From owner-freebsd-arm@FreeBSD.ORG Mon Jun 20 11:06:58 2011 Return-Path: Delivered-To: freebsd-arm@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4D1171065670 for ; Mon, 20 Jun 2011 11:06:58 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 3C2F58FC1E for ; Mon, 20 Jun 2011 11:06:58 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id p5KB6wA2098058 for ; Mon, 20 Jun 2011 11:06:58 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id p5KB6vjf098056 for freebsd-arm@FreeBSD.org; Mon, 20 Jun 2011 11:06:57 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 20 Jun 2011 11:06:57 GMT Message-Id: <201106201106.p5KB6vjf098056@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-arm@FreeBSD.org Cc: Subject: Current problem reports assigned to freebsd-arm@FreeBSD.org X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 20 Jun 2011 11:06:58 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o arm/156814 arm OpenRD Ultimate does not boot on DB-88F6XXX or SHEEVAP o arm/156496 arm [patch] Minor bugfixes and enhancements to mmc and mmc o arm/155894 arm [patch] Enable at91 booting from SDHC (high capacity) o arm/155214 arm [patch] MMC/SD IO slow on Atmel ARM with modern large o arm/154306 arm named crashes with signal 11 o arm/154227 arm [geli] using GELI leads to panic on ARM o arm/154189 arm lang/perl5.12 doesn't build on arm o arm/153380 arm Panic / translation fault with wlan on ARM o arm/150581 arm [irq] Unknown error generates IRQ address decoding err o arm/149288 arm mail/dovecot causes panic during configure on Sheevapl o arm/134368 arm [patch] nslu2_led driver for the LEDs on the NSLU2 p arm/134338 arm [patch] Lock GPIO accesses on ixp425 12 problems total. From owner-freebsd-arm@FreeBSD.ORG Thu Jun 23 12:15:52 2011 Return-Path: Delivered-To: arm@freebsd.org Received: from mx1.freebsd.org (unknown [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 08C0A106564A; Thu, 23 Jun 2011 12:15:52 +0000 (UTC) (envelope-from tinderbox@freebsd.org) Received: from freebsd-current.sentex.ca (freebsd-current.sentex.ca [64.7.128.98]) by mx1.freebsd.org (Postfix) with ESMTP id AFF778FC15; Thu, 23 Jun 2011 12:15:51 +0000 (UTC) Received: from freebsd-current.sentex.ca (localhost [127.0.0.1]) by freebsd-current.sentex.ca (8.14.4/8.14.4) with ESMTP id p5NCFoXm001849; Thu, 23 Jun 2011 08:15:50 -0400 (EDT) (envelope-from tinderbox@freebsd.org) Received: (from tinderbox@localhost) by freebsd-current.sentex.ca (8.14.4/8.14.4/Submit) id p5NCFog2001845; Thu, 23 Jun 2011 12:15:50 GMT (envelope-from tinderbox@freebsd.org) Date: Thu, 23 Jun 2011 12:15:50 GMT Message-Id: <201106231215.p5NCFog2001845@freebsd-current.sentex.ca> X-Authentication-Warning: freebsd-current.sentex.ca: tinderbox set sender to FreeBSD Tinderbox using -f Sender: FreeBSD Tinderbox From: FreeBSD Tinderbox To: FreeBSD Tinderbox , , Precedence: bulk Cc: Subject: [head tinderbox] failure on arm/arm X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 23 Jun 2011 12:15:52 -0000 TB --- 2011-06-23 11:20:00 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-23 11:20:00 - starting HEAD tinderbox run for arm/arm TB --- 2011-06-23 11:20:00 - cleaning the object tree TB --- 2011-06-23 11:20:35 - cvsupping the source tree TB --- 2011-06-23 11:20:35 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/arm/arm/supfile TB --- 2011-06-23 11:20:54 - building world TB --- 2011-06-23 11:20:54 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-23 11:20:54 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-23 11:20:54 - TARGET=arm TB --- 2011-06-23 11:20:54 - TARGET_ARCH=arm TB --- 2011-06-23 11:20:54 - TZ=UTC TB --- 2011-06-23 11:20:54 - __MAKE_CONF=/dev/null TB --- 2011-06-23 11:20:54 - cd /src TB --- 2011-06-23 11:20:54 - /usr/bin/make -B buildworld >>> World build started on Thu Jun 23 11:20:55 UTC 2011 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries >>> stage 4.3: make dependencies >>> stage 4.4: building everything >>> World build completed on Thu Jun 23 12:15:11 UTC 2011 TB --- 2011-06-23 12:15:11 - WARNING: no kernel config for LINT TB --- 2011-06-23 12:15:11 - cd /src/sys/arm/conf TB --- 2011-06-23 12:15:11 - /usr/sbin/config -m AVILA TB --- 2011-06-23 12:15:11 - building AVILA kernel TB --- 2011-06-23 12:15:11 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-23 12:15:11 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-23 12:15:11 - TARGET=arm TB --- 2011-06-23 12:15:11 - TARGET_ARCH=arm TB --- 2011-06-23 12:15:11 - TZ=UTC TB --- 2011-06-23 12:15:11 - __MAKE_CONF=/dev/null TB --- 2011-06-23 12:15:11 - cd /src TB --- 2011-06-23 12:15:11 - /usr/bin/make -B buildkernel KERNCONF=AVILA >>> Kernel build for AVILA started on Thu Jun 23 12:15:11 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything [...] /src/sys/dev/ath/ath_hal/ah_regdomain.c: In function 'isEepromValid': /src/sys/dev/ath/ath_hal/ah_regdomain.c:170: warning: implicit declaration of function 'HALDEBUG_G' /src/sys/dev/ath/ath_hal/ah_regdomain.c:170: warning: nested extern declaration of 'HALDEBUG_G' [-Wnested-externs] /src/sys/dev/ath/ath_hal/ah_regdomain.c:170: error: 'HAL_DEBUG_REGDOMAIN' undeclared (first use in this function) /src/sys/dev/ath/ath_hal/ah_regdomain.c:170: error: (Each undeclared identifier is reported only once /src/sys/dev/ath/ath_hal/ah_regdomain.c:170: error: for each function it appears in.) /src/sys/dev/ath/ath_hal/ah_regdomain.c: In function 'ath_hal_mapgsm': /src/sys/dev/ath/ath_hal/ah_regdomain.c:612: error: 'HAL_DEBUG_ANY' undeclared (first use in this function) *** Error code 1 Stop in /obj/arm.arm/src/sys/AVILA. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-23 12:15:50 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-23 12:15:50 - ERROR: failed to build AVILA kernel TB --- 2011-06-23 12:15:50 - 2380.55 user 723.12 system 3349.83 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-arm-arm.full From owner-freebsd-arm@FreeBSD.ORG Thu Jun 23 17:02:25 2011 Return-Path: Delivered-To: arm@freebsd.org Received: from mx1.freebsd.org (unknown [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8AFD7106566C; Thu, 23 Jun 2011 17:02:25 +0000 (UTC) (envelope-from tinderbox@freebsd.org) Received: from freebsd-current.sentex.ca (freebsd-current.sentex.ca [64.7.128.98]) by mx1.freebsd.org (Postfix) with ESMTP id 53BFC8FC1E; Thu, 23 Jun 2011 17:02:25 +0000 (UTC) Received: from freebsd-current.sentex.ca (localhost [127.0.0.1]) by freebsd-current.sentex.ca (8.14.4/8.14.4) with ESMTP id p5NH2OUm021836; Thu, 23 Jun 2011 13:02:24 -0400 (EDT) (envelope-from tinderbox@freebsd.org) Received: (from tinderbox@localhost) by freebsd-current.sentex.ca (8.14.4/8.14.4/Submit) id p5NH2OHt021835; Thu, 23 Jun 2011 17:02:24 GMT (envelope-from tinderbox@freebsd.org) Date: Thu, 23 Jun 2011 17:02:24 GMT Message-Id: <201106231702.p5NH2OHt021835@freebsd-current.sentex.ca> X-Authentication-Warning: freebsd-current.sentex.ca: tinderbox set sender to FreeBSD Tinderbox using -f Sender: FreeBSD Tinderbox From: FreeBSD Tinderbox To: FreeBSD Tinderbox , , Precedence: bulk Cc: Subject: [head tinderbox] failure on arm/arm X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 23 Jun 2011 17:02:25 -0000 TB --- 2011-06-23 16:00:01 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-23 16:00:01 - starting HEAD tinderbox run for arm/arm TB --- 2011-06-23 16:00:01 - cleaning the object tree TB --- 2011-06-23 