 > >> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > >> status: no carrier > >> > >> > >> Patch attached with submission follows: > >> > >> --- usbdevs.orig 2010-01-06 20:15:02.000000000 +0000 > >> +++ usbdevs 2010-01-05 21:28:03.000000000 +0000 > >> @@ -2005,8 +2005,8 @@ > >> product NETGEAR2 MA101B 0x4102 MA101 Rev B > >> product NETGEAR3 WG111T 0x4250 WG111T > >> product NETGEAR3 WG111T_NF 0x4251 WG111T (no firmware) > >> -product NETGEAR3 WPN111 0x5f00 WPN111 > >> product NETGEAR3 WPN111_NF 0x5f01 WPN111 (no firmware) > >> +product NETGEAR3 WPN111 0x5f02 WPN111 > >> > >> /* Nikon products */ > >> product NIKON E990 0x0102 Digital Camera E990 > >> > >> >Release-Note: > >> >Audit-Trail: > >> >Unformatted: > > > > Hi, > > > > Are you certain that product "0x5f00" is incorrect and that we shouldn't > > add the new product, 0x5f02 instead? > > I can't be certain no, it was an assumption on my part that the WPN111 > id was incorrect as the WPN111_NF was correct for the device. Adding a > second id for WPN111 will be enough for my hardware to work. Could you create a new patch where an USB ID is added and not changed, in the appropriate files? --HPS From owner-freebsd-usb@FreeBSD.ORG Thu Jan 7 10:02:54 2010 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B4B0B106566C; Thu, 7 Jan 2010 10:02:54 +0000 (UTC) (envelope-from andrewwtulloch@gmail.com) Received: from mail-fx0-f227.google.com (mail-fx0-f227.google.com [209.85.220.227]) by mx1.freebsd.org (Postfix) with ESMTP id 0CE1D8FC14; Thu, 7 Jan 2010 10:02:53 +0000 (UTC) Received: by fxm27 with SMTP id 27so3520502fxm.3 for ; Thu, 07 Jan 2010 02:02:46 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:sender:received:in-reply-to :references:date:x-google-sender-auth:message-id:subject:from:to:cc :content-type:content-transfer-encoding; bh=wcmBfMCk5DrD6+vj5AttgyHyc0hxFSRkjvhZuyi/TNg=; b=uQUcGEgbARj1vEQPzoPchhnb55Iny9s1a7FSuHFoZxsa5VlPMXI6HotlVjJwiTf6cR CMemSC5pXzeQHbiwgWN9vyevYTkSRH1i3mbbpP00m/wjRyroit3eGV2JEhVd6HyUttdu DS/1BKC1DkOy06XXQYaW0Dkm3IwGICPbWCItU= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type :content-transfer-encoding; b=eiCOo8P12hZydnDZbTP3i+Xjm7q14kOMTmmFuS2ccGhL65Mg5Bvxn3fsZCMMz/+8cT saRaguwdKTYARg0aBH51lEGWmB6q3lEsRLJSi5p/QCWRa6zB/d3XWRnM1kAOiik5GCQl fAyPdRsarTcQOurvDEU93cfhb5b0hOx5If+hA= MIME-Version: 1.0 Sender: andrewwtulloch@gmail.com Received: by 10.239.160.202 with SMTP id e10mr924432hbd.136.1262856726072; Thu, 07 Jan 2010 01:32:06 -0800 (PST) In-Reply-To: <201001062143.56029.hselasky@c2i.net> References: <201001062026.o06KQ3VP043830@www.freebsd.org> <201001062143.56029.hselasky@c2i.net> Date: Thu, 7 Jan 2010 09:32:06 +0000 X-Google-Sender-Auth: 48dbdc6d246b75c4 Message-ID: <54854a7a1001070132o729ffae0qa47874ac2337afc0@mail.gmail.com> From: Andrew To: Hans Petter Selasky Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Cc: freebsd-gnats-submit@freebsd.org, freebsd-usb@freebsd.org Subject: Re: usb/142387: Netgear WPN111 not recognised by uath(4) after uathload X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 07 Jan 2010 10:02:54 -0000 2010/1/6 Hans Petter Selasky : > On Wednesday 06 January 2010 21:26:03 Andrew wrote: >> >Number: =A0 =A0 =A0 =A0 142387 >> >Category: =A0 =A0 =A0 usb >> >Synopsis: =A0 =A0 =A0 Netgear WPN111 not recognised by uath(4) after ua= thload >> >Confidential: =A0 no >> >Severity: =A0 =A0 =A0 non-critical >> >Priority: =A0 =A0 =A0 low >> >Responsible: =A0 =A0freebsd-usb >> >State: =A0 =A0 =A0 =A0 =A0open >> >Quarter: >> >Keywords: >> >Date-Required: >> >Class: =A0 =A0 =A0 =A0 =A0sw-bug >> >Submitter-Id: =A0 current-users >> >Arrival-Date: =A0 Wed Jan 06 20:30:06 UTC 2010 >> >Closed-Date: >> >Last-Modified: >> >Originator: =A0 =A0 Andrew >> >Release: =A0 =A0 =A0 =A08-STABLE >> >Organization: >> >Environment: >> >> FreeBSD XXXXXX 8.0-STABLE FreeBSD 8.0-STABLE #2: Tue Jan =A05 21:34:37 G= MT >> =A02010 =A0 =A0 root@XXXXXX:/usr/obj/usr/src/sys/GENERIC =A0amd64 >> >> >Description: >> >> After running uathload the device changes from: >> ugen3.2: at usbus3, cfg=3D0 md=3DHOS= T >> =A0spd=3DHIGH (480Mbps) pwr=3DON >> >> =A0 bLength =3D 0x0012 >> =A0 bDescriptorType =3D 0x0001 >> =A0 bcdUSB =3D 0x0200 >> =A0 bDeviceClass =3D 0x00ff >> =A0 bDeviceSubClass =3D 0x0000 >> =A0 bDeviceProtocol =3D 0x0000 >> =A0 bMaxPacketSize0 =3D 0x0040 >> =A0 idVendor =3D 0x1385 >> =A0 idProduct =3D 0x5f01 >> =A0 bcdDevice =3D 0x0001 >> =A0 iManufacturer =3D 0x0001 =A0 >> =A0 iProduct =3D 0x0002 =A0 >> =A0 iSerialNumber =3D 0x0003 =A0<1.0> >> =A0 bNumConfigurations =3D 0x0001 >> to: >> ugen3.2: at usbus3, cfg=3D0 md=3DHOS= T >> =A0spd=3DHIGH (480Mbps) pwr=3DON >> >> =A0 bLength =3D 0x0012 >> =A0 bDescriptorType =3D 0x0001 >> =A0 bcdUSB =3D 0x0200 >> =A0 bDeviceClass =3D 0x00ff >> =A0 bDeviceSubClass =3D 0x0000 >> =A0 bDeviceProtocol =3D 0x0000 >> =A0 bMaxPacketSize0 =3D 0x0040 >> =A0 idVendor =3D 0x1385 >> =A0 idProduct =3D 0x5f02 >> =A0 bcdDevice =3D 0x0001 >> =A0 iManufacturer =3D 0x0001 =A0 >> =A0 iProduct =3D 0x0002 =A0 >> =A0 