From owner-freebsd-stable Tue Jun 6 5:38: 2 2000 Delivered-To: freebsd-stable@freebsd.org Received: from privatecube.privatelabs.com (privatecube.privatelabs.com [198.143.31.30]) by hub.freebsd.org (Postfix) with ESMTP id 5C91637B8CB for ; Tue, 6 Jun 2000 05:37:54 -0700 (PDT) (envelope-from mi@privatelabs.com) Received: from misha.privatelabs.com (root@misha.privatelabs.com [198.143.31.6]) by privatecube.privatelabs.com (8.9.2/8.9.2) with ESMTP id IAA30061 for ; Tue, 6 Jun 2000 08:37:01 -0400 (EDT) Received: (from mi@localhost) by misha.privatelabs.com (8.9.3/8.9.3) id IAA70234 for stable@freebsd.org; Tue, 6 Jun 2000 08:36:52 -0400 (EDT) (envelope-from mi) From: Mikhail Teterin Message-Id: <200006061236.IAA70234@misha.privatelabs.com> Subject: using shared irq%d To: stable@freebsd.org Date: Tue, 6 Jun 2000 08:36:52 -0400 (EDT) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Why am I seeing this every once in a while: using shared irq7 ? The only driver using irq7 seems to be the ppc... Here is the machine's dmesg : Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-STABLE #0: Thu Jun 1 18:51:36 EDT 2000 root@murlo.zaytman.com:/tmp/src/sys/compile/MURLO Calibrating clock(s) ... TSC clock: 100001606 Hz, i8254 clock: 1193261 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium/P54C (90.00-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x524 Stepping = 4 Features=0x7bf real memory = 134217728 (131072K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00398000 - 0x07ff7fff, 130416640 bytes (31840 pages) avail memory = 127021056 (124044K bytes) Programming 16 pins in IOAPIC #0 EISA INTCONTROL = 00000c00 IOAPIC #0 intpin 2 -> irq 0 SMP: CPU0 apic_initialize(): lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00030010, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00030010, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec01000 bios32: Found BIOS32 Service Directory header at 0xc00fff70 bios32: Entry = 0xfd1b1 (c00fd1b1) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xaea pnpbios: Found PnP BIOS data at 0xc00f62e0 pnpbios: Entry = f0000:cacf Rev = 1.0 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "murlo" at 0xc037c000. Intel Pentium detected, installing workaround for F00F bug SMP: CPU0 bsp_apic_configure(): lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x00000000 (0x80000000) pci_open(1b): mode1res=0x80000000 (0xff000001) pci_cfgcheck: device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 -- nothing found pci_open(2): mode 2 enable port (0x0cf8) is 0x00 pci_open(2a): mode2res=0x0e (0x0e) pci_open(2a): now trying mechanism 2 pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=04a38086) npx0: on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 271242749 bytes/sec bzero() bandwidth = 422013836 bytes/sec pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x00000000 (0x80000000) pci_open(1b): mode1res=0x80000000 (0xff000001) pci_cfgcheck: device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 -- nothing found pci_open(2): mode 2 enable port (0x0cf8) is 0x00 pci_open(2a): mode2res=0x0e (0x0e) pci_open(2a): now trying mechanism 2 pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=04a38086) pcib0: on motherboard found-> vendor=0x8086, dev=0x04a3, revid=0x11 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x0482, revid=0x04 class=00-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x100c, dev=0x3206, revid=0x00 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base fe000000, size 24 found-> vendor=0x9004, dev=0x5078, revid=0x00 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base 00008000, size 8 map[14]: type 1, range 32, base ff000000, size 12 found-> vendor=0x1095, dev=0x0640, revid=0x02 class=01-01-0a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=14 found-> vendor=0x1011, dev=0x0009, revid=0x12 