16:00:15 - cvsupping the source tree TB --- 2011-06-23 16:00:15 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/arm/arm/supfile TB --- 2011-06-23 16:00:37 - building world TB --- 2011-06-23 16:00:37 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-23 16:00:37 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-23 16:00:37 - TARGET=arm TB --- 2011-06-23 16:00:37 - TARGET_ARCH=arm TB --- 2011-06-23 16:00:37 - TZ=UTC TB --- 2011-06-23 16:00:37 - __MAKE_CONF=/dev/null TB --- 2011-06-23 16:00:37 - cd /src TB --- 2011-06-23 16:00:37 - /usr/bin/make -B buildworld >>> World build started on Thu Jun 23 16:00:37 UTC 2011 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries >>> stage 4.3: make dependencies >>> stage 4.4: building everything >>> World build completed on Thu Jun 23 16:54:28 UTC 2011 TB --- 2011-06-23 16:54:28 - WARNING: no kernel config for LINT TB --- 2011-06-23 16:54:28 - cd /src/sys/arm/conf TB --- 2011-06-23 16:54:28 - /usr/sbin/config -m AVILA TB --- 2011-06-23 16:54:28 - building AVILA kernel TB --- 2011-06-23 16:54:28 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-23 16:54:28 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-23 16:54:28 - TARGET=arm TB --- 2011-06-23 16:54:28 - TARGET_ARCH=arm TB --- 2011-06-23 16:54:28 - TZ=UTC TB --- 2011-06-23 16:54:28 - __MAKE_CONF=/dev/null TB --- 2011-06-23 16:54:28 - cd /src TB --- 2011-06-23 16:54:28 - /usr/bin/make -B buildkernel KERNCONF=AVILA >>> Kernel build for AVILA started on Thu Jun 23 16:54:28 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything >>> Kernel build for AVILA completed on Thu Jun 23 16:57:20 UTC 2011 TB --- 2011-06-23 16:57:20 - cd /src/sys/arm/conf TB --- 2011-06-23 16:57:20 - /usr/sbin/config -m BWCT TB --- 2011-06-23 16:57:20 - building BWCT kernel TB --- 2011-06-23 16:57:20 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-23 16:57:20 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-23 16:57:20 - TARGET=arm TB --- 2011-06-23 16:57:20 - TARGET_ARCH=arm TB --- 2011-06-23 16:57:20 - TZ=UTC TB --- 2011-06-23 16:57:20 - __MAKE_CONF=/dev/null TB --- 2011-06-23 16:57:20 - cd /src TB --- 2011-06-23 16:57:20 - /usr/bin/make -B buildkernel KERNCONF=BWCT >>> Kernel build for BWCT started on Thu Jun 23 16:57:20 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything >>> Kernel build for BWCT completed on Thu Jun 23 16:59:17 UTC 2011 TB --- 2011-06-23 16:59:17 - cd /src/sys/arm/conf TB --- 2011-06-23 16:59:17 - /usr/sbin/config -m CAMBRIA TB --- 2011-06-23 16:59:18 - building CAMBRIA kernel TB --- 2011-06-23 16:59:18 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-23 16:59:18 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-23 16:59:18 - TARGET=arm TB --- 2011-06-23 16:59:18 - TARGET_ARCH=arm TB --- 2011-06-23 16:59:18 - TZ=UTC TB --- 2011-06-23 16:59:18 - __MAKE_CONF=/dev/null TB --- 2011-06-23 16:59:18 - cd /src TB --- 2011-06-23 16:59:18 - /usr/bin/make -B buildkernel KERNCONF=CAMBRIA >>> Kernel build for CAMBRIA started on Thu Jun 23 16:59:18 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything [...] /src/sys/dev/ath/ath_hal/ah.c:897: undefined reference to `ath_hal_debug' ah.o: In function `ath_hal_setTxQProps': /src/sys/dev/ath/ath_hal/ah.c:870: undefined reference to `ath_hal_debug' ah.o: In function `ath_hal_get_mimo_chan_noise': /src/sys/dev/ath/ath_hal/ah.c:1003: undefined reference to `ath_hal_debug' ah.o: In function `ath_hal_getChanNoise': /src/sys/dev/ath/ath_hal/ah.c:929: undefined reference to `ath_hal_debug' ah.o:/src/sys/dev/ath/ath_hal/ah.c:223: more undefined references to `ath_hal_debug' follow *** Error code 1 Stop in /obj/arm.arm/src/sys/CAMBRIA. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-23 17:02:23 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-23 17:02:23 - ERROR: failed to build CAMBRIA kernel TB --- 2011-06-23 17:02:23 - 2699.52 user 782.00 system 3742.80 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-arm-arm.full From owner-freebsd-arm@FreeBSD.ORG Thu Jun 23 22:52:37 2011 Return-Path: Delivered-To: arm@freebsd.org Received: from mx1.freebsd.org (unknown [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id AB3AA1065670; Thu, 23 Jun 2011 22:52:37 +0000 (UTC) (envelope-from tinderbox@freebsd.org) Received: from freebsd-current.sentex.ca (freebsd-current.sentex.ca [64.7.128.98]) by mx1.freebsd.org (Postfix) with ESMTP id 75AE78FC0C; Thu, 23 Jun 2011 22:52:37 +0000 (UTC) Received: from freebsd-current.sentex.ca (localhost [127.0.0.1]) by freebsd-current.sentex.ca (8.14.4/8.14.4) with ESMTP id p5NMqaSp083384; Thu, 23 Jun 2011 18:52:36 -0400 (EDT) (envelope-from tinderbox@freebsd.org) Received: (from tinderbox@localhost) by freebsd-current.sentex.ca (8.14.4/8.14.4/Submit) id p5NMqalm083383; Thu, 23 Jun 2011 22:52:36 GMT (envelope-from tinderbox@freebsd.org) Date: Thu, 23 Jun 2011 22:52:36 GMT Message-Id: <201106232252.p5NMqalm083383@freebsd-current.sentex.ca> X-Authentication-Warning: freebsd-current.sentex.ca: tinderbox set sender to FreeBSD Tinderbox using -f Sender: FreeBSD Tinderbox From: FreeBSD Tinderbox To: FreeBSD Tinderbox , , Precedence: bulk Cc: Subject: [head tinderbox] failure on arm/arm X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 23 Jun 2011 22:52:37 -0000 TB --- 2011-06-23 21:50:00 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-23 21:50:00 - starting HEAD tinderbox run for arm/arm TB --- 2011-06-23 21:50:00 - cleaning the object tree TB --- 2011-06-23 21:50:22 - cvsupping the source tree TB --- 2011-06-23 21:50:22 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/arm/arm/supfile TB --- 2011-06-23 21:50:59 - building world TB --- 2011-06-23 21:50:59 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-23 21:50:59 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-23 21:50:59 - TARGET=arm TB --- 2011-06-23 21:50:59 - TARGET_ARCH=arm TB --- 2011-06-23 21:50:59 - TZ=UTC TB --- 2011-06-23 21:50:59 - __MAKE_CONF=/dev/null TB --- 2011-06-23 21:50:59 - cd /src TB --- 2011-06-23 21:50:59 - /usr/bin/make -B buildworld >>> World build started on Thu Jun 23 21:50:59 UTC 2011 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries >>> stage 4.3: make dependencies >>> stage 4.4: building everything >>> World build completed on Thu Jun 23 22:44:34 UTC 2011 TB --- 2011-06-23 22:44:35 - WARNING: no kernel config for LINT TB --- 2011-06-23 22:44:35 - cd /src/sys/arm/conf TB --- 2011-06-23 22:44:35 - /usr/sbin/config -m AVILA TB --- 2011-06-23 22:44:35 - building AVILA kernel TB --- 2011-06-23 22:44:35 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-23 22:44:35 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-23 22:44:35 - TARGET=arm TB --- 2011-06-23 22:44:35 - TARGET_ARCH=arm TB --- 2011-06-23 22:44:35 - TZ=UTC TB --- 2011-06-23 22:44:35 - __MAKE_CONF=/dev/null TB --- 2011-06-23 22:44:35 - cd /src TB --- 2011-06-23 22:44:35 - /usr/bin/make -B buildkernel KERNCONF=AVILA >>> Kernel build for AVILA started on Thu Jun 23 22:44:35 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything >>> Kernel build for AVILA completed on Thu Jun 23 22:47:54 UTC 2011 TB --- 2011-06-23 22:47:54 - cd /src/sys/arm/conf TB --- 2011-06-23 22:47:54 - /usr/sbin/config -m BWCT TB --- 2011-06-23 22:47:54 - building BWCT kernel TB --- 2011-06-23 22:47:54 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-23 22:47:54 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-23 