iSerialNumber =3D 0x0003 =A0<1.0> >> =A0 bNumConfigurations =3D 0x0001 >> >> Note: idProduct 0x5f01 -> 0x5f02 rather than 0x5f00 >> >> >How-To-Repeat: >> >> Connect a Netgear WPN111, run uathload -d /dev/ugenX.X >> >> >Fix: >> >> Correct sys/dev/usb/usbdevs product id for WPN111 with firmware, patch >> =A0attached. >> >> uath now attachs: >> >> dmesg: >> ugen3.2: at usbus3 (disconnected) >> ugen3.2: at usbus3 >> uath0: on usb= us3 >> >> >> ifconfig uath0 >> uath0: flags=3D8802 metric 0 mtu 2290 >> =A0 =A0 =A0 =A0 ether 00:14:6c:ea:81:a4 >> =A0 =A0 =A0 =A0 media: IEEE 802.11 Wireless Ethernet autoselect (autosel= ect) >> =A0 =A0 =A0 =A0 status: no carrier >> >> >> Patch attached with submission follows: >> >> --- usbdevs.orig =A0 =A0 =A02010-01-06 20:15:02.000000000 +0000 >> +++ usbdevs =A0 2010-01-05 21:28:03.000000000 +0000 >> @@ -2005,8 +2005,8 @@ >> =A0product NETGEAR2 MA101B =A0 =A0 =A0 =A0 =A0 =A0 =A00x4102 =A0MA101 Re= v B >> =A0product NETGEAR3 WG111T =A0 =A0 =A0 =A0 =A0 =A0 =A00x4250 =A0WG111T >> =A0product NETGEAR3 WG111T_NF =A0 0x4251 =A0WG111T (no firmware) >> -product NETGEAR3 WPN111 =A0 =A0 =A0 =A0 =A0 =A0 =A00x5f00 =A0WPN111 >> =A0product NETGEAR3 WPN111_NF =A0 0x5f01 =A0WPN111 (no firmware) >> +product NETGEAR3 WPN111 =A0 =A0 =A0 =A0 =A0 =A0 =A00x5f02 =A0WPN111 >> >> =A0/* Nikon products */ >> =A0product NIKON E990 =A0 =A0 =A0 =A0 =A0 0x0102 =A0Digital Camera E990 >> >> >Release-Note: >> >Audit-Trail: >> >Unformatted: > > Hi, > > Are you certain that product "0x5f00" is incorrect and that we shouldn't = add > the new product, 0x5f02 instead? I can't be certain no, it was an assumption on my part that the WPN111 id was incorrect as the WPN111_NF was correct for the device. Adding a second id for WPN111 will be enough for my hardware to work. Thanks, Andrew From owner-freebsd-usb@FreeBSD.ORG Thu Jan 7 10:10:07 2010 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7EDFA1065670 for ; Thu, 7 Jan 2010 10:10:07 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 6E4B68FC19 for ; Thu, 7 Jan 2010 10:10:07 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id o07AA7vS013906 for ; Thu, 7 Jan 2010 10:10:07 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id o07AA764013905; Thu, 7 Jan 2010 10:10:07 GMT (envelope-from gnats) Date: Thu, 7 Jan 2010 10:10:07 GMT Message-Id: <201001071010.o07AA764013905@freefall.freebsd.org> To: freebsd-usb@FreeBSD.org From: Andrew Cc: Subject: Re: usb/142387: Netgear WPN111 not recognised by uath(4) after uathload X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Andrew List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 07 Jan 2010 10:10:07 -0000 The following reply was made to PR usb/142387; it has been noted by GNATS. From: Andrew To: Hans Petter Selasky Cc: freebsd-usb@freebsd.org, freebsd-gnats-submit@freebsd.org Subject: Re: usb/142387: Netgear WPN111 not recognised by uath(4) after uathload Date: Thu, 7 Jan 2010 09:32:06 +0000 2010/1/6 Hans Petter Selasky : > On Wednesday 06 January 2010 21:26:03 Andrew wrote: >> >Number: =A0 =A0 =A0 =A0 142387 >> >Category: =A0 =A0 =A0 usb >> >Synopsis: =A0 =A0 =A0 Netgear WPN111 not recognised by uath(4) after ua= thload >> >Confidential: =A0 no >> >Severity: =A0 =A0 =A0 non-critical >> >Priority: =A0 =A0 =A0 low >> >Responsible: =A0 =A0freebsd-usb >> >State: =A0 =A0 =A0 =A0 =A0open >> >Quarter: >> >Keywords: >> >Date-Required: >> >Class: =A0 =A0 =A0 =A0 =A0sw-bug >> >Submitter-Id: =A0 current-users >> >Arrival-Date: =A0 Wed Jan 06 20:30:06 UTC 2010 >> >Closed-Date: >> >Last-Modified: >> >Originator: =A0 =A0 Andrew >> >Release: =A0 =A0 =A0 =A08-STABLE >> >Organization: >> >Environment: >> >> FreeBSD XXXXXX 8.0-STABLE FreeBSD 8.0-STABLE #2: Tue Jan =A05 21:34:37 G= MT >> =A02010 =A0 =A0 root@XXXXXX:/usr/obj/usr/src/sys/GENERIC =A0amd64 >> >> >Description: >> >> After running uathload the device changes from: >> ugen3.2: at usbus3, cfg=3D0 md=3DHOS= T >> =A0spd=3DHIGH (480Mbps) pwr=3DON >> >> =A0 bLength =3D 0x0012 >> =A0 bDescriptorType =3D 0x0001 >> =A0 bcdUSB =3D 0x0200 >> =A0 bDeviceClass =3D 0x00ff >> =A0 bDeviceSubClass =3D 0x0000 >> =A0 bDeviceProtocol =3D 0x0000 >> =A0 bMaxPacketSize0 =3D 0x0040 >> =A0 idVendor =3D 0x1385 >> =A0 idProduct =3D 0x5f01 >> =A0 bcdDevice =3D 0x0001 >> =A0 iManufacturer =3D 0x0001 =A0 >> =A0 iProduct =3D 0x0002 =A0 >> =A0 iSerialNumber =3D 0x0003 =A0<1.0> >> =A0 bNumConfigurations =3D 0x0001 >> to: >> ugen3.2: at usbus3, cfg=3D0 md=3DHOS= T >> =A0spd=3DHIGH (480Mbps) pwr=3DON >> >> =A0 bLength =3D 0x0012 >> =A0 bDescriptorType =3D 0x0001 >> =A0 bcdUSB =3D 0x0200 >> =A0 bDeviceClass =3D 0x00ff >> =A0 bDeviceSubClass =3D 0x0000 >> =A0 bDeviceProtocol =3D 0x0000 >> =A0 bMaxPacketSize0 =3D 0x0040 >> =A0 idVendor =3D 0x1385 >> =A0 idProduct =3D 0x5f02 >> =A0 bcdDevice =3D 0x0001 >> =A0 iManufacturer =3D 0x0001 =A0 >> =A0 iProduct =3D 0x0002 =A0 >> =A0 iSerialNumber =3D 0x0003 =A0<1.0> >> =A0 bNumConfigurations =3D 0x0001 >> >> Note: idProduct 0x5f01 -> 0x5f02 rather than 0x5f00 >> >> >How-To-Repeat: >> >> Connect a Netgear WPN111, run uathload -d /dev/ugenX.X >> >> >Fix: >> >> Correct sys/dev/usb/usbdevs product id for WPN111 with firmware, patch >> =A0attached. >> >> uath now attachs: >> >> dmesg: >> ugen3.2: at usbus3 (disconnected) >> ugen3.2: at usbus3 >> uath0: on usb= us3 >> >> >> ifconfig uath0 >> uath0: flags=3D8802 metric 0 mtu 2290 >> =A0 =A0 =A0 =A0 ether 00:14:6c:ea:81:a4 >> =A0 =A0 =A0 =A0 media: IEEE 802.11 Wireless Ethernet autoselect (autosel= ect) >> =A0 =A0 =A0 =A0 status: no carrier >> >> >> Patch attached with submission follows: >> >> --- usbdevs.orig =A0 =A0 =A02010-01-06 20:15:02.000000000 +0000 >> +++ usbdevs =A0 2010-01-05 21:28:03.000000000 +0000 >> @@ -2005,8 +2005,8 @@ >> =A0product NETGEAR2 MA101B =A0 =A0 =A0 =A0 =A0 =A0 =A00x4102 =A0MA101 Re= v B >> =A0product NETGEAR3 WG111T =A0 =A0 =A0 =A0 =A0 =A0 =A00x4250 =A0WG111T >> =A0product NETGEAR3 WG111T_NF =A0 0x4251 =A0WG111T (no firmware) >> -product NETGEAR3 WPN111 =A0 =A0 =A0 =A0 =A0 =A0 =A00x5f00 =A0WPN111 >> =A0product NETGEAR3 WPN111_NF =A0 0x5f01 =A0WPN111 (no firmware) >> +product NETGEAR3 WPN111 =A0 =A0 =A0 =A0 =A0 =A0 =A00x5f02 =A0WPN111 >> >> =A0/* Nikon products */ >> =A0product NIKON E990 =A0 =A0 =A0 =A0 =A0 0x0102 =A0Digital Camera E990 >> >> >Release-Note: >> >Audit-Trail: >> >Unformatted: > > Hi, > > Are you certain that product "0x5f00" is incorrect and that we shouldn't = add > the new product, 0x5f02 instead? I can't be certain no, it was an assumption on my part that the WPN111 id was incorrect as the WPN111_NF was correct for the device. Adding a second id for WPN111 will be enough for my hardware to work. Thanks, Andrew From owner-freebsd-usb@FreeBSD.ORG Thu Jan 7 10:23:57 2010 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5CDD1106566B; Thu, 7 Jan 2010 10:23:57 +0000 (UTC) (envelope-from andrewwtulloch@gmail.com) Received: from fg-out-1718.google.com (fg-out-1718.google.com [72.14.220.157]) by mx1.freebsd.org (Postfix) with ESMTP id B92C58FC1B; Thu, 7 Jan 2010 10:23:56 +0000 (UTC) Received: by fg-out-1718.google.com with SMTP id 16so2524471fgg.13 for ; Thu, 07 Jan 2010 02:23:50 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:sender:received:in-reply-to :references:date:x-google-sender-auth:message-id:subject:from:to:cc :content-type:content-transfer-encoding; bh=ymtgd/yeizfbzOxAhKdn0QEvBB1PZg62IlT+xLj0NUQ=; b=iV1Ej8bu8Iws6P/Lys3OoX+p91Y0ccX8rb3tAqQhm0AWdCLYvZPntTzL6HVON8wjn3 UrDNhE6WkvhQQhAjT8+7hDQqriOVTYS9NtDL2x21um4LGl2vkRDIpCdLNO2irUcb6rgE iuzM0sO6sHmG7GWY2XcOcU0nhJNi7S4tp/1qI= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type :content-transfer-encoding; b=GIBuxwfI009E7t69eJDS5XNLkLz7j27KnK9rV2rBrXvIZZ+fLfXfLNUg2H3BgQBkTQ NRQ6nENcl/04Cl+8KVH416R3X2+6UyGbeLsI/F5dwiN2GRIo7+TldDlLbbLMKBHeRp1c odOTFdsEqGpVNkQJdbBSKgfVB/7ISK8mlhMpY= MIME-Version: 1.0 Sender: andrewwtulloch@gmail.com Received: by 10.239.172.208 with SMTP id b16mr2186355hbf.39.1262859829635; Thu, 07 Jan 2010 02:23:49 -0800 (PST) In-Reply-To: <54854a7a1001070132o729ffae0qa47874ac2337afc0@mail.gmail.com> References: <201001062026.o06KQ3VP043830@www.freebsd.org> <201001062143.56029.hselasky@c2i.net> <54854a7a1001070132o729ffae0qa47874ac2337afc0@mail.gmail.com> Date: Thu, 7 Jan 2010 10:23:49 +0000 X-Google-Sender-Auth: a69dfd82dcb2f352 Message-ID: <54854a7a1001070223n6c929afv1d4135fa1abf557e@mail.gmail.com> From: Andrew To: Hans Petter Selasky Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Cc: freebsd-gnats-submit@freebsd.org, freebsd-usb@freebsd.org Subject: Re: usb/142387: Netgear WPN111 not recognised by uath(4) after uathload X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 07 Jan 2010 10:23:57 -0000 2010/1/7 Andrew : > 2010/1/6 Hans Petter Selasky : >> On Wednesday 06 January 2010 21:26:03 Andrew wrote: >>> >Number: =A0 =A0 =A0 =A0 142387 >>> >Category: =A0 =A0 =A0 usb >>> >Synopsis: =A0 =A0 =A0 Netgear WPN111 not recognised by uath(4) after u= athload >>> >Confidential: =A0 no >>> >Severity: =A0 =A0 =A0 non-critical >>> >Priority: =A0 =A0 =A0 low >>> >Responsible: =A0 =A0freebsd-usb >>> >State: =A0 =A0 =A0 =A0 =A0open >>> >Quarter: >>> >Keywords: >>> >Date-Required: >>> >Class: =A0 =A0 =A0 =A0 =A0sw-bug >>> >Submitter-Id: =A0 current-users >>> >Arrival-Date: =A0 Wed Jan 06 20:30:06 UTC 2010 >>> >Closed-Date: >>> >Last-Modified: >>> >Originator: =A0 =A0 Andrew >>> >Release: =A0 =A0 =A0 =A08-STABLE >>> >Organization: >>> >Environment: >>> >>> FreeBSD XXXXXX 8.0-STABLE FreeBSD 8.0-STABLE #2: Tue Jan =A05 21:34:37 = GMT >>> =A02010 =A0 =A0 root@XXXXXX:/usr/obj/usr/src/sys/GENERIC =A0amd64 >>> >>> >Description: >>> >>> After running uathload the device changes from: >>> ugen3.2: at usbus3, cfg=3D0 md=3DHO= ST >>> =A0spd=3DHIGH (480Mbps) pwr=3DON >>> >>> =A0 bLength =3D 0x0012 >>> =A0 bDescriptorType =3D 0x0001 >>> =A0 bcdUSB =3D 0x0200 >>> =A0 bDeviceClass =3D 0x00ff >>> =A0 bDeviceSubClass =3D 0x0000 >>> =A0 bDeviceProtocol =3D 0x0000 >>> =A0 bMaxPacketSize0 =3D 0x0040 >>> =A0 idVendor =3D 0x1385 >>> =A0 idProduct =3D 0x5f01 >>> =A0 bcdDevice =3D 0x0001 >>> =A0 iManufacturer =3D 0x0001 =A0 >>> =A0 iProduct =3D 0x0002 =A0 >>> =A0 iSerialNumber =3D 0x0003 =A0<1.0> >>> =A0 bNumConfigurations =3D 0x0001 >>> to: >>> ugen3.2: at usbus3, cfg=3D0 md=3DHO= ST >>> =A0spd=3DHIGH (480Mbps) pwr=3DON >>> >>> =A0 bLength =3D 0x0012 >>> =A0 bDescriptorType =3D 0x0001 >>> =A0 bcdUSB =3D 0x0200 >>> =A0 bDeviceClass =3D 0x00ff >>> =A0 bDeviceSubClass =3D 0x0000 >>> =A0 bDeviceProtocol =3D 0x0000 >>> =A0 bMaxPacketSize0 =3D 0x0040 >>> =A0 idVendor =3D 0x1385 >>> =A0 idProduct =3D 0x5f02 >>> =A0 bcdDevice =3D 0x0001 >>> =A0 iManufacturer =3D 0x0001 =A0 >>> =A0 iProduct =3D 0x0002 =A0 >>> =A0 iSerialNumber =3D 0x0003 =A0<1.0> >>> =A0 bNumConfigurations =3D 0x0001 >>> >>> Note: idProduct 0x5f01 -> 0x5f02 rather than 0x5f00 >>> >>> >How-To-Repeat: >>> >>> Connect a Netgear WPN111, run uathload -d /dev/ugenX.X >>> >>> >Fix: >>> >>> Correct sys/dev/usb/usbdevs product id for WPN111 with firmware, patch >>> =A0attached. >>> >>> uath now attachs: >>> >>> dmesg: >>> ugen3.2: at usbus3 (disconnected) >>> ugen3.2: at usbus3 >>> uath0: on us= bus3 >>> >>> >>> ifconfig uath0 >>> uath0: flags=3D8802 metric 0 mtu 2290 >>> =A0 =A0 =A0 =A0 ether 00:14:6c:ea:81:a4 >>> =A0 =A0 =A0 =A0 media: IEEE 802.11 Wireless Ethernet autoselect (autose= lect) >>> =A0 =A0 =A0 =A0 status: no carrier >>> >>> >>> Patch attached with submission follows: >>> >>> --- usbdevs.orig =A0 =A0 =A02010-01-06 20:15:02.000000000 +0000 >>> +++ usbdevs =A0 2010-01-05 21:28:03.000000000 +0000 >>> @@ -2005,8 +2005,8 @@ >>> =A0product NETGEAR2 MA101B =A0 =A0 =A0 =A0 =A0 =A0 =A00x4102 =A0MA101 R= ev B >>> =A0product NETGEAR3 WG111T =A0 =A0 =A0 =A0 =A0 =A0 =A00x4250 =A0WG111T >>> =A0product NETGEAR3 WG111T_NF =A0 0x4251 =A0WG111T (no firmware) >>> -product NETGEAR3 WPN111 =A0 =A0 =A0 =A0 =A0 =A0 =A00x5f00 =A0WPN111 >>> =A0product NETGEAR3 WPN111_NF =A0 0x5f01 =A0WPN111 (no firmware) >>> +product NETGEAR3 WPN111 =A0 =A0 =A0 =A0 =A0 =A0 =A00x5f02 =A0WPN111 >>> >>> =A0/* Nikon products */ >>> =A0product NIKON E990 =A0 =A0 =A0 =A0 =A0 0x0102 =A0Digital Camera E990 >>> >>> >Release-Note: >>> >Audit-Trail: >>> >Unformatted: >> >> Hi, >> >> Are you certain that product "0x5f00" is incorrect and that we shouldn't= add >> the new product, 0x5f02 instead? > > I can't be certain no, it was an assumption on my part that the WPN111 > id was incorrect as the WPN111_NF was correct for the device. Adding a > second id for WPN111 will =A0be enough for my hardware to work. I have just seen this thread on -net: http://lists.freebsd.org/pipermail/freebsd-net/2010-January/024182.html Seems to be another Netgear uath(4) device that increments rather than decrements it's productId, but that's by no means conclusive. Regards, Andrew From owner-freebsd-usb@FreeBSD.ORG Thu Jan 7 10:30:06 2010 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 99947106568F for ; Thu, 7 Jan 2010 10:30:06 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 893D18FC16 for ; Thu, 7 Jan 2010 10:30:06 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id o07AU6Nx031467 for ; Thu, 7 Jan 2010 10:30:06 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id o07AU6gt031465; Thu, 7 Jan 2010 10:30:06 GMT (envelope-from gnats) Date: Thu, 7 Jan 2010 10:30:06 GMT Message-Id: <201001071030.o07AU6gt031465@freefall.freebsd.org> To: freebsd-usb@FreeBSD.org From: Andrew Cc: Subject: Re: usb/142387: Netgear WPN111 not recognised by uath(4) after uathload X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Andrew List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 07 Jan 2010 10:30:06 -0000 The following reply was made to PR usb/142387; it has been noted by GNATS. From: Andrew To: Hans Petter Selasky Cc: freebsd-usb@freebsd.org, freebsd-gnats-submit@freebsd.org Subject: Re: usb/142387: Netgear WPN111 not recognised by uath(4) after uathload Date: Thu, 7 Jan 2010 10:23:49 +0000 2010/1/7 Andrew : > 2010/1/6 Hans Petter Selasky : >> On Wednesday 06 January 2010 21:26:03 Andrew wrote: >>> >Number: =A0 =A0 =A0 =A0 142387 >>> >Category: =A0 =A0 =A0 usb >>> >Synopsis: =A0 =A0 =A0 Netgear WPN111 not recognised by uath(4) after u= athload >>> >Confidential: =A0 no >>> >Severity: =A0 =A0 =A0 non-critical >>> >Priority: =A0 =A0 =A0 low >>> >Responsible: =A0 =A0freebsd-usb >>> >State: =A0 =A0 =A0 =A0 =A0open >>> >Quarter: >>> >Keywords: >>> >Date-Required: >>> >Class: =A0 =A0 =A0 =A0 =A0sw-bug >>> >Submitter-Id: =A0 current-users >>> >Arrival-Date: =A0 Wed Jan 06 20:30:06 UTC 2010 >>> >Closed-Date: >>> >Last-Modified: >>> >Originator: =A0 =A0 Andrew >>> >Release: =A0 =A0 =A0 =A08-STABLE >>> >Organization: >>> >Environment: >>> >>> FreeBSD XXXXXX 8.0-STABLE FreeBSD 8.0-STABLE #2: Tue Jan =A05 21:34:37 = GMT >>> =A02010 =A0 =A0 root@XXXXXX:/usr/obj/usr/src/sys/GENERIC =A0amd64 >>> >>> >Description: >>> >>> After running uathload the device changes from: >>> ugen3.2: at usbus3, cfg=3D0 md=3DHO= ST >>> =A0spd=3DHIGH (480Mbps) pwr=3DON >>> >>> =A0 bLength =3D 0x0012 >>> =A0 bDescriptorType =3D 