From owner-freebsd-questions Fri Jan 26 7:53:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from omta05.mta.everyone.net (reports.everyone.net [216.200.145.62]) by hub.freebsd.org (Postfix) with ESMTP id 9239637B400 for ; Fri, 26 Jan 2001 07:52:51 -0800 (PST) Received: from sitemail.everyone.net (reports [216.200.145.62]) by omta05.mta.everyone.net (Postfix) with ESMTP id 83E0248486 for ; Fri, 26 Jan 2001 07:52:51 -0800 (PST) Received: by sitemail.everyone.net (Postfix, from userid 99) id 5FFA536F9; Fri, 26 Jan 2001 07:52:51 -0800 (PST) Content-Type: text/plain Content-Disposition: inline Mime-Version: 1.0 X-Mailer: MIME-tools 4.104 (Entity 4.117) Date: Fri, 26 Jan 2001 07:52:51 -0800 (PST) From: Benjamin Ossei To: questions@freebsd.org Subject: Re: New Kernel install Reply-To: ben@cahostnet.net X-Originating-Ip: [162.6.224.88] Message-Id: <20010126155251.5FFA536F9@sitemail.everyone.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is the error I get at the end. ../../dev/ppbus/ppb_1284.c:705: unterminated string or character constant ../../dev/ppbus/ppb_1284.c:702: unterminated `#if' conditional --- Benjamin Ossei > wrote: >Anyoneone else has any suggestions to my problem? I've attached the configuration file. Thanks for your help. > >--- Benjamin Ossei >> wrote: >>Part: 1 >>
Hi,
>>
>>I'm trying to compile a new kernel for my machine.  I used the GENERIC configuration 
>>as a starting point and added what I needed and commented out what I didn't 
>>want.  I was able to issue the command /usr/sbin/config -g "newkernel" fine 
>>but when I go to build the kernel with the make depend or just make I get 
>>a stop error.  The error indicates that there's unterminited string or something 
>>to the effect and gives me this "#IF" for the problem.  I've gone through 
>>my kernel config and can not see anything. I'm not very good at this I should 
>>also say.
>>
>>I'm using Freebsd 4.2-Current.  This is my first custom kernel.  I've attached 
>>the file for your viewing and hopefully  you can see my problem.  I included 
>>the options IPFIREWALL_DEFAULT_TO_ACCEPT for now to get the machine up and 
>>running.  I'll change this to DENY once I"m done and recompile the kernel.  
>>
>>
>>Thanks for your help.
>>
>>
>>
>>_____________________________________________________________
>>========GET YOUR FREE E-MAIL============
>>http://freemail.cahostnet.net
>>Web Hosting http://www.cahostnet.com
>>
Part: 2 >>
#
>># GENERIC -- Generic kernel configuration file for FreeBSD/i386
>>#
>># For more information on this file, please read the handbook section on
>># Kernel Configuration Files:
>>#
>>#    http://www.FreeBSD.org/handbook/kernelconfig-config.html
>>#
>># The handbook is also available locally in /usr/share/doc/handbook
>># if you've installed the doc distribution, otherwise always see the
>># FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
>># latest information.
>>#
>># An exhaustive list of options and more detailed explanations of the
>># device lines is also present in the ./LINT configuration file. If you 
>>are
>># in doubt as to the purpose or necessity of a line, check first in LINT.
>>#
>># $FreeBSD: src/sys/i386/conf/FWKERNEL,v 1 2001/01/25 22:45 Ben Ossei Exp 
>>$
>>
>>machine		i386
>>cpu		I386_CPU
>>cpu		I486_CPU
>>cpu		I586_CPU
>>cpu		I686_CPU
>>ident		FWKERNEL
>>maxusers	64
>>
>># makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
>>
>># options 	MATH_EMULATE		#Support for x87 emulation
>>options 	INET			#InterNETworking
>>options 	INET6			#IPv6 communications protocols
>>options 	FFS			#Berkeley Fast Filesystem
>>options 	FFS_ROOT		#FFS usable as root device [keep this!]
