From owner-freebsd-questions Thu Aug 24 5:50: 8 2000 Delivered-To: freebsd-questions@freebsd.org Received: from smtpproxy1.mitre.org (mb-20-100.mitre.org [129.83.20.100]) by hub.freebsd.org (Postfix) with ESMTP id 8661437B424 for ; Thu, 24 Aug 2000 05:50:03 -0700 (PDT) Received: from avsrv1.mitre.org (avsrv1.mitre.org [129.83.20.58]) by smtpproxy1.mitre.org (8.9.3/8.9.3) with ESMTP id IAA11451 for ; Thu, 24 Aug 2000 08:49:57 -0400 (EDT) Received: from mailsrv2.mitre.org (mailsrv2.mitre.org [129.83.221.17]) by smtpsrv1.mitre.org (8.9.3/8.9.3) with ESMTP id IAA29885 for ; Thu, 24 Aug 2000 08:47:25 -0400 (EDT) Received: from mitre.org ([128.29.145.140]) by mailsrv2.mitre.org (Netscape Messaging Server 4.1) with ESMTP id FZSRN800.IZI; Thu, 24 Aug 2000 08:49:56 -0400 Message-ID: <39A51796.B600DB3C@mitre.org> Date: Thu, 24 Aug 2000 08:39:50 -0400 From: "Andresen,Jason R." Organization: The MITRE Corporation X-Mailer: Mozilla 4.73 [en]C-20000509M (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: kstewart@urx.com Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: Strange conflict References: <39A42600.9A8A7A85@mitre.org> <39A42A04.84D91736@urx.com> <39A42A61.407170FA@mitre.org> <39A42D2F.19DA3ECB@urx.com> <39A42D92.BDA993A3@mitre.org> <39A430AF.6E4C60AC@urx.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Kent Stewart wrote: > > "Andresen,Jason R." wrote: > > > > Kent Stewart wrote: > > > > > > "Andresen,Jason R." wrote: > > > > > > > > Which makes it look like the card is taking irq 11, not 5. Even more > > > > interesting is that the Soundblaster is the only card that reports > > > > taking irq 5. Is it possible for the device to lie on the dmesg output? > > > > > > I've never seen that happen but that doesn't mean it can't. What about > > > dma and i/o port addresses? The SB usually used something like dma 1,5 > > > and i/o 220 and 330. > > > > > > The only machine I have an old SB in is only setup to run Win2K > > > Server. > > > > Well, for comparison: > > > > rl0: port 0xe800-0xe8ff mem > > 0xe6801000-0xe68010ff irq 11 at device 15.0 on pci0 > > rl0: Ethernet address: 00:48:54:85:63:3a > > miibus0: on rl0 > > rlphy0: on miibus0 > > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > ... > > sbc0: at port 0x220-0x22f irq 5 drq 1 flags 0x15 on > > isa0 > > sbc0: setting card to irq 5, drq 1, 5 > > pcm0: on sbc0 > > > > Annoyingly, I can't seem to find an conflict with either of the cards > > over the entire dmesg output (as posted in my original post). The > > Realtek is a PCI card, so they aren't even close to the same address > > space as the ISA SB, plus IIRC the RealTek is in some sort of horrible > > PIO mode due to the braindead design of the chipset (that's what you get > > for paying $5 for a NIC I guess). > > I would try Rick's approach and reserve IRQ for legacy. > > I had a 3C509 that I use for my DSL line have it's IRQ grabbed by an > Adaptec Scsi card after I pulled on Intel 100+ NIC out. None of them > were $5 cards :). Unfortunatly, that didn't work. I reserved IRQ 5 for the SB and its symptoms are unchanged. The cards work fine together in Windows, so it isn't some sort of hard device conflict. Is there any possible action for me to take, or am I going to have to go out and buy a new NIC (I'm afraid to buy a new Soundcard until newpcm settles down a little)? -- _ _ _ ___ ____ ___ ______________________________________ / \/ \ | ||_ _|| _ \|___| | Jason Andresen -- jandrese@mitre.org / /\/\ \ | | | | | |/ /|_|_ | Views expressed may not reflect those /_/ \_\|_| |_| |_|\_\|___| | of the Mitre Corporation. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message