From owner-freebsd-hardware Thu Oct 22 06:46:12 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id GAA02678 for freebsd-hardware-outgoing; Thu, 22 Oct 1998 06:46:12 -0700 (PDT) (envelope-from owner-freebsd-hardware@FreeBSD.ORG) Received: from henoch.cc.fh-lippe.de (henoch.cc.fh-lippe.de [193.16.112.72]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id GAA02323; Thu, 22 Oct 1998 06:42:45 -0700 (PDT) (envelope-from lkoeller@cc.fh-lippe.de) Received: from spock.cc.fh-lippe.de([193.16.118.120]) (28799 bytes) by henoch.cc.fh-lippe.de via sendmail with P:smtp/R:inet_hosts/T:smtp (sender: ) id for ; Thu, 22 Oct 1998 14:28:02 +0200 (MET DST) (Smail-3.2.0.101 1997-Dec-17 #3 built 1998-Feb-3) Received: from odie.lippe.de by spock.cc.fh-lippe.de with smtp (Smail3.1.29.1 #2) id m0zWJqO-0006yeC; Thu, 22 Oct 98 14:27 MET DST Received: from odie.lippe.de (localhost [127.0.0.1]) by odie.lippe.de (8.8.8/8.8.8) with ESMTP id OAA01073; Thu, 22 Oct 1998 14:22:26 +0200 (CEST) (envelope-from lkoeller@odie.lippe.de) Message-Id: <199810221222.OAA01073@odie.lippe.de> X-Mailer: exmh version 2.0.2 2/24/98 From: Lars =?iso-8859-1?Q?K=F6ller?= To: freebsd-hardware@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG cc: lkoeller@odie.lippe.de, Lars.Koeller@Uni-Bielefeld.DE Subject: Still freeze with 3.0-RELEASE, PLEASE give me any suggestions!! X-Face: eCcoCV}FjV*O{6>[1$XP/e%]TJhEw2MF33dFh)^HM7Gfd=[/(4+0a$~ rev 0 int a irq 15 on pci0:13:0 Again no change (after this IRQ 15 is occupied by the vga device and the Adaptec is on IRQ 2)! The system freezes with both SMP and NO-SMP, I've also changed the RAM, the PPro slot 0->1, 1->0, no change at all. 2.2.7-RELEASE is stable, 3.0 freezes with no message on the console, until today!!! I've get the following panic: kernel: type 12 trap, code = 0 Stopped at _dasendorderedtag+0x15: cmpl $0,0xb4(%ebx) db> show registers cs 0x8 ds 0x582a0010 es 0xf01e0010 _vid_set_border+0xb8 ss 0x10 eax 0xc0000000 ecx 0xf1c9ec38 edx 0 ebx 0x306c esp 0xf01ecf8c _etext+0x2b4c ebp 0xf01ecf90 _etext+0x2b50 esi 0xf01f1f8? _dasendorderedtag (sorry, address wrong noted) edi 0xc0000000 eip 0xf010f20d _dasendorderedtag+0x15 efl 0x10286 The hole upgrade/install (aout to elf) was done with X11 disabled. Any suggestions are welcome! Thanks Lars E-Mail: | Lars Koeller Lars.Koeller@Uni-Bielefeld.DE | UNIX Sysadmin lkoeller@cc.fh-lippe.de | Computing Center PGP-key: | University of Bielefeld http://www.nic.surfnet.nl/pgp/pks-toplev.html | Germany ----------- FreeBSD, what else? ---- http://www.freebsd.org ------------- --==_Exmh_-3533862440 Content-Type: text/plain ; name="messages"; charset=us-ascii Content-Description: messages Content-Disposition: attachment; filename="messages" Oct 22 12:23:53 odie /kernel: Copyright (c) 1992-1998 FreeBSD Inc. Oct 22 12:23:53 odie /kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993 Oct 22 12:23:53 odie /kernel: The Regents of the University of California. All rights reserved. Oct 22 12:23:53 odie /kernel: FreeBSD 3.0-RELEASE #0: Thu Oct 22 10:32:22 CEST 1998 Oct 22 12:23:53 odie /kernel: root@odie.lippe.de:/usr/src/sys/compile/GENERICupgrade Oct 22 12:23:53 odie /kernel: Timecounter "i8254" frequency 1193182 Hz cost 3345 ns Oct 22 12:23:53 odie /kernel: CPU: Pentium Pro (199.43-MHz 686-class CPU) Oct 22 12:23:53 odie /kernel: Origin = "GenuineIntel" Id = 0x619 Stepping=9 Oct 22 12:23:53 odie /kernel: Features=0xfbff