From owner-freebsd-current@FreeBSD.ORG Sun Sep 5 22:28:04 2004 Return-Path: Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 722DD16A4CE for ; Sun, 5 Sep 2004 22:28:04 +0000 (GMT) Received: from crumpet.united-ware.com (ddsl-66-42-172-210.fuse.net [66.42.172.210]) by mx1.FreeBSD.org (Postfix) with ESMTP id E12B943D41 for ; Sun, 5 Sep 2004 22:28:02 +0000 (GMT) (envelope-from mistry.7@osu.edu) Received: from [192.168.1.102] (ddsl-66-42-172-210.fuse.net [66.42.172.210]) (authenticated bits=0)i85MEXjr023162 (version=TLSv1/SSLv3 cipher=RC4-MD5 bits=128 verify=NO) for ; Sun, 5 Sep 2004 18:14:34 -0400 (EDT) (envelope-from mistry.7@osu.edu) From: Anish Mistry To: freebsd-current@freebsd.org Date: Sun, 5 Sep 2004 18:29:52 -0400 User-Agent: KMail/1.6.2 MIME-Version: 1.0 Content-Type: multipart/signed; protocol="application/pgp-signature"; micalg=pgp-sha1; boundary="Boundary-02=_oN5OBooXw3BNWiT"; charset="us-ascii" Content-Transfer-Encoding: 7bit Message-Id: <200409051830.00656.mistry.7@osu.edu> X-Spam-Status: No, hits=4.5 required=5.0 tests=J_CHICKENPOX_35,J_CHICKENPOX_41,J_CHICKENPOX_43, J_CHICKENPOX_51,J_CHICKENPOX_61,PGP_SIGNATURE_2, RCVD_IN_ORBS,RCVD_IN_OSIRUSOFT_COM,USER_AGENT_KMAIL, X_OSIRU_OPEN_RELAY version=2.55 X-Spam-Level: **** X-Spam-Checker-Version: SpamAssassin 2.55 (1.174.2.19-2003-05-19-exp) Subject: USB umass panic X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 05 Sep 2004 22:28:04 -0000 --Boundary-02=_oN5OBooXw3BNWiT Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline I'm getting the following panic when I plugged/unplugged in my usb camera f= or=20 the first time. =20 Repeat: 1) plug in camera while on 2) unplug a few seconds later 3) panic (hand transcribed, must get firewire debugging equipment): umass0: at uhub0 port 1 (addr 2) disconnected =46atal trap 12: page fault while in kernel mode fault virtual address =3D 0xdeadc0de fault code =3D supervisor read, page not present instruction pointer =3D 0x8:0xc072327b stack pointer =3D 0x10:0xcb2c0c0c frame pointer =3D 0x10:0xcb2c0c3c code segment =3D base 0x0, limit 0xfffff, type 0x1b =3D DPL 0, pres 1, def32 1, gran 1 processor eflags =3D interrupt enabled, resume, IOPL =3D 0 current process =3D 22 (irq11: ohci0) [thread 100019] Stopped at ohci_device_request+0xdf: movl 0(%edx),%ecx db> trace ohci_device_request(c16bd200,c16bd200,c16d8700,cb2c0c64,c071aa03) at=20 ohci_device_request+0xdf ohci_device_ctrl_start(c16bd200,c116b400,c16d8700,cb2c0c8c,c071a962) at=20 ohci_device_ctrl_start+0x23 usbd_start_next(c16d8700,0,0,0,c116b43c) at usbd_start_next+0x37 usb_transfer_complete(c116b400,5,c16d8700,0,0) at usb_transfer_complete+0x1= c2 ohci_softint(c1143000,c1143000,cb2c0ce8,c07227b6,c1143000) at=20 ohci_softintr+0x238 usb_schedsoftintr(c1143000,c1143000,a651f30,c116ac00,c10b1780) at=20 usb_schedsoftintr+0x2f ohci_intr1(c1143000,cd2c0d1c,c049f1c6,c1143000,0) at ohci_intr1+0x1aa ohci_intr(c1143000,0,1372,c10bde00,0) at ohci_intr+0x30 ithread_loop(c10b1780,cb2c0d48,c10b1780,c049f044,0) at othread_loop+0x182 fork_exit(c049f044,c10b1780,cb2c0d48) at fork_exit+0x7e fork_trampoline() at fork_trampoline+0x8 =2D-- trap 0x1, eip =3D 0, esp =3D 0xcb2c0d7c, ebp =3D 0 --- Also after about a minute or two of just having the camera plugged into the= =20 USB slot, the whole system just hard locks. Repeat: 1) plug in camera while on 2) wait about a minute 3) system freezes, needs a hard reset Dmesg: 6-CURRENT as of 2004-09-04 real memory =3D 251527168 (239 MB) avail memory =3D 240635904 (229 MB) Crusoe LongRun support enabled, current mode: 2 <867MHz 1300mV 100%> npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: Power Button (fixed) acpi_ec0: port 0x66,0x62 on acpi0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xff08-0xff0b on acpi0 cpu0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 acpi link get: empty IRQ resource acpi link get: empty IRQ resource pci0: on pcib0 pci0: at device 0.1 (no driver attached) pci0: at device 0.2 (no driver attached) ohci0: mem 0xfc004000-0xfc004ff= f=20 irq 11 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered umass0: Sony Sony DSC, rev 2.00/5.00, addr 2 umass0: RBC over CBI; quirks =3D 0x0000 umass0:0:0:-1: Attached to scbus0 pcm0: port 0x1000-0x10ff mem 0xfc005000-0xfc005fff irq 9 = at=20 device 4.0 on pci0 pcm0: pcm0: [GIANT-LOCKED] pci0: at device 6.0 (no driver attached) isab0: at device 7.0 on pci0 isa0: on isab0 pci0: at device 12.0 (no driver attached) atapci0: port=20 0x1800-0x180f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.0 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 rl0: port 0x8000-0x80ff mem 0xfc007800-0xfc0078= ff=20 irq 9 at device 16.0 on pci0 miibus0: on rl0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:e0:00:ae:45:08 fwohci0: mem=20 0xfc000000-0xfc003fff,0xfc007000-0xfc0077ff irq 9 at device 19.0 on pci0 fwohci0: OHCI version 1.10 (ROM=3D0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:00:0e:10:00:b0:29:d0 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwohci0: Initiate bus reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) acpi_video0: port 0x1400-0x14ff mem=20 0xfc006000-0xfc006fff,0xfd000000-0xfdffffff irq 9 at device 20.0 on pci0 acpi_button0: on acpi0 acpi_acad0: on acpi0 acpi_cmbat0: on acpi0 acpi_cmbat1: on acpi0 acpi_lid0: on acpi0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: flags 0x3000 irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 acpi_fuji0: on acpi0 pmtimer0 on isa0 orm0: at iomem 0xd0000-0xd0fff,0xc0000-0xcffff on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=3D0x200> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 859336442 Hz quality 800 Timecounters tick every 0.976 msec cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_acad0: acline initialization start acpi_acad0: Off Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_cmbat1: battery initialization start ad0: 19077MB [38760/16/63] at ata0-master UDMA66 ATAPI_RESET time =3D 50us acd0: CDRW at ata1-master PIO4 umass0: CBI reset failed, IOERROR umass0: CBI bulk-in stall clear failed, IOERROR umass0: at uhub0 port 1 (addr 2) disconnected umass0: CBI bulk-out stall clear failed, IOERROR =46atal trap 12: page fault while in kernel mode fault virtual address =3D 0xdeadc116 fault code =3D supervisor write, page not present instruction pointer =3D 0x8:0xc0432875 stack pointer =3D 0x10:0xcb2abc6c frame pointer =3D 0x10:0xcb2abcf4 code segment =3D base 0x0, limit 0xfffff, type 0x1b =3D DPL 0, pres 1, def32 1, gran 1 processor eflags =3D interrupt enabled, resume, IOPL =3D 0 current process =3D 35 (swi3: cambio) Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 6.0-CURRENT #16: Sun Sep 5 02:12:29 EDT 2004 root@littleguy:/usr/obj/usr/src/sys/LITTLEGUY Preloaded elf kernel "/boot/kernel/kernel" at 0xc07c2000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc07c2250. Preloaded elf module "/boot/kernel/snd_t4dwave.ko" at 0xc07c22fc. Preloaded elf module "/boot/kernel/sound.ko" at 0xc07c23ac. Preloaded elf module "/boot/kernel/ukbd.ko" at 0xc07c2458. Preloaded elf module "/boot/kernel/usb.ko" at 0xc07c2504. Preloaded elf module "/boot/kernel/ums.ko" at 0xc07c25ac. Preloaded elf module "/boot/kernel/umass.ko" at 0xc07c2654. Preloaded elf module "/boot/kernel/acpi_video.ko" at 0xc07c2700. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07c27b0. Preloaded elf module "/boot/kernel/acpi_fuji.ko" at 0xc07c285c. Preloaded elf module "/boot/kernel/firewire.ko" at 0xc07c290c. Calibrating clock(s) ... i8254 clock: 1193129 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 859335780 Hz CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 (859.34-MHz 586-class CPU) Origin =3D "GenuineTMx86" Id =3D 0x543 Stepping =3D 3 Features=3D0x80893f Processor revision 1.4.1.0 Code Morphing Software revision 4.3.0-9-197 20020207 23:55 official release 4.3.0#7 real memory =3D 251527168 (239 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000826000 - 0x000000000eb77fff, 238362624 bytes (58194 pages) avail memory =3D 240635904 (229 MB) Crusoe LongRun support enabled, current mode: 1 <867MHz 1300mV 100%> bios32: Found BIOS32 Service Directory header at 0xc00f6f90 bios32: Entry =3D 0xfd770 (c00fd770) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xfd770+0x11e pnpbios: Found PnP BIOS data at 0xc00f6fe0 pnpbios: Entry =3D f0000:9528 Rev =3D 1.0 Other BIOS signatures found: null: io: random: mem: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80003074 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D80] is there (id=3D03951279) pcibios: BIOS version 2.10 =46ound $PIR table, 9 entries at 0xc00fdf30 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 2 A 0x59 3 4 5 7 10 11 embedded 0 4 A 0x08 3 4 5 7 9 10 14 15 embedded 0 12 A 0x01 3 4 5 7 9 10 14 15 embedded 0 16 A 0x02 3 4 5 7 9 10 14 15 embedded 0 18 A 0x05 3 4 5 7 9 10 14 15 embedded 0 18 B 0x06 3 4 5 7 9 10 14 15 embedded 0 19 A 0x03 3 4 5 7 9 10 14 15 embedded 0 20 A 0x04 3 4 5 7 9 10 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 6 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 6 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 18 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 16 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 12 func 0 acpi0: Power Button (fixed) acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_ec0: port 0x66,0x62 on acpi0 ACPI timer looks BAD min =3D 2, max =3D 815, width =3D 813 ACPI timer looks BAD min =3D 2, max =3D 7, width =3D 5 ACPI timer looks BAD min =3D 2, max =3D 5, width =3D 3 ACPI timer looks BAD min =3D 2, max =3D 7, width =3D 5 ACPI timer looks GOOD min =3D 2, max =3D 4, width =3D 2 ACPI timer looks GOOD min =3D 2, max =3D 4, width =3D 2 ACPI timer looks GOOD min =3D 2, max =3D 4, width =3D 2 ACPI timer looks GOOD min =3D 2, max =3D 4, width =3D 2 ACPI timer looks BAD min =3D 2, max =3D 5, width =3D 3 ACPI timer looks GOOD min =3D 2, max =3D 4, width =3D 2 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xff08-0xff0b on acpi0 cpu0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 acpi link get: empty IRQ resource acpi link get: empty IRQ resource ACPI PCI link initial configuration: \\_SB_.PCI0.EIO_.LNKU irq 0: [ 3 4 5 7 9 10 11] 11+ low,level,sharable= =20 0.2.0 \\_SB_.PCI0.EIO_.LNKH irq 0: [ 3 4 5 7 9 10 11] 9+ low,level,sharable= =20 0.4.0 \\_SB_.PCI0.EIO_.LNKA irq 0: [ 3 4 5 7 9 10 11] 9+ low,level,sharable= =20 0.12.0 \\_SB_.PCI0.EIO_.LNKC irq 0: [ 3 4 5 7 9 10 11] 9+ low,level,sharable= =20 0.19.0 \\_SB_.PCI0.EIO_.LNKD irq 0: [ 3 4 5 7 9 10 11] 9+ low,level,sharable= =20 0.20.0 \\_SB_.PCI0.EIO_.LNKB irq 0: [ 3 4 5 7 9 10 11] 9+ low,level,sharable= =20 0.16.0 \\_SB_.PCI0.EIO_.LNKE irq 0: [ 3 4 5 7 9 10 11] 0+ low,level,sharable= =20 0.18.0 \\_SB_.PCI0.EIO_.LNKF irq 0: [ 3 4 5 7 9 10 11] 0+ low,level,sharable= =20 0.18.1 pci0: on pcib0 pci0: physical bus=3D0 map[10]: type 1, range 32, base fc100000, size 20, enabled found-> vendor=3D0x1279, dev=3D0x0395, revid=3D0x02 bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0006, statreg=3D0x2200, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1279, dev=3D0x0396, revid=3D0x00 bus=3D0, slot=3D0, func=3D1 class=3D05-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1279, dev=3D0x0397, revid=3D0x00 bus=3D0, slot=3D0, func=3D2 class=3D05-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[10]: type 1, range 32, base fc004000, size 12, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.EIO_.LNKU) pcib0: possible interrupts: 3 4 5 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.EIO_.LNKU (references 1, priority 2241): interrupts: 11 10 5 9 7 4 3 penalty: 80 80 130 160 5080 5080 5080 \\_SB_.PCI0.EIO_.LNKH (references 1, priority 2241): interrupts: 11 10 5 9 7 4 3 penalty: 80 80 130 160 5080 5080 5080 \\_SB_.PCI0.EIO_.LNKA (references 1, priority 2241): interrupts: 11 10 5 9 7 4 3 penalty: 80 80 130 160 5080 5080 5080 \\_SB_.PCI0.EIO_.LNKC (references 1, priority 2241): interrupts: 11 10 5 9 7 4 3 penalty: 80 80 130 160 5080 5080 5080 \\_SB_.PCI0.EIO_.LNKD (references 1, priority 2241): interrupts: 11 10 5 9 7 4 3 penalty: 80 80 130 160 5080 5080 5080 \\_SB_.PCI0.EIO_.LNKB (references 1, priority 2241): interrupts: 11 10 5 9 7 4 3 penalty: 80 80 130 160 5080 5080 5080 \\_SB_.PCI0.EIO_.LNKE (references 1, priority 2241): interrupts: 11 10 5 9 7 4 3 penalty: 80 80 130 160 5080 5080 5080 \\_SB_.PCI0.EIO_.LNKF (references 1, priority 2241): interrupts: 11 10 5 9 7 4 3 penalty: 80 80 130 160 5080 5080 5080 pcib0: slot 2 INTA routed to irq 11 via \\_SB_.PCI0.EIO_.LNKU found-> vendor=3D0x10b9, dev=3D0x5237, revid=3D0x03 bus=3D0, slot=3D2, func=3D0 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0017, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x50 (20000 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00001000, size 8, enabled map[14]: type 1, range 32, base fc005000, size 12, enabled pcib0: matched entry for 0.4.INTA (src \\_SB_.PCI0.EIO_.LNKH) pcib0: possible interrupts: 3 4 5 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.EIO_.LNKH (references 1, priority 2334): interrupts: 10 11 5 9 7 4 3 penalty: 160 170 210 320 5160 5160 5160 \\_SB_.PCI0.EIO_.LNKA (references 1, priority 2334): interrupts: 10 11 5 9 7 4 3 penalty: 160 170 210 320 5160 5160 5160 \\_SB_.PCI0.EIO_.LNKC (references 1, priority 2334): interrupts: 10 11 5 9 7 4 3 penalty: 160 170 210 320 5160 5160 5160 \\_SB_.PCI0.EIO_.LNKD (references 1, priority 2334): interrupts: 10 11 5 9 7 4 3 penalty: 160 170 210 320 5160 5160 5160 \\_SB_.PCI0.EIO_.LNKB (references 1, priority 2334): interrupts: 10 11 5 9 7 4 3 penalty: 160 170 210 320 5160 5160 5160 \\_SB_.PCI0.EIO_.LNKE (references 1, priority 2334): interrupts: 10 11 5 9 7 4 3 penalty: 160 170 210 320 5160 5160 5160 \\_SB_.PCI0.EIO_.LNKF (references 1, priority 2334): interrupts: 10 11 5 9 7 4 3 penalty: 160 170 210 320 5160 5160 5160 pcib0: slot 4 INTA routed to irq 9 via \\_SB_.PCI0.EIO_.LNKH found-> vendor=3D0x10b9, dev=3D0x5451, revid=3D0x01 bus=3D0, slot=3D4, func=3D0 class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0003, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x18 (6000 ns) intpin=3Da, irq=3D9 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=3D0x10b9, dev=3D0x7101, revid=3D0x00 bus=3D0, slot=3D6, func=3D0 class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0000, statreg=3D0x0200, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x10b9, dev=3D0x1533, revid=3D0x00 