From owner-freebsd-current Sun Sep 20 14:22:59 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id OAA09711 for freebsd-current-outgoing; Sun, 20 Sep 1998 14:22:59 -0700 (PDT) (envelope-from owner-freebsd-current@FreeBSD.ORG) Received: from magnet.geophysik.tu-freiberg.de (magnet.geophysik.tu-freiberg.de [139.20.128.6]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id OAA09702 for ; Sun, 20 Sep 1998 14:22:49 -0700 (PDT) (envelope-from freebsd@magnet.geophysik.tu-freiberg.de) Received: (from freebsd@localhost) by magnet.geophysik.tu-freiberg.de (8.9.1/8.7.3) id RAA08115 for freebsd-current@freebsd.org; Sun, 20 Sep 1998 17:43:03 +0200 (CEST) From: Holm Tiffe Message-Id: <199809201543.RAA08115@magnet.geophysik.tu-freiberg.de> Subject: CAM big Problems, disk disappeared ! To: freebsd-current@FreeBSD.ORG Date: Sun, 20 Sep 1998 17:43:02 +0200 (CEST) Reply-To: freebsd@magnet.geophysik.tu-freiberg.de X-Mailer: ELM [version 2.4ME+ PL26 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, first please excuse my broken english, neverthless I'll try to explain my problem: Today I've upgraded my -current to an -current a.out system (cvs-cur.4662). The build and install went smoothly, no problems so far, but when I boot the new kernel (with CAM now) I get lots of errors on the console; here comes the dmesg.boot file: Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-BETA #1: Sun Sep 20 21:57:25 MET DST 1998 holm@unicorn.pppnet.tu-freiberg.de:/usr/src/sys/compile/UNICORN Timecounter "i8254" frequency 1193179 Hz cost 3581 ns Timecounter "TSC" frequency 99999257 Hz cost 232 ns CPU: Pentium/P54C (100.00-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x525 Stepping=5 Features=0x3bf real memory = 67108864 (65536K bytes) avail memory = 62889984 (61416K bytes) eisa0: Probing for devices on the EISA bus ahc0: at 0x2c00-0x2cff irq 15 on eisa0 slot 2 ahc0: aic7770 <= Rev C, Twin Channel, A SCSI Id=7, B SCSI Id=7, 4/255 SCBs Probing for devices on PCI bus 0: chip0: rev 0x11 on pci0.0.0 chip1: rev 0x04 on pci0.2.0 vga0: rev 0x00 int a irq 0 on pci0.5.0 de0: rev 0x23 int a irq 10 on pci0.6.0 de0: Cogent 21040 [10Mb/s] pass 2.3 de0: address 00:00:92:90:09:8d Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16450 sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16450 dgb0: PC/Xe 64K dgb0 at 0x300-0x303 maddr 0xd0000 msize 65536 on isa dgb0: 8 ports lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface psm0 at 0x60-0x64 irq 12 on motherboard psm0: model Generic PS/2 mouse, device ID 0 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fd0: 1.44MB 3.5in fd1: 1.2MB 5.25in npx0 on motherboard npx0: INT 16 interface de0: enabling AUI/BNC port Intel Pentium F00F detected, installing workaround (probe9:ahc0:1:2:0): Sending SDTR!! ahc0:A:2: no active SCB for reconnecting target - issuing BUS DEVICE RESET SAVED_TCL == 0x20, ARG_1 == 0x2, SEQ_FLAGS == 0x0 ahc0: Bus Device Reset on A:2. 1 SCBs aborted (probe9:ahc0:1:2:0): SCB 0x9 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0 SEQADDR == 0x8 SSTAT1 == 0xa (probe9:ahc0:1:2:0): Queuing a BDR SCB (probe9:ahc0:1:2:0): Bus Device Reset Message Sent (probe9:ahc0:1:2:0): no longer in timeout, status = 34b ahc0: Bus Device Reset on B:2. 1 SCBs aborted ahc0:A:2: no active SCB for reconnecting target - issuing BUS DEVICE RESET SAVED_TCL == 0x20, ARG_1 == 0xff, SEQ_FLAGS == 0x0 (probe9:ahc0:1:2:0): SCB 0x9 - timed out in datain phase, SCSISIGI == 0x54 SEQADDR == 0x159 SSTAT1 == 0x2 (probe9:ahc0:1:2:0): BDR message in message buffer (probe9:ahc0:1:2:0): SCB 0x9 - timed out in datain phase, SCSISIGI == 0x54 SEQADDR == 0x159 SSTAT1 == 0x2 (probe9:ahc0:1:2:0): no longer in timeout, status = 34b ahc0: Issued Channel B Bus Reset. 