From owner-freebsd-questions Fri Jan 26 4:52: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from bryden.apana.org.au (bryden.apana.org.au [203.3.126.129]) by hub.freebsd.org (Postfix) with ESMTP id C8F4D37B402 for ; Fri, 26 Jan 2001 04:51:34 -0800 (PST) Received: from roadrunner (roadrunner.apana.org.au [203.3.126.132]) by bryden.apana.org.au (8.11.1/8.11.1) with SMTP id f0QCp2A02781; Fri, 26 Jan 2001 22:51:04 +1000 (EST) (envelope-from dougy@bryden.apana.org.au) Message-ID: <00ff01c08796$b0cf6580$847e03cb@apana.org.au> From: "Doug Young" To: "Artem Koutchine" , , References: <20010126123523.068D52750@sitemail.everyone.net> <005e01c08795$9fd9c5a0$0c00a8c0@ipform.ru> Subject: Re: New Kernel install Date: Fri, 26 Jan 2001 22:51:15 +1000 MIME-Version: 1.0 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MIMEOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG My cvsup updates ports every week & source every day ----- Original Message ----- From: "Artem Koutchine" To: ; "Doug Young" ; Sent: Friday, January 26, 2001 10:42 PM Subject: Re: New Kernel install > Did you cvsuped lately? Try cvsupping again and > use > > make buildkernel KERNEL=YOUKERNELNAME > make installkernel KERNEL=YOUKERNELNAME > > > ----- Original Message ----- > From: "Benjamin Ossei" > To: "Doug Young" ; > Sent: Friday, January 26, 2001 3:35 PM > Subject: Re: New Kernel install > > > > Do you think there's a bug in the software? > > > > --- "Doug Young" > > > wrote: > > >I tried the kernel compile in 4.2 earlier today & got similar > response .... > > >looks like > > >some "feature" there that needs attention > > > > > >----- Original Message ----- > > >From: "Benjamin Ossei" > > >To: > > >Sent: Friday, January 26, 2001 10:23 PM > > >Subject: New Kernel install > > > > > > > > >Hi, > > > > > >I'm trying to compile a new kernel for my machine. I used the > GENERIC > > >configuration as a starting point and added what I needed and > commented out > > >what I didn't want. I was able to issue the command > /usr/sbin/config -g > > >"newkernel" fine but when I go to build the kernel with the make > depend or > > >just make I get a stop error. The error indicates that there's > unterminited > > >string or something to the effect and gives me this "#IF" for the > problem. > > >I've gone through my kernel config and can not see anything. I'm > not very > > >good at this I should also say. > > > > > >I'm using Freebsd 4.2-Current. This is my first custom kernel. > I've > > >attached the file for your viewing and hopefully you can see my > problem. I > > >included the options IPFIREWALL_DEFAULT_TO_ACCEPT for now to get > the machine > > >up and running. I'll change this to DENY once I"m done and > recompile the > > >kernel. > > > > > >Thanks for your help. > > > > > > > > > > > >_____________________________________________________________ > > >========GET YOUR FREE E-MAIL============ > > >http://freemail.cahostnet.net > > >Web Hosting http://www.cahostnet.com > > > > > > > > > > > > >--------------------------------------------------------------------- > ------- > > >---- > > > > > > > > >> # > > >> # GENERIC -- Generic kernel configuration file for FreeBSD/i386 > > >> # > > >> # For more information on this file, please read the handbook > section on > > >> # Kernel Configuration Files: > > >> # > > >> # http://www.FreeBSD.org/handbook/kernelconfig-config.html > > >> # > > >> # The handbook is also available locally in > /usr/share/doc/handbook > > >> # if you've installed the doc distribution, otherwise always see > the > > >> # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the > > >> # latest information. > > >> # > > >> # An exhaustive list of options and more detailed explanations of > the > > >> # device lines is also present in the ./LINT configuration file. > If you > > >are > > >> # in doubt as to the purpose or necessity of a line, check first > in LINT. > > >> # > > >> # $FreeBSD: src/sys/i386/conf/FWKERNEL,v 1 2001/01/25 22:45 Ben > Ossei Exp > > >$ > > >> > > >> machine i386 > > >> cpu I386_CPU > > >> cpu I486_CPU > > >> cpu I586_CPU > > >> cpu I686_CPU > > >> ident FWKERNEL > > >> maxusers 64 > > >> > > >> # makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols > > >> > > >> # options MATH_EMULATE #Support for x87 emulation > > >> options INET #InterNETworking > > >> options INET6 #IPv6 communications protocols > > >> options FFS #Berkeley Fast Filesystem > > >> options FFS_ROOT #FFS usable as root device [keep this!] > > >> options SOFTUPDATES #Enable FFS soft updates support > > >> options