From owner-freebsd-current Sun Jan 30 21:30:41 2000 Delivered-To: freebsd-current@freebsd.org Received: from tantivy.stanford.edu (tantivy.Stanford.EDU [171.64.234.70]) by hub.freebsd.org (Postfix) with ESMTP id 2FCEA14CE7 for ; Sun, 30 Jan 2000 21:30:36 -0800 (PST) (envelope-from techie@tantivy.stanford.edu) Received: (from techie@localhost) by tantivy.stanford.edu (8.9.3/8.9.1) id VAA46265 for current@freebsd.org; Sun, 30 Jan 2000 21:30:35 -0800 (PST) Date: Sun, 30 Jan 2000 21:30:35 -0800 (PST) From: Bob Vaughan Message-Id: <200001310530.VAA46265@tantivy.stanford.edu> To: current@freebsd.org Subject: suspend problems Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG i'm running world built on the 26th, and a kernel built immediately afterwards.. machine is a chembook 3300. if i suspend, upon resuming i get a brief flash of X, and then a black screen. i have to kill X to get a display back. also, while my 3c574 comes back up, it loses the configuration info that was entered by hand after the card came up. (actually, this might have happened when i killed X.. the realaudio stream that i was playing when i suspended came back when i resumed..) Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #9: Thu Jan 27 02:08:53 PST 2000 techie@roadwarrior.stanford.edu:/c1/current/src/sys/compile/ROADWARRIOR Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P55C (233.86-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x543 Stepping = 3 Features=0x8001bf real memory = 100663296 (98304K bytes) avail memory = 93683712 (91488K bytes) Preloaded elf kernel "kernel" at 0xc03b4000. Preloaded elf module "splash_bmp.ko" at 0xc03b409c. Preloaded elf module "vesa.ko" at 0xc03b4140. Preloaded splash_image_data "/boot/splash.bmp" at 0xc03b41dc. Preloaded elf module "cd9660.ko" at 0xc03b422c. Preloaded elf module "linux.ko" at 0xc03b42cc. Intel Pentium detected, installing workaround for F00F bug VESA: v1.2, 2048k memory, flags:0x0, mode table:0xc00c7a88 (c0007a88) VESA: Copyright 1994 TRIDENT MICROSYSTEMS INC. md0: Malloc disk apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 isab0: at device 1.0 on pci0 isa0: on isab0 ata-pci0: port 0x1100-0x110f at device 1.1 on pci0 ata0 at 0x01f0 irq 14 on ata-pci0 ata1 at 0x0170 irq 15 on ata-pci0 uhci0: irq 0 at device 1.2 on pci0 uhci0: could not map ports device_probe_and_attach: uhci0 attach returned 6 chip1: port 0x1400-0x140f at device 1.3 on pci0 vga-pci0: mem 0xfe000000-0xfe3fffff,0xfe7f0000-0xfe7fffff,0xfdc00000-0xfdffffff at device 2.0 on pci0 pcic-pci0: irq 10 at device 3.0 on pci0 pcic-pci1: irq 10 at device 3.1 on pci0 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60-0x6f on isa0 atkbd0: irq 1 on atkbdc0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> pcic: management irq 10 pcic0: at irq 10 on isa0 pccard0: on pcic0 pccard1: on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio2: not probed (disabled) sio3: not probed (disabled) ppc0: at port 0x378-0x37f irq 7 flags 0x40 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode lpt0: on ppbus0 lpt0: Interrupt-driven port unknown0: at port 0x800-0x807 on isa0 sbc0: at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,0 on isa0 pcm0: on sbc0 unknown1: at port 0x201 on isa0 pccard: card inserted, slot 1 ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ad0: 3909MB [7944/16/63] at ata0-master using UDMA33 acd0: CDROM at ata1-master using PIO4 Mounting root from ufs:/dev/ad0s1a ep0: <3Com 3C574B, Megahertz 3CCFE574BT or Fast Etherlink 3C574-TX> at port 0x240-0x25f irq 9 slot 1 on pccard1 ep0: Ethernet address 00:50:04:8f:2a:8b ep0: unload stray irq 9 pccard: card disabled, slot 1 pccard: card inserted, slot 1 resumed from suspended mode (slept 00:01:30) ata0: resetting devices .. done ata1: resetting devices .. done ep0: <3Com 3C574B, Megahertz 3CCFE574BT or Fast Etherlink 3C574-TX> at port 0x240-0x25f irq 9 slot 1 on pccard1 ep0: Ethernet address 00:50:04:8f:2a:8b # # ROADWARRIOR -- Laptop machine with ide/usb/pcmcia/tools # # $Id: ROADWARRIOR,v 1.143.3.1.3 1999/12/08 23:00:00 techie Exp $ machine "i386" cpu I586_CPU # aka Pentium(tm) ident ROADWARRIOR maxusers 30 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) syscall trace support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores ## options from LINT options MD5 options PERFMON options NETATALK options ICMP_BANDLIM options PCIC_RESUME_RESET options MROUTING # Multicast routing options POWERFAIL_NMI options INCLUDE_CONFIG_FILE options DDB options PPP_BSDCOMP #PPP BSD-compress support options PPP_DEFLATE #PPP zlib/deflate/gzip support options PPP_FILTER #enable bpf filtering (needs bpf) #options PNPBIOS device isa0 #device pnp0 device pci0 device ata0 device atadisk0 device atapicd0 #device atapifd0 options ATA_ENABLE_ATAPI_DMA device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # atkbdc0 controlls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? port ? conflicts pseudo-device splash pseudo-device md device sc0 at isa? # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor device npx0 at nexus? port IO_NPX irq 13 device apm0 at nexus? flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support device pcic0 at isa? device pcic1 at isa? device card0 device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 irq 7 device ppbus0 # Parallel port bus (required) device lpt0 # Printer #device plip0 # TCP/IP over parallel #device ppi0 # Parallel port interface device device ep0 device ed0 device ed1 at isa? port 0x320 irq 11 conflicts iomem 0xd8000 # audio device pcm0 device sbc0 pseudo-device loop pseudo-device ether pseudo-device tun 4 pseudo-device pty 64 pseudo-device gzip # Exec gzipped a.out's pseudo-device bpf 4 # Berkeley packet filter pseudo-device snp # USB support device uhci0 # UHCI PCI->USB interface device usb0 # USB Bus (required) device ugen0 # Generic device uhid0 # "Human Interface Devices" device ukbd0 # Keyboard device ulpt0 # Printer #device umass0 # Disks/Mass storage - Requires scbus and da0 device ums0 # Mouse -- Welcome My Son, Welcome To The Machine -- Bob Vaughan | techie@{w6yx|tantivy}.stanford.edu | kc6sxc@w6yx.ampr.org | P.O. Box 19792, Stanford, Ca 94309 -- I am Me, I am only Me, And no one else is Me, What could be simpler? -- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message