From owner-freebsd-bugs@FreeBSD.ORG Thu Feb 7 21:20:03 2008 Return-Path: Delivered-To: freebsd-bugs@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BFBE516A417 for ; Thu, 7 Feb 2008 21:20:03 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id ADD4913C461 for ; Thu, 7 Feb 2008 21:20:03 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (gnats@localhost [127.0.0.1]) by freefall.freebsd.org (8.14.2/8.14.2) with ESMTP id m17LK38o007428 for ; Thu, 7 Feb 2008 21:20:03 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.2/8.14.1/Submit) id m17LK3bt007427; Thu, 7 Feb 2008 21:20:03 GMT (envelope-from gnats) Date: Thu, 7 Feb 2008 21:20:03 GMT Message-Id: <200802072120.m17LK3bt007427@freefall.freebsd.org> To: freebsd-bugs@FreeBSD.org From: =?ISO-8859-1?Q?Morten_Str=E5rup?= Cc: Subject: Re: kern/120296: [sata] Unstable SATA on MB with Nvidia MCP 570 SLI chipset. X-BeenThere: freebsd-bugs@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: =?ISO-8859-1?Q?Morten_Str=E5rup?= List-Id: Bug reports List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 07 Feb 2008 21:20:03 -0000 The following reply was made to PR kern/120296; it has been noted by GNATS. From: =?ISO-8859-1?Q?Morten_Str=E5rup?= To: bug-followup@FreeBSD.org, morten@lightworkings.dk Cc: Subject: Re: kern/120296: [sata] Unstable SATA on MB with Nvidia MCP 570 SLI chipset. Date: Thu, 07 Feb 2008 22:16:01 +0100 Here it is again. Hopefully this time with all the info needed. There is a 250 GB seagate disk connected to the nforce sata controller. nas# dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-PRERELEASE #1: Wed Feb 6 00:09:43 CET 2008 root@nas.lightworkings:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80bc8000. Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff80bc81e8. Calibrating clock(s) ... i8254 clock: 1193271 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2300017027 Hz CPU: AMD Athlon(tm) X2 Dual Core Processor BE-2400 (2300.02-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2 Features=0x178bfbff Features2=0x2001 AMD Features=0xea500800 AMD Features2=0x11f Cores per package: 2 L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative usable memory = 4282007552 (4083 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages) 0x0000000000cc6000 - 0x00000000c70f9fff, 3326296064 bytes (812084 pages) 0x0000000100000000 - 0x000000012ffeffff, 805240832 bytes (196592 pages) avail memory = 4118200320 (3927 MB) ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ACPI: RSDP @ 0x0xf92b0/0x0014 (v 0 ACPIAM) ACPI: RSDT @ 0x0xcffd0000/0x003C (v 1 MSIISM OEMRSDT 0x10000704 MSFT 0x00000097) ACPI: FACP @ 0x0xcffd0200/0x0084 (v 2 MSIISM OEMFACP 0x10000704 MSFT 0x00000097) ACPI: DSDT @ 0x0xcffd0440/0x5045 (v 1 1ADGH 1ADGH013 0x00000013 INTL 0x20051117) ACPI: FACS @ 0x0xcffde000/0x0040 ACPI: APIC @ 0x0xcffd0390/0x0070 (v 1 MSIISM OEMAPIC 0x10000704 MSFT 0x00000097) ACPI: MCFG @ 0x0xcffd0400/0x003C (v 1 MSIISM OEMMCFG 0x10000704 MSFT 0x00000097) ACPI: OEMB @ 0x0xcffde040/0x0061 (v 1 MSIISM AMI_OEM 0x10000704 MSFT 0x00000097) ACPI: HPET @ 0x0xcffd5490/0x0038 (v 1 MSIISM OEMHPET0 0x10000704 MSFT 0x00000097) ACPI: SSDT @ 0x0xcffd54d0/0x0248 (v 1 A M I POWERNOW 0x00000001 AMD 0x00000001) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level MADT: Interrupt override: source 14, irq 14 MADT: Interrupt override: source 15, irq 15 ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000 ath_rate: version 1.2 wlan_amrr: wlan: <802.11 Link Layer> null: random: nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: io: ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 6 2008 00:09:35) acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIMC -> bus 0 dev 1 func 0 acpi0: reservation of fec00000, 1000 (3) failed acpi0: reservation of fee00000, 1000 (3) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cff00000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 16 17 18 19 Validation 0 255 N 0 16 17 18 19 After Disable 0 255 N 0 16 17 18 19 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 16 17 18 19 Validation 0 255 N 0 16 17 18 19 After Disable 0 255 N 0 16 17 18 19 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 17 18 19 Validation 0 255 N 0 16 17 18 19 After Disable 0 255 N 0 16 17 18 19 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 16 17 18 19 Validation 0 255 N 0 16 17 18 19 After Disable 0 255 N 0 16 17 18 19 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 17 18 19 Validation 0 255 N 0 16 17 18 19 After Disable 0 255 N 0 16 17 18 19 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 17 18 19 Validation 0 255 N 0 16 17 18 19 After Disable 0 255 N 0 16 17 18 19 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 17 18 19 Validation 0 255 N 0 16 17 18 19 After Disable 0 255 N 0 16 17 18 19 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 17 18 19 Validation 0 255 N 0 16 17 18 19 After Disable 0 255 N 0 16 17 18 19 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 21 22 23 Validation 0 255 N 0 21 22 23 After Disable 0 255 N 0 21 22 23 pci_link9: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 20 Validation 0 255 N 0 20 After Disable 0 255 N 0 20 pci_link10: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 21 22 23 Validation 0 255 N 0 21 22 23 After Disable 0 255 N 0 21 22 23 pci_link11: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 20 Validation 0 255 N 0 20 After Disable 0 255 N 0 20 pci_link12: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 21 22 23 Validation 0 255 N 0 21 22 23 After Disable 0 255 N 0 21 22 23 pci_link13: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 21 22 23 Validation 0 255 N 0 21 22 23 After Disable 0 255 N 0 21 22 23 pci_link14: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 21 22 23 Validation 0 255 N 0 21 22 23 After Disable 0 255 N 0 21 22 23 pci_link15: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 21 22 23 Validation 0 255 N 0 21 22 23 After Disable 0 255 N 0 21 22 23 pci_link16: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 21 22 23 Validation 0 255 N 0 21 22 23 After Disable 0 255 N 0 21 22 23 pci_link17: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 21 22 23 Validation 0 255 N 0 21 22 23 After Disable 0 255 N 0 21 22 23 pci_link18: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 21 22 23 Validation 0 255 N 0 21 22 23 After Disable 0 255 N 0 21 22 23 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x10de rev: 0x1 num: 2 hz: 25000000 opts: legacy_route Timecounter "HPET" frequency 25000000 Hz quality 900 cpu0: on acpi0 cpu0: switching to generic Cx mode powernow0: on cpu0 cpu1: on acpi0 powernow1: on cpu1 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x10de, dev=0x0369, revid=0xa2 domain=0, bus=0, slot=0, func=0 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0360, revid=0xa3 domain=0, bus=0, slot=1, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type I/O Port, range 32, base 0x2f00, size 7, enabled found-> vendor=0x10de, dev=0x0368, revid=0xa3 domain=0, bus=0, slot=1, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x2900, size 6, enabled map[20]: type I/O Port, range 32, base 0x2d00, size 6, enabled map[24]: type I/O Port, range 32, base 0x2e00, size 6, enabled pcib0: matched entry for 0.1.INTA (src \\_SB_.LSMB:0) pci_link13: Picked IRQ 21 with weight 0 pcib0: slot 1 INTA routed to irq 21 via \\_SB_.LSMB found-> vendor=0x10de, dev=0x036c, revid=0xa1 domain=0, bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=7 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfeafb000, size 12, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.LUB0:0) pci_link8: Picked IRQ 22 with weight 0 pcib0: slot 2 INTA