From owner-freebsd-current@FreeBSD.ORG Mon Dec 29 08:40:14 2003 Return-Path: Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D652816A4CF for ; Mon, 29 Dec 2003 08:40:14 -0800 (PST) Received: from email07.aon.at (WARSL402PIP8.highway.telekom.at [195.3.96.97]) by mx1.FreeBSD.org (Postfix) with SMTP id 046B943D1F for ; Mon, 29 Dec 2003 08:40:04 -0800 (PST) (envelope-from shoesoft@gmx.net) Received: (qmail 369286 invoked from network); 29 Dec 2003 16:40:01 -0000 Received: from m089p025.dipool.highway.telekom.at (HELO ?62.46.1.25?) ([62.46.1.25]) (envelope-sender ) by 172.18.5.236 (qmail-ldap-1.03) with SMTP for ; 29 Dec 2003 16:40:01 -0000 From: Stefan Ehmann To: Scott Long In-Reply-To: <3FF04F28.5000306@freebsd.org> References: <1072618904.757.12.camel@shoeserv.freebsd> <3FF04F28.5000306@freebsd.org> Content-Type: text/plain Message-Id: <1072716010.683.5.camel@shoeserv.freebsd> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.4.5 Date: Mon, 29 Dec 2003 17:40:11 +0100 Content-Transfer-Encoding: 7bit cc: current@freebsd.org Subject: Re: page fault panic tracked down (selwakeuppri()) X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 Dec 2003 16:40:15 -0000 On Mon, 2003-12-29 at 16:58, Scott Long wrote: > Stefan Ehmann wrote: > > Some weeks ago I posted about a panic in 5.2-BETA. > > > > After accessing a read-only ext2fs for some hours I got a "page fault" > > panic (or rarely a "getblk: size(7537385) > MAXBSIZE(65536)"). The > > backtrace was always somewhat different. You can read about it a bit > > more detailed here: > > > > http://lists.freebsd.org/pipermail/freebsd-current/2003-November/015405.html > > > > After lots of buildworld and buildkernel I finally was able to detect > > the commit that caused this panic. > > > > Current from 2003.11.09.09.00.00 runs fine for > 10 hours. Current from > > 2003.11.09.09.20.00 crashed twice within less than 2 hours. > > > > The only src/sys commit in that time is > > http://lists.freebsd.org/pipermail/cvs-src/2003-November/013515.html > > where selwakeup()s is replaced with selwakeuppri(). > > > > So the problem must be somewhere in selwakeuppri(). > > > > I hope this can be resolved now. > > > > Thanks for tracking this down! Just for completeness, can you send > a verbose dmesg? The ext2fs is listed as /dev/ad1s1 /mnt/stuff ext2fs ro,noauto in /etc/fstab (if you wonder why it can't be spotted in dmesg) Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #57: Mon Dec 29 14:14:38 CET 2003 Shoe@shoeserv.freebsd:/usr/obj/usr/src/sys/SHOE Preloaded elf kernel "/boot/kernel/kernel" at 0xc083d000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc083d20c. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc083d2b8. Preloaded elf module "/boot/kernel/snd_csa.ko" at 0xc083d364. Preloaded elf module "/boot/kernel/bktr.ko" at 0xc083d410. Preloaded elf module "/boot/kernel/bktr_mem.ko" at 0xc083d4bc. Calibrating clock(s) ... i8254 clock: 1193199 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 651483559 Hz CPU: Intel Pentium III (651.48-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x387f9ff real memory = 402587648 (383 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x0000000017909fff, 382615552 bytes (93412 pages) avail memory = 381362176 (363 MB) bios32: Found BIOS32 Service Directory header at 0xc00fad40 bios32: Entry = 0xfb240 (c00fb240) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xb270 pnpbios: Found PnP BIOS data at 0xc00fbf80 pnpbios: Entry = f0000:bfa8 Rev = 1.0 Other BIOS signatures found: bktr_mem: memory holder loaded null: random: mem: Pentium Pro MTRR support enabled acpi0: on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106) pcibios: BIOS version 2.10 Using $PIR table, 7 entries at 0xc00fde60 PCI-Only Interrupts: 5 10 11 12 Location Bus Device Pin Link IRQs slot 1 0 9 A 0x01 3 4 5 7 9 10 11 12 14 15 slot 1 0 9 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 1 0 9 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 1 0 9 D 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 0 10 A 0x02 3 4 5 7 9 10 11 12 14 15 slot 2 0 10 B 0x03 3 4 5 7 9 10 11 12 14 15 slot 2 0 10 C 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 0 10 D 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 11 A 0x03 3 4 5 7 9 10 11 12 14 15 slot 3 0 11 B 0x05 3 4 5 7 9 10 11 12 14 15 slot 3 0 11 C 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 