From owner-freebsd-questions Mon Jul 14 22:46:44 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id WAA07161 for questions-outgoing; Mon, 14 Jul 1997 22:46:44 -0700 (PDT) Received: from gdi.uoregon.edu (gdi.uoregon.edu [128.223.186.38]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id WAA07155 for ; Mon, 14 Jul 1997 22:46:42 -0700 (PDT) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.5/8.8.5) with SMTP id WAA00837; Mon, 14 Jul 1997 22:46:38 -0700 (PDT) Date: Mon, 14 Jul 1997 22:46:38 -0700 (PDT) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: FIBER2 Guy Yaniv 5302 cc: FreeBSD Questions Subject: Re: Help needed installing FreeBSD In-Reply-To: <33CAFE46.45AC@telrad.co.il> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Tue, 15 Jul 1997, FIBER2 Guy Yaniv 5302 wrote: > THIS MESSAGE IS ADDRESSED TO SOMEONE WHO CAN HELP WITH FREEBSD > INSTALLATION !!! questions@freebsd.org is the mailing list you want, which you've reached here. > The problem is, that I have an old i486 CPU on 486 VLB motherboard and a > 2.1GB hard drive. No problem! I've got a 486/25sx running as our web/ftp/whatever server for ResNet and it rocks right along. :) > Whenever I try to install the FreeBSD (I do it with novice install as I > am not an expert, yet), it seems that everything is going quite OK and > at the end the system reboots itself. > > After reboot the system is halted and this is the message I get: > > Boot: > dosdev=80, biosdrive=0, unit=0, maj=0 > Error:C:1027 > 1023 (BIOS limit) Okay, your problem is that you've installed your kernel over the 1024 cylinder BIOS limit. Many older PC BIOSs can't boot anything that exceeds 1024 cylinders, approxmiately 500mb. The entire root partition must land within this 500mb limit. After that, things can be anywhere. There are a few ways to rememdy this: 1. Move your FreeBSD slice forward in the drive. If you have DOS on this disk, make an extended partition at the end of the disk and put your data there, since you won't need to be booting that. Make a small primary partition to hold the OS. Put your FreeBSD slice in the middle and you should be okay. 2. If you can figure out how to do it, you can make two FreeBSD slices, one below the limit which holds root and the rest which holds the rest of the system data. This requires some manual tweaking and I'm not sure how to do it using sysinstall. > So, I've re-partitioned the drive to several 480MB slices, but still it > doesn't help. If I could see a map of your drive, I could get a better idea of how far you're off. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major Spam routed to /dev/null by Procmail | Death to Cyberpromo