From owner-freebsd-questions Fri Aug 6 7:49:42 1999 Delivered-To: freebsd-questions@freebsd.org Received: from unix.megared.net.mx (megared.net.mx [207.249.162.252]) by hub.freebsd.org (Postfix) with ESMTP id 89DBE155CF for ; Fri, 6 Aug 1999 07:49:31 -0700 (PDT) (envelope-from ales@megared.net.mx) Received: from ales (ales.megared.net.mx [207.249.163.252]) by unix.megared.net.mx (8.9.3/8.9.3) with SMTP id JAA56475; Fri, 6 Aug 1999 09:48:13 -0500 (CDT) (envelope-from ales@megared.net.mx) Message-ID: <00f501bee01a$bcad5440$fca3f9cf@megared.net.mx> From: "Alejandro Ramirez" To: "Roy Bettle" , "Questions List FreeBSD.org" References: <37A9FF62.16F3529F@criterion-group.com> Subject: RE: Dual 3C590B config issue. Date: Fri, 6 Aug 1999 09:48:24 -0500 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I think you have to recompile your kernel with 2 lines refering both of your cards with the IRQ´s and all the card values in it. And for the second question maybe: "ls *xxx -lR | more", you should "man ls" for more options. Ales ----- Original Message ----- From: Roy Bettle To: Questions List FreeBSD.org Sent: Thursday, August 05, 1999 4:17 PM Subject: Dual 3C590B config issue. > Good afternoon. How do I initialize the second card? > > Quick summary: > > -- The 3Com utility "3c90xcfg.exe" from a DOS bootdisk located both NICs > and the testing portion of the utility pronounced them fit for service. > -- I only have 3 cards in the box - video and two NICs - and have turned > off all unnecessary integrated peripherals (COM2, LPT1, etc.) so free > IRQs and DMAs aren't a problem. Presently: "eth0"= IRQ5, 0x320, > "eth1"=IRQ7, 0x330. > -- First card, "eth0", initialized fine during the FreeBSD 3.2-RELEASE > (What you call the June 99 CD set from Walnut Creek, right?). > -- Ran a test "deinstall/reinstall" of Communicator via FTP and all went > well. > > Problem: > > How do I add the second card (trying to replace a RedHat 2.0.36 IPMasq > server)? > > -- Ran /stand/sysinstall and basically was presented with an opportunity > to modify the settings for the first card; the second one didn't seem to > be accessible. > > Is there some command-line option I need to add to be able to configure > the second card? > > Also, with regard to the "ls" command, is there a Web resource I can > reference to better understand it's range of functionality? I am quite > conversant with the DOS/Novell "dir" command set (i.e.- "dir *.xxx /s /w > /p", etc.) and would like to be able to use "ls" to provide me with the > same type of information. > > Thanks for all your help (and all the messages each day; believe it or > not, I try to read them all). > > RAB > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message