bus=3D0, slot=3D7, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x000f, statreg=3D0x0210, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) powerspec 1 supports D0 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, enabled pcib0: matched entry for 0.12.INTA (src \\_SB_.PCI0.EIO_.LNKA) pcib0: possible interrupts: 3 4 5 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.EIO_.LNKA (references 1, priority 2427): interrupts: 10 11 5 9 7 4 3 penalty: 240 250 290 490 5240 5240 5240 \\_SB_.PCI0.EIO_.LNKC (references 1, priority 2427): interrupts: 10 11 5 9 7 4 3 penalty: 240 250 290 490 5240 5240 5240 \\_SB_.PCI0.EIO_.LNKD (references 1, priority 2427): interrupts: 10 11 5 9 7 4 3 penalty: 240 250 290 490 5240 5240 5240 \\_SB_.PCI0.EIO_.LNKB (references 1, priority 2427): interrupts: 10 11 5 9 7 4 3 penalty: 240 250 290 490 5240 5240 5240 \\_SB_.PCI0.EIO_.LNKE (references 1, priority 2427): interrupts: 10 11 5 9 7 4 3 penalty: 240 250 290 490 5240 5240 5240 \\_SB_.PCI0.EIO_.LNKF (references 1, priority 2427): interrupts: 10 11 5 9 7 4 3 penalty: 240 250 290 490 5240 5240 5240 pcib0: slot 12 INTA routed to irq 9 via \\_SB_.PCI0.EIO_.LNKA found-> vendor=3D0x104c, dev=3D0xac50, revid=3D0x01 bus=3D0, slot=3D12, func=3D0 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0x03 (750 ns) intpin=3Da, irq=3D9 powerspec 1 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 00001800, size 4, enabled found-> vendor=3D0x10b9, dev=3D0x5229, revid=3D0xc3 bus=3D0, slot=3D15, func=3D0 class=3D01-01-fa, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1000 ns) intpin=3Da, irq=3D255 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00008000, size 8, enabled map[14]: type 1, range 32, base fc007800, size 8, enabled pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.EIO_.LNKB) pcib0: possible interrupts: 3 4 5 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.EIO_.LNKC (references 1, priority 2520): interrupts: 10 11 5 9 7 4 3 penalty: 320 330 370 660 5320 5320 5320 \\_SB_.PCI0.EIO_.LNKD (references 1, priority 2520): interrupts: 10 11 5 9 7 4 3 penalty: 320 330 370 660 5320 5320 5320 \\_SB_.PCI0.EIO_.LNKB (references 1, priority 2520): interrupts: 10 11 5 9 7 4 3 penalty: 320 330 370 660 5320 5320 5320 \\_SB_.PCI0.EIO_.LNKE (references 1, priority 2520): interrupts: 10 11 5 9 7 4 3 penalty: 320 330 370 660 5320 5320 5320 \\_SB_.PCI0.EIO_.LNKF (references 1, priority 2520): interrupts: 10 11 5 9 7 4 3 penalty: 320 330 370 660 5320 5320 5320 pcib0: slot 16 INTA routed to irq 9 via \\_SB_.PCI0.EIO_.LNKB found-> vendor=3D0x10ec, dev=3D0x8139, revid=3D0x10 bus=3D0, slot=3D16, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0003, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x20 (8000 ns), maxlat=3D0x40 (16000 n= s) intpin=3Da, irq=3D9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fc007000, size 11, enabled map[14]: type 1, range 32, base fc000000, size 14, enabled pcib0: matched entry for 0.19.INTA (src \\_SB_.PCI0.EIO_.LNKC) pcib0: possible interrupts: 3 4 5 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.EIO_.LNKC (references 1, priority 2612): interrupts: 10 11 5 9 7 4 3 penalty: 400 410 450 830 5400 5400 5400 \\_SB_.PCI0.EIO_.LNKD (references 1, priority 2612): interrupts: 10 11 5 9 7 4 3 penalty: 400 410 450 830 5400 5400 5400 \\_SB_.PCI0.EIO_.LNKE (references 1, priority 2612): interrupts: 10 11 5 9 7 4 3 penalty: 400 410 450 830 5400 5400 5400 \\_SB_.PCI0.EIO_.LNKF (references 1, priority 2612): interrupts: 10 11 5 9 7 4 3 penalty: 400 410 450 830 5400 5400 5400 pcib0: slot 19 INTA routed to irq 9 via \\_SB_.PCI0.EIO_.LNKC found-> vendor=3D0x104c, dev=3D0x8026, revid=3D0x00 