From owner-freebsd-mobile  Tue Mar  5 12:17:44 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from web21302.mail.yahoo.com (web21302.mail.yahoo.com [216.136.173.210])
	by hub.freebsd.org (Postfix) with SMTP id 10D2F37B416
	for <freebsd-mobile@freebsd.org>; Tue,  5 Mar 2002 12:17:11 -0800 (PST)
Message-ID: <20020305201710.37742.qmail@web21302.mail.yahoo.com>
Received: from [64.12.101.181] by web21302.mail.yahoo.com via HTTP; Tue, 05 Mar 2002 12:17:10 PST
Date: Tue, 5 Mar 2002 12:17:10 -0800 (PST)
From: Brian Howell <bsdmobile@yahoo.com>
Subject: Re: Test this please
To: "M. Warner Losh" <imp@village.org>
Cc: freebsd-mobile@freebsd.org
In-Reply-To: <20020304.211034.79163308.imp@village.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

No actually i hadnt done boot -v.i am a relative
newbie.so learnt how to do it and so here's the
verbose dmesg.Hope it helps.
Brian

-------------------------------------------------------
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory  = 67108864 (65536K bytes)
avail memory = 60293120 (58880K bytes)
Preloaded elf kernel "kernel" at 0xc04ee000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdf50
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on
motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443LX (440 LX) PCI-PCI (AGP) bridge>
at device 1.0 on 
pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0
on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port
0xfcd0-0xfcdf at device 
7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port
0xfce0-0xfcff irq 
9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on
uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller>
port 0x7000-0x700f 
at device 7.3 on pci0
pci0: <ATI Mach64-GU graphics accelerator> at 13.0
tx0: <SMC EtherPower II 10/100> port 0xf400-0xf4ff mem

0xfedfe000-0xfedfefff irq 11 at device 14.0 on pci0
miibus0: <MII bus> on tx0
qsphy0: <QS6612 10/100 media interface> on miibus0
qsphy0:  10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
tx0: address 00:e0:29:11:6d:85, type SMC9432TX
pcm0: <AudioPCI ES1371-A> port 0xfc40-0xfc7f irq 10 at
device 15.0 on 
pci0
pci_cfgintr_search: linked (63) to configured irq 10
at 0:15:0
pci_cfgintr: 0:16 INTA routed to irq 10
pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 10 at
device 16.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [pwr save][CSC parallel
isa irq]
pccard0: <PC Card bus (classic)> on pcic0
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xe8000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on 
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on 
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 4112MB <WDC AC24300L> [8912/15/63] at ata0-master
UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-6102B> at ata1-master
using PIO3
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 0
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 
1994
	The Regents of the University of California. All
rights reserved.
FreeBSD 4.5-STABLE #0: Mon Mar  4 19:39:14 EST 2002
    root@coit2.uncc.edu:/usr/src/sys/compile/MYKERN
Calibrating clock(s) ... TSC clock: 266618779 Hz,
i8254 clock: 1193202 
Hz
CLK_USE_I8254_CALIBRATION not specified - using
default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old
calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (266.62-MHz
686-class CPU)
  Origin = "GenuineIntel"  Id = 0x633  Stepping = 3
  
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory  = 67108864 (65536K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00515000 - 0x03ff7fff, 61747200 bytes (15075 pages)
avail memory = 60293120 (58880K bytes)
bios32: Found BIOS32 Service Directory header at
0xc00f73f0
bios32: Entry = 0xfd7b1 (c00fd7b1)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0x21c
pnpbios: Found PnP BIOS data at 0xc00f7410
pnpbios: Entry = f0000:b7f8  Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc04ee000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is
there (id=71808086)
Using $PIR table, 7 entries at 0xc00fdf50
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on
motherboard
found->	vendor=0x8086, dev=0x7180, revid=0x03
	class=06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[10]: type 1, range 32, base f8000000, size 26
found->	vendor=0x8086, dev=0x7181, revid=0x03
	class=06-04-00, hdrtype=0x01, mfdev=0
	subordinatebus=1 	secondarybus=1
found->	vendor=0x8086, dev=0x7110, revid=0x01
	class=06-01-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x8086, dev=0x7111, revid=0x01
	class=01-01-80, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[20]: type 1, range 32, base 0000fcd0, size  4
found->	vendor=0x8086, dev=0x7112, revid=0x01
	class=0c-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=d, irq=9
	map[20]: type 1, range 32, base 0000fce0, size  5
found->	vendor=0x8086, dev=0x7113, revid=0x01
	class=06-80-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[90]: type 1, range 32, base 00007000, size  4
found->	vendor=0x1002, dev=0x4755, revid=0x9a
	class=03-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[10]: type 1, range 32, base fd000000, size 24
	map[14]: type 1, range 32, base 0000f800, size  8
	map[18]: type 1, range 32, base fedff000, size 12
found->	vendor=0x10b8, dev=0x0005, revid=0x06
	class=02-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base 0000f400, size  8
	map[14]: type 1, range 32, base fedfe000, size 12
found->	vendor=0x1274, dev=0x1371, revid=0x02
	class=04-01-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=10
	map[10]: type 1, range 32, base 0000fc40, size  6
found->	vendor=0x104c, dev=0xac50, revid=0x01
	class=06-07-00, hdrtype=0x02, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=255
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443LX (440 LX) PCI-PCI (AGP) bridge>
at device 1.0 on 
pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0
on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port
0xfcd0-0xfcdf at device 
7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcd0
ata0: mask=03 status0=52 status1=02
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcd8
ata1: mask=01 status0=50 status1=ff
ata1: mask=01 ostat0=50 ostat2=ff
ata1-master: ATAPI probe a=14 b=eb
ata1: mask=01 status0=00 status1=ff
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port
0xfce0-0xfcff irq 
9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on
uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller>
port 0x7000-0x700f 
at device 7.3 on pci0
pci0: <ATI Mach64-GU graphics accelerator>
(vendor=0x1002, dev=0x4755) 
at 13.0
tx0: <SMC EtherPower II 10/100> port 0xf400-0xf4ff mem

