From owner-freebsd-questions Sat Nov 18 22:53:39 2000 Delivered-To: freebsd-questions@freebsd.org Received: from alpha.gplsucks.org (alpha.gplsucks.org [63.227.213.92]) by hub.freebsd.org (Postfix) with ESMTP id 1997E37B479 for ; Sat, 18 Nov 2000 22:53:37 -0800 (PST) Received: from localhost (bwoods2@localhost) by alpha.gplsucks.org (8.11.1/8.11.1) with ESMTP id eAJ6rbb01753; Sat, 18 Nov 2000 22:53:37 -0800 (PST) Date: Sat, 18 Nov 2000 22:53:37 -0800 (PST) From: Bill Woods To: cjclark@alum.mit.edu Cc: Bill Woods , freebsd-questions@FreeBSD.ORG Subject: Re: Bridging... In-Reply-To: <20001118224126.F38109@149.211.6.64.reflexcom.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Looks like I have to, no other options, I spent hours today trying to get away from it. I actually have it going nicely now, I have the option to use ipfw, I can go with that but I am still searching to find out if ipf works. Regarding the 2 logical networks, No, I dont, I actually have 8 ips, but was trying to get "creative" per a request. Like I said, I have the bridge going and it SEEMS to be fine..... Thanks On Sat, 18 Nov 2000, Crist J . Clark wrote: > On Sat, Nov 18, 2000 at 07:47:27PM -0800, Bill Woods wrote: > > It looks like I am going to have to do some bridging of ethernet cards in > > 4.2-BETA, so what I need to know are a few things.... > > > > In rc.conf where I set up ethernet cards, this is what I have now.. > > > > ifconfig_ep0="inet 63.227.213.93 netmask 255.255.255.248" > > ifconfig_ep1="inet 10.0.0.99 netmask 255.255.255.255" > > > > ep0 conects to the world > > ep1 connects to my internal lan > > If you really have two different logical networks, you do not want to > be doing bridging. If you are going to be bridging, the best way to go > is only put an IP address on one of the NICs. > > > Since I am going to be bridging the two cards as one, what settings do I > > use. I looked in the handbook, but its not that clear to me. > > > > Also, does ipf work with bridging ethernet cards or do I need to go to > > ipfw? > > I know IPF does bridging... on some platforms. I can't recall if it > works on FreeBSD. Did you search the email archive? > > > Also, the cards are: > > > > ep0: <3Com 3C509-TPO EtherLink III> at port 0x210-0x21f irq 7 on isa0 > > ep0: Ethernet address 00:a0:24:31:de:03 > > ep1: <3Com 3C509-TPO EtherLink III> at port 0x300-0x30f irq 10 on isa0 > > ep1: Ethernet address 00:a0:24:9b:99:d8 > > > > Will these cards work in bridging mode? > > $ man bridge > . > . > . > Not all interface support bridging -- at the moment it works for ``ed'', > ``de'', ``ep'', ``fe'', ``fxp'', ``lnc'', ``mx'', ``tx'', and ``xl'' in- > terfaces. > ^^ > Seems like it. > > > any oither helpfull hints? > > Do not do it unless you have to. FreeBSD bridging worked fine for me > in 3.x, but I was not doing any firewalling. > -- > Crist J. Clark cjclark@alum.mit.edu > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message