From owner-freebsd-scsi Thu Aug 24 22:59:58 2000 Delivered-To: freebsd-scsi@freebsd.org Received: from cs4.cs.ait.ac.th (cs4.cs.ait.ac.th [192.41.170.15]) by hub.freebsd.org (Postfix) with ESMTP id 4823A37B423 for ; Thu, 24 Aug 2000 22:59:54 -0700 (PDT) Received: from banyan.cs.ait.ac.th (on@banyan.cs.ait.ac.th [192.41.170.5]) by cs4.cs.ait.ac.th (8.9.3/8.9.3) with ESMTP id MAA24528 for ; Fri, 25 Aug 2000 12:59:51 +0700 (GMT+0700) Received: (from on@localhost) by banyan.cs.ait.ac.th (8.8.5/8.8.5) id MAA07000; Fri, 25 Aug 2000 12:59:50 +0700 (ICT) Date: Fri, 25 Aug 2000 12:59:50 +0700 (ICT) Message-Id: <200008250559.MAA07000@banyan.cs.ait.ac.th> X-Authentication-Warning: banyan.cs.ait.ac.th: on set sender to on@banyan.cs.ait.ac.th using -f From: Olivier Nicole To: freebsd-scsi@FreeBSD.ORG In-reply-to: (message from Matthew Jacob on Thu, 24 Aug 2000 22:50:07 -0700 (PDT)) Subject: Re: Tandberg SLR 100 References: Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >Is this SLR a QIC device? Yes it is, well, it is a quater inch cartridge, but it is not a QIC standard yet (?) >Typically, QIC type tapes are problematic. I bought an SLR-5 to test with >FreeBSD last year- that seems to work. The current quirk table entry should >match correctly for it. Any idea where/what is this table for FreeBSD 3.5? >The QIC issues usually are: need 1 filemark only (quirks can handle this, also >doing a 'mt seteotmodel'- see mt(1)- can make this explicit), usually need to >be in fixed block mode (at 1024 byte blocks). I have seen that discussion. >So- the answer is "I haven't tried it. Should work." Hopefully one of the >folks who use QICs more than I do can chime in. I'd recommend at least 4.0. Any one that can tell me it works (given this and that configuration) or it definitely does not work? I could go for DLT, but I like QIC like technology better :) Olivier To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message