22:47:54 - TARGET=arm TB --- 2011-06-23 22:47:54 - TARGET_ARCH=arm TB --- 2011-06-23 22:47:54 - TZ=UTC TB --- 2011-06-23 22:47:54 - __MAKE_CONF=/dev/null TB --- 2011-06-23 22:47:54 - cd /src TB --- 2011-06-23 22:47:54 - /usr/bin/make -B buildkernel KERNCONF=BWCT >>> Kernel build for BWCT started on Thu Jun 23 22:47:54 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything >>> Kernel build for BWCT completed on Thu Jun 23 22:49:54 UTC 2011 TB --- 2011-06-23 22:49:54 - cd /src/sys/arm/conf TB --- 2011-06-23 22:49:54 - /usr/sbin/config -m CAMBRIA TB --- 2011-06-23 22:49:54 - building CAMBRIA kernel TB --- 2011-06-23 22:49:54 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-23 22:49:54 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-23 22:49:54 - TARGET=arm TB --- 2011-06-23 22:49:54 - TARGET_ARCH=arm TB --- 2011-06-23 22:49:54 - TZ=UTC TB --- 2011-06-23 22:49:54 - __MAKE_CONF=/dev/null TB --- 2011-06-23 22:49:54 - cd /src TB --- 2011-06-23 22:49:54 - /usr/bin/make -B buildkernel KERNCONF=CAMBRIA >>> Kernel build for CAMBRIA started on Thu Jun 23 22:49:54 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything [...] /src/sys/dev/ath/ath_hal/ah.c:897: undefined reference to `ath_hal_debug' ah.o: In function `ath_hal_setTxQProps': /src/sys/dev/ath/ath_hal/ah.c:870: undefined reference to `ath_hal_debug' ah.o: In function `ath_hal_get_mimo_chan_noise': /src/sys/dev/ath/ath_hal/ah.c:1003: undefined reference to `ath_hal_debug' ah.o: In function `ath_hal_getChanNoise': /src/sys/dev/ath/ath_hal/ah.c:929: undefined reference to `ath_hal_debug' ah.o:/src/sys/dev/ath/ath_hal/ah.c:223: more undefined references to `ath_hal_debug' follow *** Error code 1 Stop in /obj/arm.arm/src/sys/CAMBRIA. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-23 22:52:35 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-23 22:52:35 - ERROR: failed to build CAMBRIA kernel TB --- 2011-06-23 22:52:35 - 2690.85 user 772.94 system 3754.91 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-arm-arm.full From owner-freebsd-arm@FreeBSD.ORG Fri Jun 24 04:43:47 2011 Return-Path: Delivered-To: arm@freebsd.org Received: from mx1.freebsd.org (unknown [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9578A106564A; Fri, 24 Jun 2011 04:43:47 +0000 (UTC) (envelope-from tinderbox@freebsd.org) Received: from freebsd-current.sentex.ca (freebsd-current.sentex.ca [64.7.128.98]) by mx1.freebsd.org (Postfix) with ESMTP id 6890A8FC0C; Fri, 24 Jun 2011 04:43:47 +0000 (UTC) Received: from freebsd-current.sentex.ca (localhost [127.0.0.1]) by freebsd-current.sentex.ca (8.14.4/8.14.4) with ESMTP id p5O4hfFa045206; Fri, 24 Jun 2011 00:43:46 -0400 (EDT) (envelope-from tinderbox@freebsd.org) Received: (from tinderbox@localhost) by freebsd-current.sentex.ca (8.14.4/8.14.4/Submit) id p5O4hfZG045178; Fri, 24 Jun 2011 04:43:41 GMT (envelope-from tinderbox@freebsd.org) Date: Fri, 24 Jun 2011 04:43:41 GMT Message-Id: <201106240443.p5O4hfZG045178@freebsd-current.sentex.ca> X-Authentication-Warning: freebsd-current.sentex.ca: tinderbox set sender to FreeBSD Tinderbox using -f Sender: FreeBSD Tinderbox From: FreeBSD Tinderbox To: FreeBSD Tinderbox , , Precedence: bulk Cc: Subject: [head tinderbox] failure on arm/arm X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 24 Jun 2011 04:43:47 -0000 TB --- 2011-06-24 03:40:00 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-24 03:40:00 - starting HEAD tinderbox run for arm/arm TB --- 2011-06-24 03:40:00 - cleaning the object tree TB --- 2011-06-24 03:40:20 - cvsupping the source tree TB --- 2011-06-24 03:40:20 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/arm/arm/supfile TB --- 2011-06-24 03:40:58 - building world TB --- 2011-06-24 03:40:58 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-24 03:40:58 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-24 03:40:58 - TARGET=arm TB --- 2011-06-24 03:40:58 - TARGET_ARCH=arm TB --- 2011-06-24 03:40:58 - TZ=UTC TB --- 2011-06-24 03:40:58 - __MAKE_CONF=/dev/null TB --- 2011-06-24 03:40:58 - cd /src TB --- 2011-06-24 03:40:58 - /usr/bin/make -B buildworld >>> World build started on Fri Jun 24 03:40:58 UTC 2011 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries >>> stage 4.3: make dependencies >>> stage 4.4: building everything >>> World build completed on Fri Jun 24 04:35:32 UTC 2011 TB --- 2011-06-24 04:35:33 - WARNING: no kernel config for LINT TB --- 2011-06-24 04:35:33 - cd /src/sys/arm/conf TB --- 2011-06-24 04:35:33 - /usr/sbin/config -m AVILA TB --- 2011-06-24 04:35:33 - building AVILA kernel TB --- 2011-06-24 04:35:33 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-24 04:35:33 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-24 04:35:33 - TARGET=arm TB --- 2011-06-24 04:35:33 - TARGET_ARCH=arm TB --- 2011-06-24 04:35:33 - TZ=UTC TB --- 2011-06-24 04:35:33 - __MAKE_CONF=/dev/null TB --- 2011-06-24 04:35:33 - cd /src TB --- 2011-06-24 04:35:33 - /usr/bin/make -B buildkernel KERNCONF=AVILA >>> Kernel build for AVILA started on Fri Jun 24 04:35:33 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything >>> Kernel build for AVILA completed on Fri Jun 24 04:38:24 UTC 2011 TB --- 2011-06-24 04:38:24 - cd /src/sys/arm/conf TB --- 2011-06-24 04:38:24 - /usr/sbin/config -m BWCT TB --- 2011-06-24 04:38:24 - building BWCT kernel TB --- 2011-06-24 04:38:24 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-24 04:38:24 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-24 04:38:24 - TARGET=arm TB --- 2011-06-24 04:38:24 - TARGET_ARCH=arm TB --- 2011-06-24 04:38:24 - TZ=UTC TB --- 2011-06-24 04:38:24 - __MAKE_CONF=/dev/null TB --- 2011-06-24 04:38:24 - cd /src TB --- 2011-06-24 04:38:24 - /usr/bin/make -B buildkernel KERNCONF=BWCT >>> Kernel build for BWCT started on Fri Jun 24 04:38:24 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything >>> Kernel build for BWCT completed on Fri Jun 24 04:40:50 UTC 2011 TB --- 2011-06-24 04:40:50 - cd /src/sys/arm/conf TB --- 2011-06-24 04:40:50 - /usr/sbin/config -m CAMBRIA TB --- 2011-06-24 04:40:50 - building CAMBRIA kernel TB --- 2011-06-24 04:40:50 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-24 04:40:50 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-24 04:40:50 - TARGET=arm TB --- 2011-06-24 04:40:50 - TARGET_ARCH=arm TB --- 2011-06-24 04:40:50 - TZ=UTC TB --- 2011-06-24 04:40:50 - __MAKE_CONF=/dev/null TB --- 2011-06-24 04:40:50 - cd /src TB --- 2011-06-24 04:40:50 - /usr/bin/make -B buildkernel KERNCONF=CAMBRIA >>> Kernel build for CAMBRIA started on Fri Jun 24 04:40:50 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything [...] /src/sys/dev/ath/ath_hal/ah.c:897: undefined reference to `ath_hal_debug' ah.o: In function `ath_hal_setTxQProps': /src/sys/dev/ath/ath_hal/ah.c:870: undefined reference to `ath_hal_debug' ah.o: In function `ath_hal_get_mimo_chan_noise': /src/sys/dev/ath/ath_hal/ah.c:1003: undefined reference to `ath_hal_debug' ah.o: In function `ath_hal_getChanNoise': /src/sys/dev/ath/ath_hal/ah.c:929: undefined reference to `ath_hal_debug' ah.o:/src/sys/dev/ath/ath_hal/ah.c:223: more undefined references to `ath_hal_debug' follow *** Error code 1 Stop in /obj/arm.arm/src/sys/CAMBRIA. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-24 04:43:35 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-24 04:43:35 - ERROR: failed to build CAMBRIA kernel TB --- 2011-06-24 04:43:35 - 2733.97 user 781.89 system 3815.13 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-arm-arm.full From owner-freebsd-arm@FreeBSD.ORG Fri Jun 24 10:33:45 2011 Return-Path: Delivered-To: arm@freebsd.org Received: from mx1.freebsd.org (unknown [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 17B33106564A; Fri, 24 Jun 2011 10:33:45 +0000 (UTC) (envelope-from tinderbox@freebsd.org) Received: from freebsd-current.sentex.ca (freebsd-current.sentex.ca [64.7.128.98]) by mx1.freebsd.org (Postfix) with ESMTP id DAAC58FC13; Fri, 24 Jun 2011 10:33:44 +0000 (UTC) Received: from freebsd-current.sentex.ca (localhost [127.0.0.1]) by freebsd-current.sentex.ca (8.14.4/8.14.4) with ESMTP id p5OAXhTg007043; Fri, 24 Jun 2011 06:33:43 -0400 (EDT) (envelope-from tinderbox@freebsd.org) Received: (from tinderbox@localhost) by freebsd-current.sentex.ca (8.14.4/8.14.4/Submit) id p5OAXhSr007042; Fri, 24 Jun 2011 10:33:43 GMT (envelope-from tinderbox@freebsd.org) Date: Fri, 24 Jun 2011 10:33:43 GMT Message-Id: <201106241033.p5OAXhSr007042@freebsd-current.sentex.ca> X-Authentication-Warning: freebsd-current.sentex.ca: tinderbox set sender to FreeBSD Tinderbox using -f Sender: FreeBSD Tinderbox From: FreeBSD Tinderbox To: FreeBSD Tinderbox , , Precedence: bulk Cc: Subject: [head tinderbox] failure on arm/arm X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 24 Jun 2011 10:33:45 -0000 TB --- 2011-06-24 09:30:00 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-24 09:30:00 - starting HEAD tinderbox run for arm/arm TB --- 2011-06-24 09:30:00 - cleaning the object tree TB --- 2011-06-24 09:30:21 - cvsupping the source tree TB --- 2011-06-24 09:30:21 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/arm/arm/supfile TB --- 2011-06-24 09:30:46 - building world TB --- 2011-06-24 09:30:46 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-24 09:30:46 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-24 09:30:46 - TARGET=arm TB --- 2011-06-24 09:30:46 - TARGET_ARCH=arm TB --- 2011-06-24 09:30:46 - TZ=UTC TB --- 2011-06-24 09:30:46 - __MAKE_CONF=/dev/null TB --- 2011-06-24 09:30:46 - cd /src TB --- 2011-06-24 09:30:46 - /usr/bin/make -B buildworld >>> World build started on Fri Jun 24 09:30:47 UTC 2011 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries >>> stage 4.3: make dependencies >>> stage 4.4: building everything >>> World build completed on Fri Jun 24 10:25:42 UTC 2011 TB --- 2011-06-24 10:25:43 - WARNING: no kernel config for LINT TB --- 2011-06-24 10:25:43 - cd /src/sys/arm/conf TB --- 2011-06-24 10:25:43 - /usr/sbin/config -m AVILA TB --- 2011-06-24 10:25:43 - building AVILA kernel TB --- 2011-06-24 10:25:43 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-24 10:25:43 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-24 10:25:43 - TARGET=arm TB --- 2011-06-24 10:25:43 - TARGET_ARCH=arm TB --- 2011-06-24 10:25:43 - TZ=UTC TB --- 2011-06-24 10:25:43 - __MAKE_CONF=/dev/null TB --- 2011-06-24 10:25:43 - cd /src TB --- 2011-06-24 10:25:43 - /usr/bin/make -B buildkernel KERNCONF=AVILA >>> Kernel build for AVILA started on Fri Jun 24 10:25:43 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything >>> Kernel build for AVILA completed on Fri Jun 24 10:28:59 UTC 2011 TB --- 2011-06-24 10:28:59 - cd /src/sys/arm/conf TB --- 2011-06-24 10:28:59 - /usr/sbin/config -m BWCT TB --- 2011-06-24 10:28:59 - building BWCT kernel TB --- 2011-06-24 10:28:59 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-24 10:28:59 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-24 10:28:59 - TARGET=arm TB --- 2011-06-24 10:28:59 - TARGET_ARCH=arm TB --- 2011-06-24 10:28:59 - TZ=UTC TB --- 2011-06-24 10:28:59 - __MAKE_CONF=/dev/null TB --- 2011-06-24 10:28:59 - cd /src TB --- 2011-06-24 10:28:59 - /usr/bin/make -B buildkernel KERNCONF=BWCT >>> Kernel build for BWCT started on Fri Jun 24 10:28:59 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything >>> Kernel build for BWCT completed on Fri Jun 24 10:31:00 UTC 2011 TB --- 2011-06-24 10:31:00 - cd /src/sys/arm/conf TB --- 2011-06-24 10:31:00 - /usr/sbin/config -m CAMBRIA TB --- 2011-06-24 10:31:00 - building CAMBRIA kernel TB --- 2011-06-24 10:31:00 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-24 10:31:00 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-24 10:31:00 - TARGET=arm TB --- 2011-06-24 10:31:00 - TARGET_ARCH=arm TB --- 2011-06-24 10:31:00 - TZ=UTC TB --- 2011-06-24 10:31:00 - __MAKE_CONF=/dev/null TB --- 2011-06-24 10:31:00 - cd /src TB --- 2011-06-24 10:31:00 - /usr/bin/make -B buildkernel KERNCONF=CAMBRIA >>> Kernel build for CAMBRIA started on Fri Jun 24 10:31:00 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything [...] /src/sys/dev/ath/ath_hal/ah.c:897: undefined reference to `ath_hal_debug' ah.o: In function `ath_hal_setTxQProps': /src/sys/dev/ath/ath_hal/ah.c:870: undefined reference to `ath_hal_debug' ah.o: In function `ath_hal_get_mimo_chan_noise': /src/sys/dev/ath/ath_hal/ah.c:1003: undefined reference to `ath_hal_debug' ah.o: In function `ath_hal_getChanNoise': /src/sys/dev/ath/ath_hal/ah.c:929: undefined reference to `ath_hal_debug' ah.o:/src/sys/dev/ath/ath_hal/ah.c:223: more undefined references to `ath_hal_debug' follow *** Error code 1 Stop in /obj/arm.arm/src/sys/CAMBRIA. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-24 10:33:43 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-24 10:33:43 - ERROR: failed to build CAMBRIA kernel TB --- 2011-06-24 10:33:43 - 2743.54 user 796.68 system 3822.70 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-arm-arm.full From owner-freebsd-arm@FreeBSD.ORG Fri Jun 24 11:47:19 2011 Return-Path: Delivered-To: freebsd-arm@freebsd.org Received: from mx1.freebsd.org (unknown [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9204D1065670 for ; Fri, 24 Jun 2011 11:47:19 +0000 (UTC) (envelope-from elektronika5sale@wp.pl) Received: from mail01.home.net.pl (mail01.home.net.pl [62.129.252.11]) by mx1.freebsd.org (Postfix) with SMTP id 0A2568FC16 for ; Fri, 24 Jun 2011 11:47:18 +0000 (UTC) Received: from abxj100.neoplus.adsl.tpnet.pl [83.9.3.100] (HELO aehj98.neoplus.adsl.tpnet.pl) by internetmail.home.pl [212.85.96.60] with SMTP (IdeaSmtpServer v0.70) id f6b44a7c4d920d0b; Fri, 24 Jun 2011 13:40:38 +0200 From: "Car Lab IMMO" To: "freebsd-arm" MIME-Version: 1.0 Organization: Car Lab IMMO Date: Fri, 24 Jun 2011 13:40:38 +0200 Message-Id: <20110624114719.9204D1065670@hub.freebsd.org> Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: BYPASS + SIMULATOR OF IMMOBILIZERS AND SEAT OCCUPANT DETECTOR - COMPANY OFFER X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 24 Jun 2011 11:47:19 -0000 =20 NEW, BETTER, WITH ADDITIONAL FUNCTIONS: BYPASS - Audi, Seat, Skoda, VW + simulator of immobilizers and seat occupant detector 39 programs ! It turns on or turns off immobilizer through the diagnostic plug OBD a= nd it allows emergency start after connect pins of instrument cluster = or immo, it also additionally works as a simulator of immobilizers and= seat occupant detector. This device is unique, it works without quantitative restrictions (you= can use it repeatedly in many cars), it is produced in the European U= nion by company CarLabImmo. PACKAGE CONTAINS: 1. BYPASS + simulator of immobilizers and seat occupant detector , 2. leather etui, 3. CD with instructions =2E.. for only 525 EURO !!! Warning! Since this version of the device, any updates FREE! (client only covers shipping costs both ways) Please visit our online store: www.elektronika.renado.pl Regards, Electronic Services Iwona Piotrowska st. Szosowa 2c 74-320 Barlinek=20 mobile 0048 691 406 958 If you are not interested in innovations offered by our company, pleas= e disregard this message. We sincerely apologize people not interested= in the news, for your time and place in your inbox. From owner-freebsd-arm@FreeBSD.ORG Fri Jun 24 11:59:21 2011 Return-Path: Delivered-To: freebsd-arm@freebsd.org Received: from mx1.freebsd.org (unknown [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6E4E91065672 for ; Fri, 24 Jun 2011 11:59:21 +0000 (UTC) (envelope-from elektronika5sale@wp.pl) Received: from mail01.home.net.pl (mail01.home.net.pl [62.129.252.11]) by mx1.freebsd.org (Postfix) with SMTP id DA2798FC08 for ; Fri, 24 Jun 2011 11:59:20 +0000 (UTC) Received: from abxj100.neoplus.adsl.tpnet.pl [83.9.3.100] (HELO aehj98.neoplus.adsl.tpnet.pl) by internetmail.home.pl [5.65.4.27.in-addr.arpa] with SMTP (IdeaSmtpServer v0.70) id d22f36fb850fefb6; Fri, 24 Jun 2011 13:32:40 +0200 From: "Car Lab IMMO" To: "freebsd-arm" MIME-Version: 1.0 Organization: Car Lab IMMO Date: Fri, 24 Jun 2011 13:32:40 +0200 Message-Id: <20110624115921.6E4E91065672@hub.freebsd.org> Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: BYPASS + SIMULATOR OF IMMOBILIZERS AND SEAT OCCUPANT DETECTOR - COMPANY OFFER X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 24 Jun 2011 11:59:21 -0000 =20 NEW, BETTER, WITH ADDITIONAL FUNCTIONS: BYPASS - Audi, Seat, Skoda, VW + simulator of immobilizers and seat occupant detector 39 programs ! It turns on or turns off immobilizer through the diagnostic plug OBD a= nd it allows emergency start after connect pins of instrument cluster = or immo, it also additionally works as a simulator of immobilizers and= seat occupant detector. This device is unique, it works without quantitative restrictions (you= can use it repeatedly in many cars), it is produced in the European U= nion by company CarLabImmo. PACKAGE CONTAINS: 1. BYPASS + simulator of immobilizers and seat occupant detector , 2. leather etui, 3. CD with instructions =2E.. for only 525 EURO !!! Warning! Since this version of the device, any updates FREE! (client only covers shipping costs both ways) Please visit our online store: www.elektronika.renado.pl Regards, Electronic Services Iwona Piotrowska st. Szosowa 2c 74-320 Barlinek=20 mobile 0048 691 406 958 If you are not interested in innovations offered by our company, pleas= e disregard this message. We sincerely apologize people not interested= in the news, for your time and place in your inbox. From owner-freebsd-arm@FreeBSD.ORG Fri Jun 24 12:55:35 2011 Return-Path: Delivered-To: freebsd-arm@freebsd.org Received: from mx1.freebsd.org (unknown [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 188FA106566C for ; Fri, 24 Jun 2011 12:55:35 +0000 (UTC) (envelope-from eng.mufic@gmail.com) Received: from mail-pw0-f54.google.com (mail-pw0-f54.google.com [209.85.160.54]) by mx1.freebsd.org (Postfix) with ESMTP id E377F8FC08 for ; Fri, 24 Jun 2011 12:55:34 +0000 (UTC) Received: by pwi7 with SMTP id 7so455072pwi.13 for ; Fri, 24 Jun 2011 05:55:34 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:sender:date:x-google-sender-auth :message-id:subject:from:to:content-type; bh=tkytgHdLCPPshAZzk7CaSGddiiy7gVTWcabUEKmV2WQ=; b=HS/5O+D3tzowD/En545wndB506hoLE2i8AhzGL2FaXlF55A3K85Y6CeWU1S26IEHzu JPuyNcY0uuQ5Lhl+oG1XSIZ6Pd2OIWY2ykNdbbgI7Qpyqvs3w9L+P3ZQRQQgDv4gImcm t78gWsBpds+ZkYMyN/oy/gcJtvmE5HDkR8wA0= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:sender:date:x-google-sender-auth:message-id:subject :from:to:content-type; b=GSkwFAgge17gHi+QPPKpzkjKVDZHnWMjp57JDhyuGk+AjW8FStybCQEKLI0jnU9mio 6Pnjddg3lmEzt/4e/hvdgNW8iaiIJ0d4HxeuU6JwqIgSKPuV+O9tJlEeM8QtSI2/weVH N8/FH2BJIDVPZRVTYe2yBcVdFFKir9ETr32G0= MIME-Version: 1.0 Received: by 10.68.27.200 with SMTP id v8mr1860822pbg.19.1308918353075; Fri, 24 Jun 2011 05:25:53 -0700 (PDT) Sender: eng.mufic@gmail.com Received: by 10.68.60.6 with HTTP; Fri, 24 Jun 2011 05:25:53 -0700 (PDT) Date: Fri, 24 Jun 2011 15:25:53 +0300 X-Google-Sender-Auth: tACtuXxJllsps9xO2stlgAROZ7U Message-ID: From: Mohammed Farrag To: freebsd-arm@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: OMAP4 and Debugging Symbols questions X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 24 Jun 2011 12:55:35 -0000 Hello FreeBSDers, I am working on bringing freebsd to new hardware. One of the problems I faced is OMAP4 emulation (pandaboard). Unfortuantely, it's only supported on CCSv4 and virtio so for large debug info, I used Code Composer Studio but I was asked for loading symbols for debugging which is vmlinux in Linux. Unfortunately, I don't have strong knowledge in Linux. So, What is the similar file to this one in FreeBSD? Also, Will be there differences in making process for building for pandaboard target or I should add paramters for OMAP4 make? Regards, Mohammed From owner-freebsd-arm@FreeBSD.ORG Fri Jun 24 16:22:12 2011 Return-Path: Delivered-To: arm@freebsd.org Received: from mx1.freebsd.org (unknown [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 916011065674; Fri, 24 Jun 2011 16:22:12 +0000 (UTC) (envelope-from tinderbox@freebsd.org) Received: from freebsd-current.sentex.ca (freebsd-current.sentex.ca [64.7.128.98]) by mx1.freebsd.org (Postfix) with ESMTP id 60E2F8FC12; Fri, 24 Jun 2011 16:22:12 +0000 (UTC) Received: from freebsd-current.sentex.ca (localhost [127.0.0.1]) by freebsd-current.sentex.ca (8.14.4/8.14.4) with ESMTP id p5OGMBuJ068665; Fri, 24 Jun 2011 12:22:11 -0400 (EDT) (envelope-from tinderbox@freebsd.org) Received: (from tinderbox@localhost) by freebsd-current.sentex.ca (8.14.4/8.14.4/Submit) id p5OGMBfq068661; Fri, 24 Jun 2011 16:22:11 GMT (envelope-from tinderbox@freebsd.org) Date: Fri, 24 Jun 2011 16:22:11 GMT Message-Id: <201106241622.p5OGMBfq068661@freebsd-current.sentex.ca> X-Authentication-Warning: freebsd-current.sentex.ca: tinderbox set sender to FreeBSD Tinderbox using -f Sender: FreeBSD Tinderbox From: FreeBSD Tinderbox To: FreeBSD Tinderbox , , Precedence: bulk Cc: Subject: [head tinderbox] failure on arm/arm X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 24 Jun 2011 16:22:12 -0000 TB --- 2011-06-24 15:20:00 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-24 15:20:00 - starting HEAD tinderbox run for arm/arm TB --- 2011-06-24 15:20:00 - cleaning the object tree TB --- 2011-06-24 15:20:20 - cvsupping the source tree TB --- 2011-06-24 15:20:20 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/arm/arm/supfile TB --- 2011-06-24 15:21:08 - building world TB --- 2011-06-24 15:21:08 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-24 15:21:08 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-24 15:21:08 - TARGET=arm TB --- 2011-06-24 15:21:08 - TARGET_ARCH=arm TB --- 2011-06-24 15:21:08 - TZ=UTC TB --- 2011-06-24 15:21:08 - __MAKE_CONF=/dev/null TB --- 2011-06-24 15:21:08 - cd /src TB --- 2011-06-24 15:21:08 - /usr/bin/make -B buildworld >>> World build started on Fri Jun 24 15:21:09 UTC 2011 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries >>> stage 4.3: make dependencies >>> stage 4.4: building everything >>> World build completed on Fri Jun 24 16:14:37 UTC 2011 TB --- 2011-06-24 16:14:37 - WARNING: no kernel config for LINT TB --- 2011-06-24 16:14:37 - cd /src/sys/arm/conf TB --- 2011-06-24 16:14:37 - /usr/sbin/config -m AVILA TB --- 2011-06-24 16:14:38 - building AVILA kernel TB --- 2011-06-24 16:14:38 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-24 16:14:38 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-24 16:14:38 - TARGET=arm TB --- 2011-06-24 16:14:38 - TARGET_ARCH=arm TB --- 2011-06-24 16:14:38 - TZ=UTC TB --- 2011-06-24 16:14:38 - __MAKE_CONF=/dev/null TB --- 2011-06-24 16:14:38 - cd /src TB --- 2011-06-24 16:14:38 - /usr/bin/make -B buildkernel KERNCONF=AVILA >>> Kernel build for AVILA started on Fri Jun 24 16:14:38 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything >>> Kernel build for AVILA completed on Fri Jun 24 16:17:30 UTC 2011 TB --- 2011-06-24 16:17:31 - cd /src/sys/arm/conf TB --- 2011-06-24 16:17:31 - /usr/sbin/config -m BWCT TB --- 2011-06-24 16:17:31 - building BWCT kernel TB --- 2011-06-24 16:17:31 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-24 16:17:31 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-24 16:17:31 - TARGET=arm TB --- 2011-06-24 16:17:31 - TARGET_ARCH=arm TB --- 2011-06-24 16:17:31 - TZ=UTC TB --- 2011-06-24 16:17:31 - __MAKE_CONF=/dev/null TB --- 2011-06-24 16:17:31 - cd /src TB --- 2011-06-24 16:17:31 - /usr/bin/make -B buildkernel KERNCONF=BWCT >>> Kernel build for BWCT started on Fri Jun 24 16:17:31 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything >>> Kernel build for BWCT completed on Fri Jun 24 16:19:30 UTC 2011 TB --- 2011-06-24 16:19:30 - cd /src/sys/arm/conf TB --- 2011-06-24 16:19:30 - /usr/sbin/config -m CAMBRIA TB --- 2011-06-24 16:19:30 - building CAMBRIA kernel TB --- 2011-06-24 16:19:30 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-24 16:19:30 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-24 16:19:30 - TARGET=arm TB --- 2011-06-24 16:19:30 - TARGET_ARCH=arm TB --- 2011-06-24 16:19:30 - TZ=UTC TB --- 2011-06-24 16:19:30 - __MAKE_CONF=/dev/null TB --- 2011-06-24 16:19:30 - cd /src TB --- 2011-06-24 16:19:30 - /usr/bin/make -B buildkernel KERNCONF=CAMBRIA >>> Kernel build for CAMBRIA started on Fri Jun 24 16:19:31 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything [...] /src/sys/dev/ath/ath_hal/ah.c:897: undefined reference to `ath_hal_debug' ah.o: In function `ath_hal_setTxQProps': /src/sys/dev/ath/ath_hal/ah.c:870: undefined reference to `ath_hal_debug' ah.o: In function `ath_hal_get_mimo_chan_noise': /src/sys/dev/ath/ath_hal/ah.c:1003: undefined reference to `ath_hal_debug' ah.o: In function `ath_hal_getChanNoise': /src/sys/dev/ath/ath_hal/ah.c:929: undefined reference to `ath_hal_debug' ah.o:/src/sys/dev/ath/ath_hal/ah.c:223: more undefined references to `ath_hal_debug' follow *** Error code 1 Stop in /obj/arm.arm/src/sys/CAMBRIA. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-24 16:22:10 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-24 16:22:10 - ERROR: failed to build CAMBRIA kernel TB --- 2011-06-24 16:22:10 - 2658.50 user 773.13 system 3729.78 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-arm-arm.full From owner-freebsd-arm@FreeBSD.ORG Fri Jun 24 22:12:46 2011 Return-Path: Delivered-To: arm@freebsd.org Received: from mx1.freebsd.org (unknown [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 38475106566C; Fri, 24 Jun 2011 22:12:46 +0000 (UTC) (envelope-from tinderbox@freebsd.org) Received: from freebsd-current.sentex.ca (freebsd-current.sentex.ca [64.7.128.98]) by mx1.freebsd.org (Postfix) with ESMTP id E3F4B8FC08; Fri, 24 Jun 2011 22:12:45 +0000 (UTC) Received: from freebsd-current.sentex.ca (localhost [127.0.0.1]) by freebsd-current.sentex.ca (8.14.4/8.14.4) with ESMTP id p5OMCiRl030292; Fri, 24 Jun 2011 18:12:44 -0400 (EDT) (envelope-from tinderbox@freebsd.org) Received: (from tinderbox@localhost) by freebsd-current.sentex.ca (8.14.4/8.14.4/Submit) id p5OMCits030291; Fri, 24 Jun 2011 22:12:44 GMT (envelope-from tinderbox@freebsd.org) Date: Fri, 24 Jun 2011 22:12:44 GMT Message-Id: <201106242212.p5OMCits030291@freebsd-current.sentex.ca> X-Authentication-Warning: freebsd-current.sentex.ca: tinderbox set sender to FreeBSD Tinderbox using -f Sender: FreeBSD Tinderbox From: FreeBSD Tinderbox To: FreeBSD Tinderbox , , Precedence: bulk Cc: Subject: [head tinderbox] failure on arm/arm X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 24 Jun 2011 22:12:46 -0000 TB --- 2011-06-24 21:10:00 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-24 21:10:00 - starting HEAD tinderbox run for arm/arm TB --- 2011-06-24 21:10:00 - cleaning the object tree TB --- 2011-06-24 21:10:20 - cvsupping the source tree TB --- 2011-06-24 21:10:20 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/arm/arm/supfile TB --- 2011-06-24 21:10:50 - building world TB --- 2011-06-24 21:10:50 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-24 21:10:50 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-24 21:10:50 - TARGET=arm TB --- 2011-06-24 21:10:50 - TARGET_ARCH=arm TB --- 2011-06-24 21:10:50 - TZ=UTC TB --- 2011-06-24 21:10:50 - __MAKE_CONF=/dev/null TB --- 2011-06-24 21:10:50 - cd /src TB --- 2011-06-24 21:10:50 - /usr/bin/make -B buildworld >>> World build started on Fri Jun 24 21:10:50 UTC 2011 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries >>> stage 4.3: make dependencies >>> stage 4.4: building everything >>> World build completed on Fri Jun 24 22:05:13 UTC 2011 TB --- 2011-06-24 22:05:13 - WARNING: no kernel config for LINT TB --- 2011-06-24 22:05:13 - cd /src/sys/arm/conf TB --- 2011-06-24 22:05:13 - /usr/sbin/config -m AVILA TB --- 2011-06-24 22:05:13 - building AVILA kernel TB --- 2011-06-24 22:05:13 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-24 22:05:13 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-24 22:05:13 - TARGET=arm TB --- 2011-06-24 22:05:13 - TARGET_ARCH=arm TB --- 2011-06-24 22:05:13 - TZ=UTC TB --- 2011-06-24 22:05:13 - __MAKE_CONF=/dev/null TB --- 2011-06-24 22:05:13 - cd /src TB --- 2011-06-24 22:05:13 - /usr/bin/make -B buildkernel KERNCONF=AVILA >>> Kernel build for AVILA started on Fri Jun 24 22:05:13 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything >>> Kernel build for AVILA completed on Fri Jun 24 22:08:05 UTC 2011 TB --- 2011-06-24 22:08:05 - cd /src/sys/arm/conf TB --- 2011-06-24 22:08:05 - /usr/sbin/config -m BWCT TB --- 2011-06-24 22:08:05 - building BWCT kernel TB --- 2011-06-24 22:08:05 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-24 22:08:05 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-24 22:08:05 - TARGET=arm TB --- 2011-06-24 22:08:05 - TARGET_ARCH=arm TB --- 2011-06-24 22:08:05 - TZ=UTC TB --- 2011-06-24 22:08:05 - __MAKE_CONF=/dev/null TB --- 2011-06-24 22:08:05 - cd /src TB --- 2011-06-24 22:08:05 - /usr/bin/make -B buildkernel KERNCONF=BWCT >>> Kernel build for BWCT started on Fri Jun 24 22:08:05 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything >>> Kernel build for BWCT completed on Fri Jun 24 22:10:03 UTC 2011 TB --- 2011-06-24 22:10:03 - cd /src/sys/arm/conf TB --- 2011-06-24 22:10:03 - /usr/sbin/config -m CAMBRIA TB --- 2011-06-24 22:10:03 - building CAMBRIA kernel TB --- 2011-06-24 22:10:03 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-24 22:10:03 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-24 22:10:03 - TARGET=arm TB --- 2011-06-24 22:10:03 - TARGET_ARCH=arm TB --- 2011-06-24 22:10:03 - TZ=UTC TB --- 2011-06-24 22:10:03 - __MAKE_CONF=/dev/null TB --- 2011-06-24 22:10:03 - cd /src TB --- 2011-06-24 22:10:03 - /usr/bin/make -B buildkernel KERNCONF=CAMBRIA >>> Kernel build for CAMBRIA started on Fri Jun 24 22:10:03 UTC 2011 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything [...] /src/sys/dev/ath/ath_hal/ah.c:897: undefined reference to `ath_hal_debug' ah.o: In function `ath_hal_setTxQProps': /src/sys/dev/ath/ath_hal/ah.c:870: undefined reference to `ath_hal_debug' ah.o: In function `ath_hal_get_mimo_chan_noise': /src/sys/dev/ath/ath_hal/ah.c:1003: undefined reference to `ath_hal_debug' ah.o: In function `ath_hal_getChanNoise': /src/sys/dev/ath/ath_hal/ah.c:929: undefined reference to `ath_hal_debug' ah.o:/src/sys/dev/ath/ath_hal/ah.c:223: more undefined references to `ath_hal_debug' follow *** Error code 1 Stop in /obj/arm.arm/src/sys/CAMBRIA. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-24 22:12:43 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-24 22:12:43 - ERROR: failed to build CAMBRIA kernel TB --- 2011-06-24 22:12:43 - 2697.48 user 785.24 system 3763.68 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-arm-arm.full From owner-freebsd-arm@FreeBSD.ORG Fri Jun 24 22:27:21 2011 Return-Path: Delivered-To: freebsd-arm@freebsd.org Received: from mx1.freebsd.org (unknown [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B195510656A6 for ; Fri, 24 Jun 2011 22:27:21 +0000 (UTC) (envelope-from damjan.marion@gmail.com) Received: from mail-fx0-f54.google.com (mail-fx0-f54.google.com [209.85.161.54]) by mx1.freebsd.org (Postfix) with ESMTP id 33E6B8FC14 for ; Fri, 24 Jun 2011 22:27:20 +0000 (UTC) Received: by fxe4 with SMTP id 4so428526fxe.13 for ; Fri, 24 Jun 2011 15:27:20 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:subject:mime-version:content-type:from :in-reply-to:date:cc:content-transfer-encoding:message-id:references :to:x-mailer; bh=kegl0qDY8m8lCseq4usrq4en9o54frUIWgglVS6UOc8=; b=Zen4nsGQ3FPuuHIxHFDOpUms3K+0C1Mn6mFPJhHMHvUAXC5AjibI0J/PPqhvAlHO3Z nUQzkKFc+2BJpqfBpmdY/fAI6B0wrPhFqLStdkg7RElUP2R0f4jXFzHnmDoQH8xIh7tU iZInw1oIEk2dwgw9m9sartC0RaJ5uBHasTTko= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=subject:mime-version:content-type:from:in-reply-to:date:cc :content-transfer-encoding:message-id:references:to:x-mailer; b=WzxXRuK7/0W/AN4tNsu3dOfE4IE2Zwj+KKjZMDJPyxMJ4dzhxVk22cXbpbqXRZsEu3 Ozkq1JrmeL+gWCZyKjrhvGPP8mk/6wPTA4oXydUfwuUUiCntIGVxSDXVTkHvxDnRaeiQ iCTL0eeMFCVI6zXxSEk6YFaTpmiVvijZdzCIQ= Received: by 10.223.6.198 with SMTP id a6mr5079423faa.130.1308954439912; Fri, 24 Jun 2011 15:27:19 -0700 (PDT) Received: from [192.168.123.4] (cpe-109-60-79-155.zg3.cable.xnet.hr [109.60.79.155]) by mx.google.com with ESMTPS id q14sm1912608faa.27.2011.06.24.15.27.18 (version=TLSv1/SSLv3 cipher=OTHER); Fri, 24 Jun 2011 15:27:19 -0700 (PDT) Mime-Version: 1.0 (Apple Message framework v1084) Content-Type: text/plain; charset=us-ascii From: Damjan Marion In-Reply-To: Date: Sat, 25 Jun 2011 00:27:17 +0200 Content-Transfer-Encoding: quoted-printable Message-Id: <2BED6A06-884D-4501-B5AD-776BB17B7891@gmail.com> References: To: Mohammed Farrag X-Mailer: Apple Mail (2.1084) Cc: freebsd-arm@freebsd.org Subject: Re: OMAP4 and Debugging Symbols questions X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 24 Jun 2011 22:27:22 -0000 On Jun 24, 2011, at 2:25 PM, Mohammed Farrag wrote: > Hello FreeBSDers, >=20 > I am working on bringing freebsd to new hardware. One of the = problems I > faced is OMAP4 emulation (pandaboard). Unfortuantely, it's only = supported on > CCSv4 and virtio so for large debug info, I used Code Composer Studio = but I > was asked for loading symbols for debugging which is vmlinux in Linux. > Unfortunately, I don't have strong knowledge in Linux. So, What is the > similar file to this one in FreeBSD? >=20 > Also, Will be there differences in making process for building for > pandaboard target or I should add paramters for OMAP4 make? Hi Mohammed, What do you exactly mean by "OMAP4 Emulation" ? OMAP4 is is currently not supported on freebsd, there are some ongoing = efforts to introduce support for OMAP4 but that requires lot of work including ARMv7 support and SMP. There is working tree of OMAP4 code at: http://gitorious.org/+freebsd-omap-team/freebsd/freebsd-omap Mainly developed by Ben Grey. Regards, Damjan= From owner-freebsd-arm@FreeBSD.ORG Sat Jun 25 00:15:05 2011 Return-Path: Delivered-To: freebsd-arm@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3CA57106566C for ; Sat, 25 Jun 2011 00:15:05 +0000 (UTC) (envelope-from eng.mufic@gmail.com) Received: from mail-pz0-f54.google.com (mail-pz0-f54.google.com [209.85.210.54]) by mx1.freebsd.org (Postfix) with ESMTP id 083528FC0C for ; Sat, 25 Jun 2011 00:15:04 +0000 (UTC) Received: by pzk27 with SMTP id 27so2733037pzk.13 for ; Fri, 24 Jun 2011 17:15:04 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type; bh=Q+FKbtd4dR164j+VwWRx/jKeKMgGxEfFScRKFyse0/w=; b=VUL6wbZv/fIbzM12U6LrWJB7GgeILJZ3EqK5/Ck8eKaRsSLJuxixMzqUwHTELYAJi0 smHAcHCX+6xVRp1jQFj1x5UA7KshYWTZGdqKKrBfJvA4A/TaHVNkh7rY27LPRR3BK4TX qCqatULAFljPe6Dkm/O5vr7gxS6CD3ZBBLvwE= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type; b=FFsDfXCFGcbtFuVDvYMn72RyWpIhHy5q6bsDo53lYs8T2T0ZPIm6tBUzRJTxXcWElR yZmzKxLfW3LXnnbhfJMfIywR2Ngf/cSIhVVYx6EULefho0K1ryc9VQXgNe2ipnu2xZhu mY6y82hZqOt7KTptXJmSdy60qE9ch2ECLhDrs= MIME-Version: 1.0 Received: by 10.68.39.3 with SMTP id l3mr2145899pbk.488.1308960904442; Fri, 24 Jun 2011 17:15:04 -0700 (PDT) Sender: eng.mufic@gmail.com Received: by 10.68.60.6 with HTTP; Fri, 24 Jun 2011 17:15:04 -0700 (PDT) In-Reply-To: <2BED6A06-884D-4501-B5AD-776BB17B7891@gmail.com> References: <2BED6A06-884D-4501-B5AD-776BB17B7891@gmail.com> Date: Sat, 25 Jun 2011 03:15:04 +0300 X-Google-Sender-Auth: je0-RMk-tafXYK48LRQ3qWypUm8 Message-ID: From: Mohammed Farrag To: Damjan Marion Content-Type: text/plain; charset=ISO-8859-1 X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-arm@freebsd.org Subject: Re: OMAP4 and Debugging Symbols questions X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 25 Jun 2011 00:15:05 -0000 Hi Damjan, I will emulate OMAP4 kernel on another platform by building the image and emulating it on another platform as I did with OMAP3 on linux host. I need to know the debugging symbols file I should load. I have previous knowledge about the omap branch but still preparing my emulation process to test the code. Regards, Mohammed On Sat, Jun 25, 2011 at 1:27 AM, Damjan Marion wrote: > > On Jun 24, 2011, at 2:25 PM, Mohammed Farrag wrote: > > > Hello FreeBSDers, > > > > I am working on bringing freebsd to new hardware. One of the problems I > > faced is OMAP4 emulation (pandaboard). Unfortuantely, it's only supported > on > > CCSv4 and virtio so for large debug info, I used Code Composer Studio but > I > > was asked for loading symbols for debugging which is vmlinux in Linux. > > Unfortunately, I don't have strong knowledge in Linux. So, What is the > > similar file to this one in FreeBSD? > > > > Also, Will be there differences in making process for building for > > pandaboard target or I should add paramters for OMAP4 make? > > Hi Mohammed, > > What do you exactly mean by "OMAP4 Emulation" ? > > OMAP4 is is currently not supported on freebsd, there are some ongoing > efforts > to introduce support for OMAP4 but that