From owner-freebsd-mobile Thu Apr 6 15:44:21 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from voyager.fisicc-ufm.edu (ip-198-202.guate.net [209.198.197.202]) by hub.freebsd.org (Postfix) with ESMTP id E110937B89F for ; Thu, 6 Apr 2000 15:43:41 -0700 (PDT) (envelope-from obonilla@voyager.fisicc-ufm.edu) Received: (from obonilla@localhost) by voyager.fisicc-ufm.edu (8.9.3/8.9.3) id QAA00402 for freebsd-mobile@freebsd.org; Thu, 6 Apr 2000 16:43:25 -0600 (CST) (envelope-from obonilla) Date: Thu, 6 Apr 2000 16:43:25 -0600 From: Oscar Bonilla To: freebsd-mobile@freebsd.org Subject: Sony Vaio CD-ROM Message-ID: <20000406164325.A333@fisicc-ufm.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I'm trying to make the Vaio CDROM (PCMCIA Interface) work with -CURRENT. this is the CIS for the card: Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: dc 00 ff Common memory device information: Device number 1, type Function specific, WPS = ON Speed = 100nS, Memory block size = 512b, 1 units Tuple #2, code = 0x15 (Version 1 info), length = 26 000: 04 01 20 00 4e 69 6e 6a 61 41 54 41 2d 00 56 31 010: 2e 30 00 41 50 30 30 20 00 ff Version = 4.1, Manuf = [ ],card vers = [NinjaATA-] Addit. info = [V1.0],[AP00 ] Tuple #3, code = 0x1a (Configuration map), length = 5 000: 01 23 00 02 03 Reg len = 2, config register addr = 0x200, last config = 0x23 Registers: XX------ Tuple #4, code = 0x1b (Configuration entry), length = 21 000: e1 01 3d 11 55 1e fc 23 f0 61 80 01 07 86 03 01 010: 30 68 d0 10 00 Config index = 0x21(default) Interface byte = 0x1 (I/O) Vcc pwr: Nominal operating supply voltage: 5 x 1V Max current average over 1 second: 1.5 x 100mA Wait scale Speed = 1.5 x 1 us Card decodes 3 address lines, 8 Bit I/O only IRQ modes: Level IRQ level = 3 Memory space length = 0x61f0 Tuple #5, code = 0x1b (Configuration entry), length = 15 000: 22 38 f0 61 90 01 07 96 03 01 30 68 d0 10 00 Config index = 0x22 Card decodes 16 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x190 block length = 0x8 I/O address # 2: block start = 0x396 block length = 0x2 IRQ modes: Level IRQs: 4 5 11 13 14 Memory space length = 0x10 Tuple #6, code = 0x1b (Configuration entry), length = 15 000: 23 38 f0 61 a0 01 07 a6 03 01 30 68 d0 10 00 Config index = 0x23 Card decodes 16 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x1a0 block length = 0x8 I/O address # 2: block start = 0x3a6 block length = 0x2 IRQ modes: Level IRQs: 4 5 11 13 14 Memory space length = 0x10 Tuple #7, code = 0x14 (No link), length = 0 Tuple #8, code = 0xff (Terminator), length = 0 1 slots found this is what I have in /etc/pccard.conf card " " "NinjaATA-" config 0x23 "ata2" ? insert logger -t pccard:$device -s Sony Vaio CD-ROM Card inserted remove logger -t pccard:$device -s Sony Vaio CD-ROM Card removed this is the relevant entries in my kernel config file device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices this is the error message I get Apr 6 16:34:17 voyager pccardd[46]: driver allocation failed for (NinjaATA-): Device not configured What am I doing wrong? Regards, -oscar -- pgp public key: finger obonilla@fisicc-ufm.edu pgp fingerprint: 6D 18 8C 90 4C DF F0 4B DF 35 1F 69 A1 33 C7 BC To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message