From owner-freebsd-current Fri Jan 24 3:55: 4 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5213937B401 for ; Fri, 24 Jan 2003 03:54:51 -0800 (PST) Received: from orc.draenor.org (orc.draenor.org [195.40.6.55]) by mx1.FreeBSD.org (Postfix) with ESMTP id 97DF043F13 for ; Fri, 24 Jan 2003 03:54:48 -0800 (PST) (envelope-from freebsd@keybaud.org) Received: by orc.draenor.org (Postfix, from userid 1333) id 09D2118092; Fri, 24 Jan 2003 11:54:41 +0000 (GMT) Date: Fri, 24 Jan 2003 11:54:41 +0000 From: Steven Haywood To: Thomas Moestl Cc: current@freebsd.org Subject: Re: kernel panic with today's CURRENT on sparc64 at boot Message-ID: <20030124115441.GB11545@keybaud.org> References: <20030121173342.GA15661@keybaud.org> <20030122195951.GA16868@crow.dom2ip.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20030122195951.GA16868@crow.dom2ip.de> User-Agent: Mutt/1.5.3i Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Jan 22, 2003 at 08:59:51PM +0100, Thomas Moestl wrote: > On Tue, 2003/01/21 at 17:33:42 +0000, freebsd@keybaud.org wrote: > > Hi > > > > cvsup'd to . today on an E220R, single CPU with two Symbios scsi cards. > > Box had been running fine with RC3, but would not boot with -CURRENT > > kernel: > > > > Current: > > > > hme4: Ethernet address: 08:00:20:b7:ef:44 > > miibus4: on hme4 > > ukphy3: on miibus4 > > ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > sym0: <875> port 0x1000-0x10ff mem 0x1090a000-0x1090afff,0x10908000-0x109080ff i > > rq 32 at device 3.0 on pci0 > > panic: trap: fast data access mmu miss > > cpuid = 0; > > Debugger("panic") > > Stopped at Debugger+0x1c: ta %xcc, 1 > > Can you please cvsup again to pick up some changes that were made > yesterday and try again? > Hi there Well, after a panic last night in IPFW on -RELEASE, I decided to try -CURRENT again. I just CVSUP'd, built kernel and rebooted. Here's what happened: FreeBSD/sparc64 bootstrap loader, Revision 1.0 (root@ns1.hurricaneseye.com, Wed Jan 22 11:31:27 GMT 2003) bootpath="/pci@1f,4000/scsi@3/disk@0,0:a" Loading /boot/defaults/loader.conf /boot/kernel/kernel data=0x2cc308+0xe4178 syms=[0x8+0x44310+0x8+0x34e6f] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... nothing to autoload yet. jumping to kernel entry at 0xc0038000. stray vector interrupt 2029 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #7: Fri Jan 24 10:36:24 GMT 2003 root@ns1.hurricaneseye.com:/usr/obj/usr/src/sys/NS Preloaded elf kernel "/boot/kernel/kernel" at 0xc042c000. Timecounter "tick" frequency 450026203 Hz cpu0: Sun Microsystems UltraSparc-II Processor (450.03 MHz CPU) Model: SUNW,Ultra-60 Initializing GEOMetry subsystem nexus0: pcib0: on nexus0 pcib0: Psycho, impl 0, version 4, ign 0x7c0 initialializing counter-timer Timecounter "counter-timer" frequency 1000000 Hz DVMA map: 0xfe000000 to 0xffffffff device 0/1/0: latency timer 0 -> 82 pcib0: ofw_pci_init: no interrupt mapping found for 0/1/0 (preset 128) device 0/1/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 0/1/1 to 33 (preset was 0) device 0/3/0: latency timer 0 -> 140 pcib0: ofw_pci_init: mapping intr for 0/3/0 to 32 (preset was 0) device 0/3/1: latency timer 0 -> 140 pcib0: ofw_pci_init: mapping intr for 0/3/1 to 38 (preset was 0) PCI-PCI bridge at 0/2/0: setting bus #s to 0/1/1 pcib0: ofw_pci_init: descending to subordinate PCI bus device 1/0/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/0/0 to 16 (preset was 0) device 1/0/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/0/1 to 17 (preset was 0) device 1/1/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/1/0 to 17 (preset was 0) device 1/1/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/1/1 to 18 (preset was 0) device 1/2/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/2/0 to 18 (preset was 0) device 1/2/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/2/1 to 19 (preset was 0) device 1/3/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/3/0 to 19 (preset was 0) device 1/3/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/3/1 to 16 (preset was 0) PCI-PCI bridge at 0/4/0: setting bus #s to 0/2/2 pcib0: ofw_pci_init: descending to subordinate PCI bus device 2/0/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 2/0/0 to 24 (preset was 0) device 2/0/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 2/0/1 to 