MFS #Memory Filesystem > > >> options MD_ROOT #MD is a potential root device > > >> # options NFS #Network Filesystem > > >> # options NFS_ROOT #NFS usable as root device, NFS required > > >> # options MSDOSFS #MSDOS Filesystem > > >> options CD9660 #ISO 9660 Filesystem > > >> options CD9660_ROOT #CD-ROM usable as root, CD9660 required > > >> options PROCFS #Process filesystem > > >> options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] > > >> options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI > > >> # options UCONSOLE #Allow users to grab the console > > >> options USERCONFIG #boot -c editor > > >> options VISUAL_USERCONFIG #visual boot -c editor > > >> options KTRACE #ktrace(1) support > > >> options SYSVSHM #SYSV-style shared memory > > >> options SYSVMSG #SYSV-style message queues > > >> options SYSVSEM #SYSV-style semaphores > > >> options P1003_1B #Posix P1003_1B real-time extensions > > >> options _KPOSIX_PRIORITY_SCHEDULING > > >> options ICMP_BANDLIM #Rate limit bad replies > > >> options KBD_INSTALL_CDEV #install a CDEV entry in /dev > > >> options IPFIREWALL > > >> options IPFIREWALL_VERBOSE > > >> options IPDIVERT > > >> options IPFIREWALL_DEFAULT_TO_ACCEPT > > >> options IPFIREWALL_VERBOSE_LIMIT=100 > > >> options IPFILTER > > >> options IPFILTER_LOG > > >> > > >> # To make an SMP kernel, the next two are needed > > >> options SMP # Symmetric MultiProcessor Kernel > > >> options APIC_IO # Symmetric (APIC) I/O > > >> > > >> device isa > > >> device eisa > > >> device pci > > >> > > >> # Floppy drives > > >> device fdc0 at isa? port IO_FD1 irq 6 drq 2 > > >> device fd0 at fdc0 drive 0 > > >> # device fd1 at fdc0 drive 1 > > >> > > >> # ATA and ATAPI devices > > >> device ata0 at isa? port IO_WD1 irq 14 > > >> device ata1 at isa? port IO_WD2 irq 15 > > >> device ata > > >> device atadisk # ATA disk drives > > >> device atapicd # ATAPI CDROM drives > > >> device atapifd # ATAPI floppy drives > > >> device atapist # ATAPI tape drives > > >> options ATA_STATIC_ID #Static device numbering > > >> # options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices > > >> > > >> # SCSI Controllers > > >> # device ahb # EISA AHA1742 family > > >> # device ahc # AHA2940 and onboard AIC7xxx devices > > >> # device amd # AMD 53C974 (Teckram DC-390(T)) > > >> # device isp # Qlogic family > > >> # device ncr # NCR/Symbios Logic > > >> # device sym # NCR/Symbios Logic (newer chipsets) > > >> # options SYM_SETUP_LP_PROBE_MAP=0x40 > > >> # Allow ncr to attach legacy NCR devices when > > >> # both sym and ncr are configured > > >> > > >> # device adv0 at isa? > > >> # device adw > > >> # device bt0 at isa? > > >> # device aha0 at isa? > > >> # device aic0 at isa? > > >> > > >> # device ncv # NCR 53C500 > > >> # device nsp # Workbit Ninja SCSI-3 > > >> # device stg # TMC 18C30/18C50 > > >> > > >> # SCSI peripherals > > >> # device scbus # SCSI bus (required) > > >> # device da # Direct Access (disks) > > >> # device sa # Sequential Access (tape etc) > > >> # device cd # CD > > >> # device pass # Passthrough device (direct SCSI access) > > >> > > >> # RAID controllers interfaced to the SCSI subsystem > > >> # device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID > > >> # device dpt # DPT Smartcache - See LINT for options! > > >> # device mly # Mylex AcceleRAID/eXtremeRAID > > >> > > >> # RAID controllers > > >> # device ida # Compaq Smart RAID > > >> # device amr # AMI MegaRAID > > >> # device mlx # Mylex DAC960 family > > >> # device twe # 3ware Escalade > > >> > > >> # atkbdc0 controls both the keyboard and the PS/2 mouse > > >> device atkbdc0 at isa? port IO_KBD > > >> device atkbd0 at atkbdc? irq 1 flags 0x1 > > >> device psm0 at atkbdc? irq 12 > > >> > > >> device vga0 at isa? > > >> > > >> # splash screen/screen saver > > >> pseudo-device splash > > >> > > >> # syscons is the default console driver, resembling an SCO > console > > >> device sc0 at isa? flags 0x100 > > >> > > >> # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console > driver > > >> # device vt0 at isa? > > >> # options XSERVER # support for X server on a vt console > > >> # options FAT_CURSOR # start with block cursor > > >> # If you have a ThinkPAD, uncomment this along with the rest of > the PCVT > > >lines > > >> # options PCVT_SCANSET=2 # IBM keyboards are non-std > > >> > > >> # Floating point support - do not disable. > > >> device npx0 at nexus? port IO_NPX irq 13 > > >> > > >> # Power management support (see LINT for more options) > > >> device apm0 at nexus? disable flags 