0x0001 >>> =A0 bcdUSB =3D 0x0200 >>> =A0 bDeviceClass =3D 0x00ff >>> =A0 bDeviceSubClass =3D 0x0000 >>> =A0 bDeviceProtocol =3D 0x0000 >>> =A0 bMaxPacketSize0 =3D 0x0040 >>> =A0 idVendor =3D 0x1385 >>> =A0 idProduct =3D 0x5f01 >>> =A0 bcdDevice =3D 0x0001 >>> =A0 iManufacturer =3D 0x0001 =A0 >>> =A0 iProduct =3D 0x0002 =A0 >>> =A0 iSerialNumber =3D 0x0003 =A0<1.0> >>> =A0 bNumConfigurations =3D 0x0001 >>> to: >>> ugen3.2: at usbus3, cfg=3D0 md=3DHO= ST >>> =A0spd=3DHIGH (480Mbps) pwr=3DON >>> >>> =A0 bLength =3D 0x0012 >>> =A0 bDescriptorType =3D 0x0001 >>> =A0 bcdUSB =3D 0x0200 >>> =A0 bDeviceClass =3D 0x00ff >>> =A0 bDeviceSubClass =3D 0x0000 >>> =A0 bDeviceProtocol =3D 0x0000 >>> =A0 bMaxPacketSize0 =3D 0x0040 >>> =A0 idVendor =3D 0x1385 >>> =A0 idProduct =3D 0x5f02 >>> =A0 bcdDevice =3D 0x0001 >>> =A0 iManufacturer =3D 0x0001 =A0 >>> =A0 iProduct =3D 0x0002 =A0 >>> =A0 iSerialNumber =3D 0x0003 =A0<1.0> >>> =A0 bNumConfigurations =3D 0x0001 >>> >>> Note: idProduct 0x5f01 -> 0x5f02 rather than 0x5f00 >>> >>> >How-To-Repeat: >>> >>> Connect a Netgear WPN111, run uathload -d /dev/ugenX.X >>> >>> >Fix: >>> >>> Correct sys/dev/usb/usbdevs product id for WPN111 with firmware, patch >>> =A0attached. >>> >>> uath now attachs: >>> >>> dmesg: >>> ugen3.2: at usbus3 (disconnected) >>> ugen3.2: at usbus3 >>> uath0: on us= bus3 >>> >>> >>> ifconfig uath0 >>> uath0: flags=3D8802 metric 0 mtu 2290 >>> =A0 =A0 =A0 =A0 ether 00:14:6c:ea:81:a4 >>> =A0 =A0 =A0 =A0 media: IEEE 802.11 Wireless Ethernet autoselect (autose= lect) >>> =A0 =A0 =A0 =A0 status: no carrier >>> >>> >>> Patch attached with submission follows: >>> >>> --- usbdevs.orig =A0 =A0 =A02010-01-06 20:15:02.000000000 +0000 >>> +++ usbdevs =A0 2010-01-05 21:28:03.000000000 +0000 >>> @@ -2005,8 +2005,8 @@ >>> =A0product NETGEAR2 MA101B =A0 =A0 =A0 =A0 =A0 =A0 =A00x4102 =A0MA101 R= ev B >>> =A0product NETGEAR3 WG111T =A0 =A0 =A0 =A0 =A0 =A0 =A00x4250 =A0WG111T >>> =A0product NETGEAR3 WG111T_NF =A0 0x4251 =A0WG111T (no firmware) >>> -product NETGEAR3 WPN111 =A0 =A0 =A0 =A0 =A0 =A0 =A00x5f00 =A0WPN111 >>> =A0product NETGEAR3 WPN111_NF =A0 0x5f01 =A0WPN111 (no firmware) >>> +product NETGEAR3 WPN111 =A0 =A0 =A0 =A0 =A0 =A0 =A00x5f02 =A0WPN111 >>> >>> =A0/* Nikon products */ >>> =A0product NIKON E990 =A0 =A0 =A0 =A0 =A0 0x0102 =A0Digital Camera E990 >>> >>> >Release-Note: >>> >Audit-Trail: >>> >Unformatted: >> >> Hi, >> >> Are you certain that product "0x5f00" is incorrect and that we shouldn't= add >> the new product, 0x5f02 instead? > > I can't be certain no, it was an assumption on my part that the WPN111 > id was incorrect as the WPN111_NF was correct for the device. Adding a > second id for WPN111 will =A0be enough for my hardware to work. I have just seen this thread on -net: http://lists.freebsd.org/pipermail/freebsd-net/2010-January/024182.html Seems to be another Netgear uath(4) device that increments rather than decrements it's productId, but that's by no means conclusive. Regards, Andrew From owner-freebsd-usb@FreeBSD.ORG Thu Jan 7 17:00:09 2010 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2A9741065693 for ; Thu, 7 Jan 2010 17:00:09 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id E2AA88FC14 for ; Thu, 7 Jan 2010 17:00:08 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id o07H08Lo070173 for ; Thu, 7 Jan 2010 17:00:08 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id o07H082A070172; Thu, 7 Jan 2010 17:00:08 GMT (envelope-from gnats) Resent-Date: Thu, 7 Jan 2010 17:00:08 GMT Resent-Message-Id: <201001071700.o07H082A070172@freefall.freebsd.org> Resent-From: FreeBSD-gnats-submit@FreeBSD.org (GNATS Filer) Resent-To: freebsd-usb@FreeBSD.org Resent-Reply-To: FreeBSD-gnats-submit@FreeBSD.org, Yury Michurin Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 730821065696 for ; Thu, 7 Jan 2010 16:53:16 +0000 (UTC) (envelope-from nobody@FreeBSD.org) Received: from www.freebsd.org (www.freebsd.org [IPv6:2001:4f8:fff6::21]) by mx1.freebsd.org (Postfix) with ESMTP id 622B08FC1A for ; Thu, 7 Jan 2010 16:53:16 +0000 (UTC) Received: from www.freebsd.org (localhost [127.0.0.1]) by www.freebsd.org (8.14.3/8.14.3) with ESMTP id o07GrGEY054762 for ; Thu, 7 Jan 2010 16:53:16 GMT (envelope-from nobody@www.freebsd.org) Received: (from nobody@localhost) by www.freebsd.org (8.14.3/8.14.3/Submit) id o07GrGhG054761; Thu, 7 Jan 2010 16:53:16 GMT (envelope-from nobody) Message-Id: <201001071653.o07GrGhG054761@www.freebsd.org> Date: Thu, 7 Jan 2010 16:53:16 GMT From: Yury Michurin To: freebsd-gnats-submit@FreeBSD.org X-Send-Pr-Version: www-3.1 Cc: Subject: usb/142427: EDIMAX EW7318USG should be added to usbdevs X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 07 Jan 2010 17:00:09 -0000 >Number: 142427 >Category: usb >Synopsis: EDIMAX EW7318USG should be added to usbdevs >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-usb >State: open >Quarter: >Keywords: >Date-Required: >Class: change-request >Submitter-Id: current-users >Arrival-Date: Thu Jan 07 17:00:08 UTC 2010 >Closed-Date: >Last-Modified: >Originator: Yury Michurin >Release: 7.2-STABLE >Organization: none >Environment: FreeBSD delta 7.2-STABLE FreeBSD 7.2-STABLE #5: Thu Jan 7 00:26:51 IST 2010 yury@delta:/usr/obj/usr/src/sys/delta amd64 >Description: At http://www.freebsd.org/releases/7.2R/hardware.html is stated that Edimax EW-7318USG is supported by the rum(4) driver, however it's vendor / product ids are not listed in sys/dev/usb/usbdevs ( and neither in if_rum.c ) which should be: vendor EDIMAX 0x7392 Edimax /* Edimax products */ product EDIMAX EW7318USG 0x7318 USB Wirless dongle I got this values from my wirless card and succefully recompiled the driver (after changing if_rum.c as well), it is now recognising the card: Jan 7 18:43:05 delta kernel: rum0: on uhub5 Jan 7 18:43:05 delta kernel: rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528 Jan 7 18:43:05 delta kernel: rum0: WARNING: using obsoleted IFF_NEEDSGIANT flag Jan 7 18:43:05 delta kernel: rum0: Ethernet address: 00:1f:1f:xx:xx:xx also succefully tested it in AP mode. ( haven't tested with other modes yet ) >How-To-Repeat: N/A >Fix: add to sys/dev/usb/usbdevs: vendor EDIMAX 0x7392 Edimax /* Edimax products */ product EDIMAX EW7318USG 0x7318 USB Wirless dongle add to sys/dev/usb/if_rum.c: { USB_VENDOR_EDIMAX, USB_PRODUCT_EDIMAX_EW7318USG } >Release-Note: >Audit-Trail: >Unformatted: From owner-freebsd-usb@FreeBSD.ORG Thu Jan 7 17:12:56 2010 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 74F6F10656AC; Thu, 7 Jan 2010 17:12:56 +0000 (UTC) (envelope-from hselasky@c2i.net) Received: from swip.net (mailfe07.swip.net [212.247.154.193]) by mx1.freebsd.org (Postfix) with ESMTP id A1D2E8FC12; Thu, 7 Jan 2010 17:12:55 +0000 (UTC) X-Cloudmark-Score: 0.000000 [] X-Cloudmark-Analysis: v=1.0 c=1 a=m9uci9mhhqAA:10 a=MnI1ikcADjEx7bvsp0jZvQ==:17 a=6I5d2MoRAAAA:8 a=PdZVa6tnG4TPgeZgHP4A:9 a=z2hQ9zjXhFjodD2pxQEA:7 a=e1urzfUpNfiZNAM225xGL_dCmLQA:4 a=nhrDLmMEhEgA:10 a=o7NB4I-F-yuaaUI6:21 a=pITwETTWSOxHfpSy:21 Received: from [188.126.201.140] (account mc467741@c2i.net HELO laptop002.hselasky.homeunix.org) by mailfe07.swip.net (CommuniGate Pro SMTP 5.2.16) with ESMTPA id 1355722871; Thu, 07 Jan 2010 18:12:53 +0100 From: Hans Petter Selasky To: freebsd-usb@freebsd.org Date: Thu, 7 Jan 2010 18:11:32 +0100 User-Agent: KMail/1.12.4 (FreeBSD/8.0-STABLE; KDE/4.3.4; amd64; ; ) References: <201001071653.o07GrGhG054761@www.freebsd.org> In-Reply-To: <201001071653.o07GrGhG054761@www.freebsd.org> X-Face: +~\`s("[*|O,="7?X@L.elg*F"OA\I/3%^p8g?ab%RN'(; _IjlA: hGE..Ew, XAQ*o#\/M~SC=S1-f9{EzRfT'|Hhll5Q]ha5Bt-s|oTlKMusi:1e[wJl}kd}GR Z0adGx-x_0zGbZj'e(Y[(UNle~)8CQWXW@:DX+9)_YlB[tIccCPN$7/L' MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit Message-Id: <201001071811.32127.hselasky@c2i.net> Cc: Yury Michurin , freebsd-gnats-submit@freebsd.org Subject: Re: usb/142427: EDIMAX EW7318USG should be added to usbdevs X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 07 Jan 2010 17:12:56 -0000 On Thursday 07 January 2010 17:53:16 Yury Michurin wrote: > >Number: 142427 > >Category: usb > >Synopsis: EDIMAX EW7318USG should be added to usbdevs > >Confidential: no > >Severity: non-critical > >Priority: low > >Responsible: freebsd-usb > >State: open > >Quarter: > >Keywords: > >Date-Required: > >Class: change-request > >Submitter-Id: current-users > >Arrival-Date: Thu Jan 07 17:00:08 UTC 2010 > >Closed-Date: > >Last-Modified: > >Originator: Yury Michurin > >Release: 7.2-STABLE > >Organization: > > none > > >Environment: > > FreeBSD delta 7.2-STABLE FreeBSD 7.2-STABLE #5: Thu Jan 7 00:26:51 IST > 2010 yury@delta:/usr/obj/usr/src/sys/delta amd64 > > >Description: > > At http://www.freebsd.org/releases/7.2R/hardware.html is stated that Edimax > EW-7318USG is supported by the rum(4) driver, however it's vendor / > product ids are not listed in sys/dev/usb/usbdevs ( and neither in > if_rum.c ) which should be: > > > vendor EDIMAX 0x7392 Edimax > /* Edimax products */ > product EDIMAX EW7318USG 0x7318 USB Wirless dongle > > I got this values from my wirless card and succefully recompiled the driver > (after changing if_rum.c as well), it is now recognising the card: > > Jan 7 18:43:05 delta kernel: rum0: 2.00/0.01, addr 2> on uhub5 Jan 7 18:43:05 delta kernel: rum0: MAC/BBP > RT2573 (rev 0x2573a), RF RT2528 Jan 7 18:43:05 delta kernel: rum0: > WARNING: using obsoleted IFF_NEEDSGIANT flag Jan 7 18:43:05 delta kernel: > rum0: Ethernet address: 00:1f:1f:xx:xx:xx > > also succefully tested it in AP mode. ( haven't tested with other modes yet > ) > > >How-To-Repeat: > > N/A > > >Fix: > > add to sys/dev/usb/usbdevs: > > vendor EDIMAX 0x7392 Edimax > /* Edimax products */ > product EDIMAX EW7318USG 0x7318 USB Wirless dongle > > add to sys/dev/usb/if_rum.c: > { USB_VENDOR_EDIMAX, USB_PRODUCT_EDIMAX_EW7318USG } Hi, Committed to USB P4 (FreeBSD 8) --HPS From owner-freebsd-usb@FreeBSD.ORG Thu Jan 7 17:20:03 2010 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3E4841065670 for ; Thu, 7 Jan 2010 17:20:03 