From owner-freebsd-stable Mon Jul 30 13:19:25 2001 Delivered-To: freebsd-stable@freebsd.org Received: from ptavv.es.net (ptavv.es.net [198.128.4.29]) by hub.freebsd.org (Postfix) with ESMTP id 4D0AC37B401 for ; Mon, 30 Jul 2001 13:19:22 -0700 (PDT) (envelope-from oberman@ptavv.es.net) Received: from ptavv.es.net (localhost [127.0.0.1]) by ptavv.es.net (8.10.1/8.10.1) with ESMTP id f6UKI6b28543; Mon, 30 Jul 2001 13:18:06 -0700 (PDT) Message-Id: <200107302018.f6UKI6b28543@ptavv.es.net> To: Tim Kellers Cc: stable@FreeBSD.ORG Subject: Re: PERC 3 Dell 2500 and FreeBSD 4.3 stable In-reply-to: Your message of "Mon, 30 Jul 2001 15:58:41 EDT." Date: Mon, 30 Jul 2001 13:18:06 -0700 From: "Kevin Oberman" Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Date: Mon, 30 Jul 2001 15:58:41 -0400 (EDT) > From: Tim Kellers > Sender: owner-freebsd-stable@FreeBSD.ORG > > > Has anyone gotten the PERC 3 RAID controller to work using FreeBSD 4.3? > > It looks like I might have to build a boot disk (a la kern.flp) with a > precompiled kernel with the appropriate PERC 2/3 OPTIONS. > > I haven't done this before and was wondering if there is any documentation > for building a custom boot floppy? Tim, The standard boot floppies should handle the PERC, but at least 4.3 floppies are needed as most of the RAID stuff came after 4.2 was released. Also you need to go in at boot time and set up the containers before ANY OS can deal with them. I believe you need to type CTRL-A at the correct time during the boot to get to the config utility. The model PERC 3 is really not adequate to identify the card and PERC is the name DELL sticks on all of it's RAID controllers, regardless of who made them or whether they are integrated onto the mobo or external. I run Dell PowerEdge servers with PERC3/Si RAID controllers running as RAID 1. If you have the complete model number, it's possible to tell who made it and which driver should be used. Should be either ami or aac. (The former for American Megatrends and the latter for Adaptec.) Here is a summary of PERC hardware from Mike Smith who did most (all) of the driver work for them: The PERC, PERC 2/SC, PERC 2/DC and PERC 3/D* are AMI designs. The PERC 2/Si, PERC 2/Di, PERC 3/Si and PERC 2/QC are Adaptec designs. "PERC" means "this is a Dell-branded RAID controller". "2" and "3" refer to 40MHz vs 80MHz SCSI support. "S" "D" and "Q" are single, dual and quad channel designations. "i" means it's integrated onto the server motherboard. "C" means it's an addin card. "L" means it's the low-cost version. R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message