Oct 22 12:23:53 odie /kernel: real memory = 67108864 (65536K bytes) Oct 22 12:23:53 odie /kernel: avail memory = 62799872 (61328K bytes) Oct 22 12:23:53 odie /kernel: Probing for devices on PCI bus 0: Oct 22 12:23:53 odie /kernel: Correcting Natoma config for non-SMP Oct 22 12:23:53 odie /kernel: chip0: rev 0x02 on pci0.0.0 Oct 22 12:23:53 odie /kernel: chip1: rev 0x01 on pci0.7.0 Oct 22 12:23:53 odie /kernel: ahc0: rev 0x00 int a irq 14 on pci0.12.0 Oct 22 12:23:53 odie /kernel: ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs Oct 22 12:23:53 odie /kernel: ahc1: rev 0x00 int a irq 15 on pci0.13.0 Oct 22 12:23:53 odie /kernel: ahc1: aic7880 Wide Channel A, SCSI Id Oct 22 12:23:53 odie /kernel: =7, 16/255 SCBs Oct 22 12:23:53 odie /kernel: vga0: rev 0x01 int a irq 255 on pci0.14.0 Oct 22 12:23:53 odie /kernel: Probing for devices on the ISA bus: Oct 22 12:23:53 odie /kernel: sc0 at 0x60-0x6f irq 1 on motherboard Oct 22 12:23:53 odie /kernel: sc0: VGA color <8 virtual consoles, flags=0x0> Oct 22 12:23:53 odie /kernel: psm0 at 0x60-0x64 irq 12 on motherboard Oct 22 12:23:53 odie /kernel: psm0: model Generic PS/2 mouse, device ID 0 Oct 22 12:23:53 odie /kernel: sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa Oct 22 12:23:53 odie /kernel: sio0: type 16550A Oct 22 12:23:53 odie /kernel: sio1 at 0x2f8-0x2ff irq 3 on isa Oct 22 12:23:53 odie /kernel: sio1: type 16550A Oct 22 12:23:53 odie /kernel: lpt0 at 0x378-0x37f irq 7 on isa Oct 22 12:23:53 odie /kernel: lpt0: Interrupt-driven port Oct 22 12:23:53 odie /kernel: lp0: TCP/IP capable interface Oct 22 12:23:53 odie /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa Oct 22 12:23:53 odie /kernel: fdc0: FIFO enabled, 8 bytes threshold Oct 22 12:23:53 odie /kernel: fd0: 1.44MB 3.5in Oct 22 12:23:53 odie /kernel: fd1: 1.2MB 5.25in Oct 22 12:23:53 odie /kernel: apm0 on isa Oct 22 12:23:53 odie /kernel: apm: found APM BIOS version 1.2 Oct 22 12:23:53 odie /kernel: npx0 on motherboard Oct 22 12:23:53 odie /kernel: npx0: INT 16 interface Oct 22 12:23:53 odie /kernel: sb0 at 0x220 irq 5 drq 1 on isa Oct 22 12:23:53 odie /kernel: snd0: Oct 22 12:23:53 odie /kernel: sbxvi0 at ? drq 5 on isa Oct 22 12:23:53 odie /kernel: snd0: Oct 22 12:23:53 odie /kernel: sbmidi0 at 0x330 on isa Oct 22 12:23:53 odie /kernel: snd0: Oct 22 12:23:53 odie /kernel: awe0 at 0x620 on isa Oct 22 12:23:53 odie /kernel: AWE32: not detected Oct 22 12:23:53 odie /kernel: Oct 22 12:23:54 odie /kernel: ccd0-3: Concatenated disk drivers Oct 22 12:23:54 odie /kernel: Waiting 8 seconds for SCSI devices to settle Oct 22 12:23:54 odie /kernel: ahc0:A:6: Missed busfree Oct 22 12:23:54 odie /kernel: . Oct 22 12:23:54 odie /kernel: (probe0:ahc0:0:0:2): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x44 Oct 22 12:23:54 odie /kernel: SEQADDR == 0x8 Oct 22 12:23:54 odie /kernel: SSTAT1 == 0x13 Oct 22 12:23:54 odie /kernel: (probe0:ahc0:0:0:2): Queuing a BDR SCB Oct 22 12:23:54 odie /kernel: (probe0:ahc0:0:0:2): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x44 Oct 22 12:23:54 odie /kernel: SEQADDR == 0x4 Oct 22 12:23:54 odie /kernel: SSTAT1 == 0x13 Oct 22 12:23:54 odie /kernel: (probe0:ahc0:0:0:2): no longer in timeout, status = 34b Oct 22 12:23:54 odie /kernel: ahc0: Issued Channel A Bus Reset. 