From owner-freebsd-mobile Wed Feb 2 7:48:45 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from moek.pir.net (moek.pir.net [209.192.237.190]) by builder.freebsd.org (Postfix) with ESMTP id 3D335406B for ; Wed, 2 Feb 2000 07:48:38 -0800 (PST) Received: from pir by moek.pir.net with local (Exim) id 12G21B-0001NM-00 for freebsd-mobile@freebsd.org; Wed, 02 Feb 2000 10:48:33 -0500 Date: Wed, 2 Feb 2000 10:48:33 -0500 From: Peter Radcliffe To: freebsd-mobile@freebsd.org Subject: Re: FreeBSD 3.4 and Linksys ethernet card Message-ID: <20000202104833.A4486@pir.net> Mail-Followup-To: freebsd-mobile@freebsd.org References: <14488.19458.180836.204176@localhost.grauel.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <14488.19458.180836.204176@localhost.grauel.com>; from rjk@grauel.com on Wed, Feb 02, 2000 at 10:23:46AM -0500 X-fish: < Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Richard J Kuhns probably said: > I was running 3.3-PAO until yesterday, but I had hopes that I'd be able to > use `straight' -stable and so installed 3.4. I still don't see the pcmcia support in the bare releases as good enough. > As far as I can tell, everything is fine EXCEPT with my Linksys Combo > PCMCIA EthernetCard (model EC2T). Particularly for wierd cards like that :) > I performed the upgrade from 3.3-PAO by removing /usr/src, installing the > sources fresh from the 3.4 CD, and doing a `make buildworld; make > installworld'. I then built a new kernel (I based my kernel config file on > the new GENERIC and LINT) and ran mergemaster. Everything looks fine, but > when I insert the Linksys card I get the message "driver allocation failed > for Linksys" on the console. > Kernel config file: > === > device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 > === I'd change this to; ed0 at isa? port ? net irq ? disable > dmesg: > === > Initializing PC-card drivers: sio ed Odd. That looks fine. Do you get a message saying what it is trying to allocate for the card ? With 3.4-PAO I get; Card inserted, slot 0 card0: assign ep0 iobase 0x260 irq 7 ep0: utp/bnc[*UTP*] address 00:60:08:92:be:73 I did a binary 3.4-R upgrade on this laptop and then cvsup-ed PAO, which is now based on a 3.4-R kernel (in general I find the cvsuped PAO kernel less of a pain to maintain than the patching method). Seems to have worked quite well. P. -- pir pir@pir.net pir@net.tufts.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message