From owner-freebsd-current@FreeBSD.ORG Fri Apr 8 05:15:13 2005 Return-Path: Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C6A0016A4CE for ; Fri, 8 Apr 2005 05:15:13 +0000 (GMT) Received: from carver.gumbysoft.com (carver.gumbysoft.com [66.220.23.50]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3657E43D48 for ; Fri, 8 Apr 2005 05:15:13 +0000 (GMT) (envelope-from dwhite@gumbysoft.com) Received: by carver.gumbysoft.com (Postfix, from userid 1000) id 2F2A072DDD; Thu, 7 Apr 2005 22:15:13 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by carver.gumbysoft.com (Postfix) with ESMTP id 2BAB472DD9; Thu, 7 Apr 2005 22:15:13 -0700 (PDT) Date: Thu, 7 Apr 2005 22:15:13 -0700 (PDT) From: Doug White To: Divacky Roman In-Reply-To: <20050406130909.GA90294@stud.fit.vutbr.cz> Message-ID: <20050407221434.J57391@carver.gumbysoft.com> References: <20050406130909.GA90294@stud.fit.vutbr.cz> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII cc: current@freebsd.org Subject: Re: slow kbd input on 6-current on amd64@nforce3 X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 08 Apr 2005 05:15:14 -0000 On Wed, 6 Apr 2005, Divacky Roman wrote: > as I have mentioned on the list I have very slow keyboard input. it might be > related to kbd not having an IRQ assigned. I repeat once again that it worked > on 5.3R. Your machine would not be PC-compliant if your keyboard controller did not get an interrupt. In this output, it does. Perhaps something else is tying up CPU? Or the CPU speed is defaulting to a very low speed? Try loading the cpufreq driver. > > I include verbose dmesg + this piece which didnt get into dmesg (dont know why): > > (with atkbd.flags=0) > atkbd: the current kbd controller command byte 0047 > atkbd: keyboard ID 0x41ab (2) > kbdc: RESET_KBD return code:00fa > kbdc: RESET_KBD status:00aa > sc0: at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > atkbdc0: at port 0x60,0x64 on isa0 > atkbd0: irq 1 on atkbdc0 > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 > atkbd0: [GIANT-LOCKED] > psm0: current command byte:0047 > kbdc: TEST_AUX_PORT status:0000 > kbdc: RESET_AUX return code:00fe > kbdc: RESET_AUX return code:00fe > kbdc: RESET_AUX return code:00fe > kbdc: DIAGNOSE status:0055 > kbdc: TEST_KBD_PORT status:0000 > psm0: failed to reset the aux device. > fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 > > dmesg itself: > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 6.0-CURRENT #8: Wed Apr 6 10:31:12 UTC 2005 > root@sprava:/usr/obj/usr/src/sys/MYKERNEL > Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80538000. > Calibrating clock(s) ... i8254 clock: 1193231 Hz > CLK_USE_I8254_CALIBRATION not specified - using default frequency > Timecounter "i8254" frequency 1193182 Hz quality 0 > Calibrating TSC clock ... TSC clock: 1808810761 Hz > CPU: AMD Athlon(tm) 64 Processor 3000+ (1808.81-MHz K8-class CPU) > Origin = "AuthenticAMD" Id = 0x10ff0 Stepping = 0 > Features=0x78bfbff > AMD Features=0xe2500800,LM,3DNow+,3DNow> > L1 2MB data TLB: 8 entries, fully associative > L1 2MB instruction TLB: 8 entries, fully associative > L1 4KB data TLB: 32 entries, fully associative > L1 4KB instruction TLB: 32 entries, fully associative > L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative > L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative > L2 2MB unified TLB: 0 entries, disabled/not present > L2 4KB data TLB: 512 entries, 4-way associative > L2 4KB instruction TLB: 512 entries, 4-way associative > L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative > real memory = 268369920 (255 MB) > Physical memory chunk(s): > 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) > 0x0000000000635000 - 0x000000000f837fff, 253767680 bytes (61955 pages) > avail memory = 252043264 (240 MB) > mem: > null: > random: > io: > cpu0 on motherboard > pci_open(1): mode 1 addr port (0x0cf8) is 0x80004804 > pci_open(1a): mode1res=0x80000000 (0x80000000) > pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00e110de) > pcib0: pcibus 0 on motherboard > pci0: on pcib0 > pci0: physical bus=0 > map[10]: type 3, range 32, base f0000000, size 27, enabled > found-> vendor=0x10de, dev=0x00e1, revid=0xa1 > bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x00e0, revid=0xa2 > bus=0, slot=1, func=0 > class=06-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[10]: type 4, range 32, base 0000e800, size 5, enabled > map[20]: type 4, range 32, base 00004c00, size 6, enabled > map[24]: type 4, range 32, base 00004c40, size 6, enabled > found-> vendor=0x10de, dev=0x00e4, revid=0xa1 > bus=0, slot=1, func=1 > class=0c-05-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) > intpin=a, irq=3 > powerspec 2 supports D0 D3 current D0 > map[10]: type 1, range 32, base fc003000, size 12, enabled > found-> vendor=0x10de, dev=0x00e7, revid=0xa1 > bus=0, slot=2, func=0 > class=0c-03-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) > intpin=a, irq=3 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type 1, range 32, base fc004000, size 12, enabled > found-> vendor=0x10de, dev=0x00e7, revid=0xa1 > bus=0, slot=2, func=1 > class=0c-03-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) > intpin=b, irq=3 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type 1, range 32, base fc005000, size 8, enabled > found-> vendor=0x10de, dev=0x00e8, revid=0xa2 > bus=0, slot=2, func=2 > class=0c-03-20, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) > intpin=c, irq=3 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type 1, range 32, base fc000000, size 12, enabled > map[14]: type 4, range 32, base 0000a400, size 3, enabled > found-> vendor=0x10de, dev=0x00df, revid=0xa2 > bus=0, slot=5, func=0 > class=06-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns) > intpin=a, irq=3 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type 4, range 32, base 0000a800, size 8, enabled > map[14]: type 4, range 32, base 0000ac00, size 7, enabled > map[18]: type 1, range 32, base fc001000, size 12, enabled > found-> vendor=0x10de, dev=0x00ea, revid=0xa1 > bus=0, slot=6, func=0 > class=04-01-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[20]: type 4, range 32, base 0000f000, size 4, enabled > found-> vendor=0x10de, dev=0x00e5, revid=0xa2 > bus=0, slot=8, func=0 > class=01-01-8a, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) > powerspec 2 supports D0 D3 current D0 > map[10]: type 4, range 32, base 000009e0, size 3, enabled > map[14]: type 4, range 32, base 00000be0, size 2, enabled > map[18]: type 4, range 32, base 00000960, size 3, enabled > map[1c]: type 4, range 32, base 00000b60, size 2, enabled > map[20]: type 4, range 32, base 0000c800, size 4, enabled > found-> vendor=0x10de, dev=0x00ee, revid=0xa2 > bus=0, slot=9, func=0 > class=01-01-85, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D3 current D0 > map[10]: type 4, range 32, base 000009f0, size 3, enabled > map[14]: type 4, range 32, base 00000bf0, size 2, enabled > map[18]: type 4, range 32, base 00000970, size 3, enabled > map[1c]: type 4, range 32, base 00000b70, size 2, enabled > map[20]: type 4, range 32, base 0000e000, size 4, enabled > found-> vendor=0x10de, dev=0x00e3, revid=0xa2 > bus=0, slot=10, func=0 > class=01-01-85, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > found-> vendor=0x10de, dev=0x00e2, revid=0xa2 > bus=0, slot=11, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords) > lattimer=0x10 (480 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x00ed, revid=0xa2 > bus=0, slot=14, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x02 (500 ns) > found-> vendor=0x1022, dev=0x1100, revid=0x00 > bus=0, slot=24, func=0 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1101, revid=0x00 > bus=0, slot=24, func=1 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1102, revid=0x00 > bus=0, slot=24, func=2 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1103, revid=0x00 > bus=0, slot=24, func=3 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > isab0: at device 