From owner-freebsd-questions Thu Aug 8 09:32:19 1996 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id JAA19044 for questions-outgoing; Thu, 8 Aug 1996 09:32:19 -0700 (PDT) Received: from prometeo.prometeo.it (prometeo.prometeo.it [194.21.36.33]) by freefall.freebsd.org (8.7.5/8.7.3) with SMTP id JAA18999; Thu, 8 Aug 1996 09:32:10 -0700 (PDT) Received: from gioc.prometeo.it (tgioc.prometeo.it [194.21.36.34]) by prometeo.prometeo.it (8.6.12/8.6.12) with ESMTP id SAA03945; Thu, 8 Aug 1996 18:34:46 +0200 Message-Id: <199608081634.SAA03945@prometeo.prometeo.it> Reply-To: From: "COI Giovanni" To: , , Subject: Hitachi CD-ROM ATAPI problem Date: Thu, 8 Aug 1996 18:29:11 +0200 X-MSMail-Priority: Normal X-Priority: 3 X-Mailer: Microsoft Internet Mail 4.70.1132 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hello. I have to install a FreeBSD system on a PCI Pentium/133, 32 Mbyte RAM, HD 1.2 Gbyte and a Hitachi CD-ROM ATAPI. The release that I have installad is 2.1.5-stable (from mirror www.se.FreeBSD.org at August 6 1996). The problem is the CD-ROM. It is set as Master into the second IDE controller with the hard drive set as Master into the first IDE controller. When start (with a CD into the unit) the initial hardware test show: FreeBSD 2.1.5-RELEASE #0: Thu Aug 8 17:01:59 MET DST 1996 root@prometeo.it:/usr/src/sys/compile/PROM586b CPU: 133-MHz Pentium 735\\90 or 815\\100 (Pentium-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping=12 Features=0x1bf real memory = 33554432 (32768K bytes) avail memory = 30699520 (29980K bytes) Probing for devices on PCI bus 0: chip0 rev 1 on pci0:0 chip1 rev 0 on pci0:7:0 chip2 rev 0 on pci0:7:1 vga0 rev 72 int a irq 11 on pci0:9 Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <4 virtual consoles, flags=0x0> ed0 at 0x340-0x35f irq 5 on isa ed0: address 00:00:1b:3a:8f:3f, type NE2000 (16 bit) lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 1222MB (2503872 sectors), 2484 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): , removable, iordy wcd0: 689Kb/sec, 128Kb cache, audio play, 128 volume levels, ejectable tray wcd0: medium type unknown, unlocked fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in npx0 on motherboard npx0: INT 16 interface --------------------------------------------------- So it find correctly two units. (NB. If CD-ROM do not set as Master in second IDE it missing from the probe log. If it is set as Salve in first IDE the system do not boot at all. It don't find any bootable units.) When from root's shell I type: mount -t cd9660 /dev/wcd0c /mnt the system relply: cd9660: /dev/wcd0c: Device not configured Do you have any brilliant suggestions that may aid me in my search for the perfectly functional FreeBSD system? I would appreciate any comments that you could email to me. ---------------------------------------------------------- Prometeo srl - Progetti e Metodologie Informatiche Internet Services Provider Coi Giovanni Voice : +39(0)41 5701366 Via Taglio Sinistro 61/B Fax : +39(0)41 5701005 30035 MIRANO (VE) - ITALY e-mail: coi@prometeo.it http://www.prometeo.it