routed to irq 22 via \\_SB_.LUB0 found-> vendor=0x10de, dev=0x036d, revid=0xa2 domain=0, bus=0, slot=2, func=1 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfeafac00, size 8, enabled pcib0: matched entry for 0.2.INTB (src \\_SB_.LUB2:0) pci_link10: Picked IRQ 23 with weight 0 pcib0: slot 2 INTB routed to irq 23 via \\_SB_.LUB2 found-> vendor=0x10de, dev=0x036e, revid=0xa1 domain=0, bus=0, slot=4, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled found-> vendor=0x10de, dev=0x037f, revid=0xa3 domain=0, bus=0, slot=5, func=0 class=01-01-85, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0xd480, size 3, enabled map[14]: type I/O Port, range 32, base 0xd400, size 2, enabled map[18]: type I/O Port, range 32, base 0xd080, size 3, enabled map[1c]: type I/O Port, range 32, base 0xd000, size 2, enabled map[20]: type I/O Port, range 32, base 0xcc00, size 4, enabled map[24]: type Memory, range 32, base 0xfeaf9000, size 12, enabled pcib0: matched entry for 0.5.INTA (src \\_SB_.LSA0:0) pci_link15: Picked IRQ 21 with weight 1 pcib0: slot 5 INTA routed to irq 21 via \\_SB_.LSA0 found-> vendor=0x10de, dev=0x037f, revid=0xa3 domain=0, bus=0, slot=5, func=1 class=01-01-85, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0xc880, size 3, enabled map[14]: type I/O Port, range 32, base 0xc800, size 2, enabled map[18]: type I/O Port, range 32, base 0xc480, size 3, enabled map[1c]: type I/O Port, range 32, base 0xc400, size 2, enabled map[20]: type I/O Port, range 32, base 0xc080, size 4, enabled map[24]: type Memory, range 32, base 0xfeaf8000, size 12, enabled pcib0: matched entry for 0.5.INTB (src \\_SB_.LSA1:0) pci_link16: Picked IRQ 22 with weight 1 pcib0: slot 5 INTB routed to irq 22 via \\_SB_.LSA1 found-> vendor=0x10de, dev=0x037f, revid=0xa3 domain=0, bus=0, slot=5, func=2 class=01-01-85, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=c, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0xc000, size 3, enabled map[14]: type I/O Port, range 32, base 0xbc00, size 2, enabled map[18]: type I/O Port, range 32, base 0xb880, size 3, enabled map[1c]: type I/O Port, range 32, base 0xb800, size 2, enabled map[20]: type I/O Port, range 32, base 0xb480, size 4, enabled map[24]: type Memory, range 32, base 0xfeaf7000, size 12, enabled pcib0: matched entry for 0.5.INTC (src \\_SB_.LSA2:0) pci_link18: Picked IRQ 23 with weight 1 pcib0: slot 5 INTC routed to irq 23 via \\_SB_.LSA2 found-> vendor=0x10de, dev=0x0370, revid=0xa2 domain=0, bus=0, slot=6, func=0 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x02 (500 ns) found-> vendor=0x10de, dev=0x0371, revid=0xa2 domain=0, bus=0, slot=6, func=1 class=04-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit, vector masks map[10]: type Memory, range 32, base 0xfeaf0000, size 14, enabled pcib0: matched entry for 0.6.INTB (src \\_SB_.LAZA:0) pci_link12: Picked IRQ 21 with weight 2 pcib0: slot 6 INTB routed to irq 21 via \\_SB_.LAZA found-> vendor=0x10de, dev=0x0373, revid=0xa3 domain=0, bus=0, slot=8, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 8 messages, 64 bit, vector masks MSI-X supports 8 messages in maps 0x18 and 0x1c map[10]: type Memory, range 32, base 0xfeaf6000, size 12, enabled map[14]: type I/O Port, range 32, base 0xb400, size 3, enabled map[18]: type Memory, range 32, base 0xfeafa800, size 8, enabled map[1c]: type Memory, range 32, base 0xfeafa400, size 4, enabled pcib0: matched entry for 0.8.INTA (src \\_SB_.LMAC:0) pci_link11: Picked IRQ 20 with weight 0 pcib0: slot 8 INTA routed to irq 20 via \\_SB_.LMAC found-> vendor=0x10de, dev=0x0373, revid=0xa3 domain=0, bus=0, slot=9, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 8 messages, 64 bit, vector masks MSI-X supports 8 messages in maps 0x18 and 0x1c map[10]: type Memory, range 32, base 0xfeaf5000, size 12, enabled map[14]: type I/O Port, range 