From owner-freebsd-current Sun Jan 30 14:23:49 2000 Delivered-To: freebsd-current@freebsd.org Received: from smtp7.atl.mindspring.net (smtp7.atl.mindspring.net [207.69.128.51]) by hub.freebsd.org (Postfix) with ESMTP id 3766F14D5A for ; Sun, 30 Jan 2000 14:23:45 -0800 (PST) (envelope-from mremski@ix.netcom.com) Received: from bsg-ma1d-13.ix.netcom.com (bsg-ma1d-13.ix.netcom.com [209.110.251.13]) by smtp7.atl.mindspring.net (8.9.3/8.8.5) with ESMTP id RAA07406; Sun, 30 Jan 2000 17:23:25 -0500 (EST) Date: Sun, 30 Jan 2000 17:25:41 -0500 (EST) From: Michael Remski To: Brian Dean Cc: "Daniel C. Sobral" , Chuck Robey , David Gilbert , "Sean O'Connell" , freebsd-current@FreeBSD.ORG Subject: Re: Printer fiascos. In-Reply-To: <200001301942.OAA53806@vger.foo.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is on 3.4 Stable, Another "me too", BUT, with a "data point". NEC SuperScript 870, ASUS MB. Had the same problem when the BIOS was set to ECP+EPP on the parallel port. Sinces it only a printer, I set the BIOS to Normal and deliberately tried to introduce the problem (pull paper tray, etc). Didn't have the problem. Two things had happened, the BIOS change and I removed the "flags 0x40" from the config file. Relevant piece of dmesg: ppc0 at 0x378 irq 7 on isa ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppb0: IEEE1284 device found /NIBBLE Probing for PnP devices on ppbus0: ppbus0: PRINTER PrintGear,PCL,PJL lpt0: on ppbus 0 lpt0: Interrupt-driven port dmesg prior to the change: ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/7 bytes threshold lpt0: on ppbus 0 lpt0: Interrupt-driven port Notice it used to say SMC-like chipset? Just a data point. m On Sun, 30 Jan 2000, Brian Dean wrote: > > For what its worth, I am able to reproduce this problem on my system. > Simply submit something to lpr, wait for the printer light to blink, > and pull the paper tray. The system hangs hard as described and does > not return to normal until the paper tray is put back in. I haven't > been able to make it do anything while the printer has the system > hung, so I haven't been able to track it down, yet. However, I > haven't had much time to spend on this problem, but thought I'd chime > in a "me too" when I saw someone had the (apparently) same problem. > > I have an HP LaserJet 4 connected to the parallel port. > > I am running -current, and a buildworld as of about a week ago. > > -Brian > -- > Brian Dean brdean@mindspring.com > > > Here's my dmesg: > > Copyright (c) 1992-2000 The FreeBSD Project. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > FreeBSD 4.0-CURRENT #0: Sun Jan 23 09:10:33 EST 2000 > bsd@vger.foo.com:/usr/src/sys/compile/VGER > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 300682757 Hz > CPU: Pentium II/Xeon/Celeron (300.68-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x652 Stepping = 2 > Features=0x183f9ff > real memory = 201326592 (196608K bytes) > avail memory = 192131072 (187628K bytes) > Preloaded elf kernel "kernel" at 0xc02f3000. > Pentium Pro MTRR support enabled > md0: Malloc disk > npx0: on motherboard > npx0: INT 16 interface > pcib0: on motherboard > pci0: on pcib0 > pcib1: at device 1.0 on pci0 > pci1: on pcib1 > isab0: at device 7.0 on pci0 > isa0: on isab0 > ata-pci0: port 0xf000-0xf00f at device 7.1 on pci0 > ata-pci0: Busmastering DMA supported > ata0 at 0x01f0 irq 14 on ata-pci0 > pci0: Intel 82371AB/EB (PIIX4) USB controller (vendor=0x8086, dev=0x7112) at 7.2 irq 11 > chip1: port 0x5000-0x500f at device 7.3 on pci0 > vga-pci0: mem 0xe5000000-0xe5ffffff,0xe4000000-0xe4ffffff irq 10 at device 9.0 on pci0 > xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xc400-0xc43f irq 5 at device 10.0 on pci0 > xl0: Ethernet address: 00:60:08:17:67:f9 > miibus0: on xl0 > nsphy0: on miibus0 > nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > ahc0: port 0xc800-0xc8ff mem 0xe9000000-0xe9000fff irq 9 at device 11.0 on pci0 > ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs > pci0: unknown card (vendor=0x1102, dev=0x0002) at 12.0 irq 11 > pci0: unknown card (vendor=0x1102, dev=0x7002) at 12.1 > fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ata-isa0: already registered as ata0 > atkbdc0: at port 0x60-0x6f on isa0 > atkbd0: irq 1 on atkbdc0 > psm0: irq 12 on atkbdc0 > psm0: model Generic PS/2 mouse, device ID 0 > vga0: at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: on isa0 > sc0: VGA <16 virtual consoles, flags=0x200> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > lpt0: on ppbus0 > lpt0: Interrupt-driven port > ppi0: on ppbus0 > IP packet filtering initialized, divert enabled, rule-based forwarding disabled, unlimited logging > Waiting 15 seconds for SCSI devices to settle > acd0: CDROM drive at ata0 as master > acd0: 128KB buffer, PIO4 > acd0: Reads: CD-R, CD-RW, CD-DA stream, packet > acd0: Audio: play, 255 volume levels > acd0: Mechanism: ejectable tray > acd0: Medium: no/blank disc inside, unlocked > Mounting root from ufs:/dev/da0a > da2 at ahc0 bus 0 target 2 lun 0 > da2: Fixed Direct Access SCSI-2 device > da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled > da2: 2047MB (4194058 512 byte sectors: 255H 63S/T 261C) > da1 at ahc0 bus 0 target 1 lun 0 > da1: Fixed Direct Access SCSI-2 device > da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled > da1: 2047MB (4194058 512 byte sectors: 255H 63S/T 261C) > da0 at ahc0 bus 0 target 0 lun 0 > da0: Fixed Direct Access SCSI-2 device > da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled > da0: 2047MB (4194058 512 byte sectors: 255H 63S/T 261C) > da4 at ahc0 bus 0 target 6 lun 0 > da4: Removable Direct Access SCSI-2 device > da4: 10.000MB/s transfers (10.000MHz, offset 15) > da4: Attempt to query device size failed: NOT READY, Medium not present > da3 at ahc0 bus 0 target 3 lun 0 > da3: Fixed Direct Access SCSI-2 device > da3: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) > da3: 8683MB (17783204 512 byte sectors: 255H 63S/T 1106C) > pid 52635 (communicator-4.6), uid 1000: exited on signal 10 (core dumped) > > > Dan Sobral wrote: > > Chuck Robey wrote: > > > > > > Sheesh. This is a FreeBSD-questions type thing, not current. > > > > I disagree. It is obvious that something is getting locked inside the > > kernel in his setup. This *SHOULDN'T* happen, it's that simple. If his > > machine locked whenever the printer went out of paper, and *stayed* > > locked, I'd be willing to believe the problem was caused by hardware. > > That's not what was reported. What was reported is rather (better) > > explained by some kernel code waiting indefinitely for an event, while > > preventing anything else from executing. > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-current" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message