11 D 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 12 A 0x05 3 4 5 7 9 10 11 12 14 15 slot 4 0 12 B 0x01 3 4 5 7 9 10 11 12 14 15 slot 4 0 12 C 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 12 D 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 13 A 0x05 3 4 5 7 9 10 11 12 14 15 slot 5 0 13 B 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 13 C 0x02 3 4 5 7 9 10 11 12 14 15 slot 5 0 13 D 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15 embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi0: Power Button (fixed) ACPI timer looks GOOD min = 1, max = 3, width = 2 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 3, width = 2 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 3, width = 2 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC0._CRS] (Node 0xc3a32620), AE_AML_UNINITIALIZED_LOCAL ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC0._CRS] (Node 0xc3a32620), AE_AML_UNINITIALIZED_LOCAL can't fetch resources for \\_SB_.PCI0.ISA_.FDC0 - AE_AML_UNINITIALIZED_LOCAL acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_cpu0: on acpi0 acpi_button0: on acpi0 pcib0: port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.PCI0.ISA_.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.0 \\_SB_.PCI0.ISA_.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.1 \\_SB_.PCI0.ISA_.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.2 \\_SB_.PCI0.ISA_.LNKD irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.3 \\_SB_.PCI0.ISA_.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.0 \\_SB_.PCI0.ISA_.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.1 \\_SB_.PCI0.ISA_.LNKD irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.2 \\_SB_.PCI0.ISA_.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.3 \\_SB_.PCI0.ISA_.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.0 \\_SB_.PCI0.ISA_.LNKD irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.1 \\_SB_.PCI0.ISA_.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.2 \\_SB_.PCI0.ISA_.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.3 \\_SB_.PCI0.ISA_.LNKD irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.0 \\_SB_.PCI0.ISA_.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.1 \\_SB_.PCI0.ISA_.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.2 \\_SB_.PCI0.ISA_.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.3 \\_SB_.PCI0.ISA_.LNKD irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.0 \\_SB_.PCI0.ISA_.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.1 \\_SB_.PCI0.ISA_.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.2 \\_SB_.PCI0.ISA_.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.3 \\_SB_.PCI0.ISA_.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.0 \\_SB_.PCI0.ISA_.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.1 \\_SB_.PCI0.ISA_.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.2 \\_SB_.PCI0.ISA_.LNKD irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.3 \\_SB_.PCI0.ISA_.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.0 \\_SB_.PCI0.ISA_.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.1 \\_SB_.PCI0.ISA_.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.2 \\_SB_.PCI0.ISA_.LNKD irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.3 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.ISA_.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.0 \\_SB_.PCI0.ISA_.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.1 \\_SB_.PCI0.ISA_.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.2 \\_SB_.PCI0.ISA_.LNKD irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.3 \\_SB_.PCI0.ISA_.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.0 \\_SB_.PCI0.ISA_.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.1 \\_SB_.PCI0.ISA_.LNKD irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.2 \\_SB_.PCI0.ISA_.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.3 \\_SB_.PCI0.ISA_.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.0 \\_SB_.PCI0.ISA_.LNKD irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.1 \\_SB_.PCI0.ISA_.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.2 \\_SB_.PCI0.ISA_.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.3 \\_SB_.PCI0.ISA_.LNKD irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.0 \\_SB_.PCI0.ISA_.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.1 \\_SB_.PCI0.ISA_.