From owner-freebsd-ports Tue Feb 10 22:40:03 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id WAA03261 for freebsd-ports-outgoing; Tue, 10 Feb 1998 22:40:03 -0800 (PST) (envelope-from owner-freebsd-ports@FreeBSD.ORG) Received: (from gnats@localhost) by hub.freebsd.org (8.8.8/8.8.8) id WAA03234; Tue, 10 Feb 1998 22:40:01 -0800 (PST) (envelope-from gnats) Received: (from nobody@localhost) by hub.freebsd.org (8.8.8/8.8.8) id WAA02791; Tue, 10 Feb 1998 22:37:30 -0800 (PST) (envelope-from nobody) Message-Id: <199802110637.WAA02791@hub.freebsd.org> Date: Tue, 10 Feb 1998 22:37:30 -0800 (PST) From: giffunip@asme.org To: freebsd-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: www-1.0 Subject: ports/5719: Update to the URT port Sender: owner-freebsd-ports@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >Number: 5719 >Category: ports >Synopsis: Update to the URT port >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Quarter: >Keywords: >Date-Required: >Class: change-request >Submitter-Id: current-users >Arrival-Date: Tue Feb 10 22:40:00 PST 1998 >Last-Modified: >Originator: Pedro F. Giffuni >Organization: U. Nacional de Colombia >Release: 2.2.5-R >Environment: >Description: Previous built procedure was horrible and didn't permit any work done on the port. This version builds correctly, and fixes minor details. >How-To-Repeat: >Fix: diff -rNu /cdrom/ports/graphics/urt/Makefile urt/Makefile --- /cdrom/ports/graphics/urt/Makefile Fri Jun 6 00:31:56 1997 +++ urt/Makefile Tue Feb 10 23:47:52 1998 @@ -7,30 +7,68 @@ # DISTNAME= urt -PKGNAME= urt-3.1b +PKGNAME= urt-3.1b1 CATEGORIES= graphics MASTER_SITES= ftp://ftp.cs.utah.edu/pub/ DISTFILES= urt-3.1b.tar.Z urt-doc.tar urt-img.tar -MAINTAINER= pgiffuni@fps.biblos.unal.edu.co +MAINTAINER= giffunip@asme.org + +EXTRACT_ONLY= urt-3.1b.tar.Z +PATCH_SITES= ftp://ptolemy.berkeley.edu/pub/misc/urt/ +PATCHFILES= urt-3.1b-3.1b1.patch +PATCH_DIST_STRIP=-p1 LIB_DEPENDS= tiff\\.3\\.:${PORTSDIR}/graphics/tiff BUILD_DEPENDS= ${X11BASE}/lib/libpbm.a:${PORTSDIR}/graphics/netpbm NO_WRKSUBDIR= yes -EXTRACT_ONLY= urt-3.1b.tar.Z +CONFIGURE_SCRIPT=Configure +CONFIGURE_ARGS= config/urt +HAS_CONFIGURE= yes +MAKEFILE= makefile +ALL_TARGET= + +MAN1= aliastorle.1 applymap.1 avg4.1 crop.1 cubitorle.1 dvirle.1 \ + fant.1 getx11.1 giftorle.1 graytorle.1 into.1 mcut.1 \ + mergechan.1 painttorle.1 pgmtorle.1 pyrmask.1 rawtorle.1 \ + repos.1 rlatorle.1 rleClock.1 rleaddcom.1 rleaddeof.1 rlebg.1 \ + rlebox.1 rlecat.1 rleccube.1 rlecomp.1 rledither.1 rleflip.1 \ + rlegrid.1 rlehdr.1 rlehisto.1 rleinterp.1 rleldmap.1 rlemandl.1 \ + rlenoise.1 rlepatch.1 rleprint.1 rlequant.1 rlescale.1 \ + rleselect.1 rlesetbg.1 rlespiff.1 rlesplice.1 rlesplit.1 \ + rlestereo.1 rleswap.1 rletoabA60.1 rletoabA62.1 rletoalias.1 \ + rletoascii.1 rletogif.1 rletogray.1 rletopaint.1 rletoppm.1 \ + rletops.1 rletoraw.1 rletorla.1 rletotarga.1 rletotiff.1 \ + rlezoom.1 smush.1 targatorle.1 tifftorle.1 to8.1 tobw.1 unexp.1 \ + unslice.1 urt.1 wasatchrle.1 +MAN3= buildmap.3 bwdithermap.3 colorquant.3 dither.3 ditherbw.3 \ + dithergb.3 dithermap.3 float_to_exp.3 hilbert.3 hilbert_c2i.3 \ + hilbert_i2c.3 inv_cmap.3 librle.3 make_square.3 rgb_to_bw.3 \ + rle_addhist.3 rle_cp.3 rle_debug.3 rle_delcom.3 rle_freeraw.3 \ + rle_get_error.3 rle_get_set.3 rle_get_setup.3 \ + rle_get_setup_ok.3 rle_getcom.3 rle_getraw.3 