32, base 0xb080, size 3, enabled map[18]: type Memory, range 32, base 0xfeafa000, size 8, enabled map[1c]: type Memory, range 32, base 0xfeaf4c00, size 4, enabled pcib0: matched entry for 0.9.INTA (src \\_SB_.LMAD:0) pci_link9: Picked IRQ 20 with weight 1 pcib0: slot 9 INTA routed to irq 20 via \\_SB_.LMAD found-> vendor=0x10de, dev=0x0376, revid=0xa3 domain=0, bus=0, slot=10, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x0374, revid=0xa3 domain=0, bus=0, slot=11, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x0374, revid=0xa3 domain=0, bus=0, slot=12, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x0378, revid=0xa3 domain=0, bus=0, slot=13, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x0375, revid=0xa3 domain=0, bus=0, slot=14, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x0377, revid=0xa3 domain=0, bus=0, slot=15, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x1022, dev=0x1100, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0: at device 0.0 (no driver attached) isab0: port 0x2f00-0x2f7f at device 1.0 on pci0 isa0: on isab0 pci0: at device 1.1 (no driver attached) ohci0: mem 0xfeafb000-0xfeafbfff irq 22 at device 2.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeafb000 ioapic0: routing intpin 22 (PCI IRQ 22) to vector 49 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 10 ports with 10 removable, self powered ehci0: mem 0xfeafac00-0xfeafacff irq 23 at device 2.1 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfeafac00 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 50 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 10 ports each: usb0 usb1: on ehci0 usb1: USB revision 2.0 uhub1: on usb1 uhub1: 10 ports with 10 removable, self powered atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 4.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=60 ostat1=70 ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata0: reset tp2 stat0=20 stat1=30 devices=0x0 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51 ata0: [MPSAFE] ata0: [ITHREAD] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52 ata1: [MPSAFE] ata1: [ITHREAD] atapci1: port 0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f mem 0xfeaf9000-0xfeaf9fff irq 21 at device 5.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcc00 ioapic0: routing intpin 21 (PCI IRQ 21) to vector 53 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfeaf9000 ata2: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd480 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd400 ata2: SATA connect time=0ms ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd080 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd000 ata3: SATA connect status=00000000 ata3: [MPSAFE] ata3: [ITHREAD] atapci2: port 0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f mem 0xfeaf8000-0xfeaf8fff irq 22 at device 5.1 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc080 atapci2: [MPSAFE] atapci2: [ITHREAD] atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfeaf8000 ata4: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc880 atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc800 ata4: SATA connect status=00000000 ata4: [MPSAFE] ata4: [ITHREAD] ata5: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc480 atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc400 ata5: SATA connect status=00000000 ata5: [MPSAFE] ata5: [ITHREAD] atapci3: port 0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f mem 0xfeaf7000-0xfeaf7fff irq 23 at device 5.2 on pci0 atapci3: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb480 atapci3: [MPSAFE] atapci3: [ITHREAD] atapci3: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfeaf7000 ata6: on atapci3 atapci3: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc000 atapci3: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbc00 ata6: SATA connect status=00000000 ata6: [MPSAFE] ata6: [ITHREAD] ata7: on atapci3 atapci3: Reserved 0x8 bytes for rid 0x18 type 4 at 0xb880 atapci3: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb800 ata7: SATA connect status=00000000 ata7: [MPSAFE] ata7: [ITHREAD] pcib1: at device 6.