4 SCBs aborted Oct 22 12:23:54 odie /kernel: sa1 at ahc0 bus 0 target 6 lun 0 Oct 22 12:23:54 odie /kernel: sa1: Removable Sequential Access SCSI2 device Oct 22 12:23:54 odie /kernel: sa1: 3.300MB/s transfers Oct 22 12:23:54 odie /kernel: da2 at ahc1 bus 0 target 8 lun 0 Oct 22 12:23:54 odie /kernel: da2: Fixed Direct Access SCSI2 device Oct 22 12:23:54 odie /kernel: da2: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled Oct 22 12:23:54 odie /kernel: da2: 2061MB (4222640 512 byte sectors: 255H 63S/T 262C) Oct 22 12:23:54 odie /kernel: da3 at ahc1 bus 0 target 9 lun 0 Oct 22 12:23:54 odie /kernel: da3: Fixed Direct Access SCSI2 device Oct 22 12:23:54 odie /kernel: da3: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled Oct 22 12:23:54 odie /kernel: da3: 2061MB (4222640 512 byte sectors: 255H 63S/T 262C) Oct 22 12:23:54 odie /kernel: changing root device to da0s2a Oct 22 12:23:54 odie /kernel: ch0 at ahc0 bus 0 target 5 lun 0 Oct 22 12:23:54 odie /kernel: Oct 22 12:23:54 odie /kernel: ch0: Removable Changer SCSI2 device Oct 22 12:23:54 odie /kernel: ch0: 3.300MB/s transfers Oct 22 12:23:54 odie /kernel: ch0: 12 slots, 1 drive, 1 picker, 1 portal Oct 22 12:23:54 odie /kernel: da1 at ahc0 bus 0 target 1 lun 0 Oct 22 12:23:54 odie /kernel: da1: Fixed Direct Access SCSI2 device Oct 22 12:23:54 odie /kernel: da1: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled Oct 22 12:23:54 odie /kernel: da1: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) Oct 22 12:23:54 odie /kernel: da0 at ahc0 bus 0 target 0 lun 0 Oct 22 12:23:54 odie /kernel: da0: Fixed Direct Access SCSI2 device Oct 22 12:23:54 odie /kernel: da0: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled Oct 22 12:23:54 odie /kernel: da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) Oct 22 12:23:54 odie /kernel: (da4:ahc0:0:6:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 Oct 22 12:23:54 odie /kernel: (da4:ahc0:0:6:3): ILLEGAL REQUEST asc:25,0 Oct 22 12:23:54 odie /kernel: (da4:ahc0:0:6:3): Logical unit not supported Oct 22 12:23:54 odie /kernel: (da4:ahc0:0:6:3): fatal error, failed to attach to device(da4:ahc0:0:6:3): removing device entry Oct 22 12:23:54 odie /kernel: WARNING: / was not properly dismounted Oct 22 12:24:00 odie lpd[151]: restarted Oct 22 12:24:05 odie /kernel: PCM device 1 not installed. Oct 22 12:24:06 odie dattape: dattape: Using tapedevice /dev/nrsa1 Oct 22 12:24:06 odie dattape: dattape: Listening to port 620 Oct 22 12:24:20 odie login: ROOT LOGIN (root) ON ttyv0 Oct 22 12:27:22 odie /kernel: (da0:ahc0:0:0:0): tagged openings now 64 Oct 22 12:27:23 odie /kernel: (da0:ahc0:0:0:0): tagged openings now 63 Oct 22 12:44:15 odie /kernel: Copyright (c) 1992-1998 FreeBSD Inc. Oct 22 12:44:15 odie /kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993 Oct 22 12:44:15 odie /kernel: The Regents of the University of California. All rights reserved. Oct 22 12:44:15 odie /kernel: FreeBSD 3.0-RELEASE #0: Thu Oct 22 10:32:22 CEST 1998 Oct 22 12:44:15 odie /kernel: root@odie.lippe.de:/usr/src/sys/compile/GENERICupgrade Oct 22 12:44:15 odie /kernel: Timecounter "i8254" frequency 1193182 Hz cost 3342 ns Oct 22 12:44:15 odie /kernel: CPU: Pentium Pro (199.43-MHz 686-class CPU) Oct 22 12:44:15 odie /kernel: Origin = "GenuineIntel" Id = 0x619 Stepping=9 Oct 22 12:44:15 odie /kernel: Features=0xfbff Oct 22 12:44:15 odie /kernel: real memory = 67108864 (65536K bytes) Oct 22 12:44:15 odie /kernel: avail memory = 62799872 (61328K bytes) Oct 22 12:44:15 odie /kernel: Probing for devices on PCI