From owner-freebsd-hackers@FreeBSD.ORG Wed Oct 5 08:10:17 2005 Return-Path: X-Original-To: freebsd-hackers@FreeBSD.org Delivered-To: freebsd-hackers@FreeBSD.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7426C16A41F; Wed, 5 Oct 2005 08:10:17 +0000 (GMT) (envelope-from rwatson@FreeBSD.org) Received: from cyrus.watson.org (cyrus.watson.org [204.156.12.53]) by mx1.FreeBSD.org (Postfix) with ESMTP id 61A0043D67; Wed, 5 Oct 2005 08:10:13 +0000 (GMT) (envelope-from rwatson@FreeBSD.org) Received: from fledge.watson.org (fledge.watson.org [204.156.12.50]) by cyrus.watson.org (Postfix) with ESMTP id DAC5746B11; Wed, 5 Oct 2005 04:10:12 -0400 (EDT) Date: Wed, 5 Oct 2005 09:10:12 +0100 (BST) From: Robert Watson X-X-Sender: robert@fledge.watson.org To: Koen Martens In-Reply-To: <433FF87C.3090101@metro.cx> Message-ID: <20051005090715.D84936@fledge.watson.org> References: <2B3B2AA816369A4E87D7BE63EC9D2F269B7B4D@SDCEXCHANGE01.ad.amcc.com> <432F1310.80007@metro.cx> <20050920153806.F34322@fledge.watson.org> <433FF87C.3090101@metro.cx> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Cc: freebsd-hackers@FreeBSD.org, Dimitry Andric , Vinod Kashyap , jhb@FreeBSD.org Subject: Re: panic in propagate_priority w/ postgresql under heavy load X-BeenThere: freebsd-hackers@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Technical Discussions relating to FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 05 Oct 2005 08:10:17 -0000 On Sun, 2 Oct 2005, Koen Martens wrote: > kernel trap 12 with interrupts disabled > > > Fatal trap 12: page fault while in kernel mode > cpuid = 1; apic id = 06 > fault virtual address = 0x24 > fault code = supervisor read, page not present > instruction pointer = 0x8:0xc051c253 > stack pointer = 0x10:0xe93efb3c > frame pointer = 0x10:0xe93efb50 > code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, def32 1, gran 1 > processor eflags = resume, IOPL = 0 > current process = 6092 (postgres) > > And that, that is all.. No ddb> no 'dumping xxxxMB', just that. So > basically, i fear this is a non-debugable problem, since putting in > witness and such slows the kernel to a point where the panic does not > occur anymore (at least, not in the 4 weeks i've been running the box > with witness & invariants). Clueless :) This looks like a NULL pointer dereference in kernel code. Probably, this is not a locking problem, so running without WITNESS to debug this should be OK. Are you using a serial console? If not, you might find that it increases the reliability of entering DDB. If this box is an SMP box, you may also want to add options KDB_STOP_NMI to your kernel config. Using gdb, could you work out what function 0xc051c253 is, and where in the function. You should be able to run gdb on your kernel.debug (or kernel on 7.x), and use "l *0xc051c253" to generate a pointer to the line and snippet, which will give us a substantial hint about what is happening. Robert N M Watson > > Best, > > Koen > > > ================[ full kernel config: > > # > # GENERIC -- Generic kernel configuration file for FreeBSD/i386 > # > # For more information on this file, please read the handbook section on > # Kernel Configuration Files: > # > # > http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html > # > # The handbook is also available locally in /usr/share/doc/handbook > # if you've installed the doc distribution, otherwise always see the > # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the > # latest information. > # > # An exhaustive list of options and more detailed explanations of the > # device lines is also present in the ../../conf/NOTES and NOTES files. > # If you are in doubt as to the purpose or necessity of a line, > check first > # in NOTES. > # > # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.413.2.13 2005/04/02 > 16:37:58 scottl Exp $ > > machine i386 > cpu I486_CPU > cpu I586_CPU > cpu I686_CPU > ident YIN-YANG > > # debug > #options WITNESS > #options INVARIANTS > #options INVARIANT_SUPPORT > options KDB > options DDB > # > options KDB_TRACE > # > makeoptions DEBUG=-g > # debug > > > # To statically compile in device wiring instead of /boot/device.hints > #hints "GENERIC.hints" # Default places to look for devices. > > options SCHED_4BSD # 4BSD scheduler > options INET # InterNETworking > options INET6 # IPv6 communications protocols > options FFS # Berkeley Fast Filesystem > options SOFTUPDATES # Enable FFS soft updates support > options UFS_ACL # Support for access control lists > options UFS_DIRHASH # Improve performance on big directories > options MD_ROOT # MD is a potential root device > options NFSCLIENT # Network Filesystem Client > options NFSSERVER # Network Filesystem Server > options NFS_ROOT # NFS usable as /, requires NFSCLIENT > options MSDOSFS # MSDOS Filesystem > options CD9660 # ISO 9660 Filesystem > options PROCFS # Process filesystem (requires PSEUDOFS) > options PSEUDOFS # Pseudo-filesystem framework > options GEOM_GPT # GUID Partition Tables. > options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] > options COMPAT_FREEBSD4 # Compatible with FreeBSD4 > options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI > options KTRACE # ktrace(1) support > options SYSVSHM # SYSV-style shared memory > options SYSVMSG # SYSV-style message queues > options SYSVSEM # SYSV-style semaphores > options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time > extensions > options KBD_INSTALL_CDEV # install a CDEV entry in /dev > options AHC_REG_PRETTY_PRINT # Print register bitfields in debug > # output. Adds ~128k to driver. > options AHD_REG_PRETTY_PRINT # Print register bitfields in debug > # output. Adds ~215k to driver. > options ADAPTIVE_GIANT # Giant mutex is adaptive. > > > options IPFILTER > options IPFILTER_LOG > options IPFILTER_DEFAULT_BLOCK > > options IPFILTER > options IPFILTER_LOG > > options IPFIREWALL #firewall > options IPFIREWALL_VERBOSE #enable logging to syslogd(8) > options IPFIREWALL_FORWARD #enable transparent proxy > support > options IPFIREWALL_VERBOSE_LIMIT=10 #limit verbosity > options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by > default > options IPV6FIREWALL #firewall for IPv6 > options IPV6FIREWALL_VERBOSE > options IPV6FIREWALL_VERBOSE_LIMIT=10 > options IPV6FIREWALL_DEFAULT_TO_ACCEPT > > options SHMMAXPGS=262144 > options SHMSEG=512 > options SHMMNI=512 > options SEMMNI=512 > options SEMMNS=1024 > options SEMMNU=512 > options SEMMAP=512 > options NMBCLUSTERS=32768 > > device apic # I/O APIC > > options SMP # Symmetric MultiProcessor > Kernel > > # Bus support. Do not remove isa, even if you have no isa slots > device isa > device eisa > device pci > > # Floppy drives > device fdc > > # ATA and ATAPI devices > device ata > device atadisk # ATA disk drives > device ataraid # ATA RAID drives > device atapicd # ATAPI CDROM drives > #device atapifd # ATAPI floppy drives > #device atapist # ATAPI tape drives > options ATA_STATIC_ID # Static device numbering > > # SCSI Controllers > #device ahb # EISA AHA1742 family > #device ahc # AHA2940 and onboard AIC7xxx devices > #device ahd # AHA39320/29320 and onboard AIC79xx devices > #device amd # AMD 53C974 (Tekram DC-390(T)) > #device isp # Qlogic family > #device mpt # LSI-Logic MPT-Fusion > ##device ncr # NCR/Symbios Logic > #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') > #device trm # Tekram DC395U/UW/F DC315U adapters > > #device adv # Advansys SCSI adapters > #device adw # Advansys wide SCSI adapters > #device aha # Adaptec 154x SCSI adapters > #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. > #device bt # Buslogic/Mylex MultiMaster SCSI adapters > > #device ncv # NCR 53C500 > #device nsp # Workbit Ninja SCSI-3 > #device stg # TMC 18C30/18C50 > > # SCSI peripherals > device scbus # SCSI bus (required for SCSI) > device ch # SCSI media changers > device da # Direct Access (disks) > device sa # Sequential Access (tape etc) > device cd # CD > device pass # Passthrough device (direct SCSI access) > device ses # SCSI Environmental Services (and SAF-TE) > > # RAID controllers interfaced to the SCSI subsystem > #device amr # AMI MegaRAID > #device arcmsr # Areca SATA II RAID > #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID > #device ciss # Compaq Smart RAID 5* > #device dpt # DPT Smartcache III, IV - See NOTES for options > #device hptmv # Highpoint RocketRAID 182x > #device iir # Intel Integrated RAID > #device ips # IBM (Adaptec) ServeRAID > #device mly # Mylex AcceleRAID/eXtremeRAID > device twa # 3ware 9000 series PATA/SATA RAID > > # RAID controllers > #device aac # Adaptec FSA RAID > #device aacp # SCSI passthrough for aac (requires CAM) > #device ida # Compaq Smart RAID > #device mlx # Mylex DAC960 family > #device pst # Promise Supertrak SX6000 > device twe # 3ware ATA RAID > > # atkbdc0 controls both the keyboard and the PS/2 mouse > device atkbdc # AT keyboard controller > device atkbd # AT keyboard > device psm # PS/2 mouse > > device vga # VGA video card driver > > #device splash # Splash screen and screen saver support > > # syscons is the default console driver, resembling an SCO console > device sc > > # Enable this for the pcvt (VT220 compatible) console driver > #device vt > #options XSERVER # support for X server on a vt console > #options FAT_CURSOR # start with block cursor > > device agp # support several AGP chipsets > > # Floating point support - do not disable. > device npx > > # Power management support (see NOTES for more options) > #device apm > # Add suspend/resume support for the i8254. > device pmtimer > > # PCCARD (PCMCIA) support > # PCMCIA and cardbus bridge support > #device cbb # cardbus (yenta) bridge > #device pccard # PC Card (16-bit) bus > #device cardbus # CardBus (32-bit) bus > > # Serial (COM) ports > device sio # 8250, 16[45]50 based serial ports > > # Parallel port > device ppc > device ppbus # Parallel port bus (required) > device lpt # Printer > device plip # TCP/IP over parallel > device ppi # Parallel port interface device > #device vpo # Requires scbus and da > > # If you've got a "dumb" serial or parallel PCI card that is > # supported by the puc(4) glue driver, uncomment the following > # line to enable it (connects to the sio and/or ppc drivers): > #device puc > > # PCI Ethernet NICs. > #device de # DEC/Intel DC21x4x (``Tulip'') > device em # Intel PRO/1000 adapter Gigabit Ethernet Card > #device ixgb # Intel PRO/10GbE Ethernet Card > #device txp # 3Com 3cR990 (``Typhoon'') > #device vx # 3Com 3c590, 3c595 (``Vortex'') > > # PCI Ethernet NICs that use the common MII bus controller code. > # NOTE: Be sure to keep the 'device miibus' line in order to use > these NICs! > device miibus # MII bus support > #device bfe # Broadcom BCM440x 10/100 Ethernet > #device bge # Broadcom BCM570xx Gigabit Ethernet > #device dc # DEC/Intel 21143 and various workalikes > device fxp # Intel EtherExpress PRO/100B (82557, 82558) > #device lge # Level 1 LXT1001 gigabit ethernet > #device nge # NatSemi DP83820 gigabit ethernet > #evice pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc') > #device re # RealTek 8139C+/8169/8169S/8110S > #device rl # RealTek 8129/8139 > #device sf # Adaptec AIC-6915 (``Starfire'') > #device sis # Silicon Integrated Systems SiS 900/SiS 7016 > #device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet > #device ste # Sundance ST201 (D-Link DFE-550TX) > #device ti # Alteon Networks Tigon I/II gigabit Ethernet > #device tl # Texas Instruments ThunderLAN > #device tx # SMC EtherPower II (83c170 ``EPIC'') > #device vge # VIA VT612x gigabit ethernet > #device vr # VIA Rhine, Rhine II > #device wb # Winbond W89C840F > #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') > > # ISA Ethernet NICs. pccard NICs included. > #device cs # Crystal Semiconductor CS89x0 NIC > # 'device ed' requires 'device miibus' > #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards > #device ex # Intel EtherExpress Pro/10 and Pro/10+ > #device ep # Etherlink III based cards > #device fe # Fujitsu MB8696x based cards > #device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. > #device lnc # NE2100, NE32-VL Lance Ethernet cards > #device sn # SMC's 9000 series of Ethernet chips > #device xe # Xircom pccard Ethernet > > # ISA devices that use the old ISA shims > #device le > > # Wireless NIC cards > #device wlan # 802.11 support > #device an # Aironet 4500/4800 802.11 wireless NICs. > #device awi # BayStack 660 and others > #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. > #device wl # Older non 802.11 Wavelan wireless NIC. > > # Pseudo devices. > device loop # Network loopback > device mem # Memory and kernel memory devices > device io # I/O device > device random # Entropy device > device ether # Ethernet support > device sl # Kernel SLIP > device ppp # Kernel PPP > device tun # Packet tunnel. > device pty # Pseudo-ttys (telnet etc) > device md # Memory "disks" > device gif # IPv6 and IPv4 tunneling > device faith # IPv6-to-IPv4 relaying (translation) > > # The `bpf' device enables the Berkeley Packet Filter. > # Be aware of the administrative consequences of enabling this! > # Note that 'bpf' is required for DHCP. > device bpf # Berkeley packet filter > > # USB support > #device uhci # UHCI PCI->USB interface > #device ohci # OHCI PCI->USB interface > #device ehci # EHCI PCI->USB interface (USB 2.0) > #device usb # USB Bus (required) > #device udbp # USB Double Bulk Pipe devices > #device ugen # Generic > #device uhid # "Human Interface Devices" > #device ukbd # Keyboard > #device ulpt # Printer > #device umass # Disks/Mass storage - Requires scbus and da > #device ums # Mouse > #device urio # Diamond Rio 500 MP3 player > #device uscanner # Scanners > # USB Ethernet, requires mii > #device aue # ADMtek USB Ethernet > #device axe # ASIX Electronics USB Ethernet > #device cdce # Generic USB over Ethernet > #device cue # CATC USB Ethernet > #device kue # Kawasaki LSI USB Ethernet > #device rue # RealTek RTL8150 USB Ethernet > > # FireWire support > #device firewire # FireWire bus code > #device sbp # SCSI over FireWire (Requires scbus and da) > #device fwe # Ethernet over FireWire (non-standard!) > > > > > ==============================[ full boot-up console output: > > > KDB: debugger backends: ddb > KDB: current backend: ddb > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD 5.4-RELEASE-p6 #3: Mon Sep 19 21:47:58 CEST 2005 > root@yin.sonologic.nl:/usr/obj/usr/src/sys/yin-yang-5.4 > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3056.50-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > Features=0xbfebfbff SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memory = 1887436800 (1800 MB) > avail memory = 1840525312 (1755 MB) > ACPI APIC Table: > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 6 > ioapic0 irqs 0-23 on motherboard > ioapic1 irqs 24-47 on motherboard > ioapic2 irqs 48-71 on motherboard > npx0: on motherboard > npx0: INT 16 interface > acpi0: on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > cpu0: on acpi0 > cpu1: on acpi0 > pcib0: port 0xcf8-0xcff on acpi0 > pci0: on pcib0 > pci0: at device 0.1 (no driver attached) > pcib1: at device 2.0 on pci0 > pci1: on pcib1 > pci1: at device 28.0 (no > driver attached) > pcib2: at device 29.0 on pci1 > pci2: on pcib2 > pci1: at device 30.0 (no > driver attached) > pcib3: at device 31.0 on pci1 > pci3: on pcib3 > 3ware device driver for 9000 series storage controllers, version: > 2.50.02.012 > twa0: <3ware 9000 series Storage Controller> port 0x7000-0x70ff mem > 