rle_getrow.3 \ + rle_getskip.3 rle_hdr.3 rle_op.3 rle_open_f.3 \ + rle_open_f_noexit.3 rle_put_init.3 rle_put_setup.3 rle_putcom.3 \ + rle_puteof.3 rle_putraw.3 rle_putrow.3 rle_raw_alloc.3 \ + rle_raw_free.3 rle_rawtorow.3 rle_row_alloc.3 rle_row_free.3 \ + rle_skiprow.3 +#Note: Don't compress man5, it won't work ! post-install: - ${MKDIR} ${PREFIX}/share/doc/urt - cd ${PREFIX}/share/doc/urt; \ - tar xf $(DISTDIR)/urt-doc.tar; \ - cd doc; \ - find -d . | cpio -dump ..; \ - cd ..; \ - rm -rf doc; \ - tar xf $(DISTDIR)/urt-img.tar; \ - chown -R root:wheel . ; \ - find . -type d -exec chmod 775 '{}' \; ; \ - find . -type f -exec chmod 664 '{}' \; +.if !defined(NOPORTDOCS) + ${MKDIR} ${PREFIX}/share/doc/urt ${PREFIX}/share/examples/urt + cd ${PREFIX}/share/doc/urt; \ + ${EXTRACT_CMD} xf $(DISTDIR)/urt-doc.tar; \ + cd doc; \ + find -d . | cpio -dump ..; \ + cd ..; \ + ${RM} -rf doc; \ + cd ${PREFIX}/share/examples/urt; \ + ${EXTRACT_CMD} xf $(DISTDIR)/urt-img.tar; \ + chown -R root:wheel . ; \ + find . -type d -exec chmod 775 '{}' \; ; \ + find . -type f -exec chmod 664 '{}' \; +.endif .include diff -rNu /cdrom/ports/graphics/urt/files/md5 urt/files/md5 --- /cdrom/ports/graphics/urt/files/md5 Tue Jun 3 18:41:07 1997 +++ urt/files/md5 Mon Jan 5 18:40:37 1998 @@ -1,3 +1,4 @@ MD5 (urt-3.1b.tar.Z) = c9a377284d00c102c1a8af53d95a6b39 MD5 (urt-doc.tar) = cc547e9b7ed77196e14c9897b1655ead MD5 (urt-img.tar) = 7ef7a295350dd2fa7d5aa580545f9ba4 +MD5 (urt-3.1b-3.1b1.patch) = ff90c5d85cda7736536a5db67f216be7 diff -rNu /cdrom/ports/graphics/urt/patches/patch-aa urt/patches/patch-aa --- /cdrom/ports/graphics/urt/patches/patch-aa Tue Jun 3 18:41:07 1997 +++ urt/patches/patch-aa Wed Feb 11 01:02:14 1998 @@ -1,6 +1,5 @@ -diff -ur ../urt-3.1b-orig/config/urt ./config/urt ---- ../urt-3.1b-orig/config/urt Wed Jul 15 15:47:15 1992 -+++ ./config/urt Sat Sep 16 23:00:11 1995 +--- config/urt.orig Wed Jul 15 15:47:15 1992 ++++ config/urt Wed Feb 11 01:01:24 1998 @@ -1,3 +1,7 @@ +# Configuration for HP 9000/300 series running BSD4.3 + @@ -58,19 +57,23 @@ ##define FILE_NAME_14_CHARS If filenames are limited to 14 characters. ##define HAVE_CPROTO If you have the cproto command. Not normally required. ##define NEED_BSTRING Your libc does not have bcopy or bzero (Sys V probably) -@@ -92,16 +96,16 @@ +@@ -91,17 +95,17 @@ + ##define NO_TOOLS Don't build tool directory. ##define STDIO_NEEDS_BINARY Your fopen() needs "b" specified for binary io ##define USE_TIME_H You need to include time.h for time_t (Sys V) - ##define SYS_V_SETPGRP Your system has the SysV setpgrp() call. +-##define SYS_V_SETPGRP Your system has the SysV setpgrp() call. -##define USE_L_FLAG Use -Llibdir -lrle instead of libdir/liblre.a. -##define USE_PROTOTYPES Declare library functions with ANSI-C prototypes. -##define USE_RANDOM Your libc has the BSD random() function. ++#define SYS_V_SETPGRP Your system has the SysV setpgrp() call. +#define USE_L_FLAG Use -Llibdir -lrle instead of libdir/liblre.a. +#define USE_PROTOTYPES Declare library functions with ANSI-C prototypes. +#define USE_RANDOM Your libc has the BSD random() function. ##define USE_STDARG Use 'stdarg' instead of 'varargs' (ANSI). - ##define USE_STDLIB_H You have "stdlib.h". - ##define USE_UNISTD_H You have "unistd.h". +-##define USE_STDLIB_H You have "stdlib.h". +-##define USE_UNISTD_H You have "unistd.h". ++#define USE_STDLIB_H You have "stdlib.h". ++#define USE_UNISTD_H You have "unistd.h". ##define USE_STRING_H You have "string.h", not "strings.h" -##define VOID_STAR Your C compiler understands the 'void *' declaration. +#define VOID_STAR Your C compiler understands the 'void *' declaration. @@ -80,7 +83,7 @@ # DEST is where all programs will be put. Can be overridden for specific # directories below. -@@ -121,12 +125,14 @@ +@@ -121,12 +125,12 @@ # library, include files, or manual pages, respectively, to be # installed anywhere. @@ -90,18 +93,43 @@ -##defpath CNV_DEST -##defpath TOOLS_DEST -##defpath INC_DEST -+# This paths will be adapted (were? :-) by a configure script. -+ -+#defpath MAN_DEST FBSD_PREFIX/man -+#defpath LIB_DEST FBSD_PREFIX/lib -+#defpath GET_DEST FBSD_PREFIX/bin -+#defpath CNV_DEST FBSD_PREFIX/bin -+#defpath TOOLS_DEST FBSD_PREFIX/bin -+#defpath INC_DEST FBSD_PREFIX/include ++#defpath MAN_DEST /$(PREFIX)/man ++#defpath LIB_DEST /$(PREFIX)/lib ++#defpath GET_DEST /$(PREFIX)/bin ++#defpath CNV_DEST /$(PREFIX)/bin ++#defpath TOOLS_DEST /$(PREFIX)/bin ++#defpath INC_DEST /$(PREFIX)/include # Control of formatting. If your "roff" program needs to be piped to # something to print, set ROFFPIPE to (e.g.) "| lpr" -@@ -191,11 +197,10 @@ +@@ -145,9 +149,9 @@ + #ifdef CGM + # Path to directory where CGM library and include files may be found + # Absolute or relative to URT root +-#defpath CGMDIR +-INCCGM = -I$(CGMDIR) +-LIBCGM = $(CGMDIR)/libcgm.a ++#defpath CGMDIR $(LOCALBASE) ++INCCGM = -I$(CGMDIR)/include ++LIBCGM = $(CGMDIR)/lib/libcgm.a + #endif + + #ifdef CX3D +@@ -163,11 +167,11 @@ + # Where to find the MC-TeX include files. + INCMCTEX = h # Note! relative to cnv/tex directory + # where to find the font description file +-CONFFILE = /usr/local/lib/tex/fontdesc ++CONFFILE = $(LOCALBASE)/lib/tex/fontdesc + #endif + + #ifdef FB +-LIBFB = /usr/brl/lib/libfb.a ++LIBFB = $(X11BASE)/lib/brl/libfb.a + #endif + + #ifdef GRINNELL +@@ -191,11 +195,10 @@ #ifdef PBMPLUS # PBMDIR should refer to the root of your PBM source tree. # If relative, it's relative to root of URT source tree. @@ -111,12 +139,12 @@ -INCPBMPLUS = -I$(PBMDIR) -I$(PBMDIR)/ppm -I$(PBMDIR)/pgm -I$(PBMDIR)/pbm -LIBPBMPLUS = $(PBMDIR)/ppm/libppm.a $(PBMDIR)/pgm/libpgm.a \ - $(PBMDIR)/pbm/libpbm.a -+INCPBMPLUS = -I/usr/X11R6/include -+LIBPBMPLUS = -L/usr/X11R6/lib -lppm -lpgm -lpbm ++INCPBMPLUS = -I$(X11BASE)/include ++LIBPBMPLUS = -L$(X11BASE)/lib -lppm -lpgm -lpbm #endif #ifdef SUNRASTER|SUNTOOLS|TAAC1 -@@ -216,9 +221,9 @@ +@@ -216,9 +219,9 @@ #ifdef TIFF # Location of tiff library and include files. Relative to URT root directory. @@ -124,271 +152,17 @@ -INCTIFF = -I$(TIFFDIR) -LIBTIFF = $(TIFFDIR)/libtiff.a +##defpath TIFFDIR -+INCTIFF = -I/usr/local/include -+LIBTIFF = -L/usr/local/lib -ltiff ++INCTIFF = -I$(LOCALBASE)/include ++LIBTIFF = -L$(LOCALBASE)/lib -ltiff #endif #ifdef X10 -@@ -227,6 +232,6 @@ +@@ -227,6 +230,6 @@ #endif #ifdef X11 -LIBX11 = -lX11 -INCX11 = -+LIBX11 = -L/usr/X11R6/lib -lX11 -+INCX11 = -I/usr/X11R6/include - #endif -diff -ur ../urt-3.1b-orig/get/getx11/in_cmap.c ./get/getx11/in_cmap.c ---- ../urt-3.1b-orig/get/getx11/in_cmap.c Thu Apr 30 10:17:16 1992 -+++ ./get/getx11/in_cmap.c Sat Sep 16 11:16:59 1995 -@@ -70,10 +70,10 @@ - if ( img->sep_colors || - (img->img_channels == 1 && img->ncmap == 3 && img->cmlen) ) - /* If