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfeb00000-0xfebfffff pcib1: prefetched decode 0xfd800000-0xfdffffff pcib1: Subtractively decoded bridge. pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1095, dev=0x3114, revid=0x02 domain=0, bus=1, slot=0, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xec00, size 3, enabled pcib1: requested I/O range 0xec00-0xec07: in range map[14]: type I/O Port, range 32, base 0xe880, size 2, enabled pcib1: requested I/O range 0xe880-0xe883: in range map[18]: type I/O Port, range 32, base 0xe800, size 3, enabled pcib1: requested I/O range 0xe800-0xe807: in range map[1c]: type I/O Port, range 32, base 0xe480, size 2, enabled pcib1: requested I/O range 0xe480-0xe483: in range map[20]: type I/O Port, range 32, base 0xe400, size 4, enabled pcib1: requested I/O range 0xe400-0xe40f: in range map[24]: type Memory, range 32, base 0xfebffc00, size 10, enabled pcib1: requested memory range 0xfebffc00-0xfebfffff: good pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKA:0) pci_link0: Picked IRQ 16 with weight 0 pcib1: slot 0 INTA routed to irq 16 via \\_SB_.LNKA found-> vendor=0x102b, dev=0x0519, revid=0x01 domain=0, bus=1, slot=1, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type Memory, range 32, base 0xfebf8000, size 14, enabled pcib1: requested memory range 0xfebf8000-0xfebfbfff: good map[14]: type Prefetchable Memory, range 32, base 0xfd800000, size 23, enabled pcib1: requested memory range 0xfd800000-0xfdffffff: good pcib1: matched entry for 1.1.INTA (src \\_SB_.LNKB:0) pci_link1: Picked IRQ 17 with weight 0 pcib1: slot 1 INTA routed to irq 17 via \\_SB_.LNKB found-> vendor=0x1106, dev=0x3044, revid=0x80 domain=0, bus=1, slot=4, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns) intpin=a, irq=10 powerspec 2 supports D0 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfebff000, size 11, enabled pcib1: requested memory range 0xfebff000-0xfebff7ff: good map[14]: type I/O Port, range 32, base 0xe080, size 7, enabled pcib1: requested I/O range 0xe080-0xe0ff: in range pcib1: matched entry for 1.4.INTA (src \\_SB_.LNKD:0) pci_link3: Picked IRQ 18 with weight 0 pcib1: slot 4 INTA routed to irq 18 via \\_SB_.LNKD atapci4: port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f mem 0xfebffc00-0xfebfffff irq 16 at device 0.0 on pci1 atapci4: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe400 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 54 atapci4: [MPSAFE] atapci4: [ITHREAD] atapci4: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfebffc00 ata8: on atapci4 ata8: SATA connect time=0ms ata8: reset tp1 mask=01 ostat0=50 ostat1=00 ata8: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata8: reset tp2 stat0=50 stat1=00 devices=0x1 ata8: [MPSAFE] ata8: [ITHREAD] ata9: on atapci4 ata9: SATA connect time=0ms ata9: reset tp1 mask=01 ostat0=50 ostat1=00 ata9: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata9: reset tp2 stat0=50 stat1=00 devices=0x1 ata9: [MPSAFE] ata9: [ITHREAD] ata10: on atapci4 ata10: SATA connect time=0ms ata10: reset tp1 mask=01 ostat0=50 ostat1=00 ata10: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata10: reset tp2 stat0=50 stat1=00 devices=0x1 ata10: [MPSAFE] ata10: [ITHREAD] ata11: on atapci4 ata11: SATA connect time=0ms ata11: reset tp1 mask=01 ostat0=50 ostat1=00 ata11: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata11: reset tp2 stat0=50 stat1=00 devices=0x1 ata11: [MPSAFE] ata11: [ITHREAD] vgapci0: mem 0xfebf8000-0xfebfbfff,0xfd800000-0xfdffffff irq 17 at