1 SCBs aborted ahc0:A:2: no active SCB for reconnecting target - issuing BUS DEVICE RESET SAVED_TCL == 0x20, ARG_1 == 0xff, SEQ_FLAGS == 0x0 (probe9:ahc0:1:2:0): SCB 0x9 - timed out in datain phase, SCSISIGI == 0x54 SEQADDR == 0x159 SSTAT1 == 0x2 (probe9:ahc0:1:2:0): BDR message in message buffer (probe9:ahc0:1:2:0): SCB 0x9 - timed out in datain phase, SCSISIGI == 0x54 SEQADDR == 0x159 SSTAT1 == 0x2 (probe9:ahc0:1:2:0): no longer in timeout, status = 34b ahc0: Issued Channel B Bus Reset. 1 SCBs aborted ahc0:A:2: no active SCB for reconnecting target - issuing BUS DEVICE RESET SAVED_TCL == 0x20, ARG_1 == 0xff, SEQ_FLAGS == 0x0 (probe9:ahc0:1:2:0): SCB 0x9 - timed out in datain phase, SCSISIGI == 0x54 SEQADDR == 0x159 SSTAT1 == 0x2 (probe9:ahc0:1:2:0): BDR message in message buffer (probe9:ahc0:1:2:0): SCB 0x9 - timed out in datain phase, SCSISIGI == 0x54 SEQADDR == 0x159 SSTAT1 == 0x2 (probe9:ahc0:1:2:0): no longer in timeout, status = 34b ahc0: Issued Channel B Bus Reset. 1 SCBs aborted ahc0:A:2: no active SCB for reconnecting target - issuing BUS DEVICE RESET SAVED_TCL == 0x20, ARG_1 == 0xff, SEQ_FLAGS == 0x0 (probe9:ahc0:1:2:0): SCB 0x9 - timed out in datain phase, SCSISIGI == 0x54 SEQADDR == 0x159 SSTAT1 == 0x2 (probe9:ahc0:1:2:0): BDR message in message buffer (probe9:ahc0:1:2:0): SCB 0x9 - timed out in datain phase, SCSISIGI == 0x54 SEQADDR == 0x159 SSTAT1 == 0x2 (probe9:ahc0:1:2:0): no longer in timeout, status = 34b ahc0: Issued Channel B Bus Reset. 1 SCBs aborted sa0 at ahc0 bus 1 target 3 lun 0 sa0: Removable Sequential Access SCSI2 device sa0: 3.300MB/s transfers changing root device to da1s1a da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI1 device da0: 3.676MB/s transfers (3.676MHz, offset 8) da0: 203MB (415872 512 byte sectors: 64H 32S/T 203C) da1 at ahc0 bus 0 target 2 lun 0 da1: Fixed Direct Access SCSI2 device da1: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled da1: 2048MB (4194304 512 byte sectors: 64H 32S/T 2048C) cd0 at ahc0 bus 0 target 4 lun 0 cd0: Removable CD-ROM SCSI2 device cd0: 4.32MB/s transfers (4.32MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present WARNING: / was not properly dismounted. This machine is an old double P5 (ASUS P54NP4) PCI/EISA with an Adaptec 2740 revision before E on EISA, and was rock solid before. here comes a cut from /var/log/messages with the old kernel: Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-CURRENT #0: Thu Sep 3 11:05:24 MET DST 1998 root@unicorn.pppnet.tu-freiberg.de:/usr/src/sys/compile/UNICORN Timecounter "i8254" frequency 1205101 Hz cost 3536 ns Timecounter "TSC" frequency 99998521 Hz cost 226 ns CPU: Pentium/P54C (100.00-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x525 Stepping=5 Features=0x3bf real memory = 67108864 (65536K bytes) avail memory = 62971904 (61496K bytes) eisa0: Probing for devices on the EISA bus ahc0: at 0x2c00-0x2cff irq 15 on eisa0 slot 2 ahc0: aic7770 <= Rev C, Twin Channel, A SCSI Id=7, B SCSI Id=7, 4 SCBs scbus0 at ahc0 bus 0 sd0 at scbus0 target 0 lun 0 sd0: type 0 fixed SCSI 1 sd0: Direct-Access 203MB (415872 512 byte sectors) sd1 at scbus0 target 2 lun 0 sd1: type 0 fixed SCSI 2 sd1: Direct-Access 2048MB (4194304 512 byte sectors) cd0 at scbus0 target 4 lun 0 cd0: type 5 removable SCSI 2 cd0: CD-ROM can't get the size