bus=3D0, slot=3D19, func=3D0 class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0012, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1000 ns) intpin=3Da, irq=3D9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fd000000, size 24, enabled map[14]: type 4, range 32, base 00001400, size 8, enabled map[18]: type 1, range 32, base fc006000, size 12, enabled pcib0: matched entry for 0.20.INTA (src \\_SB_.PCI0.EIO_.LNKD) pcib0: possible interrupts: 3 4 5 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.EIO_.LNKD (references 1, priority 2705): interrupts: 10 11 5 9 7 4 3 penalty: 480 490 530 1000 5480 5480 5480 \\_SB_.PCI0.EIO_.LNKE (references 1, priority 2705): interrupts: 10 11 5 9 7 4 3 penalty: 480 490 530 1000 5480 5480 5480 \\_SB_.PCI0.EIO_.LNKF (references 1, priority 2705): interrupts: 10 11 5 9 7 4 3 penalty: 480 490 530 1000 5480 5480 5480 pcib0: slot 20 INTA routed to irq 9 via \\_SB_.PCI0.EIO_.LNKD found-> vendor=3D0x1002, dev=3D0x4c52, revid=3D0x64 bus=3D0, slot=3D20, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0087, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x42 (1980 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D9 powerspec 1 supports D0 D1 D2 D3 current D0 pci0: at device 0.1 (no driver attached) pci0: at device 0.2 (no driver attached) ohci0: mem 0xfc004000-0xfc004ff= f=20 irq 11 at device 2.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfc004000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pcm0: port 0x1000-0x10ff mem 0xfc005000-0xfc005fff irq 9 = at=20 device 4.0 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1000 pcm0: pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel = 3D=20 Enhancement pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP pcm0: [GIANT-LOCKED] pcm0: sndbuf_setmap 1c8000, 1000; 0xc1174000 -> 1c8000 pcm0: sndbuf_setmap 1e6000, 1000; 0xc1172000 -> 1e6000 pcm0: sndbuf_setmap e984000, 1000; 0xc1170000 -> e984000 pcm0: sndbuf_setmap e9a2000, 1000; 0xc116e000 -> e9a2000 pcm0: sndbuf_setmap 218000, 1000; 0xc1184000 -> 218000 pci0: at device 6.0 (no driver attached) isab0: at device 7.0 on pci0 isa0: on isab0 pci0: at device 12.0 (no driver attached) atapci0: port=20 0x1800-0x180f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1800 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata0-master: stat=3D0xd0 err=3D0xd0 lsb=3D0xd0 msb=3D0xd0 ata0-master: stat=3D0xd0 err=3D0xd0 lsb=3D0xd0 msb=3D0xd0 ata0-master: stat=3D0xd0 err=3D0xd0 lsb=3D0xd0 msb=3D0xd0 ata0-master: stat=3D0xd0 err=3D0xd0 lsb=3D0xd0 msb=3D0xd0 ata0-master: stat=3D0xd0 err=3D0xd0 lsb=3D0xd0 msb=3D0xd0 ata0-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0-slave: stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata1-master: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata1-slave: stat=3D0x00 err=3D0x04 lsb=3D0x00 msb=3D0x00 ata1: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x4 ata1: [MPSAFE] rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8000 rl0: port 0x8000-0x80ff mem 0xfc007800-0xfc0078= ff=20 irq 9 at device 16.0 on pci0 miibus0: on rl0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached rl0: Ethernet address: 00:e0:00:ae:45:08 rl0: [MPSAFE] fwohci0: mem=20 0xfc000000-0xfc003fff,0xfc007000-0xfc0077ff irq 9 at device 19.0 on pci0 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfc007000 fwohci0: [MPSAFE] fwohci0: OHCI version 1.10 (ROM=3D0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:00:0e:10:00:b0:29:d0 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwohci0: Initiate bus reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) acpi_video0: port 0x1400-0x14ff mem=20 0xfc006000-0xfc006fff,0xfd000000-0xfdffffff irq 9 at device 20.0 on pci0 found CRT monitor(100), detectable by BIOS, head #0 found LCD panel(110), detectable by BIOS, head #0 found TV(200), detectable by BIOS, head #0 acpi_button0: on acpi0 acpi_acad0: on acpi0 acpi_cmbat0: on acpi0 acpi_cmbat1: on acpi0 acpi_lid0: on acpi0 psmcpnp0 irq 12 on acpi0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0047 psm0: flags 0x3000 irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00003000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 acpi_fuji0: on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xd0000-0xd0fff,0xc0000-0xcffff on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=3D0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this=20 adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 e7 7e 4f 4f 82 55 03=20 b4 1f 00 4f 0d 0e 00 00 07 80 92 88 8f 28 1f 8f=20 b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 e7 7e 4f 4f 82 55 03=20 b4 1f 00 4f 0d 0e 00 00 07 80 92 88 8f 28 1f 8f=20 b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sio0 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0 sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 859335780 Hz quality 800 Timecounters tick every 0.976 msec Linux ELF exec handler installed lo0: bpf attached cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_acad0: acline initialization start system power profile changed to 'economy' acpi_acad0: Off Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_cmbat1: battery initialization start ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin ata0-master: setting PIO4 on AcerLabs Aladdin chip ata0-master: setting UDMA66 on AcerLabs Aladdin chip ad0: ATA-5 disk at ata0-master ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA66 GEOM: new disk ad0 ata1-master: pio=3D0x0c wdma=3D0x22 udma=3D0x42 cable=3D80pin ATAPI_RESET time =3D 80us ata1-master: setting PIO4 on AcerLabs Aladdin chip acd0: CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 2755KB/s (2755KB/s), 2048KB buffer, PI= O4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/2/63 s:63 l:10490382 [1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/9/63 s:10490445 l:20964825 [2] f:00 typ:12 s(CHS):1023/255/63 e(CHS):1023/0/63 s:31455270 l:7598745 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 5371075584 end 5371107839 GEOM: Configure ad0s2, start 5371107840 length 10733990400 end 16105098239 GEOM: Configure ad0s3, start 16105098240 length 3890557440 end 19995655679 GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s2b, start 268435456 length 481656832 end 750092287 GEOM: Configure ad0s2c, start 0 length 10733990400 end 10733990399 GEOM: Configure ad0s2d, start 750092288 length 268435456 end 1018527743 GEOM: Configure ad0s2e, start 1018527744 length 268435456 end 1286963199 GEOM: Configure ad0s2f, start 1286963200 length 9447027200 end 10733990399 Mounting root from ufs:/dev/ad0s2a WARNING: / was not properly dismounted start_init: trying /sbin/init WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted /var: mount pending error: blocks 4 files 0 linprocfs registered umass0: Sony Sony DSC, rev 2.00/5.00, addr 2 umass0: RBC over CBI; quirks =3D 0x0000 umass0:0:0:-1: Attached to scbus0 =2D-=20 Anish Mistry --Boundary-02=_oN5OBooXw3BNWiT Content-Type: application/pgp-signature Content-Description: signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (FreeBSD) iD8DBQBBO5NoxqA5ziudZT0RAmIAAKDGJIZEmp479QWmZz80UOucFZ6ZGQCfb5Fg V3nQbVSNNnu6lsuyHssTthM= =X6ai -----END PGP SIGNATURE----- --Boundary-02=_oN5OBooXw3BNWiT--