bus 0: Oct 22 12:44:15 odie /kernel: Correcting Natoma config for non-SMP Oct 22 12:44:15 odie /kernel: chip0: rev 0x02 on pci0.0.0 Oct 22 12:44:15 odie /kernel: chip1: rev 0x01 on pci0.7.0 Oct 22 12:44:15 odie /kernel: ahc0: rev 0x00 int a irq 14 on pci0.12.0 Oct 22 12:44:15 odie /kernel: ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs Oct 22 12:44:15 odie /kernel: ahc1: rev 0x00 int a irq 15 on pci0.13.0 Oct 22 12:44:15 odie /kernel: ahc1: aic7880 Wide Channel A, SCSI Id Oct 22 12:44:15 odie /kernel: =7, 16/255 SCBs Oct 22 12:44:15 odie /kernel: vga0: rev 0x01 int a irq 255 on pci0.14.0 Oct 22 12:44:15 odie /kernel: Probing for devices on the ISA bus: Oct 22 12:44:15 odie /kernel: sc0 at 0x60-0x6f irq 1 on motherboard Oct 22 12:44:15 odie /kernel: sc0: VGA color <8 virtual consoles, flags=0x0> Oct 22 12:44:15 odie /kernel: psm0 at 0x60-0x64 irq 12 on motherboard Oct 22 12:44:15 odie /kernel: psm0: model Generic PS/2 mouse, device ID 0 Oct 22 12:44:16 odie /kernel: sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa Oct 22 12:44:16 odie /kernel: sio0: type 16550A Oct 22 12:44:16 odie /kernel: sio1 at 0x2f8-0x2ff irq 3 on isa Oct 22 12:44:16 odie /kernel: sio1: type 16550A Oct 22 12:44:16 odie /kernel: lpt0 at 0x378-0x37f irq 7 on isa Oct 22 12:44:16 odie /kernel: lpt0: Interrupt-driven port Oct 22 12:44:16 odie /kernel: lp0: TCP/IP capable interface Oct 22 12:44:16 odie /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa Oct 22 12:44:16 odie /kernel: fdc0: FIFO enabled, 8 bytes threshold Oct 22 12:44:16 odie /kernel: fd0: 1.44MB 3.5in Oct 22 12:44:16 odie /kernel: fd1: 1.2MB 5.25in Oct 22 12:44:16 odie /kernel: apm0 on isa Oct 22 12:44:16 odie /kernel: apm: found APM BIOS version 1.2 Oct 22 12:44:16 odie /kernel: npx0 on motherboard Oct 22 12:44:16 odie /kernel: npx0: INT 16 interface Oct 22 12:44:16 odie /kernel: sb0 at 0x220 irq 5 drq 1 on isa Oct 22 12:44:16 odie /kernel: snd0: Oct 22 12:44:16 odie /kernel: sbxvi0 at ? drq 5 on isa Oct 22 12:44:16 odie /kernel: snd0: Oct 22 12:44:16 odie /kernel: sbmidi0 at 0x330 on isa Oct 22 12:44:16 odie /kernel: snd0: Oct 22 12:44:16 odie /kernel: awe0 at 0x620 on isa Oct 22 12:44:16 odie /kernel: AWE32: not detected Oct 22 12:44:16 odie /kernel: Oct 22 12:44:16 odie /kernel: ccd0-3: Concatenated disk drivers Oct 22 12:44:16 odie /kernel: Waiting 8 seconds for SCSI devices to settle Oct 22 12:44:16 odie /kernel: sa0 at ahc0 bus 0 target Oct 22 12:44:16 odie /kernel: 3 lun 0 Oct 22 12:44:16 odie /kernel: sa0: Removable Sequential Access SCSI2 device Oct 22 12:44:16 odie /kernel: sa0: 7.812MB/s transfers (7.812MHz, offset 15) Oct 22 12:44:16 odie /kernel: sa1 at ahc0 bus 0 target 6 lun 0 Oct 22 12:44:16 odie /kernel: sa1: Removable Sequential Access SCSI2 device Oct 22 12:44:16 odie /kernel: sa1: 10.0MB/s transfers (10.0MHz, offset 8) Oct 22 12:44:16 odie /kernel: da1 at ahc0 bus 0 target 1 lun 0 Oct 22 12:44:16 odie /kernel: da1: Fixed Direct Access SCSI2 device Oct 22 12:44:16 odie /kernel: da1: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled Oct 22 12:44:16 odie /kernel: da1: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) Oct 22 12:44:16 odie /kernel: da2 at ahc1 bus 0 target 8 lun 0 Oct 22 12:44:16 odie /kernel: da2: Fixed Direct Access SCSI2 device Oct 22 12:44:16 odie /kernel: da2: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled Oct 22 12:44:16 odie /kernel: da2: 