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.2 \\_SB_.PCI0.ISA_.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.3 \\_SB_.PCI0.ISA_.LNKD irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.0 \\_SB_.PCI0.ISA_.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.1 \\_SB_.PCI0.ISA_.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.2 \\_SB_.PCI0.ISA_.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.3 \\_SB_.PCI0.ISA_.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.0 \\_SB_.PCI0.ISA_.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.1 \\_SB_.PCI0.ISA_.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.2 \\_SB_.PCI0.ISA_.LNKD irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.3 \\_SB_.PCI0.ISA_.LNKA irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.0 \\_SB_.PCI0.ISA_.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.1 \\_SB_.PCI0.ISA_.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.2 \\_SB_.PCI0.ISA_.LNKD irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.3 pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base d8000000, size 26, enabled found-> vendor=0x1106, dev=0x0691, revid=0x44 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x8598, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x0596, revid=0x23 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000e000, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x10 bus=0, slot=7, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000e400, size 5, enabled pcib0: matched entry for 0.7.INTD (source \\_SB_.PCI0.ISA_.LNKD) pcib0: slot 7 INTD is routed to irq 10 found-> vendor=0x1106, dev=0x3038, revid=0x11 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x3050, revid=0x30 bus=0, slot=7, func=3 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base df100000, size 5, enabled map[14]: type 4, range 32, base 0000e800, size 5, enabled pcib0: matched entry for 0.9.INTA (source \\_SB_.PCI0.ISA_.LNKA) pcib0: slot 9 INTA is routed to irq 11 found-> vendor=0x1244, dev=0x0a00, revid=0x02 bus=0, slot=9, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 4, range 32, base 0000ec00, size 8, enabled map[14]: type 1, range 32, base df102000, size 8, enabled pcib0: matched entry for 0.10.INTA (source \\_SB_.PCI0.ISA_.LNKB) pcib0: slot 10 INTA is routed to irq 12 found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=0, slot=10, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=12 map[10]: type 1, range 32, base df101000, size 12, enabled map[14]: type 1, range 32, base df000000, size 20, enabled pcib0: matched entry for 0.11.INTA (source \\_SB_.PCI0.ISA_.LNKC) pcib0: slot 11 INTA is routed to irq 5 found-> vendor=0x1013, dev=0x6003, revid=0x01 bus=0, slot=11, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x18 (6000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base df103000, size 12, enabled pcib0: matched entry for 0.12.INTA (source \\_SB_.PCI0.ISA_.LNKD) pcib0: slot 12 INTA is routed to irq 10 found-> vendor=0x109e, dev=0x036e, revid=0x11 bus=0, slot=12, func=0 class=04-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 3, range 32, base df104000, size 12, enabled pcib0: matched entry for 0.12.INTA (source \\_SB_.PCI0.ISA_.LNKD) pcib0: slot 12 INTA is routed to irq 10 found-> vendor=0x109e, dev=0x0878, revid=0x11 bus=0, slot=12, func=1 class=04-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 agp0: mem 0xd8000000-0xdbffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 256M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xdc000000-0xddffffff pcib1: prefetched decode 0xd0000000-0xd7ffffff pci1: on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base dc000000, size 24, enabled map[14]: type 3, range 32, base d0000000, size 27, enabled pcib0: matched entry for 0.1.INTA (source \\_SB_.PCI0.ISA_.LNKA) pcib0: slot 1 INTA is routed to irq 11 pcib1: slot 0 INTA is routed to irq 11 found-> vendor=0x10de, dev=0x0111, revid=0xb2 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 pci1: at device 0.0 (no driver attached) isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xe000-0xe00f at device 7.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1-master: stat=0xd0 err=0x00 lsb=0x0e msb=0x00 ata1-slave: stat=0xd0 err=0x00 lsb=0x0e msb=0x00 ata1-master: stat=0xd0 err=0x00 lsb=0x0e msb=0x00 ata1-slave: stat=0xd0 err=0x00 lsb=0x0e msb=0x00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x10 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 mask=03 stat0=00 stat1=10 devices=0xc ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: port 0xe400-0xe41f irq 10 at device 7.