>>options 	SOFTUPDATES		#Enable FFS soft updates support
>>options 	MFS			#Memory Filesystem
>>options 	MD_ROOT			#MD is a potential root device
>># options 	NFS			#Network Filesystem
>># options 	NFS_ROOT		#NFS usable as root device, NFS required
>># options 	MSDOSFS			#MSDOS Filesystem
>>options		CD9660		#ISO 9660 Filesystem
>>options 	CD9660_ROOT		#CD-ROM usable as root, CD9660 required
>>options 	PROCFS			#Process filesystem
>>options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
>>options 	SCSI_DELAY=15000	#Delay (in ms) before probing SCSI
>># options 	UCONSOLE		#Allow users to grab the console
>>options 	USERCONFIG		#boot -c editor
>>options 	VISUAL_USERCONFIG	#visual boot -c editor
>>options 	KTRACE			#ktrace(1) support
>>options 	SYSVSHM			#SYSV-style shared memory
>>options 	SYSVMSG			#SYSV-style message queues
>>options 	SYSVSEM			#SYSV-style semaphores
>>options 	P1003_1B		#Posix P1003_1B real-time extensions
>>options 	_KPOSIX_PRIORITY_SCHEDULING
>>options		ICMP_BANDLIM		#Rate limit bad replies
>>options 	KBD_INSTALL_CDEV	#install a CDEV entry in /dev
>>options		IPFIREWALL		
>>options		IPFIREWALL_VERBOSE
>>options	 	IPDIVERT
>>options		IPFIREWALL_DEFAULT_TO_ACCEPT	
>>options		IPFIREWALL_VERBOSE_LIMIT=100
>>options		IPFILTER		
>>options		IPFILTER_LOG		
>>	
>># To make an SMP kernel, the 
>>next two are needed
>>options 	SMP			# Symmetric MultiProcessor Kernel
>>options 	APIC_IO			# Symmetric (APIC) I/O
>>
>>device		isa
>>device		eisa
>>device		pci
>>
>># Floppy drives
>>device		fdc0	at isa? port IO_FD1 irq 6 drq 2
>>device		fd0	at fdc0 drive 0
>># device		fd1	at fdc0 drive 1
>>
>># ATA and ATAPI devices
>>device		ata0	at isa? port IO_WD1 irq 14
>>device		ata1	at isa? port IO_WD2 irq 15
>>device		ata
>>device		atadisk			# ATA disk drives
>>device		atapicd			# ATAPI CDROM drives
>>device		atapifd			# ATAPI floppy drives
>>device		atapist			# ATAPI tape drives
>>options 	ATA_STATIC_ID		#Static device numbering
>># options 	ATA_ENABLE_ATAPI_DMA	#Enable DMA on ATAPI devices
>>
>># SCSI Controllers
>># device		ahb		# EISA AHA1742 family
>># device		ahc		# AHA2940 and onboard AIC7xxx devices
>># device		amd		# AMD 53C974 (Teckram DC-390(T))
>># device		isp		# Qlogic family
>># device		ncr		# NCR/Symbios Logic
>># device		sym		# NCR/Symbios Logic (newer chipsets)
>># options		SYM_SETUP_LP_PROBE_MAP=0x40
>>				# Allow ncr to attach legacy NCR devices when 
>>				# both sym and ncr 
>>are configured
>>
>># device		adv0	at isa?
>># device		adw
>># device		bt0	at isa?
>># device		aha0	at isa?
>># device		aic0	at isa?
>>
>># device		ncv		# NCR 53C500
>># device		nsp		# Workbit Ninja SCSI-3
>># device		stg		# TMC 18C30/18C50
>>
>># SCSI peripherals
>># device		scbus		# SCSI bus (required)
>># device		da		# Direct Access (disks)
>># device		sa		# Sequential Access (tape etc)
>># device		cd		# CD
>># device		pass	# Passthrough device (direct SCSI access)
>>
>># RAID controllers interfaced to the SCSI subsystem
>># device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID
>># device		dpt		# DPT Smartcache - See LINT for options!
>># device		mly		# Mylex AcceleRAID/eXtremeRAID
>>
>># RAID controllers
>># device		ida		# Compaq Smart RAID
>># device		amr		# AMI MegaRAID
>># device		mlx		# Mylex DAC960 family
>># device		twe		# 3ware Escalade
>>
>># atkbdc0 controls both the keyboard and the PS/2 mouse
>>device		atkbdc0	at isa? port IO_KBD
>>device		atkbd0	at atkbdc? irq 1 flags 0x1
>>device		psm0	at atkbdc? irq 12
>>
>>device		vga0	at isa?
>>
>># splash screen/screen saver
>>pseudo-device	splash
>>
>># syscons is the default console driver, resembling an SCO console
>>device		sc0	at isa? flags 0x100
>>
>># Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
>># device		vt0	at isa?
>># options 	XSERVER			# support for X server on a vt console
>># options 	FAT_CURSOR		# start with block cursor
>># If you have a ThinkPAD, uncomment this along with the rest of the PCVT 
>>lines
>># options 	PCVT_SCANSET=2		# IBM keyboards are non-std
>>
>># Floating point support - do not disable.