2061MB (4222640 512 byte sectors: 255H 63S/T 262C) Oct 22 12:44:16 odie /kernel: da3 at ahc1 bus 0 target 9 lun 0 Oct 22 12:44:16 odie /kernel: da3: Fixed Direct Access SCSI2 device Oct 22 12:44:16 odie /kernel: da3: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled Oct 22 12:44:16 odie /kernel: da3: 2061MB (4222640 512 byte sectors: 255H 63S/T 262C) Oct 22 12:44:16 odie /kernel: da0 at ahc0 bus 0 target 0 lun 0 Oct 22 12:44:16 odie /kernel: da0: Fixed D Oct 22 12:44:16 odie /kernel: irect Access SCSI2 device Oct 22 12:44:16 odie /kernel: da0: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled Oct 22 12:44:16 odie /kernel: da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) Oct 22 12:44:16 odie /kernel: cd0 at ahc0 bus 0 target 4 lun 0 Oct 22 12:44:16 odie /kernel: cd0: Removable CD-ROM SCSI2 device Oct 22 12:44:16 odie /kernel: cd0: 10.0MB/s transfers (10.0MHz, offset 15) Oct 22 12:44:16 odie /kernel: cd0: cd present [304767 x 2048 byte records] Oct 22 12:44:16 odie /kernel: ch0 at ahc0 bus 0 target 5 lun 0 Oct 22 12:44:16 odie /kernel: ch0: Removable Changer SCSI2 device Oct 22 12:44:16 odie /kernel: ch0: 3.300MB/s transfers Oct 22 12:44:16 odie /kernel: ch0: 12 slots, 1 drive, 1 picker, 1 portal Oct 22 12:44:16 odie /kernel: changing root device to da0s2a Oct 22 12:44:16 odie /kernel: WARNING: / was not properly dismounted Oct 22 12:44:19 odie lpd[196]: restarted Oct 22 12:44:24 odie /kernel: PCM device 1 not installed. Oct 22 12:44:25 odie dattape: dattape: Using tapedevice /dev/nrsa1 Oct 22 12:44:25 odie dattape: dattape: Listening to port 620 Oct 22 12:44:46 odie login: ROOT LOGIN (root) ON ttyv0 Oct 22 12:46:21 odie /kernel: (da0:ahc0:0:0:0): tagged openings now 64 Oct 22 12:46:22 odie /kernel: (da0:ahc0:0:0:0): tagged openings now 63 Oct 22 12:46:44 odie login: ROOT LOGIN (root) ON ttyv1 Oct 22 13:03:25 odie /kernel: (da2:ahc1:0:8:0): tagged openings now 64 Oct 22 13:03:25 odie /kernel: (da2:ahc1:0:8:0): tagged openings now 63 Oct 22 13:03:55 odie /kernel: (da3:ahc1:0:9:0): tagged openings now 64 Oct 22 13:03:55 odie /kernel: (da3:ahc1:0:9:0): tagged openings now 63 Oct 22 13:31:37 odie /kernel: (da1:ahc0:0:1:0): tagged openings now 64 Oct 22 13:31:38 odie /kernel: (da1:ahc0:0:1:0): tagged openings now 62 Oct 22 13:31:38 odie /kernel: (da1:ahc0:0:1:0): tagged openings now 61 --==_Exmh_-3533862440 Content-Type: text/plain ; name="ODIE"; charset=us-ascii Content-Description: ODIE Content-Disposition: attachment; filename="ODIE" # # ODIE kernel config file # machine "i386" cpu "I686_CPU" # aka Pentium Pro(tm) ident ODIE maxusers 32 config kernel root on da1 # This allows you to actually store this configuration file into # the kernel binary itself, where it may be later read by saying: # strings /kernel | grep ^___ | sed -e 's/^___//' > MYKERNEL # options INCLUDE_CONFIG_FILE # Include this file in kernel # Create a SMP capable kernel (mandatory options): #options SMP #Smmetric Multiprocessor Kernel #options APIC_IO #Smmetric (APIC) I/O # Lets always enable the kernel debugger for SMP. options DDB # # Certain applications can grow to be larger than the 128M limit # that FreeBSD initially imposes. Below are some options to # allow that limit to grow to 256MB, and can be increased further # with changing the parameters. MAXDSIZ is the maximum that the # limit can be set to, and the DFLDSIZ is the default value for # the limit. You