From owner-freebsd-scsi Wed Dec 30 04:34:29 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id EAA10786 for freebsd-scsi-outgoing; Wed, 30 Dec 1998 04:34:29 -0800 (PST) (envelope-from owner-freebsd-scsi@FreeBSD.ORG) Received: from bayer2.bayer-ag.de (bayer2.bayer-ag.de [194.120.191.2]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id EAA10781 for ; Wed, 30 Dec 1998 04:34:27 -0800 (PST) (envelope-from ANDREAS.KLEMM.AK@bayer-ag.de) From: ANDREAS.KLEMM.AK@bayer-ag.de Received: by bayer2.bayer-ag.de id NAA24231 (SMTP Gateway 3.0 for scsi@freebsd.org); Wed, 30 Dec 1998 13:34:08 +0100 Received: by bayer2.bayer-ag.de (Internal Mail Agent-2); Wed, 30 Dec 1998 13:34:08 +0100 Received: by bayer2.bayer-ag.de (Internal Mail Agent-1); Wed, 30 Dec 1998 13:34:08 +0100 To: " - (052)scsi(a)FreeBSD.ORG" Subject: Can FreeBSD boot from a 18 GB SCSI harddisk ? Message-Id: <0006800007847206000002L062*@MHS> Date: Wed, 30 Dec 1998 13:13:35 +0100 Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by hub.freebsd.org id EAA10782 Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi ! If I*%d plan to get a PII 450 MHz system with an ASUS P2B-S ( or LS) board which contains an AIC 7890 chip on board, could I install FreeBSD on it and would the system run without trouble (could I access all 18 GB) ??? BTW, I just heard this board has 2 SCSI connectors (one 50 and one 68). Does this system have one or two SCSI channels ? Is it then possible, to install an Ultra 2 Wide SCSI Harddisk like the Seagate Cheetah or Barracuda on the wide connector and normal Narrow SCSI Devices like CD-Rom and Tape on the other connector ??? So to say, can I mix 20 MHZ with 80 MHz SCSI devices ??? Andreas /// To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message