requires lot of work including > ARMv7 support and SMP. > > There is working tree of OMAP4 code at: > > http://gitorious.org/+freebsd-omap-team/freebsd/freebsd-omap > > Mainly developed by Ben Grey. > > Regards, > > Damjan -- *Mohammed Farrag* *FreeBSD Contributor* From owner-freebsd-arm@FreeBSD.ORG Sat Jun 25 01:06:10 2011 Return-Path: Delivered-To: arm@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A7F19106564A; Sat, 25 Jun 2011 01:06:10 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-gy0-f182.google.com (mail-gy0-f182.google.com [209.85.160.182]) by mx1.freebsd.org (Postfix) with ESMTP id 3A6178FC08; Sat, 25 Jun 2011 01:06:09 +0000 (UTC) Received: by gyf3 with SMTP id 3so1737158gyf.13 for ; Fri, 24 Jun 2011 18:06:09 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type :content-transfer-encoding; bh=cCjEvsmo/5u9nBRMlq+/YZNkzr1MushFcsjIqieCN9c=; b=CQVl1pyao44Nb7d1ol0BKAe6eqRTmfDbp6tFKFE1hN6G9+Amapa8Kgu7jzdsQpTuQQ xgd5U4cHbJDgVzX1oiIJwH7YRbsaySaOx0yXYMGLpeYS4bao80R+BtrsvnqAtBY9k/fc C2Ew3BR8BxGctUh1gzzyj6g6fkGkaS2rRE+7Y= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type :content-transfer-encoding; b=MSi04ueaP0rNqJCQhxaFLsjZP6B3K4nbRRvi79qu+NI6uVU6PsVTl7XrrUDGCI05zv A0bqD8mFv6TRLaTF8S7faVpOWzpA8XLtL5JHrg1+FG54hD4pxwceksi+TeDtf7FTf7is zErHcAxgd6fz6dSXM/ajy8/sQg/irZId0h8Oc= MIME-Version: 1.0 Received: by 10.150.165.14 with SMTP id n14mr4100966ybe.408.1308962092732; Fri, 24 Jun 2011 17:34:52 -0700 (PDT) Sender: adrian.chadd@gmail.com Received: by 10.150.146.13 with HTTP; Fri, 24 Jun 2011 17:34:52 -0700 (PDT) In-Reply-To: <201106242212.p5OMCits030291@freebsd-current.sentex.ca> References: <201106242212.p5OMCits030291@freebsd-current.sentex.ca> Date: Sat, 25 Jun 2011 08:34:52 +0800 X-Google-Sender-Auth: 560uWGCwiOhnMDrb5AhC7RidBM4 Message-ID: From: Adrian Chadd To: FreeBSD Tinderbox Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Cc: arm@freebsd.org, current@freebsd.org Subject: Re: [head tinderbox] failure on arm/arm X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 25 Jun 2011 01:06:10 -0000 Fixed! Sorry. Adrian On 25 June 2011 06:12, FreeBSD Tinderbox wrote: > TB --- 2011-06-24 21:10:00 - tinderbox 2.7 running on freebsd-current.sen= tex.ca > TB --- 2011-06-24 21:10:00 - starting HEAD tinderbox run for arm/arm > TB --- 2011-06-24 21:10:00 - cleaning the object tree > TB --- 2011-06-24 21:10:20 - cvsupping the source tree > TB --- 2011-06-24 21:10:20 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sente= x.ca /tinderbox/HEAD/arm/arm/supfile > TB --- 2011-06-24 21:10:50 - building world > TB --- 2011-06-24 21:10:50 - MAKEOBJDIRPREFIX=3D/obj > TB --- 2011-06-24 21:10:50 - PATH=3D/usr/bin:/usr/sbin:/bin:/sbin > TB --- 2011-06-24 21:10:50 - TARGET=3Darm > TB --- 2011-06-24 21:10:50 - TARGET_ARCH=3Darm > TB --- 2011-06-24 21:10:50 - TZ=3DUTC > TB --- 2011-06-24 21:10:50 - __MAKE_CONF=3D/dev/null > TB --- 2011-06-24 21:10:50 - cd /src > TB --- 2011-06-24 21:10:50 - /usr/bin/make -B buildworld >>>> World build started on Fri Jun 24 21:10:50 UTC 2011 >>>> Rebuilding the temporary build tree >>>> stage 1.1: legacy release compatibility shims >>>> stage 1.2: bootstrap tools >>>> stage 2.1: cleaning up the object tree >>>> stage 2.2: rebuilding the object tree >>>> stage 2.3: build tools >>>> stage 3: cross tools >>>> stage 4.1: building includes >>>> stage 4.2: building libraries >>>> stage 4.3: make dependencies >>>> stage 4.4: building everything >>>> World build completed on Fri Jun 24 22:05:13 UTC 2011 > TB --- 2011-06-24 22:05:13 - WARNING: no kernel config for LINT > TB --- 2011-06-24 22:05:13 - cd /src/sys/arm/conf > TB --- 2011-06-24 22:05:13 - /usr/sbin/config -m AVILA > TB --- 2011-06-24 22:05:13 - building AVILA kernel > TB --- 2011-06-24 22:05:13 - MAKEOBJDIRPREFIX=3D/obj > TB --- 2011-06-24 22:05:13 - PATH=3D/usr/bin:/usr/sbin:/bin:/sbin > TB --- 2011-06-24 22:05:13 - TARGET=3Darm > TB --- 2011-06-24 22:05:13 - TARGET_ARCH=3Darm > TB --- 2011-06-24 22:05:13 - TZ=3DUTC > TB --- 2011-06-24 22:05:13 - __MAKE_CONF=3D/dev/null > TB --- 2011-06-24 22:05:13 - cd /src > TB --- 2011-06-24 22:05:13 - /usr/bin/make -B buildkernel KERNCONF=3DAVIL= A >>>> Kernel build for AVILA started on Fri Jun 24 22:05:13 UTC 2011 >>>> stage 1: configuring the kernel >>>> stage 2.1: cleaning up the object tree >>>> stage 2.2: rebuilding the object tree >>>> stage 2.3: build tools >>>> stage 3.1: making dependencies >>>> stage 3.2: building everything >>>> Kernel build for AVILA completed on Fri Jun 24 22:08:05 UTC 2011 > TB --- 2011-06-24 22:08:05 - cd /src/sys/arm/conf > TB --- 2011-06-24 22:08:05 - /usr/sbin/config -m BWCT > TB --- 2011-06-24 22:08:05 - building BWCT kernel > TB --- 2011-06-24 22:08:05 - MAKEOBJDIRPREFIX=3D/obj > TB --- 2011-06-24 22:08:05 - PATH=3D/usr/bin:/usr/sbin:/bin:/sbin > TB --- 2011-06-24 22:08:05 - TARGET=3Darm > TB --- 2011-06-24 22:08:05 - TARGET_ARCH=3Darm > TB --- 2011-06-24 22:08:05 - TZ=3DUTC > TB --- 2011-06-24 22:08:05 - __MAKE_CONF=3D/dev/null > TB --- 2011-06-24 22:08:05 - cd /src > TB --- 2011-06-24 22:08:05 - /usr/bin/make -B buildkernel KERNCONF=3DBWCT >>>> Kernel build for BWCT started on Fri Jun 24 22:08:05 UTC 2011 >>>> stage 1: configuring the kernel >>>> stage 2.1: cleaning up the object tree >>>> stage 2.2: rebuilding the object tree >>>> stage 2.3: build tools >>>> stage 3.1: making dependencies >>>> stage 3.2: building everything >>>> Kernel build for BWCT completed on Fri Jun 24 22:10:03 UTC 2011 > TB --- 2011-06-24 22:10:03 - cd /src/sys/arm/conf > TB --- 2011-06-24 22:10:03 - /usr/sbin/config -m CAMBRIA > TB --- 2011-06-24 22:10:03 - building CAMBRIA kernel > TB --- 2011-06-24 22:10:03 - MAKEOBJDIRPREFIX=3D/obj > TB --- 2011-06-24 22:10:03 - PATH=3D/usr/bin:/usr/sbin:/bin:/sbin > TB --- 2011-06-24 22:10:03 - TARGET=3Darm > TB --- 2011-06-24 22:10:03 - TARGET_ARCH=3Darm > TB --- 2011-06-24 22:10:03 - TZ=3DUTC > TB --- 2011-06-24 22:10:03 - __MAKE_CONF=3D/dev/null > TB --- 2011-06-24 22:10:03 - cd /src > TB --- 2011-06-24 22:10:03 - /usr/bin/make -B buildkernel KERNCONF=3DCAMB= RIA >>>> Kernel build for CAMBRIA started on Fri Jun 24 22:10:03 UTC 2011 >>>> stage 1: configuring the kernel >>>> stage 2.1: cleaning up the object tree >>>> stage 2.2: rebuilding the object tree >>>> stage 2.3: build tools >>>> stage 3.1: making dependencies >>>> stage 3.2: building everything > [...] > /src/sys/dev/ath/ath_hal/ah.c:897: undefined reference to `ath_hal_debug' > ah.o: In function `ath_hal_setTxQProps': > /src/sys/dev/ath/ath_hal/ah.c:870: undefined reference to `ath_hal_debug' > ah.o: In function `ath_hal_get_mimo_chan_noise': > /src/sys/dev/ath/ath_hal/ah.c:1003: undefined reference to `ath_hal_debug= ' > ah.o: In function `ath_hal_getChanNoise': > /src/sys/dev/ath/ath_hal/ah.c:929: undefined reference to `ath_hal_debug' > ah.o:/src/sys/dev/ath/ath_hal/ah.c:223: more undefined references to `ath= _hal_debug' follow > *** Error code 1 > > Stop in /obj/arm.arm/src/sys/CAMBRIA. > *** Error code 1 > > Stop in /src. > *** Error code 1 > > Stop in /src. > TB --- 2011-06-24 22:12:43 - WARNING: /usr/bin/make returned exit code = =A01 > TB --- 2011-06-24 22:12:43 - ERROR: failed to build CAMBRIA kernel > TB --- 2011-06-24 22:12:43 - 2697.48 user 785.24 system 3763.68 real > > > http://tinderbox.freebsd.org/tinderbox-head-HEAD-arm-arm.full > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org= " >