1.0 on pci0 > isa0: on isab0 > pci0: at device 1.1 (no driver attached) > pci0:1:1: Transition from D0 to D3 > pci0: at device 2.0 (no driver attached) > pci0:2:0: Transition from D0 to D3 > pci0: at device 2.1 (no driver attached) > pci0:2:1: Transition from D0 to D3 > pci0: at device 2.2 (no driver attached) > pci0:2:2: Transition from D0 to D3 > pci0: at device 5.0 (no driver attached) > pci0:5:0: Transition from D0 to D3 > pci0: at device 6.0 (no driver attached) > pci0:6:0: Transition from D0 to D3 > atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on pci0 > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000 > ata0: on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 > atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 > ata0: reset tp1 mask=03 ostat0=7f ostat1=50 > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb > ata0: reset tp2 stat0=ff stat1=10 devices=0x8 > ata0: [MPSAFE] > ata1: on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 > atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 > ata1: reset tp1 mask=03 ostat0=60 ostat1=70 > ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 > ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 > ata1: reset tp2 stat0=20 stat1=30 devices=0x0 > ata1: [MPSAFE] > atapci1: port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc800-0xc80f irq 11 at device 9.0 on pci0 > atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc800 > atapci1: [MPSAFE] > ata2: on atapci1 > atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9e0 > atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbe0 > ata2: reset tp1 mask=03 ostat0=50 ostat1=00 > ata2: stat0=0xd0 err=0x00 lsb=0x86 msb=0x78 > ata2: stat0=0xd0 err=0x00 lsb=0x86 msb=0x78 > ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 > ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 > ata2: reset tp2 stat0=50 stat1=00 devices=0x1 > ata2: [MPSAFE] > ata3: on atapci1 > atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x960 > atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb60 > ata3: reset tp1 mask=03 ostat0=7f ostat1=7f > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff > ata3: reset tp2 stat0=ff stat1=ff devices=0x0 > ata3: [MPSAFE] > atapci2: port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f irq 10 at device 10.0 on pci0 > atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000 > atapci2: [MPSAFE] > ata4: on atapci2 > atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9f0 > atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbf0 > ata4: reset tp1 mask=03 ostat0=7f ostat1=7f > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata4: stat1=0x7f err=0xff lsb=0xff msb=0xff > ata4: reset tp2 stat0=ff stat1=ff devices=0x0 > ata4: [MPSAFE] > ata5: on atapci2 > atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x970 > atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb70 > ata5: reset tp1 mask=03 ostat0=7f ostat1=7f > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff > ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff > ata5: reset tp2 stat0=ff stat1=ff devices=0x0 > ata5: [MPSAFE] > pcib1: at device 11.0 on pci0 > pcib1: secondary bus 1 > pcib1: subordinate bus 1 > pcib1: I/O decode 0x8000-0x8fff > pcib1: memory decode 0xf8000000-0xf9ffffff > pcib1: prefetched decode 0xe0000000-0xefffffff > pci1: on pcib1 > pci1: physical bus=1 > map[10]: type 3, range 32, base e0000000, size 28, enabled > pcib1: (null) requested memory range 0xe0000000-0xefffffff: good > map[14]: type 4, range 32, base 00008000, size 8, enabled > pcib1: (null) requested I/O range 0x8000-0x80ff: in range > map[18]: type 1, range 32, base f9000000, size 16, enabled > pcib1: (null) requested memory range 0xf9000000-0xf900ffff: good > found-> vendor=0x1002, dev=0x5157, revid=0x00 > bus=1, slot=0, func=0 > class=03-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D1 D2 D3 current D0 > pci1: at device 0.0 (no driver attached) > pcib2: at device 14.0 on pci0 > pcib2: secondary bus 2 > pcib2: subordinate bus 2 > pcib2: I/O decode 0x9000-0x9fff > pcib2: memory decode 0xfa000000-0xfbffffff > pcib2: prefetched decode 0xfff00000-0xfffff > pci2: on pcib2 > pci2: physical bus=2 > map[10]: type 1, range 32, base fb001000, size 11, enabled > pcib2: (null) requested memory range 0xfb001000-0xfb0017ff: good > map[14]: type 4, range 32, base 00009000, size 7, enabled > pcib2: (null) requested I/O range 0x9000-0x907f: in range > found-> vendor=0x1106, dev=0x3044, revid=0x46 > bus=2, slot=12, func=0 > class=0c-00-10, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=5 > powerspec 2 supports D0 D2 D3 current D0 > map[10]: type 4, range 32, base 00009400, size 8, enabled > pcib2: (null) requested I/O range 0x9400-0x94ff: in range > map[14]: type 1, range 32, base fb000000, size 8, enabled > pcib2: (null) requested memory range 0xfb000000-0xfb0000ff: good > found-> vendor=0x10ec, dev=0x8169, revid=0x10 > bus=2, slot=13, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) > intpin=a, irq=5 > powerspec 2 supports D0 D1 D2 D3 current D0 > pci2: at device 12.0 (no driver attached) > pci2:12:0: Transition from D0 to D3 > re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x9400 > pcib2: re0 requested I/O range 0x9400-0x94ff: in range > pcib2: re0 requested I/O range 0x9400-0x94ff: in range > pcib2: re0 requested I/O range 0x9400-0x94ff: in range > re0: port 0x9400-0x94ff mem 0xfb000000-0xfb0000ff irq 5 at device 13.0 on pci2 > pcib2: re0 requested I/O range 0x9400-0x94ff: in range > miibus0: on re0 > rgephy0: on miibus0 > rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto > re0: bpf attached > re0: Ethernet address: 00:11:09:d9:b6:61 > re0: [MPSAFE] > pnp_identify: Trying Read_Port at 203 > pnp_identify: Trying Read_Port at 243 > pnp_identify: Trying Read_Port at 283 > pnp_identify: Trying Read_Port at 2c3 > pnp_identify: Trying Read_Port at 303 > pnp_identify: Trying Read_Port at 343 > pnp_identify: Trying Read_Port at 383 > pnp_identify: Trying Read_Port at 3c3 > PNP Identify complete > sc: sc0 already exists; skipping it > vga: vga0 already exists; skipping it > isa_probe_children: disabling PnP devices > isa_probe_children: probing non-PnP devices > orm0: at iomem 0xc0000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd17ff,0xd2000-0xd2fff on isa0 > atkbd: the current kbd controller command byte 0047 > atkbd: keyboard ID 0x41ab (2) > sc0: at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > atkbdc0: at port 0x60,0x64 on isa0 > atkbd0: flags 0x1 irq 1 on atkbdc0 > kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 > atkbd0: [GIANT-LOCKED] > psm0: current command byte:0047 > psm0: failed to reset the aux device. > fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 > ppc0 failed to probe at irq 7 on isa0 > sio0: irq maps: 0x1 0x11 0x1 0x1 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: irq maps: 0x1 0x1 0x1 0x1 > sio1: probe failed test(s): 0 1 2 4 6 7 9 > sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 > sio2: not probed (disabled) > sio3: not probed (disabled) > isa_probe_children: probing PnP devices > Device configuration finished. > Timecounter "TSC" frequency 1808810761 Hz quality 800 > Timecounters tick every 1.000 msec > lo0: bpf attached > ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire > acd0: setting PIO4 on nVidia nForce3 Pro chip > acd0: setting UDMA33 on nVidia nForce3 Pro chip > acd0: CDROM drive at ata0 as slave > acd0: 128KB buffer, UDMA33 > acd0: Reads: CDR, CDRW, CDDA stream, packet > acd0: Writes: > acd0: Audio: play, 255 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: no/blank disc > ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire > ad4: 76319MB at ata2-master SATA150 > ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue > GEOM: new disk ad4 > Trying to mount root from ufs:/dev/ad4s2a > start_init: trying /sbin/init > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" > -- Doug White | FreeBSD: The Power to Serve dwhite@gumbysoft.com | www.FreeBSD.org