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Microsoft Microsoft IntelliMouse\M-. Optical, rev 1.10/1.08, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. pci0: at device 7.3 (no driver attached) ifpi0: port 0xe800-0xe81f mem 0xdf100000-0xdf10001f irq 11 at device 9.0 on pci0 ifpi0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2) ifpi0: passive stack unit 0 rl0: port 0xec00-0xecff mem 0xdf102000-0xdf1020ff irq 12 at device 10.0 on pci0 rl0: Ethernet address: 00:50:fc:1e:52:9f miibus0: on rl0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached csa0: mem 0xdf000000-0xdf0fffff,0xdf101000-0xdf101fff irq 5 at device 11.0 on pci0 csa: card is Turtle Beach Santa Cruz pcm0: on csa0 pcm0: pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Crystal Semi 3D Stereo Enhancement pcm0: Primary codec extended features AMAP pcm0: sndbuf_setmap 25c000, 1000; 0xc3a68000 -> 25c000 pcm0: sndbuf_setmap 25a000, 1000; 0xc3a66000 -> 25a000 bktr0: mem 0xdf103000-0xdf103fff irq 10 at device 12.0 on pci0 brooktree0: PCI bus latency is 64. bktr0: buffer size 3555328, addr 0x5000000 bktr0: GPIO is 0x00449fff bktr0: Card has no configuration EEPROM. Cannot determine card make. bktr0: card signature: 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00 bktr0: IMS TV Turbo, Philips FR1236 NTSC FM tuner. pci0: at device 12.1 (no driver attached) unknown: not probed (disabled) unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: on ppc0 ppbus0: IEEE1284 device found /NIBBLE/ECP/NIBBLE_ID/ECP_ID/Extensibility Link Probing for PnP devices on ppbus0: ppbus0: PRINTER PCLXL,PostScript Emulation,PCL5E,PJL lpt0: on ppbus0 lpt0: Interrupt-driven port unknown: not probed (disabled) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) npx0: [FAST] npx0: on motherboard npx0: INT 16 interface ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0 sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 651483559 Hz quality 800 Timecounters tick every 1.000 msec i4bctl: ISDN system control port attached DUMMYNET initialized (011031) ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging unlimited i4b: ISDN call control device attached i4btrc: 2 ISDN trace device(s) attached i4brbch: 2 raw B channel access device(s) attached Linux ELF exec handler installed lo0: bpf attached ata1: spurious interrupt - status=0x10 error=0x01 acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ad0: setting UDMA66 on VIA 82C596B chip GEOM: create disk ad0 dp=0xc3af7270 ad0: ATA-5 disk at ata0-master ad0: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA66 GEOM: new disk ad0 [0] f:80 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:36210447 [1] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/254/63 s:36210510 l:25157790 [2] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/254/63 s:61368300 l:58733640 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 18539748864 end 18539781119 GEOM: Configure ad0s2, start 18539781120 length 12880788480 end 31420569599 GEOM: Configure ad0s3, start 31420569600 length 30071623680 end 61492193279 ad1: setting UDMA66 on VIA 82C596B chip GEOM: create disk ad1 dp=0xc3af7070 ad1: ATA-5 disk at ata0-slave ad1: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA66 ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata1-master: pio=0x0b wdma=0x21 udma=0xffffffff cable=40pin acd0: setting WDMA1 on VIA 82C596B chip acd0: CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 689KB/s (689KB/s), 2048KB buffer, WDMA1 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: CDR, CDRW, test write acd0: Audio: play, 2 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s2b, start 268435456 length 783785984 end 1052221439 GEOM: Configure ad0s2c, start 0 length 12880788480 end 12880788479 GEOM: Configure ad0s2d, start 1052221440 length 268435456 end 1320656895 GEOM: Configure ad0s2e, start 1320656896 length 268435456 end 1589092351 GEOM: Configure ad0s2f, start 1589092352 length 11291696128 end 12880788479 acd1: setting UDMA33 on VIA 82C596B chip acd1: DVDROM drive at ata1 as slave acd1: 512KB buffer, UDMA33 acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, packet