0xfd800000-0xfdffffff,0xfb200000-0xfb2000ff irq 48 at de > vice 1.0 on pci3 > twa0: 4 ports, Firmware FE9X 2.02.00.008, BIOS BE9X 2.02.01.037 > pci0: at device 2.1 (no driver attached) > pcib4: at device 30.0 on pci0 > pci4: on pcib4 > pci4: at device 3.0 (no driver attached) > fxp0: port 0x8400-0x843f mem > 0xfb300000-0xfb31ffff,0xfb341000-0xfb341fff irq 20 at device 4.0 > on pci4 > miibus0: on fxp0 > inphy0: on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > fxp0: Ethernet address: 00:02:b3:d8:8a:b5 > em0: port > 0x8440-0x847f mem 0xfb320000-0xfb33ffff irq 23 at device > 5.0 on pci4 > em0: Ethernet address: 00:02:b3:d8:8b:05 > em0: Speed:N/A Duplex:N/A > isab0: at device 31.0 on pci0 > isa0: on isab0 > atapci0: port > 0x6c60-0x6c6f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 > ata0: channel #0 on atapci0 > ata1: channel #1 on atapci0 > pci0: at device 31.3 (no driver attached) > acpi_button0: on acpi0 > atkbdc0: port 0x64,0x60 irq 1 on acpi0 > atkbd0: irq 1 on atkbdc0 > kbd0 at atkbd0 > fdc0: port 0x3f7,0x3f4-0x3f5,0x3f0-0x3f3 > irq 6 drq 2 on acpi0 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 > on acpi0 > sio0: type 16550A, console > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > ppc0: port 0x778-0x77b,0x378-0x37f irq 7 > drq 3 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > ppbus0: on ppc0 > plip0: on ppbus0 > lpt0: on ppbus0 > lpt0: Interrupt-driven port > ppi0: on ppbus0 > pmtimer0 on isa0 > orm0: at iomem > 0xe3000-0xe3fff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0 > sc0: at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x100> > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > Timecounters tick every 10.000 msec > IPv6 packet filtering initialized, default to accept, logging > limited to 10 packets/entry > IP Filter: v3.4.35 initialized. Default = block all, Logging = enabled > ipfw2 initialized, divert disabled, rule-based forwarding enabled, > default to accept, logging limited to 10 packets/entry by > default > acd0: CDROM at ata0-master PIO4 > SMP: AP CPU #1 Launched! > da0 at twa0 bus 0 target 0 lun 0 > da0: <3ware Logical Disk 00 1.00> Fixed Direct Access SCSI-0 device > da0: 100.000MB/s transfers > da0: 114430MB (234352640 512 byte sectors: 255H 63S/T 14587C) > Mounting root from ufs:/dev/da0s1a > WARNING: / was not properly dismounted > Pre-seeding PRNG: kickstart. > Loading configuration files. > Entropy harvesting: interrupts ethernet point_to_point kickstart. > kernel dumps on /dev/da0s1b > swapon: adding /dev/da0s1b as swap device > Starting file system checks: > /dev/da0s1a: 3713 files, 91129 used, 424942 free (1918 frags, 52878 > blocks, 0.4% fragmentation) > /dev/da0s1e: DEFER FOR BACKGROUND CHECKING > /dev/da0s1f: DEFER FOR BACKGROUND CHECKING > WARNING: /usr was not properly dismounted > WARNING: /var was not properly dismounted > /var: mount pending error: blocks 268 files 3 > Enabling ipfilter. > Setting hostname: yin.sonologic.nl. > fxp0: flags=8843 mtu 1500 > options=b > inet 82.94.245.12 netmask 0xffffffc0 broadcast 82.94.245.63 > inet6 fe80::202:b3ff:fed8:8ab5%fxp0 prefixlen 64 tentative > scopeid 0x1 > ether 00:02:b3:d8:8a:b5 > media: Ethernet autoselect (100baseTX ) > status: active > em0: flags=8843 mtu 1500 > options=b > inet 192.168.0.1 netmask 0xffff0000 broadcast 192.168.255.255 > inet6 fe80::202:b3ff:fed8:8b05%em0 prefixlen 64 tentative > scopeid 0x2 > ether 00:02:b3:d8:8b:05 > media: Ethernet autoselect > status: no carrier > lo0: flags=8049 mtu 16384 > inet 127.0.0.1 netmask 0xff000000 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 > filter sync'd > add net default: gateway 82.94.245.1 > Additional routing options:. > Starting devd. > Mounting NFS file systems:. > Starting syslogd. > Sep 28 13:37:41 yin syslogd: kernel boot file is /boot/kernel/kernel > Checking for core dump on /dev/da0s1b ... > savecore: no dumps found > Setting