using color map directly, apply display gamma, too. */ -- img->in_cmap = buildmap( img_hdr, 3, img->gamma, -+ img->in_cmap = buildmap( img_hdr, 3, (double) img->gamma, - display_gamma ); - else -- img->in_cmap = buildmap( img_hdr, 3, img->gamma, 1.0 ); -+ img->in_cmap = buildmap( img_hdr, 3, (double) img->gamma, 1.0 ); - - for (i = 0; i < 3; i++ ) { - for (j = 0; j < 256; j++) -diff -ur ../urt-3.1b-orig/include/rle_config.tlr ./include/rle_config.tlr ---- ../urt-3.1b-orig/include/rle_config.tlr Thu Apr 30 10:06:23 1992 -+++ ./include/rle_config.tlr Sat Sep 16 11:31:57 1995 -@@ -48,7 +48,7 @@ - #endif /* NO_DECLARE_MALLOC */ - - #ifdef USE_PROTOTYPES --extern char *getenv( CONST_DECL char *name ); -+extern char *getenv( CONST_DECL char *CONST_DECL name); - #else - extern char *getenv(); - #endif -diff -ur ../urt-3.1b-orig/lib/buildmap.c ./lib/buildmap.c ---- ../urt-3.1b-orig/lib/buildmap.c Thu Feb 27 18:17:01 1992 -+++ ./lib/buildmap.c Sat Sep 16 12:11:12 1995 -@@ -26,6 +26,7 @@ - */ - - #include -+#include - #include "rle.h" - #include - -diff -ur ../urt-3.1b-orig/lib/makefile.src ./lib/makefile.src ---- ../urt-3.1b-orig/lib/makefile.src Wed Mar 4 16:32:53 1992 -+++ ./lib/makefile.src Sat Sep 16 10:44:35 1995 -@@ -26,7 +26,10 @@ - vaxshort.o \ - $(OPT_OBJS) - --LIBNAME = librle.a -+SOOBJS = $(OBJS:.o=.so) -+ -+LIBANAME = librle.a -+LIBSONAME = librle.so.1.0 - - # Just rebuild the object files. - objs: $(OBJS) -@@ -37,23 +40,13 @@ - # Do nothing if $(DEST) is empty (or not defined) - install: buildlib - @sh -c "if test '$(DEST)x' != x ; then \ -- echo cp $(LIBNAME) $(DEST)/$(LIBNAME) ; \ -- cp $(LIBNAME) $(DEST)/$(LIBNAME) ; \ -+ echo cp $(LIBANAME) $(DEST)/$(LIBANAME) ; \ -+ cp $(LIBANAME) $(DEST)/$(LIBANAME) ; \ -+ echo cp $(LIBSONAME) $(DEST)/$(LIBSONAME) ; \ -+ cp $(LIBSONAME) $(DEST)/$(LIBSONAME) ; \ - if test x$(RANLIB) != x ; then \ -- echo ranlib $(DEST)/$(LIBNAME) ; \ -- ranlib $(DEST)/$(LIBNAME) ; \ -- else \ -- true ; \ -- fi ; \ -- if test -d $(DEST)/debug ; then \ -- echo cp $(LIBNAME) $(DEST)/debug/$(LIBNAME) ; \ -- if test x$(RANLIB) != x ; then \ -- cp $(LIBNAME) $(DEST)/debug/$(LIBNAME) ; \ -- echo ranlib $(DEST)/debug/$(LIBNAME) ; \ -- else \ -- true ; \ -- fi ; \ -- ranlib $(DEST)/debug/$(LIBNAME) ; \ -+ echo ranlib $(DEST)/$(LIBANAME) ; \ -+ ranlib $(DEST)/$(LIBANAME) ; \ - else \ - true ; \ - fi ; \ -@@ -63,14 +56,24 @@ - touch install - - # Rebuild the library from all the .o files. --buildlib: $(OBJS) -- -rm -f $(LIBNAME) -- ar rc $(LIBNAME) -- ar q $(LIBNAME) $(OBJS) -+buildlib: $(LIBANAME) $(LIBSONAME) -+ -+$(LIBANAME): $(OBJS) -+ -rm -f $@ -+ ar rc $@ $? - #ifndef NO_RANLIB -- ranlib $(LIBNAME) -+ ranlib $@ ++LIBX11 = -L$(X11BASE)/lib -lX11 ++INCX11 = -I$(X11BASE)/include #endif -- touch buildlib -+ -+.SUFFIXES: .so .o -+ -+.c.so: -+ $(CC) -fPIC -DPIC $(CFLAGS) -c $*.c -o $*.so -+ $(LD) -X -r $*.so -+ -+$(LIBSONAME): $(SOOBJS) -+ -rm -f $@ -+ ld -Bshareable -o $@ $> - - # Clean up installed stuff and binaries - pristine: clean -@@ -86,9 +89,12 @@ - # Get rid of everything which must be recompiled on a different computer. - clean: - -rm -f *.o -+ -rm -f *.so - -@if test x$(DEST) != x ; then \ -- echo rm -f $(LIBNAME) ; \ -- rm -f $(LIBNAME) ; \ -+ echo rm -f $(LIBANAME) ; \ -+ rm -f $(LIBANAME) ; \ -+ echo rm -f $(LIBSONAME) ; \ -+ rm -f $(LIBSONAME) ; \ - else \ - true ; \ - fi -diff -ur ../urt-3.1b-orig/makefile.src ./makefile.src ---- ../urt-3.1b-orig/makefile.src Fri Jun 7 11:58:13 1991 -+++ ./makefile.src Fri Sep 15 22:09:01 1995 -@@ -17,7 +17,7 @@ - # clean deletes all but source, pristine (below) deletes installed stuff, too - default clean: doit - @for d in $(DIRS) ; do \ -- ( cd $$d ; echo make $@ on $$d ; make $(MFLAGS) $@ ) ; \ -+ ( cd $$d ; echo make $@ on $$d ; $(MAKE) $(MFLAGS) $@ ) ; \ - done - - # install puts library, binaries and documentation into global location -@@ -29,7 +29,7 @@ - - install $(MAKE_TARGET) pristine depend:: doit - @for d in $(ALLDIRS) ; do \ -- ( cd $$d ; echo make $@ on $$d ; make $(MFLAGS) $@ ) ; \ -+ ( cd $$d ; echo make $@ on $$d ; $(MAKE) $(MFLAGS) $@ ) ; \ - done - - -diff -ur ../urt-3.1b-orig/makefile.tlr ./makefile.tlr ---- ../urt-3.1b-orig/makefile.tlr Tue Aug 4 13:17:57 1992 -+++ ./makefile.tlr Sat Sep 16 10:35:58 1995 -@@ -7,7 +7,7 @@ - @sh -c "if test 'x$(DIRS)' != x ; then eval \ - 'set -e ; for dir in $(DIRS) ; do \ - (cd \$$dir ; echo Make ${HERE}\$$dir ; \ -- make $(MFLAGS) $(DIRMFLAGS) ) ; \ -+ $(MAKE) $(MFLAGS) $(DIRMFLAGS) ) ; \ - done' ; \ - else \ - true ; \ -@@ -46,7 +46,7 @@ - @sh -c "if test 'x$(DIRS)' != x ; then eval \ - 'for dir in $(DIRS) ; do \ - (cd \$$dir ; echo Install ${HERE}\$$dir ; \ -- make $(MFLAGS) $(DIRMFLAGS) install) ; \ -+ $(MAKE) $(MFLAGS) $(DIRMFLAGS) install) ; \ - done' ; \ - else \ - true ; \ -@@ -105,7 +105,7 @@ - 'for dir in $(ALLDIRS); do \ - if test -d $$dir ; then \ - (cd $$dir; echo Make ${HERE}$$dir pristine ; \ -- make $(MFLAGS) pristine); \ -+ $(MAKE) $(MFLAGS) pristine); \ - else \ - true; \ - fi; \ -@@ -124,7 +124,7 @@ - 'for dir in $(ALLDIRS); do \ - if test -d $$dir ; then \ - (cd $$dir; echo Clean ${HERE}$$dir ; \ -- make $(MFLAGS) clean); \ -+ $(MAKE) $(MFLAGS) clean); \ - else \ - true; \ - fi; \ -diff -ur ../urt-3.1b-orig/man/makefile.src ./man/makefile.src ---- ../urt-3.1b-orig/man/makefile.src Thu Feb 27 18:26:52 1992 -+++ ./man/makefile.src Sat Sep 16 13:51:29 1995 -@@ -216,9 +216,9 @@ - install-1: $(PAGES1) - @-sh -c "if test '$(DEST)X' != X ; then \ - for i in $? ; do \ -- dpgm=\`basename \$$i .1\`.$(SUFF1) ; \ -- echo cp \$$i $(DEST1)/\$$dpgm ; \ -- cp \$$i $(DEST1)/\$$dpgm ; \ -+ dpgm=$(DEST1)/\`basename \$$i .1\`.$(SUFF1) ; \ -+ echo cp \$$i \$$dpgm ';' gzip -9nf \$$dpgm ; \ -+ cp \$$i \$$dpgm ; gzip -9nf \$$dpgm ; \ - done ; \ - else \ - true ; \ -@@ -228,9 +228,9 @@ - install-3: $(PAGES3) - @-sh -c "if test '$(DEST)X' != X ; then \ - for i in $? ; do \ -- dpgm=${PAGE3_INSTALL_NAME} ; \ -- echo cp \$$i $(DEST3)/\$$dpgm ; \ -- cp \$$i $(DEST3)/\$$dpgm ; \ -+ dpgm=$(DEST3)/${PAGE3_INSTALL_NAME} ; \ -+ echo cp \$$i \$$dpgm ';' gzip -9nf \$$dpgm ; \ -+ cp \$$i \$$dpgm ; gzip -9nf \$$dpgm ;\ - done ; \ - else \ - true ; \ -diff -ur ../urt-3.1b-orig/tools/into.c ./tools/into.c ---- ../urt-3.1b-orig/tools/into.c Thu Apr 30 10:10:15 1992 -+++ ./tools/into.c Sat Sep 16 10:32:26 1995 -@@ -41,7 +41,10 @@ - short forceflg; /* overwrite an unwritable file? */ - - extern int errno; -+ -+#ifndef BSD - extern char *sys_errlist[]; -+#endif - - void - main(argc, argv) -diff -ur ../urt-3.1b-orig/tools/makefile.src ./tools/makefile.src ---- ../urt-3.1b-orig/tools/makefile.src Tue Jan 28 15:47:42 1992 -+++ ./tools/makefile.src Sat Sep 16 10:33:14 1995 -@@ -68,7 +68,7 @@ - fant.out: fant.o mallocNd.o - $(CC) $(CFLAGS) -I$(RI) fant.o mallocNd.o $(LIBS) -lm -o fant.new - mv fant.new fant.out -- -+ - # rlebox and crop use some common code. - rle_box.o: $(RI)/rle.h $(RI)/rle_config.h $(RI)/rle_raw.h - -@@ -82,7 +82,7 @@ - # rleClock has it's own directory, must be built special - - rleClock.out: clock/font.c clock/font.h clock/font.src clock/rleClock.c -- (cd clock ; make) -+ (cd clock ; $(MAKE)) - - # Incremental install, copies everything ("$?") since last install to DEST dir. - install: $(PGMS) install-pgm diff -rNu /cdrom/ports/graphics/urt/patches/patch-ab urt/patches/patch-ab --- /cdrom/ports/graphics/urt/patches/patch-ab Wed Dec 31 19:00:00 1969 +++ urt/patches/patch-ab Tue Feb 10 14:48:42 1998 @@ -0,0 +1,226 @@ +diff -ur ../urt-3.1b-orig/get/getx11/in_cmap.c ./get/getx11/in_cmap.c +--- ../urt-3.1b-orig/get/getx11/in_cmap.c Thu Apr 30 10:17:16 1992 ++++ ./get/getx11/in_cmap.c Sat Sep 16 11:16:59 1995 +@@ -70,10 +70,10 @@ + if ( img->sep_colors || + (img->img_channels == 1 && img->ncmap == 3 && img->cmlen) ) + /* If using color map directly, apply display gamma, too. */ +- img->in_cmap = buildmap( img_hdr, 3, img->gamma, ++ img->in_cmap = buildmap( img_hdr, 3, (double) img->gamma, + display_gamma ); + else +- img->in_cmap = buildmap( img_hdr, 3, img->gamma, 1.0 ); ++ img->in_cmap = buildmap( img_hdr, 3, (double) img->gamma, 1.0 ); + + for (i = 0; i < 3; i++ ) { + for (j = 0; j < 256; j++) +diff -ur ../urt-3.1b-orig/include/rle_config.tlr ./include/rle_config.tlr +--- ../urt-3.1b-orig/include/rle_config.tlr Thu Apr 30 10:06:23 1992 ++++ ./include/rle_config.tlr Sat Sep 16 11:31:57 1995 +@@ -48,7 +48,7 @@ + #endif /* NO_DECLARE_MALLOC */ + + #ifdef USE_PROTOTYPES +-extern char *getenv( CONST_DECL char *name ); ++extern char *getenv( CONST_DECL char *CONST_DECL name); + #else + extern char *getenv(); + #endif +diff -ur ../urt-3.1b-orig/lib/buildmap.c ./lib/buildmap.c +--- ../urt-3.1b-orig/lib/buildmap.c Thu Feb 27 18:17:01 1992 ++++ ./lib/buildmap.c Sat Sep 16 12:11:12 1995 +@@ -26,6 +26,7 @@ + */ + + #include ++#include + #include "rle.h" + #include + +diff -ur ../urt-3.1b-orig/lib/makefile.src ./lib/makefile.src +--- ../urt-3.1b-orig/lib/makefile.src Wed Mar 4 16:32:53 1992 ++++ ./lib/makefile.src Sat Sep 16 10:44:35 1995 +@@ -26,7 +26,10 @@ + vaxshort.o \ + $(OPT_OBJS) + +-LIBNAME = librle.a ++SOOBJS = $(OBJS:.o=.so) ++ ++LIBANAME = librle.a ++LIBSONAME = librle.so.1.0 + + # Just rebuild the object files. + objs: $(OBJS) +@@ -37,23 +40,13 @@ + # Do nothing if $(DEST) is empty (or not defined) + install: buildlib + @sh -c "if test '$(DEST)x' != x ; then \ +- echo cp $(LIBNAME) $(DEST)/$(LIBNAME) ; \ +- cp $(LIBNAME) $(DEST)/$(LIBNAME) ; \ ++ echo cp $(LIBANAME) $(DEST)/$(LIBANAME) ; \ ++ cp $(LIBANAME) $(DEST)/$(LIBANAME) ; \ ++ echo cp $(LIBSONAME) $(DEST)/$(LIBSONAME) ; \ ++ cp $(LIBSONAME) $(DEST)/$(LIBSONAME) ; \ + if test x$(RANLIB) != x ; then \ +- echo ranlib $(DEST)/$(LIBNAME) ; \ +- ranlib $(DEST)/$(LIBNAME) ; \ +- else \ +- true ; \ +- fi ; \ +- if test -d $(DEST)/debug ; then \ +- echo cp $(LIBNAME) $(DEST)/debug/$(LIBNAME) ; \ +- if test x$(RANLIB) != x ; then \ +- cp $(LIBNAME) $(DEST)/debug/$(LIBNAME) ; \ +- echo ranlib $(DEST)/debug/$(LIBNAME) ; \ +- else \ +- true ; \ +- fi ; \ +- ranlib $(DEST)/debug/$(LIBNAME) ; \ ++ echo ranlib $(DEST)/$(LIBANAME) ; \ ++ ranlib $(DEST)/$(LIBANAME) ; \ + else \ + true ; \ + fi ; \ +@@ -63,14 +56,24 @@ + touch install + + # Rebuild the library from all the .o files. +-buildlib: $(OBJS) +- -rm -f $(LIBNAME) +- ar rc $(LIBNAME) +- ar q $(LIBNAME) $(OBJS) ++buildlib: $(LIBANAME) $(LIBSONAME) ++ ++$(LIBANAME): $(OBJS) ++ -rm -f $@ ++ ar rc $@ $? + #ifndef NO_RANLIB +- ranlib $(LIBNAME) ++ ranlib $@ + #endif +- touch buildlib ++ ++.SUFFIXES: .so .o ++ ++.c.so: ++ $(CC) -fPIC -DPIC $(CFLAGS) -c $*.c -o $*.so ++ $(LD) -X -r $*.so ++ ++$(LIBSONAME): $(SOOBJS) ++ -rm -f $@ ++ ld -Bshareable -o $@ $> + + # Clean up installed stuff and binaries + pristine: clean +@@ -86,9 +89,12 @@ + # Get rid of everything which must be recompiled on a different computer. + clean: + -rm -f *.o ++ -rm -f *.so + -@if test x$(DEST) != x ; then \ +- echo rm -f $(LIBNAME) ; \ +- rm -f $(LIBNAME) ; \ ++ echo rm -f $(LIBANAME) ; \ ++ rm -f $(LIBANAME) ; \ ++ echo rm -f $(LIBSONAME) ; \ ++ rm -f $(LIBSONAME) ; \ + else \ + true ; \ + fi +diff -ur ../urt-3.1b-orig/makefile.src ./makefile.src +--- ../urt-3.1b-orig/makefile.src Fri Jun 7 11:58:13 1991 ++++ ./makefile.src Fri Sep 15 22:09:01 1995 +@@ -17,7 +17,7 @@ + # clean deletes all but source, pristine (below) deletes installed stuff, too + default clean: doit + @for d in $(DIRS) ; do \ +- ( cd $$d ; echo make $@ on $$d ; make $(MFLAGS) $@ ) ; \ ++ ( cd $$d ; echo make $@ on $$d ; $(MAKE) $(MFLAGS) $@ ) ; \ + done + + # install puts library, binaries and documentation into global location +@@ -29,7 +29,7 @@ + + install $(MAKE_TARGET) pristine depend:: doit + @for d in $(ALLDIRS) ; do \ +- ( cd $$d ; echo make $@ on $$d ; make $(MFLAGS) $@ ) ; \ ++ ( cd $$d ; echo make $@ on $$d ; $(MAKE) $(MFLAGS) $@ ) ; \ + done + + +diff -ur ../urt-3.1b-orig/makefile.tlr ./makefile.tlr +--- ../urt-3.1b-orig/makefile.tlr Tue Aug 4 13:17:57 1992 ++++ ./makefile.tlr Sat Sep 16 10:35:58 1995 +@@ -7,7 +7,7 @@ + @sh -c "if test 'x$(DIRS)' != x ; then eval \ + 'set -e ; for dir in $(DIRS) ; do \ + (cd \$$dir ; echo Make ${HERE}\$$dir ; \ +- make $(MFLAGS) $(DIRMFLAGS) ) ; \ ++ $(MAKE) $(MFLAGS) $(DIRMFLAGS) ) ; \ + done' ; \ + else \ + true ; \ +@@ -46,7 +46,7 @@ + @sh -c "if test 'x$(DIRS)' != x ; then eval \ + 'for dir in $(DIRS) ; do \ + (cd \$$dir ; echo Install ${HERE}\$$dir ; \ +- make $(MFLAGS) $(DIRMFLAGS) install) ; \ ++ $(MAKE) $(MFLAGS) $(DIRMFLAGS) install) ; \ + done' ; \ + else \ + true ; \ +@@ -105,7 +105,7 @@ + 'for dir in $(ALLDIRS); do \ + if test -d $$dir ; then \ + (cd $$dir; echo Make ${HERE}$$dir pristine ; \ +- make $(MFLAGS) pristine); \ ++ $(MAKE) $(MFLAGS) pristine); \ + else \ + true; \ + fi; \ +@@ -124,7 +124,7 @@ + 'for dir in $(ALLDIRS); do \ + if test -d $$dir ; then \ + (cd $$dir; echo Clean ${HERE}$$dir ; \ +- make $(MFLAGS) clean); \ ++ $(MAKE) $(MFLAGS) clean); \ + else \ + true; \ + fi; \ +diff -ur ../urt-3.1b-orig/tools/into.c ./tools/into.c +--- ../urt-3.1b-orig/tools/into.c Thu Apr 30 10:10:15 1992 ++++ ./tools/into.c Sat Sep 16 10:32:26 1995 +@@ -41,7 +41,10 @@ + short forceflg; /* overwrite an unwritable file? + */ + + extern int errno; ++ ++#ifndef BSD + extern char *sys_errlist[]; ++#endif + + void + main(argc, argv) +diff -ur ../urt-3.1b-orig/tools/makefile.src ./tools/makefile.src +--- ../urt-3.1b-orig/tools/makefile.src Tue Jan 28 15:47:42 1992 ++++ ./tools/makefile.src Sat Sep 16 10:33:14 1995 +@@ -68,7 +68,7 @@ + fant.out: fant.o mallocNd.o + $(CC) $(CFLAGS) -I$(RI) fant.o mallocNd.o $(LIBS) -lm -o fant.new + mv fant.new fant.out +- ++ + # rlebox and crop use some common code. + rle_box.o: $(RI)/rle.h $(RI)/rle_config.h $(RI)/rle_raw.h + +@@ -82,7 +82,7 @@ + # rleClock has it's own directory, must be built special + + rleClock.out: clock/font.c clock/font.h clock/font.src clock/rleClock.c +- (cd clock ; make) ++ (cd clock ; $(MAKE)) + + # Incremental install, copies everything ("$?") since last install to DEST dir. + install: $(PGMS) install-pgm diff -rNu /cdrom/ports/graphics/urt/pkg/PLIST urt/pkg/PLIST --- /cdrom/ports/graphics/urt/pkg/PLIST Tue Jun 3 18:41:07 1997 +++ urt/pkg/PLIST Mon Jan 5 23:31:44 1998 @@ -210,12 +210,13 @@ share/doc/urt/toolkit.doc share/doc/urt/toolkit.mss share/doc/urt/toolkit.ps -share/doc/urt/img/README -share/doc/urt/img/christmas_ball.rle -share/doc/urt/img/dart.rle -share/doc/urt/img/lenna.rle -share/doc/urt/img/mandrill.rle -share/doc/urt/img/tack_w_shadow.rle +share/examples/urt/img/README +share/examples/urt/img/christmas_ball.rle +share/examples/urt/img/dart.rle +share/examples/urt/img/lenna.rle +share/examples/urt/img/mandrill.rle +share/examples/urt/img/tack_w_shadow.rle @dirrm share/doc/urt/pics -@dirrm share/doc/urt/img @dirrm share/doc/urt +@dirrm share/examples/doc/urt/img +@dirrm share/examples/urt diff -rNu /cdrom/ports/graphics/urt/scripts/00_TRANS.TBL urt/scripts/00_TRANS.TBL --- /cdrom/ports/graphics/urt/scripts/00_TRANS.TBL Tue Oct 21 16:26:47 1997 +++ urt/scripts/00_TRANS.TBL Wed Dec 31 19:00:00 1969 @@ -1,2 +0,0 @@ -F CONFIGUR configure -D CVS CVS diff -rNu /cdrom/ports/graphics/urt/scripts/CVS/00_TRANS.TBL urt/scripts/CVS/00_TRANS.TBL --- /cdrom/ports/graphics/urt/scripts/CVS/00_TRANS.TBL Tue Oct 21 16:26:47 1997 +++ urt/scripts/CVS/00_TRANS.TBL Wed Dec 31 19:00:00 1969 @@ -1,3 +0,0 @@ -F ENTRIES Entries -F REPOSITO Repository -F ROOT Root diff -rNu /cdrom/ports/graphics/urt/scripts/CVS/Entries urt/scripts/CVS/Entries --- /cdrom/ports/graphics/urt/scripts/CVS/Entries Tue Oct 21 07:04:45 1997 +++ urt/scripts/CVS/Entries Wed Dec 31 19:00:00 1969 @@ -1,2 +0,0 @@ -/configure/1.1.1.1/Tue Jun 3 23:41:07 1997// -D diff -rNu /cdrom/ports/graphics/urt/scripts/CVS/Repository urt/scripts/CVS/Repository --- /cdrom/ports/graphics/urt/scripts/CVS/Repository Tue Oct 21 07:04:45 1997 +++ urt/scripts/CVS/Repository Wed Dec 31 19:00:00 1969 @@ -1 +0,0 @@ -/home/ncvs/ports/graphics/urt/scripts diff -rNu /cdrom/ports/graphics/urt/scripts/CVS/Root urt/scripts/CVS/Root --- /cdrom/ports/graphics/urt/scripts/CVS/Root Tue Oct 21 07:04:45 1997 +++ urt/scripts/CVS/Root Wed Dec 31 19:00:00 1969 @@ -1 +0,0 @@ -/home/ncvs diff -rNu /cdrom/ports/graphics/urt/scripts/configure urt/scripts/configure --- /cdrom/ports/graphics/urt/scripts/configure Tue Jun 3 18:41:07 1997 +++ urt/scripts/configure Wed Dec 31 19:00:00 1969 @@ -1,19 +0,0 @@ -#!/bin/sh - -cd $WRKSRC || exit 1 - -cd config || exit 1 -sed "s%FBSD_PREFIX%${PREFIX}%g" urt > urt.sed -mv urt.sed urt -cd .. - -PATH=.:$PATH -chmod 755 ./Configure -./Configure config/urt - -# bsd.ports.mk has ``Makefile'' hardcoded. -# do a link to makefile. -# (We don't move it because it is present in dependencies). -ln -s makefile Makefile - -exit 0 >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-ports" in the body of the message