25 (preset was 0) device 2/1/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 2/1/0 to 25 (preset was 0) device 2/1/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 2/1/1 to 26 (preset was 0) device 2/2/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 2/2/0 to 26 (preset was 0) device 2/2/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 2/2/1 to 27 (preset was 0) device 2/3/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 2/3/0 to 27 (preset was 0) device 2/3/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 2/3/1 to 24 (preset was 0) device 0/5/0: latency timer 0 -> 1584 pcib0: ofw_pci_init: mapping intr for 0/5/0 to 28 (preset was 0) pci0: on pcib0 ebus0: revision 0x01 ebus0: mem 0x71000000-0x717fffff,0x70000000-0x70ffffff at dev ice 1.0 on pci0 ebus0: addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072 a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached) ebus0: addr 0x1400724000-0x1400724003 (no driver attached) ebus0: addr 0x1400504000-0x1400504002 (no driver attached) ebus0: addr 0x1400500000-0x1400500007 (no driver attached) ebus0: addr 0x1400400000-0x140040007f irq 43 (no driver attached) ebus0: addr 0x14003083f8-0x14003083ff irq 41 (no driver attached) ebus0: addr 0x14003062f8-0x14003062ff irq 42 (no driver attached) ebus0: addr 0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x1400304 3bc-0x14003043cb irq 34 (no driver attached) ebus0: addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x1400 3023f0-0x14003023f7 irq 39 (no driver attached) eeprom0: addr 0x1400000000-0x1400001fff on ebus0 eeprom0: model mk48t59 eeprom0: hostid 80b7ef44 ebus0: addr 0x1000000000-0x10000fffff (no driver attached) hme0: mem 0x10900000-0x10907fff irq 33 at device 1.1 o n pci0 hme0: Ethernet address: 08:00:20:b7:ef:44 miibus0: on hme0 qsphy0: on miibus0 qsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib1: at device 2.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) hme1: mem 0x2800000-0x2807fff irq 17 at device 0.1 on pci1 hme1: Ethernet address: 08:00:20:b7:ef:44 miibus1: on hme1 ukphy0: on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci1: at device 1.0 (no driver attached) hme2: mem 0x4800000-0x4807fff irq 18 at device 1.1 on pci1 hme2: Ethernet address: 08:00:20:b7:ef:44 miibus2: on hme2 ukphy1: on miibus2 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci1: at device 2.0 (no driver attached) hme3: mem 0x6800000-0x6807fff irq 19 at device 2.1 on pci1 hme3: Ethernet address: 08:00:20:b7:ef:44 miibus3: on hme3 ukphy2: on miibus3 ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci1: at device 3.0 (no driver attached) hme4: mem 0x8800000-0x8807fff irq 16 at device 3.1 on pci1 hme4: Ethernet address: 08:00:20:b7:ef:44 miibus4: on hme4 ukphy3: on miibus4 ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sym0: <875> port 0x1000-0x10ff mem 0x1090a000-0x1090afff,0x10908000-0x109080ff i rq 32 at device 3.0 on pci0 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: <875> port 0x1400-0x14ff mem 0x1090e000-0x1090efff,0x1090c000-0x1090c0ff i rq 38 at device 3.1 on pci0 sym1: No NVRAM, ID 7, Fast-20, SE, parity checking pcib2: at device 4.0 on pci0 pci2: on pcib2 pci2: at device 0.0 (no driver attached) hme5: mem 0xa800000-0xa807fff irq 25 at device 0.1 on pci2 hme5: Ethernet address: 08:00:20:b7:ef:44 miibus5: on hme5 ukphy4: on miibus5 ukphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci2: at device 1.0 (no driver attached) hme6: mem 0xc800000-0xc807fff irq 26 at device 1.1 on pci2 hme6: DMA buffer map load error 12 hme6: could not be configured device_probe_and_attach: hme6 attach returned 6 pci2: at device 2.0 (no driver attached) hme6: mem 0xe800000-0xe807fff irq 27 at device 2.1 on pci2 hme6: DMA buffer map load error 12 hme6: could not be configured device_probe_and_attach: hme6 attach returned 6 pci2: at device 3.0 (no driver attached) pci2: at device 3.0 (no driver attached) n pci2 hme6: DMA buffer map load error 12 hme6: could not be configured device_probe_and_attach: hme6 attach returned 6 pci0: at device 5.0 (no driver attached) pcib3: on nexus0 pcib3: Psycho, impl 0, version 4, ign 0x7c0 pci3: on pcib3 Timecounters tick every 10.000 msec ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to de ny, logging limited to 100 packets/entry by default Waiting 5 seconds