device 1.0 on pci1 fwohci0: port 0xe080-0xe0ff mem 0xfebff000-0xfebff7ff irq 18 at device 4.0 on pci1 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfebff000 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 55 fwohci0: [MPSAFE] fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:10:dc:00:01:07:3b:4e fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0x13dc000 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:10:dc:07:3b:4e fwe0: bpf attached fwe0: Ethernet address: 02:10:dc:07:3b:4e fwip0: on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:10:dc:00:01:07:3b:4e @ 0xfffe00000000, S400, maxrec 2048 sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode pci0: at device 6.1 (no driver attached) nfe0: port 0xb400-0xb407 mem 0xfeaf6000-0xfeaf6fff,0xfeafa800-0xfeafa8ff,0xfeafa400-0xfeafa40f irq 20 at device 8.0 on pci0 nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeaf6000 nfe0: Reserved 0x100 bytes for rid 0x18 type 3 at 0xfeafa800 nfe0: Reserved 0x10 bytes for rid 0x1c type 3 at 0xfeafa400 nfe0: attempting to allocate 8 MSI-X vectors (8 supported) msi: routing MSI-X IRQ 256 to vector 56 msi: routing MSI-X IRQ 257 to vector 57 msi: routing MSI-X IRQ 258 to vector 58 msi: routing MSI-X IRQ 259 to vector 59 msi: routing MSI-X IRQ 260 to vector 60 msi: routing MSI-X IRQ 261 to vector 61 msi: routing MSI-X IRQ 262 to vector 62 msi: routing MSI-X IRQ 263 to vector 63 nfe0: using IRQs 256-263 for MSI-X nfe0: Using 8 MSIX messages miibus0: on nfe0 ciphy0: PHY 0 on miibus0 ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nfe0: bpf attached nfe0: Ethernet address: 00:19:db:cf:4c:c2 nfe0: [MPSAFE] nfe0: [FILTER] nfe0: [MPSAFE] nfe0: [FILTER] nfe0: [MPSAFE] nfe0: [FILTER] nfe0: [MPSAFE] nfe0: [FILTER] nfe0: [MPSAFE] nfe0: [FILTER] nfe0: [MPSAFE] nfe0: [FILTER] nfe0: [MPSAFE] nfe0: [FILTER] nfe0: [MPSAFE] nfe0: [FILTER] nfe1: port 0xb080-0xb087 mem 0xfeaf5000-0xfeaf5fff,0xfeafa000-0xfeafa0ff,0xfeaf4c00-0xfeaf4c0f irq 20 at device 9.0 on pci0 nfe1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeaf5000 nfe1: Reserved 0x100 bytes for rid 0x18 type 3 at 0xfeafa000 nfe1: Reserved 0x10 bytes for rid 0x1c type 3 at 0xfeaf4c00 nfe1: attempting to allocate 8 MSI-X vectors (8 supported) msi: routing MSI-X IRQ 264 to vector 64 msi: routing MSI-X IRQ 265 to vector 65 msi: routing MSI-X IRQ 266 to vector 66 msi: routing MSI-X IRQ 267 to vector 67 msi: routing MSI-X IRQ 268 to vector 68 msi: routing MSI-X IRQ 269 to vector 69 msi: routing MSI-X IRQ 270 to vector 70 msi: routing MSI-X IRQ 271 to vector 71 nfe1: using IRQs 264-271 for MSI-X nfe1: Using 8 MSIX messages miibus1: on nfe1 ciphy1: PHY 1 on miibus1 ciphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nfe1: bpf attached nfe1: Ethernet address: 00:19:db:cf:65:95 nfe1: [MPSAFE] nfe1: [FILTER] nfe1: [MPSAFE] nfe1: [FILTER] nfe1: [MPSAFE] nfe1: [FILTER] nfe1: [MPSAFE] nfe1: [FILTER] nfe1: [MPSAFE] nfe1: [FILTER] nfe1: [MPSAFE] nfe1: [FILTER] nfe1: [MPSAFE] nfe1: [FILTER] nfe1: [MPSAFE] nfe1: [FILTER] pcib2: at device 10.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x0-0x0 pcib2: no prefetched decode pci2: on pcib2 pci2: domain=0, physical bus=2 pcib3: at device 11.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x0-0x0 pcib3: no prefetched decode pci3: on pcib3 pci3: domain=0, physical bus=3 pcib4: at device 12.0 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0x0-0x0 pcib4: no prefetched decode pci4: on pcib4 pci4: domain=0, physical bus=4 pcib5: at device 13.0 on pci0 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0x0-0x0 pcib5: no prefetched decode pci5: on pcib5 pci5: domain=0, physical bus=5 pcib6: at device 14.0 on pci0 pcib6: domain 0 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: I/O decode 0x0-0x0 pcib6: no prefetched decode pci6: on pcib6 pci6: domain=0, physical