From owner-freebsd-scsi Fri Oct 25 16:38:01 1996 Return-Path: owner-freebsd-scsi Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id QAA04323 for freebsd-scsi-outgoing; Fri, 25 Oct 1996 16:38:01 -0700 (PDT) Received: from sumter.awod.com (awod.com [198.81.225.1]) by freefall.freebsd.org (8.7.5/8.7.3) with ESMTP id QAA04305; Fri, 25 Oct 1996 16:37:56 -0700 (PDT) Received: (from klam@localhost) by sumter.awod.com (8.7.6/8.6.12) id TAA14205; Fri, 25 Oct 1996 19:37:49 -0400 (EDT) Date: Fri, 25 Oct 1996 19:37:49 -0400 (EDT) From: Ken Lam Message-Id: <199610252337.TAA14205@sumter.awod.com> To: current@freebsd.org, scsi@freebsd.org Subject: current and 2940 lockup during boot Sender: owner-freebsd-scsi@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I just cvsupped Justin's tweaks and rebuilt. During the bootup process, it probes my first 3 devices (2 hds, 1 jazz drive) then locks up with a white cursor and fails to probe the 4th (a toshiba cdrom). My configuration is a P5-90/Neptune chipset 3c509 AHA2940U FreeBSD is on my scsi drives I have tagged queuing enabled. I am planning to disable that to determine if that is causing my problems. FYI for those adventure some users :) --- below is my normal boot (actually, booting from a slightly older kernel than my last sup 3 days ago which worked as well) FreeBSD 2.2-CURRENT #0: Wed Sep 18 11:16:53 EDT 1996 lam@tsunami.awod.com:/mnt/tmp/src/sys/compile/KL3 Calibrating clock(s) relative to mc146818A clock... i586 clock: 90211713 Hz, i8254 clock: 1193279 Hz CPU: Pentium (90.20-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x521 Stepping=1 Features=0x1bf real memory = 33554432 (32768K bytes) avail memory = 31510528 (30772K bytes) Probing for devices on PCI bus 0: chip0 rev 17 on pci0:0 chip1 rev 3 on pci0:2 ahc0 rev 0 int a irq 11 on pci0:6 ahc0: aic7880 Single Channel, SCSI Id=7, 16 SCBs ahc0 waiting for scsi devices to settle ahc0: target 0 Tagged Queuing Device (ahc0:0:0): "SEAGATE ST31200N 9410" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 1006MB (2061108 512 byte sectors) (ahc0:2:0): "MAXTOR LXT-340S 6.57" type 0 fixed SCSI 1 sd1(ahc0:2:0): Direct-Access 324MB (665154 512 byte sectors) ahc0: target 3 Tagged Queuing Device (ahc0:3:0): "iomega jaz 1GB H.62" type 0 removable SCSI 2 sd2(ahc0:3:0): Direct-Access sd2(ahc0:3:0): ILLEGAL REQUEST asc:24,0 Invalid field in CDB sd2 could not mode sense (4). Using ficticious geometry sd2(ahc0:3:0): NOT READY asc:3a,0 Medium not present sd2: could not get size 0MB (0 512 byte sectors) (ahc0:4:0): "TOSHIBA CD-ROM XM-5201TA 3014" type 5 removable SCSI 2 cd0(ahc0:4:0): CD-ROM cd0(ahc0:4:0): NOT READY asc:3a,0 Medium not present can't get the size vga0 rev 1 on pci0:14 Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in fd1: 1.2MB 5.25in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 696MB (1427328 sectors), 1416 cyls, 16 heads, 63 S/T, 512 B/S 1 3C5x9 board(s) on ISA found at 0x300 ep0 at 0x300-0x30f irq 10 on isa ep0: aui/utp/bnc[*BNC*] address 00:a0:24:00:fe:a6 npx0 on motherboard npx0: INT 16 interface