for SCSI devices to settle da0 at sym0 bus 0 target 1 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da0: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) Mounting root from ufs:/dev/da0a exec /sbin/init: error 8 init: not found in path /sbin/init:/sbin/oinit:/sbin/init.bak:/stand/sysinstall panic: no init cpuid = 0; Debugger("panic") Stopped at Debugger+0x1c: ta %xcc, 1 RELEASE looks like this: OK boot kernel.old /boot/kernel.old/kernel data=0x2cb808+0xe4778 syms=[0x8+0x44118+0x8+0x349e9] nothing to autoload yet. jumping to kernel entry at 0xc0038000. stray vector interrupt 2029 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-RELEASE #6: Wed Jan 22 15:55:57 GMT 2003 root@ns1.hurricaneseye.com:/usr/obj/usr/src/sys/NS Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc042c000. Timecounter "tick" frequency 450024890 Hz cpu0: Sun Microsystems UltraSparc-II Processor (450.02 MHz CPU) Model: SUNW,Ultra-60 Initializing GEOMetry subsystem nexus0: pcib0: on nexus0 pcib0: Psycho, impl 0, version 4, ign 7c0 initialializing counter-timer Timecounter "counter-timer" frequency 1000000 Hz DVMA map: 0xfe000000 to 0xffffffff device 0/1/0: latency timer 0 -> 82 pcib0: ofw_pci_init: no interrupt mapping found for 0/1/0 (preset 128) device 0/1/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 0/1/1 to 33 (preset was 0) device 0/3/0: latency timer 0 -> 140 pcib0: ofw_pci_init: mapping intr for 0/3/0 to 32 (preset was 0) device 0/3/1: latency timer 0 -> 140 pcib0: ofw_pci_init: mapping intr for 0/3/1 to 38 (preset was 0) PCI-PCI bridge at 0/2/0: setting bus #s to 0/1/1 pcib0: ofw_pci_init: descending to subordinate PCI bus device 1/0/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/0/0 to 16 (preset was 0) device 1/0/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/0/1 to 17 (preset was 0) device 1/1/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/1/0 to 17 (preset was 0) device 1/1/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/1/1 to 18 (preset was 0) device 1/2/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/2/0 to 18 (preset was 0) device 1/2/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/2/1 to 19 (preset was 0) device 1/3/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/3/0 to 19 (preset was 0) device 1/3/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/3/1 to 16 (preset was 0) PCI-PCI bridge at 0/4/0: setting bus #s to 0/2/2 pcib0: ofw_pci_init: descending to subordinate PCI bus device 2/0/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 2/0/0 to 24 (preset was 0) device 2/0/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 2/0/1 to 25 (preset was 0) device 2/1/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 2/1/0 to 25 (preset was 0) device 2/1/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 2/1/1 to 26 (preset was 0) device 2/2/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 2/2/0 to 26 (preset was 0) device 2/2/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 2/2/1 to 27 (preset was 0) device 2/3/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 2/3/0 to 27 (preset was 0) device 2/3/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 2/3/1 to 24 (preset was 0) device 0/5/0: latency timer 0 -> 1584 pcib0: ofw_pci_init: mapping intr for 0/5/0 to 28 (preset was 0) pci0: on pcib0 ebus0: revision 0x01 ebus0: mem 0x71000000-0x717fffff,0x70000000-0x70ffffff at dev ice 1.0 on pci0 ebus0: addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072 a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached) ebus0: addr 0x1400724000-0x1400724003 (no driver attached) ebus0: addr 0x1400504000-0x1400504002 (no driver attached) ebus0: addr 0x1400500000-0x1400500007 (no driver attached) ebus0: addr 0x1400400000-0x140040007f irq 43 (no driver attached) ebus0: addr 0x14003083f8-0x14003083ff irq 41 (no driver attached) ebus0: addr 0x14003062f8-0x14003062ff irq 42 (no driver attached) ebus0: addr 0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x1400304 3bc-0x14003043cb irq 34 (no driver attached) ebus0: addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x1400 3023f0-0x14003023f7 irq 39 (no driver attached) eeprom0: addr 0x1400000000-0x1400001fff on ebus0 eeprom0: model mk48t59 eeprom0: hostid 80b7ef44 ebus0: addr 0x1000000000-0x10000fffff (no driver attached) hme0: mem 0x10900000-0x10907fff irq 33 at device 1.1 o n pci0 hme0: Ethernet address: 08:00:20:b7:ef:44 miibus0: on hme0 qsphy0: on miibus0 qsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib1: at device 2.