acd1: Writes: acd1: Audio: play, 255 volume levels acd1: Mechanism: ejectable tray, unlocked acd1: Medium: no/blank disc GEOM: Configure ad0s3c, start 0 length 30071623680 end 30071623679 GEOM: new disk ad1 [0] f:00 typ:131 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:78156162 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad1s1, start 32256 length 40015954944 end 40015987199 (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe3:ata1:0:1:0): Retrying Command (probe3:ata1:0:1:0): error 22 (probe3:ata1:0:1:0): Unretryable Error (probe3:ata1:0:1:0): Retrying Command (probe3:ata1:0:1:0): error 22 (probe3:ata1:0:1:0): Unretryable Error pass0 at ata1 bus 0 target 0 lun 0 pass0: Removable CD-ROM SCSI-0 device pass0: Serial Number [ pass0: 3.300MB/s transfers pass1 at ata1 bus 0 target 1 lun 0 pass1: Removable CD-ROM SCSI-0 device pass1: 33.000MB/s transfers pass0 at ata1 bus 0 target 0 lun 0 pass0: Removable CD-ROM SCSI-0 device pass0: Serial Number [ pass0: 3.300MB/s transfers pass1 at ata1 bus 0 target 1 lun 0 pass1: Removable CD-ROM SCSI-0 device pass1: 33.000MB/s transfers Mounting root from ufs:/dev/ad0s2a start_init: trying /sbin/init Loading configuration files. Entropy harvesting: interrupts ethernet point_to_point . kernel dumps on /dev/ad0s2b swapon: adding /dev/ad0s2b as swap device Starting file system checks: /dev/ad0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s2a: clean, 96656 free (544 frags, 12014 blocks, 0.4% fragmentation) /dev/ad0s2e: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s2e: clean, 118024 free (152 frags, 14734 blocks, 0.1% fragmentation) /dev/ad0s2f: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s2f: clean, 1127453 free (105709 frags, 127718 blocks, 1.9% fragmentation) /dev/ad0s2d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s2d: clean, 76618 free (1650 frags, 9371 blocks, 1.3% fragmentation) /dev/ad0s3c: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3c: clean, 1257014 free (886 frags, 157016 blocks, 0.0% fragmentation) Setting hostname: shoeserv.freebsd. rl0: flags=8843 mtu 1500 options=8 inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255 inet6 fe80::250:fcff:fe1e:529f%rl0 prefixlen 64 tentative scopeid 0x1 ether 00:50:fc:1e:52:9f media: Ethernet autoselect (none) status: no carrier lo0: flags=8049 mtu 16384 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 ISDN subsystem setup: isdnd . Flushed all rules. Firewall rules loaded, starting divert daemons: natd . net.inet.ip.fw.enable: 1 -> 1 Additional routing options: IP gateway=YES . hw.bus.devctl_disable: 0 -> 1 Mounting NFS file systems: . Starting syslogd. Dec 29 17:22:36 syslogd: /var/log/debug.log: No such file or directory Dec 29 17:22:36 shoeserv syslogd: kernel boot file is /boot/kernel/kernel Checking for core dump... savecore: no dumps found Starting rpcbind. NFS access cache time=2 ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout Starting mountd. Starting nfsd. Starting usbd. Starting local daemons: hw.snd.pcm0.vchans: 0 -> 4 hw.bt848.card: -1 -> 10 lpt0: switched to polled extended mode Dec 29 17:22:38 shoeserv kernel: lpt0: switched to polled extended mode Working in auto mode tun0: bpf attached Using interface: tun0 Warning: No default entry found in config file. . Updating motd . i4b: unit 0, assigned TEI = 117 = 0x75 Configuring syscons: keymap scrnmap blanktime . Dec 29 17:22:39 shoeserv kernel: i4b: unit 0, assigned TEI = 117 = 0x75 Starting sshd. i4b-L3 T303_timeout: SETUP not answered, cr = 79 i4b-L3 next_l3state: FSM illegal state, state = ST_U0 - Null, event = EV_T303EXP - T303 timeout! Initial i386 initialization: . Additional ABI support: . Starting cron. Local package initialization: pgsql cups: started scheduler. ddclient Internet Software Consortium DHCP Server V3.0.1rc12 Copyright 1995-2003 Internet Software Consortium. All rights reserved. For info, please visit http://www.isc.org/products/DHCP Wrote 0 deleted host decls to leases file. Wrote 0 new dynamic host decls to leases file. Wrote 9 leases to leases file. Listening on BPF/rl0/00:50:fc:1e:52:9f/192.168.0.0/24 Sending on BPF/rl0/00:50:fc:1e:52:9f/192.168.0.0/24 Sending on Socket/fallback/fallback-net dhcpd Samba . Additional TCP options: . Starting background file system checks in 60 seconds. Mon Dec 29 17:23:03 CET 2003 Dec 29 17:23:42 shoeserv login: ROOT LOGIN (root) ON ttyv0