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 00008100, size 7 map[14]: type 1, range 32, base ff001000, size 7 pci0: on pcib0 CPU: Pentium, 90MHz, CPU->Memory posting ON, read around write Warning: Cache parity disabled! Cache: 256KB writeback, cache clocks=3-2-2-2/4-2-2-2 Cache flags: byte-control DRAM: page mode memory clocks=X-4-4-4 (70ns), RAS-wait, CAS-wait CPU->PCI: posting ON, burst mode ON, PCI clocks=2-1-1-1 PCI->Memory: posting ON Refresh: RAS#Only isab0: at device 1.0 on pci0 eisa0: on isab0 mainboard0: on eisa0 slot 0 isa0: on isab0 pci0: (vendor=0x100c, dev=0x3206) at 2.0 irq 10 ahc0: port 0x8000-0x80ff mem 0xff000000-0xff000fff irq 10 at device 3.0 on pci0 ahc0: No SEEPROM available. ahc0: Using left over BIOS settings ahc0: aic7850 Single Channel A, SCSI Id=7, 3/255 SCBs ahc0: Downloading Sequencer Program... 411 instructions downloaded ide_pci0: irq 14 at device 4.0 on pci0 ide_pci0: driver is using old-style compatability shims de0: port 0x8100-0x817f mem 0xff001000-0xff00107f irq 11 at device 5.0 on pci0 de0: SMC 9332DST 21140 [10-100Mb/s] pass 1.2 de0: address 00:00:c0:15:cb:e4 de0: enabling 10baseT port de0: supplying EUI64: 00:00:c0:ff:fe:15:cb:e4 bpf: de0 attached Trying Read_Port at 203 ESS0000: adding io range 0x800-0xfff, size=0x8, align=0x8 ESS1868: start dependant ESS1868: adding dma mask 0x2 ESS1868: adding dma mask 0x9 ESS1868: adding irq mask 0x20 ESS1868: adding io range 0x220-0x22f, size=0x10, align=0 ESS1868: adding io range 0x388-0x38b, size=0x4, align=0 ESS1868: adding io range 0x330-0x331, size=0x2, align=0 ESS1868: start dependant ESS1868: adding dma mask 0x2 ESS1868: adding dma mask 0x9 ESS1868: adding irq mask 0x6a0 ESS1868: adding io range 0x220-0x24f, size=0x10, align=0x20 ESS1868: adding io range 0x388-0x38b, size=0x4, align=0 ESS1868: adding io range 0x300-0x331, size=0x2, align=0x30 ESS1868: start dependant ESS1868: adding dma mask 0xb ESS1868: adding dma mask 0xb ESS1868: adding irq mask 0x1ea0 ESS1868: adding io range 0x220-0x28f, size=0x10, align=0x20 ESS1868: adding io range 0x388-0x38b, size=0x4, align=0 ESS1868: adding io range 0x300-0x331, size=0x2, align=0x30 ESS1868: start dependant ESS1868: adding dma mask 0xb ESS1868: adding dma mask 0xb ESS1868: adding irq mask 0x1ea0 ESS1868: adding io range 0x220-0x28f, size=0x10, align=0x20 ESS1868: adding io range 0x388-0x38b, size=0x4, align=0 ESS1868: adding io range 0x800-0xfff, size=0x2, align=0x2 ESS1868: start dependant ESS1868: adding dma mask 0xb ESS1868: adding dma mask 0xb ESS1868: adding irq mask 0x1ea0 ESS1868: adding io range 0x220-0x28f, size=0x10, align=0x20 ESS1868: adding io range 0x800-0xfff, size=0x4, align=0x4 ESS1868: adding io range 0x800-0xfff, size=0x2, align=0x2 ESS1868: end dependant ESS0001: start dependant ESS0001: adding io range 0x201-0x201, size=0x1, align=0 ESS0001: start dependant ESS0001: adding io range 0x200-0x20f, size=0x1, align=0x1 ESS0001: end dependant isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 90 03 c8 psm: status 90 03 c8 psm: status 90 03 c8 psm: data 08 00 00 psm: status 10 00 64 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7006d fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 a1 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 a1 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: on isa0 sc0: VGA <12 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) wdc0 at port 0x1f0-0x1f7 irq 14 on isa0 wdc0: CMD640B workaround enabled wdc0: unit 0 (wd0): wd0: 1219MB (2496816 sectors), 2477 cyls, 16 heads, 63 S/T, 512 B/S wd0: ATA INQUIRE valid = 0003, dmamword = 0107, apio = 0003, udma = 0000 wdc0: driver is using old-style compatability shims wdc1 at port 0x170-0x177 irq 15 on isa0 wdc1: unit 0 (wd2): wd2: 405MB (830760 sectors), 989 cyls, 15 heads, 56 S/T, 512 B/S wd2: ATA INQUIRE valid = 0003, dmamword = 0003, apio = 0001, udma = 0000 wdc1: driver is using old-style compatability shims fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0x61 0x71 0x61 0x61 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x61 0x69 0x61 0x61 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: configured irq 2 not in bitmap of probed irqs 0 sio2: irq maps: 0x61 0x61 0x61 0x61 sio2: probe failed test(s): 0 1 2 4 6 7 9 sio3: configured irq 12 not in bitmap of probed irqs 0x200 sio3: irq maps: 0x61 0x261 0x61 0x61 sio3 at port 0x2e8-0x2ef irq 12 on isa0 sio3: type 16550A joy0 at port 0x201 on isa0 ppc0: parallel port found at 0x378 ppc0: SMC registers CR1=0xbe CR4=0x0 SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC FDC37C665GT chipset (PS2/NIBBLE) in COMPATIBLE mode vpo0: can't connect to the drive imm0: (disconnect) s1=0x0 s2=0x0, s3=0x0 imm0: (connect) s1=0x0 s2=0x0, s3=0x0 imm0: can't connect to the drive lpt0: on ppbus0 lpt0: Interrupt-driven port isa_probe_children: probing PnP devices unknown0: at port 0x800-0x807 on isa0 sbc1: at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,0 on isa0 pcm0: on sbc1 pcm0: ESS1868 detected pcm: setmap a000, 1000; 0xc7572000 -> a000 pcm: setmap b000, 1000; 0xc7573000 -> b000 joy1: at port 0x200 on isa0 SMP: enabled INTs: 1, 3, 4, 5, 6, 7, 10, 11, 12, 14, 15, apic_imen: 0x00ff2305 BIOS Geometries: 0:02693f3f 0..617=618 cylinders, 0..63=64 heads, 1..63=63 sectors 1:03db0e38 0..987=988 cylinders, 0..14=15 heads, 1..56=56 sectors 2:03f13f20 0..1009=1010 cylinders, 0..63=64 heads, 1..32=32 sectors 0 accounted for Device configuration finished. APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to accept, unlimited logging DUMMYNET initialized (000106) new masks: bio 4800c040, tty 430010ba, net 470018ba bpf: lo0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: stf0 attached bpf: faith0 attached Linux-ELF exec handler installed BRIDGE 990810, have 8 interfaces -- index 1 type 6 phy 0 addrl 6 addr 00.00.c0.15.cb.e4 IPsec: Initialized Security Association Processing. Waiting 2 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. SMP: AP CPU #1 Launched! SMP: CPU1 apic_initialize(): lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff (probe2:ahc0:0:2:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe2:ahc0:0:2:0): ILLEGAL REQUEST asc:24,0 (probe2:ahc0:0:2:0): Invalid field in CDB sks:c8,1 ahc0: target 2 synchronous at 4.0MHz, offset = 0xf ahc0: target 0 synchronous at 10.0MHz, offset = 0xf Creating DISK da0 Creating DISK cd0 pass0 at ahc0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-2 device pass0: Serial Number 00686676 pass0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled pass1 at ahc0 bus 0 target 2 lun 0 pass1: Removable CD-ROM SCSI-2 device pass1: 4.237MB/s transfers (4.237MHz, offset 15) Mounting root from ufs:/dev/wd0a da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: Serial Number 00686676 da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 1010MB (2069860 512 byte sectors: 64H 32S/T 1010C) wd0s1: type 0xa5, start 63, end = 2494169, size 2494107 : OK WARNING: / was not properly dismounted start_init: trying /sbin/init cd0 at ahc0 bus 0 target 2 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 4.237MB/s transfers (4.237MHz, offset 15) cd0: cd present [268581 x 2048 byte records] da0: invalid primary partition table: no magic wd2s1: type 0x6, start 56, end = 389759, size 389704 : OK wd2s2: type 0xa5, start 389760, end = 830759, size 441000 : OK wd2s1: type 0x6, start 56, end = 389759, size 389704 : OK wd2s2: type 0xa5, start 389760, end = 830759, size 441000 : OK da0: invalid primary partition table: no magic de0: starting DAD for fe80:0001::0200:c0ff:fe15:cbe4 de0: DAD complete for fe80:0001::0200:c0ff:fe15:cbe4 - no duplicates found bpf: tun0 attached TIA. -mi To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message