scbus1 at ahc0 bus 1 sd2 at scbus1 target 2 lun 0 sd2: type 0 fixed SCSI 2 sd2: Direct-Access 1910MB (3912172 512 byte sectors) st0 at scbus1 target 3 lun 0 st0: type 1 removable SCSI 2 st0: Sequential-Access density code 0x0, drive empty Probing for devices on PCI bus 0: chip0: rev 0x11 on pci0.0.0 chip1: rev 0x04 on pci0.2.0 vga0: rev 0x00 int a irq 0 on pci0.5.0 de0: rev 0x23 int a irq 10 on pci0.6.0 de0: Cogent 21040 [10Mb/s] pass 2.3 de0: address 00:00:92:90:09:8d Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16450 sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16450 dgb0: PC/Xe 64K dgb0 at 0x300-0x303 maddr 0xd0000 msize 65536 on isa dgb0: 8 ports lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface psm0 at 0x60-0x64 irq 12 on motherboard psm0: model Generic PS/2 mouse, device ID 0 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fd0: 1.44MB 3.5in fd1: 1.2MB 5.25in npx0 on motherboard npx0: INT 16 interface de0: enabling AUI/BNC port Intel Pentium F00F detected, installing workaround changing root device to sd1s1a and the kernel config file: # # UNICORN # # machine "i386" cpu "I586_CPU" ident UNICORN maxusers 20 options INET #InterNETworking options FFS #Berkeley Fast Filesystem #options SOFTUPDATES options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 options UCONSOLE #Allow users to grab the console options SYSVSHM options SYSVSEM options SYSVMSG options "SHMMAX=16777216" options "SHMSEG=32" options "SHMMNI=128" options "SHMALL=4096" options KTRACE options "AUTO_EOI_2" options "AHC_ALLOW_MEMIO" options "CLK_CALIBRATION_LOOP" options "CLK_USE_I8254_CALIBRATION" options "CLK_USE_TSC_CALIBRATION" options PQ_LARGECACHE #options DDB options "NDGBPORTS=8" options "VM86" config kernel root on sd1 controller isa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 controller eisa0 controller ahc0 controller scbus0 at ahc0 bus 0 controller scbus1 at ahc0 bus 1 device sd0 at scbus0 target 0 device sd1 at scbus0 target 2 device sd2 at scbus1 target 2 device st0 at scbus1 target 3 device st1 device cd0 at scbus0 target 4 # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1 #options XSERVER # include code for XFree86 device npx0 at isa? port "IO_NPX" irq 13 vector npxintr device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device dgb0 at isa? tty port 0x300 iomem 0xd0000 iosiz ? flags 0x0 device lpt0 at isa? port? tty irq 7 vector lptintr device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr device de0 pseudo-device loop pseudo-device ether pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 64 pseudo-device gzip # Exec gzipped a.out's pseudo-device bpfilter 4 # Berkeley Packet Filter pseudo-device vn 2 # Vnode Driver ... this was working fine. The old fullheigth 5,1/4" HP disk is disappeared now, even an < camcontrol rescan 1> could'nt bring back my /home !!! After that rescan the entire machnie hangs, und must be reseted to bring it back again. Has this something to do with the SCB-pagings that I could'nt enable with the old drivers ? PLEASE Help, Holm -- ******************************************************************************* * Holm Tiffe holm@geophysik.tu-freiberg.de * * Freiberger Strasse 24 * * 09600 Kleinschirma, Germany Microsoft is not the Answer - * * Tel.: 49 3731 74233 Microsoft is the Question, * * UUCP: 49 3731 73719 unicorn!holm and the Answer is no ! * ******************************************************************************* To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message