From owner-freebsd-hardware Thu Dec 24 07:12:40 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id HAA10709 for freebsd-hardware-outgoing; Thu, 24 Dec 1998 07:12:40 -0800 (PST) (envelope-from owner-freebsd-hardware@FreeBSD.ORG) Received: from abby.skypoint.net (abby.skypoint.net [199.86.32.252]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id HAA10693 for ; Thu, 24 Dec 1998 07:12:38 -0800 (PST) (envelope-from bruce@zuhause.mn.org) Received: (from uucp@localhost) by abby.skypoint.net (8.8.7/jl 1.3) with UUCP id JAA11513; Thu, 24 Dec 1998 09:12:19 -0600 (CST) Received: (from bruce@localhost) by zuhause.mn.org (8.9.1/8.9.1) id JAA78766; Thu, 24 Dec 1998 09:00:51 -0600 (CST) (envelope-from bruce) From: Bruce Albrecht MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <13954.22306.733363.415028@zuhause.zuhause.mn.org> Date: Thu, 24 Dec 1998 09:00:50 -0600 (CST) To: Mark turpin Cc: Brett Glass , hardware@FreeBSD.ORG Subject: Re: Good, cheap 100BaseT Ethernet cards? In-Reply-To: References: <4.1.19981213163548.06cd3450@mail.lariat.org> X-Mailer: VM 6.62 under 20.4 "Emerald" XEmacs Lucid Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Mark turpin writes: > On Sun, 13 Dec 1998, Brett Glass wrote: > > > I'm looking for some good, cheap 100BaseT Ethernet cards which are > > supported by drivers included with FreeBSD. Unfortunately, the ones listed > > in the "Readme" are "name brands" -- and are going for $80-100 instead of > > the $20 that most people seem to be paying for Ethernet NICs for WinDoze. > > For example, the Netgear FA310TX is priced in the mid-$20's and comes from > > a reputable company, but I can't tell if it will work. > > > RealTek 8139 based card. They are 10/100Mbps PCI, work with > FreeBSD (rl0 driver), and you can get them for $15-$20. I have about > 20 of them. I have a $20 RealTek 8139 card, and while it's rock solid and gives reasonable transfer rates at 10 Mbps, it's only capable of doing about 50 Mbps sustained transfers in 100 Mbps mode and eats up 25% of a 200 MHz PPro's CPU. And that was before Bill Paul made it copy buffers nearly all the time because of alignment problems I reported with PPP traffic. If I find an Intel EtherExpress 100 for < $40, I'm going to replace the RealTek in a shot. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message