might want to set the default lower than the # max, and explicitly set the maximum with a shell command for processes # that regularly exceed the limit like INND. # options "MAXDSIZ=(256*1024*1024)" options "DFLDSIZ=(256*1024*1024)" options INET #InterNETworking options FFS #Berkeley Fast Filesystem #options NFS #Network Filesystem #options MFS #Memory Filesystem #options MSDOSFS #MSDOS Filesystem #options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 #options MROUTING #Multicast routing options MAXCONS=8 #Number of max. allowed virt. consoles options QUOTA #enable disk quotas #options COMPAT_LINUX #Linux Emulator #options "COMPAT_IBCS2" #SCO & SYSV Emulator options PERFMON #Pentium (Pro) performance counters options SYSVSHM #System V shared memory support options SYSVSEM #System V Semophore support options SYSVMSG #System V Message support options UCONSOLE #Allow ordinary users to take the #console - this is useful for X. options XSERVER #include code for XFree86 options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options SC_HISTORY_SIZE=512 #number of history buffer lines # # KTRACE enables the system-call tracing facility ktrace(2). # options KTRACE #kernel tracing # # ISA devices # controller isa0 options "AUTO_EOI_1" options "AUTO_EOI_2" controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 device apm0 at isa? #controller pnp0 # # PCI devices # controller pci0 options SCSI_DELAY=8000 # Be pessimistic about Joe SCSI device options SCSI_REPORT_GEOMETRY # Adaptec 2940[U/UW] SCSI Adapter controller ahc0 controller ahc1 # Devices connected device ch0 device da0 device sa0 device cd0 device pass0 # The syntax for wiring down devices is: # AH2940 U controller scbus0 at ahc0 # Seagate ST15150N disk da0 at scbus0 target 0 disk da1 at scbus0 target 1 # Seagate Python 28388, DDS2 tape sa0 at scbus0 target 3 # PIONEER CD-ROM DR-U12X auf ID 4 device cd0 at scbus? # Adic Autochanger mit HP DAT, DDS2 device ch0 at scbus0 target 5 tape sa1 at scbus0 target 6 # AH 2940 UW controller scbus1 at ahc1 # Seagate ST32171W disk da2 at scbus1 target 8 disk da3 at scbus1 target 9 # ps2 mouse device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr device npx0 at isa? port "IO_NPX" iosiz 0x0 flags 0x0 irq 13 vector npxintr # sio1 (dcf-77) # serial console options BREAK_TO_DEBUGGER # a BREAK on a comconsole goes to DDB options CONSPEED=19200 #default speed for serial console (default 9600) device sio0 at isa? port "IO_COM1" tty flags 0x10 irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device ed0 at isa? port 0x280 net irq ? iomem 0xe8000 vector edintr # # Audio drivers: `snd', `sb', `pas', `gus', `pca' # controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device awe0 at isa? port 0x620 #device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0 vector pcmintr pseudo-device loop pseudo-device ether pseudo-device ccd 4 pseudo-device snp 3 #Snoop device - to look at pty/vty/etc.. pseudo-device bpfilter 4 pseudo-device sl 2 # ijppp uses tun instead of ppp device pseudo-device ppp 2 pseudo-device tun 3 pseudo-device pty 128 pseudo-device gzip #Exec gzipped a.out's pseudo-device vn #Vnode driver (turns a file into a device) # i4b passive ISDN cards support (isic - I4b Siemens Isdn Chipset driver) # note that the ``options'' and ``device'' lines must BOTH be defined ! # Teles S0/16.3 options "TEL_S0_16_3" device isic0 at isa? port 0xd80 