0xfedfe000-0xfedfefff irq 11 at device 14.0 on pci0
miibus0: <MII bus> on tx0
qsphy0: <QS6612 10/100 media interface> on miibus0
qsphy0:  10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
tx0: address 00:e0:29:11:6d:85, type SMC9432TX
bpf: tx0 attached
pcm0: <AudioPCI ES1371-A> port 0xfc40-0xfc7f irq 10 at
device 15.0 on 
pci0
pcm0: ac97 codec id 0x54524103 (TriTech TR?????)
pcm0: ac97 codec features 6 bit master volume, no 3D
Stereo Enhancement
pcm: setmap 3dcd000, 1000; 0xc0cd9000 -> 3dcd000
pcm: setmap 3dcf000, 1000; 0xc0cdb000 -> 3dcf000
pci_cfgintr_search: linked (63) to configured irq 10
at 0:15:0
pci_cfgintr: 0:16 INTA routed to irq 10
pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 10 at
device 16.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [pwr save][CSC parallel
isa irq]
	using shared irq10.
pcic0: PCI Configuration space:
  0x00: 0xac50104c 0x02100003 0x06070001 0x00020000 
  0x10: 0x44000000 0x020000a0 0x00000000 0x00000000 
  0x20: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x30: 0x00000000 0x00000000 0x00000000 0x07e0010a 
  0x40: 0x3000133f 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x08449060 0x00000000 0x00000000 0x00001d92 
  0x90: 0x600200c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe110001 0x00c00000 0x0000000a 0x0000001f 
  0xb0: 0x08000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pccard0: <PC Card bus (classic)> on pcic0
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
pcic-: pcic0 exists, using next available unit number
pcic-: pcic1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xe8000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on 
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1,
flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on 
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0
size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons
terminal)
pcic1 failed to probe at port 0x3e0 iomem 0xd0000 on
isa0
pcic2: not probed (disabled)
sio0: irq maps: 0x241 0x251 0x241 0x241
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x241 0x249 0x241 0x241
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000
irq 10 on isa0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10
on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on
isa0
cs0 failed to probe at port 0x300-0x31f on isa0
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:020afe3f 0..522=523 cylinders, 0..254=255 heads,
1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c240, tty 63149a, net 671c9a
bpf: sl0 attached
bpf: faith0 attached
ata0-master: success setting UDMA2 on Intel chip
Creating DISK ad0
ad0: <WDC AC24300L/09.09M08> ATA-4 disk at ata0-master
ad0: 4112MB (8421840 sectors), 8912 cyls, 15 heads, 63
S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
ad0: 4112MB <WDC AC24300L> [8912/15/63] at ata0-master
UDMA33
ata1-master: piomode=3 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO3 on generic chip
acd0: <TOSHIBA CD-ROM XM-6102B/1106> CDROM drive at
ata1 as master
acd0: read 4133KB/s (34515KB/s), 256KB buffer, PIO3
acd0: Reads: CD-R, CD-RW, CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0x83, start 63, end = 48194, size 48132 :
OK
ad0s2: type 0xa5, start 48195, end = 4209029, size
4160835 : OK
WARNING: / was not properly dismounted
start_init: trying /sbin/init
pcic0: Power:Vcc=-1 Vpp=50
pcic0: Autodetected 5.0V card
pcic0: Power applied
pcic0: Output enabled
pcic0: Settling complete
Power complete.
pccard: card inserted, slot 0
pcic0: reset 1 int is ff stat is ff
pcic0: reset 2 int is ff stat is ff
pcic0: reset 3 int is ff stat is ff
Linux ELF exec handler installed


--- "M. Warner Losh" <imp@village.org> wrote:
> In message:
> <20020305013245.51144.qmail@web21301.mail.yahoo.com>
>             Brian Howell <bsdmobile@yahoo.com>
> writes:
> : Hi there.I just applied the patch and built my
> : kernel.still the machine freezes at boot time.and
> my
> : dmesg didnt show anything new (no printfs).same
> old
> : messages.i still had to take my card out to let my
> : machine complete its boot sequence. 
> 
> Did you boot -v?
> 
> Warner


__________________________________________________
Do You Yahoo!?
Try FREE Yahoo! Mail - the world's greatest free email!
http://mail.yahoo.com/

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message