From owner-freebsd-mobile  Sat Nov  1 18:09:06 1997
Return-Path: <owner-freebsd-mobile>
Received: (from root@localhost)
          by hub.freebsd.org (8.8.7/8.8.7) id SAA21508
          for mobile-outgoing; Sat, 1 Nov 1997 18:09:06 -0800 (PST)
          (envelope-from owner-freebsd-mobile)
Received: from ns.mt.sri.com (SRI-56K-FR.mt.net [206.127.65.42])
          by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id SAA21503
          for <freebsd-mobile@freebsd.org>; Sat, 1 Nov 1997 18:09:02 -0800 (PST)
          (envelope-from nate@rocky.mt.sri.com)
Received: from rocky.mt.sri.com (rocky.mt.sri.com [206.127.76.100])
	by ns.mt.sri.com (8.8.7/8.8.7) with ESMTP id TAA04382;
	Sat, 1 Nov 1997 19:08:55 -0700 (MST)
Received: (from nate@localhost) by rocky.mt.sri.com (8.7.5/8.7.3) id TAA00926; Sat, 1 Nov 1997 19:08:54 -0700 (MST)
Date: Sat, 1 Nov 1997 19:08:54 -0700 (MST)
Message-Id: <199711020208.TAA00926@rocky.mt.sri.com>
From: Nate Williams <nate@mt.sri.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
To: Guido van Rooij <guido@gvr.org>
Cc: freebsd-mobile@freebsd.org
Subject: Re: problems after PAO -> 2.2.5 stable
In-Reply-To: <199711012319.AAA00780@gvr.gvr.org>
References: <199711012319.AAA00780@gvr.gvr.org>
X-Mailer: VM 6.29 under 19.15 XEmacs Lucid
Sender: owner-freebsd-mobile@freebsd.org
X-Loop: FreeBSD.org
Precedence: bulk

[
I'm not sure why, but you have *REALLY* long lines you're using, which
are made mostly of just white-space tagged on the end what is giving my
mailer fits.
]

> I've ben hapily using a Nokia modem card for GSM phones on the PAO
> release. I just upgraded to 2.2.5-stable and cannot get it to
> work. pccardd says it is unable to allocate a driver for it.
> What also happens is that when I insert this card into slot 1,
> the 3Com etherlinkIII card in slot 0 no longer works.

This is strange.  What does the entry for /etc/pccard.conf look like for
the ethernet card?

> >From my kernel config file:
> 
> device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
> device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
> 
> >From pccard.conf:

> # Nokia GSM
> card "Nokia Mobile Phones" "DTP-2 ver II"
>         config 0x20 "sio1" 3 0x2f8

What the heck is this 0x2f8 stuff at the end of your config line?  Is it
a PAO extension?  Anyway, if you read the email I sent to the list, you
need to pick the entry that corresponds to "sio1/0x2f8", which is not
index 0x20, but index 0x22

> Tuple #14, code = 0x1b (Configuration entry), length = 8
>     000:  22 18 a3 60 f8 02 07 03
> 	Config index = 0x22
> 	Card decodes 3 address lines, 8 Bit I/O only
> 		I/O address # 1: block start = 0x2f8 block length = 0x8
> 		IRQ modes:
> 		IRQ level = 3

Unfortunately, it looks like it only supports IRQ 3 as well. 

So:
card "Nokia Mobile Phones" "DTP-2 ver II"
	config 0x22 "sio1" 3

Should work.


Nate