>>device		npx0	at nexus? port IO_NPX irq 13
>>
>># Power management support (see LINT for more options)
>>device		apm0    at nexus? disable flags 0x20 # Advanced Power Management
>>
>># PCCARD (PCMCIA) support
>># device		card
>># device		pcic0	at isa? irq 0 port 0x3e0 iomem 0xd0000
>># device		pcic1	at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
>>
>># Serial (COM) ports
>>device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
>>device		sio1	at isa? port IO_COM2 irq 3
>>device		sio2	at isa? disable port IO_COM3 irq 5
>>device		sio3	at isa? disable port IO_COM4 irq 9
>>
>># Parallel port
>>device		ppc0	at isa? irq 7
>>device		ppbus		# Parallel port bus (required)
>>device		lpt		# Printer
>># device		plip		# TCP/IP over parallel
>>device		ppi		# Parallel port interface device
>># device		vpo		# Requires scbus and da
>>
>>
>># PCI Ethernet NICs.
>># device		de		# DEC/Intel DC21x4x (``Tulip'')
>>device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
>># device		tx		# SMC 9432TX (83c170 ``EPIC'')
>>device		vx		# 3Com 3c590, 3c595 (``Vortex'')
>># device		wx	# Intel Gigabit Ethernet Card (``Wiseman'')
>>
>># PCI Ethernet NICs that use the common MII bus controller code.
>># NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
>>device		miibus		# MII bus support
>>device		dc		# DEC/Intel 21143 and various workalikes
>># device		pcn		# AMD Am79C79x PCI 10/100 NICs
>># device		rl		# RealTek 8129/8139
>># device		sf		# Adaptec AIC-6915 (``Starfire'')
>># device		sis	# Silicon Integrated Systems SiS 900/SiS 7016
>># device		ste		# Sundance ST201 (D-Link DFE-550TX)
>># device		tl		# Texas Instruments ThunderLAN
>># device		vr		# VIA Rhine, Rhine II
>># device		wb		# Winbond W89C840F
>>device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')
>>
>># ISA Ethernet NICs.
>># device		ed0	at isa? port 0x280 irq 10 iomem 0xd8000
>># device		ex
>># device		ep
>># device		fe0	at isa? port 0x300
>># WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
>># exists only as a PCMCIA device, so there is no ISA attatement needed
>># and resources will always be dynamically assigned by the pccard code.
>># device		wi
>># Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
>># work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
>># mode (the factory default). If you set the switches on your ISA
>># card for a manually chosen I/O address and IRQ, you must specify
>># those paremeters here.
>># device		an
>># Xircom Ethernet
>># device		xe
>># The probe order of these is presently determined by i386/isa/isa_compat.c.
>># device		ie0	at isa? port 0x300 irq 10 iomem 0xd0000
>># device		le0	at isa? port 0x300 irq 5 iomem 0xd0000
>># device		lnc0	at isa? port 0x280 irq 10 drq 0
>># device		cs0	at isa? port 0x300
>># device		sn0	at isa? port 0x300 irq 10
>>
>># Pseudo devices - the number indicates how many units to allocated.
>>pseudo-device	loop		# Network loopback
>>pseudo-device	ether		# Ethernet support
>># pseudo-device	sl	1	# Kernel SLIP
>># pseudo-device	ppp	1	# Kernel PPP
>># pseudo-device	tun		# Packet tunnel.
>>pseudo-device	pty		# Pseudo-ttys (telnet etc)
>>pseudo-device	md		# Memory "disks"
>>pseudo-device	gif	4	# IPv6 and IPv4 tunneling
>>pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)
>>
>># The `bpf' pseudo-device enables the Berkeley Packet Filter.
>># Be aware of the administrative consequences of enabling this!
>>pseudo-device	bpf		#Berkeley packet filter
>>
>># USB support
>># device		uhci		# UHCI PCI->USB interface
>># device		ohci		# OHCI PCI->USB interface
>>device		usb		# USB Bus (required)
>>device		ugen		# Generic
>>device		uhid		# "Human Interface Devices"
>>device		ukbd		# Keyboard
>>device		ulpt		# Printer
>># device	umass		# Disks/Mass storage - Requires scbus and da
>>device		ums		# Mouse
>># device		uscanner	# Scanners
>># USB Ethernet, requires mii
>># device		aue		# ADMtek USB ethernet
>># device		cue		# CATC USB ethernet
>># device		kue		# Kawasaki LSI USB ethernet
>>
> >_____________________________________________________________ >========GET YOUR FREE E-MAIL============ >http://freemail.cahostnet.net >Web Hosting http://www.cahostnet.com > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message _____________________________________________________________ ========GET YOUR FREE E-MAIL============ http://freemail.cahostnet.net Web Hosting http://www.cahostnet.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message