From owner-freebsd-hardware Sat Dec 30 02:58:21 1995 Return-Path: owner-hardware Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id CAA12915 for hardware-outgoing; Sat, 30 Dec 1995 02:58:21 -0800 (PST) Received: from pcpsj.pfcs.com (harlan.clark.net [168.143.10.179]) by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id CAA12910 for ; Sat, 30 Dec 1995 02:58:11 -0800 (PST) Received: from mumps.pfcs.com (mumps.pfcs.com [192.52.69.11]) by pcpsj.pfcs.com (8.6.11/8.6.9) with SMTP id FAA18921 for ; Sat, 30 Dec 1995 05:57:02 -0500 Received: from localhost by mumps.pfcs.com with SMTP id AA03586 (5.67b/IDA-1.5 for ); Sat, 30 Dec 1995 05:57:00 -0500 To: hardware@freebsd.org Subject: Problem talking to an internal USRobotics Sportster Vi... Date: Sat, 30 Dec 1995 05:57:00 -0500 Message-Id: <3584.820321020@mumps.pfcs.com> From: Harlan Stenn Sender: owner-hardware@freebsd.org Precedence: bulk I just got a USR Sportster Vi 28.8 voice/fax modem. I configured the card for COM3 (ttyd2) and IRQ5. FreeBSD-2.1-STABLE (as of a couple of months ago) seems to find the card just fine (dmesg output is below). I've tried: cu -s {115000,57600,38400,19200,9600} -l /dev/ttyd2 without success. The "cu" just hangs and has to be killed from another window. Any suggestions on how I can get this beast to work will be appreciated. Thanks... H FreeBSD 2.1.0-950928-SNAP #0: Sun Dec 10 19:40:40 EST 1995 supfcs@brown.pfcs.com:/usr/src/sys/compile/BROWN CPU: 90-MHz Pentium 735\\90 (Pentium-class CPU) Origin = "GenuineIntel" Id = 0x524 Stepping=4 Features=0x1bf real memory = 16777216 (16384K bytes) avail memory = 14819328 (14472K bytes) Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 ed1 at 0x340-0x35f irq 10 on isa ed1: address 00:40:33:28:36:78, type NE2000 (16 bit) bpf: ed1 attached sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2 at 0x3e8-0x3ef irq 5 on isa sio2: type 16550A sio3 not found at 0x2e8 lpt0 at 0x278-0x27f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface lpt1 not found at 0xffffffff lpt2 not found at 0xffffffff fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in bt0: Bt946C/ 0-PCI/EISA/VLB(32bit) bus bt0: reading board settings, busmastering, int=11 bt0: version 4.25J, fast sync, parity, 32 mbxs, 32 ccbs bt0: targ 0 sync rate=10.00MB/s(100ns), offset=15 bt0: targ 5 sync rate= 5.00MB/s(200ns), offset=15 bt0: targ 6 sync rate= 4.00MB/s(250ns), offset=15 bt0: Using Strict Round robin scheme bt0 at 0x330 irq 11 on isa bt0 waiting for scsi devices to settle (bt0:0:0): "SEAGATE ST32550N 0014" type 0 fixed SCSI 2 sd0(bt0:0:0): Direct-Access 2047MB (4194058 512 byte sectors) (bt0:5:0): "ARCHIVE Python 28388-XXX 4.98" type 1 removable SCSI 2 st0(bt0:5:0): Sequential-Access density code 0x13, drive empty (bt0:6:0): "TOSHIBA CD-ROM XM-3501TA 3384" type 5 removable SCSI 2 cd0(bt0:6:0): CD-ROM cd present.[312922 x 2048 byte records] npx0 on motherboard npx0: INT 16 interface pas0 not found at 0x388 sb0 at 0x220 irq 7 drq 1 on isa sb0: sbxvi0 at 0x0 drq 5 on isa sbxvo0: sbmidi0 at 0x300 on isa gus0 not probed due to I/O address conflict with sb0 at 0x220 mss0 not probed due to drq conflict with sb0 at 1 opl0 at 0x388 on isa opl0: mpu0 not probed due to I/O address conflict with bt0 at 0x330 uart0 not probed due to I/O address conflict with bt0 at 0x330 Probing for devices on the PCI bus: chip0 rev 57 on pci0:0 chip1 rev 0 on pci0:1 vga0 rev 0 int a irq 9 on pci0:10 pci0:11: Bus Logic, device=0x1040, class=storage (scsi) [no driver assigned] pci0:13: CMD, device=0x640, class=storage (ide) [no driver assigned] changing root device to sd0a bpf: lo0 attached bpf: sl0 attached bpf: tun0 attached