date via ntp. > Looking for host ntp.xs4all.nl and service ntp > host found : auth1.xs4all.nl > Looking for host 82.94.245.2 and service ntp > host found : enterprise.sonologic.nl > 28 Sep 13:37:43 ntpdate[336]: step time server 194.109.22.18 offset > 1.514066 sec > ELF ldconfig path: /lib /usr/leib /usr/lib/compmat /usr/local/li0b > :a.out ldconfig p ath: /usr/lib/aoLut /usr/lib/compiat/aout > Recoverning vi editor sekssions: is up 100 Mbps Full Duplex > . > Starting usbd. > No USB host controllers found > Starting local daemons:rm: /var/run/bwmon.dat: No such file or directory > Loading configuration files. > Setting hostname: www.issuecrawler.net. > ln: /dev/log: Operation not permitted > Starting syslogd. > Sep 28 13:37:46 www syslogd: kernel boot file is /boot/kernel/kernel > ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib > /usr/local/lib > a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout > /usr/X11R6/lib/aout > Starting local daemons:/usr/local/www/bin/apachectl start: httpd started > . > Updating motd. > Starting sshd. > Starting mysqld daemon with databases from > /usr/local/mysql-standard-4.0.21-unknown-freebsd4.7-i386/data > Starting cron. > Local package initialization:. > > Wed Sep 28 13:37:48 CEST 2005 > Loading configuration files. > Setting hostname: wiki.issuecrawler.net. > ln: /dev/log: Operation not permitted > Starting syslogd. > Sep 28 13:37:49 wiki syslogd: kernel boot file is /boot/kernel/kernel > ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib > a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout > Starting local daemons:Starting mysqld daemon with databases from > /usr/local/mysql-standard-4.0.21-unknown-freebsd4.7-i386/d > ata > Syntax error on line 205 of /usr/local/www/conf/httpd.conf: > Cannot load /usr/local/www/libexec/libphp5.so into server: > /usr/local/lib/libiconv.so.3: Undefined symbol "mbrtowc" > /usr/local/www/bin/apachectl start: httpd could not be started > . > Updating motd. > Starting sshd. > Starting sendmail. > Sep 28 13:37:51 wiki sm-mta[734]: NOQUEUE: SYSERR(root): > opendaemonsocket: daemon IPv6: can't create server SMTP socket: Pro > tocol not supported > Sep 28 13:37:51 wiki sm-mta[734]: NOQUEUE: SYSERR(root): > opendaemonsocket: daemon IPv6: optional socket disabled > Starting cron. > Local package initialization:. > > Wed Sep 28 13:37:51 CEST 2005 > Loading configuration files. > Setting hostname: devel.issuecrawler.net. > ln: /dev/log: Operation not permitted > Starting syslogd. > Sep 28 13:37:52 devel syslogd: kernel boot file is /boot/kernel/kernel > ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib > /usr/local/lib > a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout > /usr/X11R6/lib/aout > Recovering vi editor sessions:. > Starting local daemons:/usr/local/www/bin/apachectl start: httpd started > . > Updating motd. > Starting sshd. > Starting cron. > Starting mysqld daemon with databases from > /usr/local/mysql-standard-4.0.21-unknown-freebsd4.7-i386/data > Local package initialization:. > > Wed Sep 28 13:37:59 CEST 2005 > . > Updating motd. > Starting ntpd. > Configuring syscons: blanktime. > Starting sshd. > Sep 28 13:38:01 devel syslogd: Logging subprocess 889 > (/usr/local/libexec/authlog.pl) exited with status 255. > Starting sendmail. > Initial i386 initialization:. > Additional ABI support:. > Starting cron. > Local package initialization:. > Additional TCP options:. > Starting inetd. > Starting background file system checks in 60 seconds. > > Wed Sep 28 13:38:02 CEST 2005 > > FreeBSD/i386 (yin.sonologic.nl) (ttyd0) > > login: > > > > > -- > K.F.J. Martens, Sonologic, http://www.sonologic.nl/ > Networking, hosting, embedded systems, unix, artificial intelligence. > Public PGP key: http://www.metro.cx/pubkey-gmc.asc > Wondering about the funny attachment your mail program > can't read? Visit http://www.openpgp.org/ >