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 144008FC0C for ; Thu, 7 Jan 2010 17:20:03 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id o07HK27A087474 for ; Thu, 7 Jan 2010 17:20:02 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id o07HK2NP087463; Thu, 7 Jan 2010 17:20:02 GMT (envelope-from gnats) Date: Thu, 7 Jan 2010 17:20:02 GMT Message-Id: <201001071720.o07HK2NP087463@freefall.freebsd.org> To: freebsd-usb@FreeBSD.org From: Hans Petter Selasky Cc: Subject: Re: usb/142427: EDIMAX EW7318USG should be added to usbdevs X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Hans Petter Selasky List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 07 Jan 2010 17:20:03 -0000 The following reply was made to PR usb/142427; it has been noted by GNATS. From: Hans Petter Selasky To: freebsd-usb@freebsd.org Cc: Yury Michurin , freebsd-gnats-submit@freebsd.org Subject: Re: usb/142427: EDIMAX EW7318USG should be added to usbdevs Date: Thu, 7 Jan 2010 18:11:32 +0100 On Thursday 07 January 2010 17:53:16 Yury Michurin wrote: > >Number: 142427 > >Category: usb > >Synopsis: EDIMAX EW7318USG should be added to usbdevs > >Confidential: no > >Severity: non-critical > >Priority: low > >Responsible: freebsd-usb > >State: open > >Quarter: > >Keywords: > >Date-Required: > >Class: change-request > >Submitter-Id: current-users > >Arrival-Date: Thu Jan 07 17:00:08 UTC 2010 > >Closed-Date: > >Last-Modified: > >Originator: Yury Michurin > >Release: 7.2-STABLE > >Organization: > > none > > >Environment: > > FreeBSD delta 7.2-STABLE FreeBSD 7.2-STABLE #5: Thu Jan 7 00:26:51 IST > 2010 yury@delta:/usr/obj/usr/src/sys/delta amd64 > > >Description: > > At http://www.freebsd.org/releases/7.2R/hardware.html is stated that Edimax > EW-7318USG is supported by the rum(4) driver, however it's vendor / > product ids are not listed in sys/dev/usb/usbdevs ( and neither in > if_rum.c ) which should be: > > > vendor EDIMAX 0x7392 Edimax > /* Edimax products */ > product EDIMAX EW7318USG 0x7318 USB Wirless dongle > > I got this values from my wirless card and succefully recompiled the driver > (after changing if_rum.c as well), it is now recognising the card: > > Jan 7 18:43:05 delta kernel: rum0: 2.00/0.01, addr 2> on uhub5 Jan 7 18:43:05 delta kernel: rum0: MAC/BBP > RT2573 (rev 0x2573a), RF RT2528 Jan 7 18:43:05 delta kernel: rum0: > WARNING: using obsoleted IFF_NEEDSGIANT flag Jan 7 18:43:05 delta kernel: > rum0: Ethernet address: 00:1f:1f:xx:xx:xx > > also succefully tested it in AP mode. ( haven't tested with other modes yet > ) > > >How-To-Repeat: > > N/A > > >Fix: > > add to sys/dev/usb/usbdevs: > > vendor EDIMAX 0x7392 Edimax > /* Edimax products */ > product EDIMAX EW7318USG 0x7318 USB Wirless dongle > > add to sys/dev/usb/if_rum.c: > { USB_VENDOR_EDIMAX, USB_PRODUCT_EDIMAX_EW7318USG } Hi, Committed to USB P4 (FreeBSD 8) --HPS From owner-freebsd-usb@FreeBSD.ORG Thu Jan 7 22:41:55 2010 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 99995106566C for ; Thu, 7 Jan 2010 22:41:55 +0000 (UTC) (envelope-from tkorshnah@aim.com) Received: from imr-da02.mx.aol.com (imr-da02.mx.aol.com [205.188.105.144]) by mx1.freebsd.org (Postfix) with ESMTP id 548098FC12 for ; Thu, 7 Jan 2010 22:41:55 +0000 (UTC) Received: from imo-ma01.mx.aol.com (imo-ma01.mx.aol.com [64.12.78.136]) by imr-da02.mx.aol.com (8.14.1/8.14.1) with ESMTP id o07MVUr2016590 for ; Thu, 7 Jan 2010 17:31:30 -0500 Received: from tkorshnah@aim.com by imo-ma01.mx.aol.com (mail_out_v42.5.) id n.bc7.57227c2a (37060) for ; Thu, 7 Jan 2010 17:31:27 -0500 (EST) Received: from smtprly-mc03.mx.aol.com (smtprly-mc03.mx.aol.com [64.12.95.99]) by cia-db04.mx.aol.com (v127.7) with ESMTP id MAILCIADB046-d3de4b4660b425a; Thu, 07 Jan 2010 17:31:27 -0500 Received: from webmail-m061 (webmail-m061.sim.aol.com [64.12.158.161]) by smtprly-mc03.mx.aol.com (v127.7) with ESMTP id MAILSMTPRLYMC038-d3de4b4660b425a; Thu, 07 Jan 2010 17:31:16 -0500 To: freebsd-usb@freebsd.org Date: Thu, 07 Jan 2010 17:31:16 -0500 X-MB-Message-Source: WebUI X-AOL-IP: 94.226.132.219 X-MB-Message-Type: User MIME-Version: 1.0 From: tkorshnah@aim.com X-Mailer: AIM WebMail 30272-STANDARD Received: from 94.226.132.219 by webmail-m061.sysops.aol.com (64.12.158.161) with HTTP (WebMailUI); Thu, 07 Jan 2010 17:31:16 -0500 Message-Id: <8CC5E004286F347-6BC4-45C3@webmail-m061.sysops.aol.com> X-Spam-Flag: NO X-AOL-SENDER: tkorshnah@aim.com Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: problem USB wireless keyboard and mouse X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 07 Jan 2010 22:41:55 -0000 Hi,=20 I was directed by Kris of PC-BSD to this list to report following problem. I have a HP Pavillion m7760 2006 PC with wireless keyboard and wireless mo= use. They work via a receiver which is connected in the PC by USB. The problem is both do not react when installing PC-BSD first screen. Same for FreeBSD8, as I tried to install as well. There is no reaction on Ctrl+alt+F1. In the messages previous the graphical install screen I managed