From owner-freebsd-scsi Thu Nov 26 23:31:30 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id XAA20580 for freebsd-scsi-outgoing; Thu, 26 Nov 1998 23:31:30 -0800 (PST) (envelope-from owner-freebsd-scsi@FreeBSD.ORG) Received: from mail.gtn.com (mail.gtn.com [194.77.0.15]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id XAA20575 for ; Thu, 26 Nov 1998 23:31:27 -0800 (PST) (envelope-from andreas@klemm.gtn.com) Received: (from uucp@localhost) by mail.gtn.com (8.8.6/8.8.6) with UUCP id IAA24196 for scsi@FreeBSD.ORG; Fri, 27 Nov 1998 08:30:06 +0100 (MET) Received: (from andreas@localhost) by klemm.gtn.com (8.9.1/8.9.1) id IAA02144 for scsi@FreeBSD.ORG; Fri, 27 Nov 1998 08:22:02 +0100 (CET) (envelope-from andreas) Message-ID: <19981127082201.A2134@klemm.gtn.com> Date: Fri, 27 Nov 1998 08:22:01 +0100 From: Andreas Klemm To: scsi@FreeBSD.ORG Subject: some timestamps in CAM for syslog missing, is it possible ? Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.93.2i X-Disclaimer: A free society is one where it is safe to be unpopular X-Operating-System: FreeBSD 3.0-CURRENT SMP Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi ! I inserted a new tape into my TDC4222 device. It lasts some seconds, 'til the device has loaded the QIC tape ... I immediately typed in mt retension, and this command seemed to timeout ... Messages: (sa0:ahc0:0:4:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0 SEQADDR == 0xb SSTAT1 == 0xa (sa0:ahc0:0:4:0): Queuing a BDR SCB (sa0:ahc0:0:4:0): Bus Device Reset Message Sent (sa0:ahc0:0:4:0): no longer in timeout, status = 34b ahc0: Bus Device Reset on A:4. 1 SCBs aborted (sa0:ahc0:0:4:0): LOAD UNLOAD. CDB: 1b 0 0 0 3 0 (sa0:ahc0:0:4:0): UNIT ATTENTION asc:29,0 (sa0:ahc0:0:4:0): Power on, reset, or bus device reset occurred (sa0:ahc0:0:4:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0 SEQADDR == 0x8 SSTAT1 == 0xa (sa0:ahc0:0:4:0): Queuing a BDR SCB (sa0:ahc0:0:4:0): Bus Device Reset Message Sent (sa0:ahc0:0:4:0): no longer in timeout, status = 34b ahc0: Bus Device Reset on A:4. 1 SCBs aborted After that I repeated the command ... in the middle of retensioning I got ... (sa0:ahc0:0:4:0): LOAD UNLOAD. CDB: 1b 0 0 0 3 0 (sa0:ahc0:0:4:0): UNIT ATTENTION asc:29,0 (sa0:ahc0:0:4:0): Power on, reset, or bus device reset occurred Well, it's difficult to exactly determine, which message belongs to which action I did on the command line. Is it possible to display timestamps as well ? Andreas /// -- Andreas Klemm http://www.FreeBSD.ORG/~andreas What gives you 90% more speed, for example, in kernel compilation ? http://www.FreeBSD.ORG/~fsmp/SMP/akgraph-a/graph1.html "NT = Not Today" (Maggie Biggs) ``powered by FreeBSD SMP'' To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message