From owner-freebsd-questions Fri Mar 5 5:26:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from slug.ceca.utc.edu (slug.ceca.utc.edu [192.239.43.15]) by hub.freebsd.org (Postfix) with ESMTP id 6F5AD1518D for ; Fri, 5 Mar 1999 05:26:19 -0800 (PST) (envelope-from mike-ward@utc.edu) Received: from utc.edu (localhost.ceca.utc.edu [127.0.0.1]) by slug.ceca.utc.edu (8.9.1/8.9.1) with ESMTP id IAA25048 for ; Fri, 5 Mar 1999 08:26:02 -0500 (EST) (envelope-from mike-ward@utc.edu) Message-ID: <36DFDB69.3973F5C2@utc.edu> Date: Fri, 05 Mar 1999 08:26:02 -0500 From: Mike Ward Slug Root Reply-To: mike-ward@utc.edu Organization: UTC X-Mailer: Mozilla 4.5 [en] (X11; I; FreeBSD 3.0-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: top/procps/xosview for SMP FreeBSD-3.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have been running FreeBSD 3.0 on a Dell PowerEdge 4300 (dual PII 400) since an early november 98 SNAP version...currently it is upgraded to 3.0 using walnut creek cdrom. Anyways I cant seem to find the patch/port/package for top or xosview to allow it to "see" both processors. Any ideas/help. Please respond directly to my email above. Thanks mjw mike-ward@utc.edu A dmesg to show that both CPUs are found Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-RELEASE #0: Fri Feb 5 06:59:20 EST 1999 root@slug.ceca.utc.edu:/usr/src/sys/compile/SMPSLUG Timecounter "i8254" frequency 1193182 Hz cost 3244 ns CPU: Pentium II (quarter-micron) (686-class CPU) Origin = "GenuineIntel" Id = 0x651 Stepping=1 Features=0x183fbff> real memory = 536870912 (524288K bytes) avail memory = 519708672 (507528K bytes) Programming 24 pins in IOAPIC #0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Probing for devices on PCI bus 0: chip0: rev 0x02 on pci0.0.0 chip1: rev 0x02 on pci0.1.0 chip2: rev 0x03 on pci0.2.0 chip3: rev 0x02 on pci0.7.0 ide_pci0: rev 0x01 on pci0.7.1 Freeing (NOT implemented) redirected ISA irq 0. chip4: rev 0x01 int d irq 2 on pci0.7.2 chip5: rev 0x02 on pci0.7.3 fxp0: rev 0x02 int a irq 20 on pci0.8.0 fxp0: Ethernet address 00:a0:c9:e1:e1:28 Probing for devices on PCI bus 1: vga0: rev 0x5c on pci1.0.0 Probing for devices on PCI bus 2: ahc0: rev 0x00 int a irq 16 on pci2.4.0 ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc1: rev 0x03 int a irq 16 on pci2.6.0 ahc1: aic7860 Single Channel A, SCSI Id=7, 3/255 SCBs ahc2: rev 0x01 int a irq 18 on pci2.10.0 ahc2: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs Probing for PnP devices: Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface psm0 at 0x60-0x64 irq 12 on motherboard psm0: model ThinkingMouse, device ID 0 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in npx0 on motherboard npx0: INT 16 interface APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 Waiting 15 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! sa0 at ahc2 bus 0 target 6 lun 0 sa0: Removable Sequential Access SCSI2 device sa0: 10.0MB/s transfers (10.0MHz, offset 15) pass2 at ahc0 bus 0 target 6 lun 0 pass2: Fixed Processor SCSI2 device pass2: 3.300MB/s transfers da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI2 device da0: 80.0MB/s transfers (40.0MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 8683MB (17783249 512 byte sectors: 255H 63S/T 1106C) da1 at ahc0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI2 device da1: 80.0MB/s transfers (40.0MHz, offset 31, 16bit), Tagged Queueing Enabled da1: 8683MB (17783249 512 byte sectors: 255H 63S/T 1106C) changing root device to da0s1a cd0 at ahc1 bus 0 target 5 lun 0 cd0: Removable CD-ROM SCSI2 device cd0: 20.0MB/s transfers (20.0MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present (da0:ahc0:0:0:0): tagged openings now 38 (da1:ahc0:0:1:0): tagged openings now 38 pid 305 (netscape), uid 0: exited on signal 4 (core dumped) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message