From owner-freebsd-questions Sun Jan 21 16: 2:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from seralph10.essex.ac.uk (seralph10.essex.ac.uk [155.245.240.160]) by hub.freebsd.org (Postfix) with ESMTP id 9C31F37B400 for ; Sun, 21 Jan 2001 16:01:57 -0800 (PST) Received: from so-16671-x0.essex.ac.uk ([155.245.119.80] helo=cartman) by seralph10.essex.ac.uk with smtp (Exim 3.13 #1) id 14KUQm-0001WG-00 for freebsd-questions@freebsd.org; Mon, 22 Jan 2001 00:01:56 +0000 From: "Steven" To: "FreeBSD Questions" Subject: Sound Question + Error in handbook? Date: Sun, 21 Jan 2001 23:58:14 -0000 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Taking into consideration that my router has now had far too much uptime/been working too long, i thought it was about time i start fiddling with it (in the sadistic hope that i might break it and have to spend time fixing it - weekends are very dull when things actually work). I decided to recompile the kernel with sound support, as the machine has no monitor or internal speaker and hence no real way of attracting my attention. Whilst following the directions in the handbook on page http://www.freebsd.org/handbook/x8611.html I found the following line under settings to SB compatible ISA non PnP cards: device sbc0 at isa? port0x220 irq 5 drq 1 flags 0x15 Surely this should be: device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15 ? I tried it with the first just incase, but got a syntax error. Anyway, I recompiled following the instructions in the handbook, but once the new kernel was loaded and i did "dmesg | grep pcm" i got no output. There were no errors during compilation (other than the normal warnings). In my dmesg output there is the following lines: unknown1: