From owner-freebsd-bugs  Wed Mar 18 07:30:12 1998
Return-Path: <owner-freebsd-bugs@FreeBSD.ORG>
Received: (from majordom@localhost)
          by hub.freebsd.org (8.8.8/8.8.8) id HAA27708
          for freebsd-bugs-outgoing; Wed, 18 Mar 1998 07:30:12 -0800 (PST)
          (envelope-from owner-freebsd-bugs@FreeBSD.ORG)
Received: (from gnats@localhost)
          by hub.freebsd.org (8.8.8/8.8.8) id HAA27669;
          Wed, 18 Mar 1998 07:30:07 -0800 (PST)
          (envelope-from gnats)
Received: from our.domaintje.com (our.domaintje.com [194.178.252.9])
          by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id HAA25880
          for <FreeBSD-gnats-submit@freebsd.org>; Wed, 18 Mar 1998 07:19:52 -0800 (PST)
          (envelope-from jos@our.domaintje.com)
Received: from jos@localhost by our.domaintje.com id <8328-180>; Wed, 18 Mar 1998 16:19:55 +0100
Message-Id: <19980318151955Z8328-180+279@our.domaintje.com>
Date: Wed, 18 Mar 1998 16:19:47 +0100
From: jos@our.domaintje.com
Reply-To: jos@our.domaintje.com
To: FreeBSD-gnats-submit@FreeBSD.ORG
X-Send-Pr-Version: 3.2
Subject: misc/6056: de driver support for DS 21143 incomplete in -current
Sender: owner-freebsd-bugs@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org


>Number:         6056
>Category:       misc
>Synopsis:       de driver support for DS 21143 incomplete in -current
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-bugs
>State:          open
>Quarter:
>Keywords:
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Wed Mar 18 07:30:05 PST 1998
>Last-Modified:
>Originator:     Jos Backus
>Organization:
none
>Release:        FreeBSD 3.0-RELEASE i386
>Environment:

	Tulip Vision Line de 5/200 w/ on-board DS 21143-based PCI Ethernet
        controller; media is half-duplex 10BaseT/UTP (on-board)
	FreeBSD -current as of March 10th

>Description:

	After cvsupping 2.2.2-RELEASE to -current, the de driver no longer
        works. No error messages are shown except for **.
        Packets do not seem to be making it onto the cable, as only the
	local interface address can be pinged. Selecting either ``media
	autoselect'' or ``media 10BaseT/UTP'' makes no difference.

	dmesg output:

	de0 <Digital 21143 Fast Ethernet> rev 48 int a irq 10 on pci0:18
        mapreg[10] type=1 addr=0000ec00 size=0080.
        mapreg[14] type=0 addr=fedffc00 size=0080.
        reg16: ioaddr=0xec00 size=0x80
	de0: 21143 [10-100Mb/s] pass 3.0 (invalid EESPROM checksum)	**
	de0: address 00:80:5a:15:e6:9b
	de0: media: 1="10baseT" 2="Full Duplex 10baseT" 3="BNC" 4="100baseTX"
	     5="Full Duplex 100baseTX"
	de0: enabling 10baseT port

	ifconfig output:

de0: flags=8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST> mtu 1500
        inet 131.155.146.107 netmask 0xffffff00 broadcast 131.155.146.255
        ether 00:80:5a:15:e6:9b
        media: 10baseT/UTP status: active
        supported media: autoselect 100baseTX <full-duplex> 100baseTX
        10base2/BNC 10baseT/UTP <full-duplex> 10baseT/UTP
   

>How-To-Repeat:


>Fix:
	
	none known

>Audit-Trail:
>Unformatted:

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message