net irq 10 flags 0x04 vector isicintr # i4b passive cards D channel handling # Q.921 pseudo-device "i4bq921" # Q.931 pseudo-device "i4bq931" # common passive and active layer 4 # layer 4 pseudo-device "i4b" # userland driver to do ISDN tracing (for passive cards oly) pseudo-device "i4btrc" 4 # userland driver to control the whole thing pseudo-device "i4bctl" # userland driver for access to raw B channel pseudo-device "i4brbch" 4 # userland driver for telephony pseudo-device "i4btel" 2 # network driver for IP over raw HDLC ISDN pseudo-device "i4bipr" 4 # enable VJ header compression detection for ipr i/f options IPR_VJ # network driver for sync PPP over ISDN pseudo-device "i4bisppp" 4 pseudo-device sppp 4 --==_Exmh_-3533862440 Content-Type: text/plain ; name="xdm.log"; charset=us-ascii Content-Description: xdm.log Content-Disposition: attachment; filename="xdm.log" XFree86 Version 3.3.2 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: March 2 1998 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 3.0-980221-SNAP i386 Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 0): NV1, STG2000, RIVA128, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975, 3dimage985, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_virge, s3_svga, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct64200, ct64300, generic Using syscons driver with X support (version 2.0) (using VT number 5) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) module xf86Jstk.so successfully loaded from /usr/X11R6/lib/modules (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) XKB: layout: "us-de" (**) Mouse: type: MouseSystems, device: /dev/mouse, baudrate: 1200 (**) Mouse: buttons: 3 (**) SVGA: Graphics device ID: "Matrox Millenium 8MB" (**) SVGA: Monitor ID: "ELSA ECOMO 21H95" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/freefont,/usr/local/lib/pcemu/font" (--) SVGA: PCI: Matrox MGA 2064W rev 1, Memory @ 0xe0000000, 0xe1000000 (--) SVGA: Linear framebuffer at 0xE1000000 (--) SVGA: MMIO registers at 0xE0000000 (--) SVGA: Video BIOS info block at 0x000c7d00 (--) SVGA: chipset: mga2064w (--) SVGA: videoram: 8192k (**) SVGA: Option "hw_cursor" (**) SVGA: Option "dac_8_bit" (**) SVGA: Option "power_saver" (**) SVGA: Using 32 bpp, Depth 24, Color weight: 888 (--) SVGA: Maximum allowed dot-clock: 220.000 MHz (**) SVGA: Mode "1280x1024": mode clock = 157.500 (**) SVGA: Mode "1152x864": mode clock = 137.650 (**) SVGA: Mode "1024x768": mode clock = 115.500 (**) SVGA: Mode "800x600": mode clock = 69.650 (**) SVGA: Mode "640x480": mode clock = 45.800 (--) SVGA: Virtual resolution set to 1280x1024 (--) SVGA: SpeedUp code selection modified because virtualX != 1024 (--) SVGA: MCLK set to 50.000 MHz (--) SVGA: Using hardware cursor (--) SVGA: Using XAA (XFree86 Acceleration Architecture) (--) SVGA: XAA: Solid filled rectangles (--) SVGA: XAA: Screen-to-screen copy (--) SVGA: XAA: 8x8 color expand pattern fill (--) SVGA: XAA: CPU to screen color expansion (TE/NonTE imagetext, TE/NonTE polytext) (--) SVGA: XAA: Using 10 128x128 areas for pixmap caching (--) SVGA: XAA: Caching tiles and stipples (--) SVGA: XAA: General lines and segments (--) SVGA: XAA: Dashed lines and segments xdm error (pid 335): fatal IO error 32 (Broken pipe) X connection to :0.0 broken (explicit kill or server shutdown). --==_Exmh_-3533862440-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message