From owner-freebsd-questions Wed Feb 17 11:53:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from delta.ipmnet.ru (delta.ipmnet.ru [194.190.131.190]) by hub.freebsd.org (Postfix) with ESMTP id 235B010E72 for ; Wed, 17 Feb 1999 11:51:40 -0800 (PST) (envelope-from ilyasov@gamma.ipmnet.ru) Received: from gamma.ipmnet.ru (gamma [194.190.131.131]) by delta.ipmnet.ru (AIX4.2/UCB 8.7/8.7) with ESMTP id WAA29868 for ; Wed, 17 Feb 1999 22:51:33 +0300 (MEST) Received: (from ilyasov@localhost) by gamma.ipmnet.ru (8.9.1/8.9.1) id WAA00450 for freebsd-questions@freebsd.org; Wed, 17 Feb 1999 22:51:38 +0300 (MSK) (envelope-from ilyasov) Date: Wed, 17 Feb 1999 22:51:38 +0300 (MSK) From: "Hisam H. Ilyasov" Message-Id: <199902171951.WAA00450@gamma.ipmnet.ru> To: freebsd-questions@freebsd.org Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG When I boot my FreeBSD 3.0-RELEASE visual configuration tool reports about one of my ethernet cards (and names it ed0). Kernel works with both ethernet cards, but names it ed2 and ed3. If I configure in kernel one ethernet card, kernel names it ed1! Why such numbering occurs? I have: 1) Celeron 333 with Iwill/BX chipset motherboard 2) 2 ethernet cards Compex RL2000 3) 2 additional com ports on ISA card My interrupt map: irq device 1 console 3 com2 4 com1 5 com3 6 floppy 7 parallel port 9 com4 10 video 11 ethernet card 1 12 PS -port (mouse) 13 math (npx) 14 IDE0 controller (primary) 15 ethernet card 2 (Secondary IDE controller is disabled on the motherboard, so I can use int 15) In kernel configuration I use: device ed0 at pci? vector edintr device ed1 at pci? vector edintr my e-mail adress: ilyasov@ipmnet.ru To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message