From owner-freebsd-questions Mon Feb 12 15:51:03 1996 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id PAA14237 for questions-outgoing; Mon, 12 Feb 1996 15:51:03 -0800 (PST) Received: from quackerjack.cc.vt.edu (quackerjack.cc.vt.edu [198.82.160.250]) by freefall.freebsd.org (8.7.3/8.7.3) with ESMTP id PAA14231 for ; Mon, 12 Feb 1996 15:51:01 -0800 (PST) Received: from sable.cc.vt.edu (sable.cc.vt.edu [128.173.16.30]) by quackerjack.cc.vt.edu (8.7.1/8.7.1) with SMTP id SAA18366 for ; Mon, 12 Feb 1996 18:50:57 -0500 (EST) Received: from eholmber.async.vt.edu (eholmber.async.vt.edu [128.173.17.219]) by sable.cc.vt.edu (8.6.12/8.6.12) with SMTP id SAA29670 for ; Mon, 12 Feb 1996 18:50:56 -0500 Message-ID: <311FFC51.E6@vt.edu> Date: Mon, 12 Feb 1996 18:49:53 -0800 From: Eric Holmberg X-Mailer: Mozilla 2.0 (Win16; I) MIME-Version: 1.0 To: questions@freebsd.org Subject: IWill Pentium Motherboard w/ Adaptec 2940 X-URL: http://www.freebsd.org/support.html Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@freebsd.org Precedence: bulk Does anybody else have any problems with the 7850 chip used on the IWill motherboards? I cannot get the system to boot. Once the boot floppy scans the controller and gets a list of the devices, it begins to read from the hard drive. As soon as this starts, the system locks after printing: ahc_intr: referenced scb not valid during seq int 0x71 scb(0) no active SCB for reconnecting target issuing Abort That code was from the boot.flp for a 2.2 (I think) snap. Any ideas as to what the problem is? I have only two SCSI devices connected when this happens (2 1-Gig HD's) and they are properly terminated and I have replaced the cables 5 times. Thanks. --Eric ohms@vt.edu