bus=6 pcib7: at device 15.0 on pci0 pcib7: domain 0 pcib7: secondary bus 7 pcib7: subordinate bus 7 pcib7: I/O decode 0x0-0x0 pcib7: no prefetched decode pci7: on pcib7 pci7: domain=0, physical bus=7 acpi_button0: on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 72 sio0: [FILTER] atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 73 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0065 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 74 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 ahc_isa_probe 2: ioport 0x2c00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed ex_isa_identify() atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xccfff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 258371 -> 100000 procfs registered lapic: Divisor 2, Frequency 100000744 hz Timecounter "TSC" frequency 2300017027 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 238475MB at ata2-master SATA300 ad4: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 ad4: nVidia check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata8-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ad16: 114473MB at ata8-master SATA150 ad16: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad16 ad16: Silicon Image check2 failed ad16: Adaptec check1 failed ad16: LSI (v3) check1 failed ad16: LSI (v2) check1 failed ad16: FreeBSD check1 failed ata9-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad18: 476940MB at ata9-master SATA150 ad18: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad18 ad18: Silicon Image check2 failed ad18: Adaptec check1 failed ad18: LSI (v3) check1 failed ad18: LSI (v2) check1 failed ad18: FreeBSD check1 failed ata10-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad20: 476940MB at ata10-master SATA150 ad20: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue ad20: Silicon Image check2 failed ad20: Adaptec check1 failed ad20: LSI (v3) check1 failed ad20: LSI (v2) check1 failed ad20: FreeBSD check1 failed ata11-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad22: 476940MB at ata11-master SATA150 ad22: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad20 ad22: Silicon Image check2 failed ad22: Adaptec check1 failed ad22: LSI (v3) check1 failed ad22: LSI (v2) check1 failed ad22: FreeBSD check1 failed GEOM: new disk ad22 (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 9 to local APIC 0 ioapic0: Assigning ISA IRQ 12 to local APIC 1 ioapic0: Assigning ISA IRQ 14 to local APIC 0 ioapic0: Assigning ISA IRQ 15 to local APIC 1 ioapic0: Assigning PCI IRQ 16 to local APIC 0 ioapic0: Assigning PCI IRQ 18 to local APIC 1 ioapic0: Assigning PCI IRQ 21 to local APIC 0 ioapic0: Assigning PCI IRQ 22 to local APIC 1 ioapic0: Assigning PCI IRQ 23 to local APIC 0 msi: Assigning MSI-X IRQ 256 to local APIC 1 msi: Assigning MSI-X IRQ 257 to local APIC 0 msi: Assigning MSI-X IRQ 258 to local APIC 1 msi: Assigning MSI-X IRQ 259 to local APIC 0 msi: Assigning MSI-X IRQ 260 to local APIC 1 msi: Assigning MSI-X IRQ 261 to local APIC 0 msi: Assigning MSI-X IRQ 262 to local APIC 1 msi: Assigning MSI-X IRQ 263 to local APIC 0 msi: Assigning MSI-X IRQ 264 to local APIC 1 msi: Assigning MSI-X IRQ 265 to local APIC 0 msi: Assigning MSI-X IRQ 266 to local APIC 1 msi: Assigning MSI-X IRQ 267 to local APIC 0 msi: Assigning MSI-X IRQ 268 to local APIC 1 msi: Assigning MSI-X IRQ 269 to local APIC 0 msi: Assigning MSI-X IRQ 270 to local APIC 1 msi: Assigning MSI-X IRQ 271 to local APIC 0 Trying to mount root from ufs:/dev/ad16s1a start_init: trying /sbin/init WARNING: ZFS is considered to be an experimental feature in FreeBSD. ZFS filesystem version 6 ZFS storage pool version 6 nfe0: link state changed to UP GEOM: Reconfigure ad4s1c, start 0 length 250056705024 end 250056705023 GEOM: Reconfigure ad4s1d, start 0 length 250056705024 end 250056705023