to read th= e following; USB alloc device 1586 USB alloc device 1624 device descriptor failed at addr2 later uhub reattach port: 435: could not allocate new device. According to Kris of PC-BSD it should be a problem wth the new USB subsyst= em of FreeBSD8. This is an issue that should be resolved. I still had a PS2 keyboard, but had to buy a PS2 mouse in order to install= . Well, buying a PS2 mouse is becoming quite hard. They are all USB nowadays. Without proper USB support BSD will not survive. Besides this, BSD is the best OS I ever used. Stable, fast...a Linux-kille= r... =20 From owner-freebsd-usb@FreeBSD.ORG Fri Jan 8 08:05:39 2010 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DEDA1106568B for ; Fri, 8 Jan 2010 08:05:39 +0000 (UTC) (envelope-from hselasky@c2i.net) Received: from swip.net (mailfe13.swipnet.se [212.247.155.129]) by mx1.freebsd.org (Postfix) with ESMTP id 5C4BC8FC08 for ; Fri, 8 Jan 2010 08:05:39 +0000 (UTC) X-Cloudmark-Score: 0.000000 [] X-Cloudmark-Analysis: v=1.0 c=1 a=HmTCmqbFIJgA:10 a=MnI1ikcADjEx7bvsp0jZvQ==:17 a=axMX1joxAAAA:8 a=-BKGkNdY2cKMZ34aklYA:9 a=7XH7BnjXRmNH7oYX1ocA:7 a=9wYvcNXwijhqLNelO9EjSQDln3AA:4 a=trPmDcgzO54A:10 Received: from [188.126.201.140] (account mc467741@c2i.net HELO laptop002.hselasky.homeunix.org) by mailfe13.swip.net (CommuniGate Pro SMTP 5.2.16) with ESMTPA id 975569852; Fri, 08 Jan 2010 09:05:37 +0100 From: Hans Petter Selasky To: freebsd-usb@freebsd.org Date: Fri, 8 Jan 2010 09:04:15 +0100 User-Agent: KMail/1.12.4 (FreeBSD/8.0-STABLE; KDE/4.3.4; amd64; ; ) References: <8CC5E004286F347-6BC4-45C3@webmail-m061.sysops.aol.com> In-Reply-To: <8CC5E004286F347-6BC4-45C3@webmail-m061.sysops.aol.com> X-Face: +~\`s("[*|O,="7?X@L.elg*F"OA\I/3%^p8g?ab%RN'(; _IjlA: hGE..Ew, XAQ*o#\/M~SC=S1-f9{EzRfT'|Hhll5Q]ha5Bt-s|oTlKMusi:1e[wJl}kd}GR Z0adGx-x_0zGbZj'e(Y[(UNle~)8CQWXW@:DX+9)_YlB[tIccCPN$7/L' MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201001080904.15832.hselasky@c2i.net> Cc: tkorshnah@aim.com Subject: Re: problem USB wireless keyboard and mouse X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 08 Jan 2010 08:05:39 -0000 On Thursday 07 January 2010 23:31:16 tkorshnah@aim.com wrote: > Hi, > > I was directed by Kris of PC-BSD to this list to report following problem. > > I have a HP Pavillion m7760 2006 PC with wireless keyboard and wireless > mouse. They work via a receiver which is connected in the PC by USB. > The problem is both do not react when installing PC-BSD first screen. > Same for FreeBSD8, as I tried to install as well. > There is no reaction on Ctrl+alt+F1. > > In the messages previous the graphical install screen I managed to read the > following; > > USB alloc device 1586 > USB alloc device 1624 > device descriptor failed at addr2 > > later > > uhub reattach port: 435: could not allocate new device. > > According to Kris of PC-BSD it should be a problem wth the new USB > subsystem of FreeBSD8. > > This is an issue that should be resolved. > I still had a PS2 keyboard, but had to buy a PS2 mouse in order to install. > Well, buying a PS2 mouse is becoming quite hard. > They are all USB nowadays. > Without proper USB support BSD will not survive. > > Besides this, BSD is the best OS I ever used. Stable, fast...a > Linux-killer... > Hi, Do other USB devices work? Does an ordinary USB keyboard work? What I need is output from: usbconfig dump_device_desc dump_curr_config_desc Of your system when your mouse+keyboard device is plugged in. It might also be a recent problem of ACPI where some resources were not correctly mapped. --HPS From owner-freebsd-usb@FreeBSD.ORG Sat Jan 9 12:40:03 2010 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 81771106566C for ; Sat, 9 Jan 2010 12:40:03 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 56A378FC0C for ; Sat, 9 Jan 2010 12:40:03 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id o09Ce2GH002723 for ; Sat, 9 Jan 2010 12:40:02 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id o09Ce2oB002722; Sat, 9 Jan 2010 12:40:02 GMT (envelope-from gnats) Date: Sat, 9 Jan 2010 12:40:02 GMT Message-Id: <201001091240.o09Ce2oB002722@freefall.freebsd.org> To: freebsd-usb@FreeBSD.org From: Wiktor Niesiobedzki Cc: Subject: Re: kern/141011: [usb] Encrypted root, geli password at boot; enter key never released X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Wiktor Niesiobedzki List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 09 Jan 2010 12:40:03 -0000 The following reply was made to PR kern/141011; it has been noted by GNATS. From: Wiktor Niesiobedzki To: bug-followup , leclercn Cc: Subject: Re: kern/141011: [usb] Encrypted root, geli password at boot; enter key never released Date: Sat, 9 Jan 2010 13:22:15 +0100 Hi, I've just tried your suggestion to comment out the code "read and discard the input, no one is waiting for it". (I had to comment out also uint32_t c declaration), but I don't see any improvement. Still ukbd is behaving, as enter key hadn't been released. Cheers, Wiktor Niesiob=C4=99dzki