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) hme1: mem 0x2800000-0x2807fff irq 17 at device 0.1 on pci1 hme1: Ethernet address: 08:00:20:b7:ef:44 miibus1: on hme1 ukphy0: on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci1: at device 1.0 (no driver attached) hme2: mem 0x4800000-0x4807fff irq 18 at device 1.1 on pci1 hme2: Ethernet address: 08:00:20:b7:ef:44 miibus2: on hme2 ukphy1: on miibus2 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci1: at device 2.0 (no driver attached) hme3: mem 0x6800000-0x6807fff irq 19 at device 2.1 on pci1 hme3: Ethernet address: 08:00:20:b7:ef:44 miibus3: on hme3 ukphy2: on miibus3 ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci1: at device 3.0 (no driver attached) hme4: mem 0x8800000-0x8807fff irq 16 at device 3.1 on pci1 hme4: Ethernet address: 08:00:20:b7:ef:44 miibus4: on hme4 ukphy3: on miibus4 ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sym0: <875> port 0x1000-0x10ff mem 0x1090a000-0x1090afff,0x10908000-0x109080ff i rq 32 at device 3.0 on pci0 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: <875> port 0x1400-0x14ff mem 0x1090e000-0x1090efff,0x1090c000-0x1090c0ff i rq 38 at device 3.1 on pci0 sym1: No NVRAM, ID 7, Fast-20, SE, parity checking pcib2: at device 4.0 on pci0 pci2: on pcib2 pci2: at device 0.0 (no driver attached) hme5: mem 0xa800000-0xa807fff irq 25 at device 0.1 on pci2 hme5: Ethernet address: 08:00:20:b7:ef:44 miibus5: on hme5 ukphy4: on miibus5 ukphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci2: at device 1.0 (no driver attached) hme6: mem 0xc800000-0xc807fff irq 26 at device 1.1 on pci2 hme6: Ethernet address: 08:00:20:b7:ef:44 miibus6: on hme6 ukphy5: on miibus6 ukphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci2: at device 2.0 (no driver attached) hme7: mem 0xe800000-0xe807fff irq 27 at device 2.1 on pci2 hme7: Ethernet address: 08:00:20:b7:ef:44 miibus7: on hme7 ukphy6: on miibus7 ukphy6: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci2: at device 3.0 (no driver attached) hme8: mem 0x10800000-0x10807fff irq 24 at device 3.1 o n pci2 hme8: Ethernet address: 08:00:20:b7:ef:44 miibus8: on hme8 ukphy7: on miibus8 ukphy7: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: at device 5.0 (no driver attached) pcib3: on nexus0 pcib3: Psycho, impl 0, version 4, ign 7c0 pci3: on pcib3 Timecounters tick every 10.000 msec ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to de ny, logging limited to 100 packets/entry by default Waiting 5 seconds for SCSI devices to settle cd0 at sym0 bus 0 target 6 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 16) cd0: cd present [420504 x 512 byte records] da1 at sym0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da1: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da0 at sym0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da0: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C) Mounting root from ufs:/dev/da0a hw.bus.devctl_disable: 0 -> 1 Loading configuration files. Entropy harvesting: interrupts ethernet point_to_point. swapon: adding /dev/da0b as swap device Starting file system checks: /dev/da0a: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da0a: clean, 158093 free (373 frags, 19715 blocks, 0.2% fragmentation) /dev/da0e: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da0e: clean, 199275 free (107 frags, 24896 blocks, 0.1% fragmentation) /dev/da0f: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da0f: clean, 6784448 free (24928 frags, 844940 blocks, 0.3% fragmentation) /dev/da0d: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da0d: clean, 513279 free (95 frags, 64148 blocks, 0.0% fragmentation) security.bsd.see_other_uids: 1 -> 0 net.inet.tcp.blackhole: 0 -> 2 net.inet.udp.blackhole: 0 -> 1 net.inet.ip.rtexpire: 3600 -> 600 Doing initial network setup: hostname. So it looks like it doesn't initialize SCSI stuff properly. as well as some DMA problems with the 2nd QFE card. For the record, I recompiled with the SCSI delay set to 15000, it made no difference Cheers Steven To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message