0x20 # Advanced Power > Management > > >> > > >> # PCCARD (PCMCIA) support > > >> # device card > > >> # device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 > > >> # device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable > > >> > > >> # Serial (COM) ports > > >> device sio0 at isa? port IO_COM1 flags 0x10 irq 4 > > >> device sio1 at isa? port IO_COM2 irq 3 > > >> device sio2 at isa? disable port IO_COM3 irq 5 > > >> device sio3 at isa? disable port IO_COM4 irq 9 > > >> > > >> # Parallel port > > >> device ppc0 at isa? irq 7 > > >> device ppbus # Parallel port bus (required) > > >> device lpt # Printer > > >> # device plip # TCP/IP over parallel > > >> device ppi # Parallel port interface device > > >> # device vpo # Requires scbus and da > > >> > > >> > > >> # PCI Ethernet NICs. > > >> # device de # DEC/Intel DC21x4x (``Tulip'') > > >> device fxp # Intel EtherExpress PRO/100B (82557, 82558) > > >> # device tx # SMC 9432TX (83c170 ``EPIC'') > > >> device vx # 3Com 3c590, 3c595 (``Vortex'') > > >> # device wx # Intel Gigabit Ethernet Card (``Wiseman'') > > >> > > >> # PCI Ethernet NICs that use the common MII bus controller code. > > >> # NOTE: Be sure to keep the 'device miibus' line in order to use > these > > >NICs! > > >> device miibus # MII bus support > > >> device dc # DEC/Intel 21143 and various workalikes > > >> # device pcn # AMD Am79C79x PCI 10/100 NICs > > >> # device rl # RealTek 8129/8139 > > >> # device sf # Adaptec AIC-6915 (``Starfire'') > > >> # device sis # Silicon Integrated Systems SiS 900/SiS 7016 > > >> # device ste # Sundance ST201 (D-Link DFE-550TX) > > >> # device tl # Texas Instruments ThunderLAN > > >> # device vr # VIA Rhine, Rhine II > > >> # device wb # Winbond W89C840F > > >> device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') > > >> > > >> # ISA Ethernet NICs. > > >> # device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 > > >> # device ex > > >> # device ep > > >> # device fe0 at isa? port 0x300 > > >> # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE > really > > >> # exists only as a PCMCIA device, so there is no ISA attatement > needed > > >> # and resources will always be dynamically assigned by the pccard > code. > > >> # device wi > > >> # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration > below will > > >> # work for PCMCIA and PCI cards, as well as ISA cards set to ISA > PnP > > >> # mode (the factory default). If you set the switches on your ISA > > >> # card for a manually chosen I/O address and IRQ, you must > specify > > >> # those paremeters here. > > >> # device an > > >> # Xircom Ethernet > > >> # device xe > > >> # The probe order of these is presently determined by > > >i386/isa/isa_compat.c. > > >> # device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 > > >> # device le0 at isa? port 0x300 irq 5 iomem 0xd0000 > > >> # device lnc0 at isa? port 0x280 irq 10 drq 0 > > >> # device cs0 at isa? port 0x300 > > >> # device sn0 at isa? port 0x300 irq 10 > > >> > > >> # Pseudo devices - the number indicates how many units to > allocated. > > >> pseudo-device loop # Network loopback > > >> pseudo-device ether # Ethernet support > > >> # pseudo-device sl 1 # Kernel SLIP > > >> # pseudo-device ppp 1 # Kernel PPP > > >> # pseudo-device tun # Packet tunnel. > > >> pseudo-device pty # Pseudo-ttys (telnet etc) > > >> pseudo-device md # Memory "disks" > > >> pseudo-device gif 4 # IPv6 and IPv4 tunneling > > >> pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) > > >> > > >> # The `bpf' pseudo-device enables the Berkeley Packet Filter. > > >> # Be aware of the administrative consequences of enabling this! > > >> pseudo-device bpf #Berkeley packet filter > > >> > > >> # USB support > > >> # device uhci # UHCI PCI->USB interface > > >> # device ohci # OHCI PCI->USB interface > > >> device usb # USB Bus (required) > > >> device ugen # Generic > > >> device uhid # "Human Interface Devices" > > >> device ukbd # Keyboard > > >> device ulpt # Printer > > >> # device umass # Disks/Mass storage - Requires scbus and da > > >> device ums # Mouse > > >> # device uscanner # Scanners > > >> # USB Ethernet, requires mii > > >> # device aue # ADMtek USB ethernet > > >> # device cue # CATC USB ethernet > > >> # device kue # Kawasaki LSI USB ethernet > > >> > > > > _____________________________________________________________ > > ========GET YOUR FREE E-MAIL============ > > http://freemail.cahostnet.net > > Web Hosting http://www.cahostnet.com > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message