From owner-freebsd-acpi@FreeBSD.ORG Thu Apr 6 07:49:50 2006 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 917C516A401 for ; Thu, 6 Apr 2006 07:49:50 +0000 (UTC) (envelope-from fp@netserv1.chg.ru) Received: from netserv1.chg.ru (netserv1.chg.ru [193.233.46.3]) by mx1.FreeBSD.org (Postfix) with ESMTP id 239FE43D45 for ; Thu, 6 Apr 2006 07:49:47 +0000 (GMT) (envelope-from fp@netserv1.chg.ru) Received: from netserv1.chg.ru (localhost.chg.ru [127.0.0.1]) by netserv1.chg.ru (8.13.1/8.13.1) with ESMTP id k367qImo008622 for ; Thu, 6 Apr 2006 11:52:19 +0400 (MSD) (envelope-from fp@netserv1.chg.ru) Received: from localhost (fp@localhost) by netserv1.chg.ru (8.13.1/8.13.1/Submit) with ESMTP id k367qIK2008619 for ; Thu, 6 Apr 2006 11:52:18 +0400 (MSD) (envelope-from fp@netserv1.chg.ru) Date: Thu, 6 Apr 2006 11:52:18 +0400 (MSD) From: Anton Menshutin To: freebsd-acpi@freebsd.org Message-ID: <20060406113433.O6088@netserv1.chg.ru> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed X-Virus-Scanned: ClamAV 0.83/1376/Wed Apr 5 09:51:25 2006 on netserv1.chg.ru X-Virus-Status: Clean Subject: se7520af2 intel motherboard acpi problem X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 06 Apr 2006 07:49:50 -0000 Hi all, We bought new server with se7520af2 intel motherboard with 2 XEONs and found a lot of problems with it under FreeBSD. With ACPI enabled system does not work correctly with pci-express busses, hangs during reboot. With ACPI disabled it sometimes crashes during boot when mounting filesystems from mboard SATA controller, but pci-express based areca raid controller works fine. Depending on verison of the system kernel works only with one or two CPU's (i.e. hyperthreading does not work at all). Below is the dmesg output with acpi enabled: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-BETA2 #0: Thu Mar 30 14:39:56 UTC 2006 root@:/usr/src/sys/amd64/compile/SMP Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8099f000. ACPI APIC Table: Calibrating clock(s) ... i8254 clock: 1193154 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2793014672 Hz CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.01-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0xf43 Stepping = 3 Features=0xbfebfbff Features2=0x641d> AMD Features=0x20000800 Hyperthreading: 2 logical CPUs real memory = 4831838208 (4608 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000a9d000 - 0x00000000d78affff, 3605082112 bytes (880147 pages) 0x0000000100000000 - 0x000000011ffeffff, 536805376 bytes (131056 pages) avail memory = 4126433280 (3935 MB) APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 APIC ID: physical 6, logical 0:2 APIC ID: physical 7, logical 0:3 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 3 APIC: CPU 2 has ACPI ID 2 APIC: CPU 3 has ACPI ID 4 MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec80000 ioapic1: intpin 0 -> PCI IRQ 24 (level, low) ioapic1: intpin 1 -> PCI IRQ 25 (level, low) ioapic1: intpin 2 -> PCI IRQ 26 (level, low) ioapic1: intpin 3 -> PCI IRQ 27 (level, low) ioapic1: intpin 4 -> PCI IRQ 28 (level, low) ioapic1: intpin 5 -> PCI IRQ 29 (level, low) ioapic1: intpin 6 -> PCI IRQ 30 (level, low) ioapic1: intpin 7 -> PCI IRQ 31 (level, low) ioapic1: intpin 8 -> PCI IRQ 32 (level, low) ioapic1: intpin 9 -> PCI IRQ 33 (level, low) ioapic1: intpin 10 -> PCI IRQ 34 (level, low) ioapic1: intpin 11 -> PCI IRQ 35 (level, low) ioapic1: intpin 12 -> PCI IRQ 36 (level, low) ioapic1: intpin 13 -> PCI IRQ 37 (level, low) ioapic1: intpin 14 -> PCI IRQ 38 (level, low) ioapic1: intpin 15 -> PCI IRQ 39 (level, low) ioapic1: intpin 16 -> PCI IRQ 40 (level, low) ioapic1: intpin 17 -> PCI IRQ 41 (level, low) ioapic1: intpin 18 -> PCI IRQ 42 (level, low) ioapic1: intpin 19 -> PCI IRQ 43 (level, low) ioapic1: intpin 20 -> PCI IRQ 44 (level, low) ioapic1: intpin 21 -> PCI IRQ 45 (level, low) ioapic1: intpin 22 -> PCI IRQ 46 (level, low) ioapic1: intpin 23 -> PCI IRQ 47 (level, low) MADT: Found IO APIC ID 10, Interrupt 48 at 0xfec80400 ioapic2: intpin 0 -> PCI IRQ 48 (level, low) ioapic2: intpin 1 -> PCI IRQ 49 (level, low) ioapic2: intpin 2 -> PCI IRQ 50 (level, low) ioapic2: intpin 3 -> PCI IRQ 51 (level, low) ioapic2: intpin 4 -> PCI IRQ 52 (level, low) ioapic2: intpin 5 -> PCI IRQ 53 (level, low) ioapic2: intpin 6 -> PCI IRQ 54 (level, low) ioapic2: intpin 7 -> PCI IRQ 55 (level, low) ioapic2: intpin 8 -> PCI IRQ 56 (level, low) ioapic2: intpin 9 -> PCI IRQ 57 (level, low) ioapic2: intpin 10 -> PCI IRQ 58 (level, low) ioapic2: intpin 11 -> PCI IRQ 59 (level, low) ioapic2: intpin 12 -> PCI IRQ 60 (level, low) ioapic2: intpin 13 -> PCI IRQ 61 (level, low) ioapic2: intpin 14 -> PCI IRQ 62 (level, low) ioapic2: intpin 15 -> PCI IRQ 63 (level, low) ioapic2: intpin 16 -> PCI IRQ 64 (level, low) ioapic2: intpin 17 -> PCI IRQ 65 (level, low) ioapic2: intpin 18 -> PCI IRQ 66 (level, low) ioapic2: intpin 19 -> PCI IRQ 67 (level, low) ioapic2: intpin 20 -> PCI IRQ 68 (level, low) ioapic2: intpin 21 -> PCI IRQ 69 (level, low) ioapic2: intpin 22 -> PCI IRQ 70 (level, low) ioapic2: intpin 23 -> PCI IRQ 71 (level, low) lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic6: Routing NMI -> LINT1 lapic6: LINT1 trigger: edge lapic6: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high lapic7: Routing NMI -> LINT1 lapic7: LINT1 trigger: edge lapic7: LINT1 polarity: high MADT: Ignoring local NMI routed to ACPI CPU 5 MADT: Ignoring local NMI routed to ACPI CPU 6 MADT: Ignoring local NMI routed to ACPI CPU 7 MADT: Ignoring local NMI routed to ACPI CPU 8 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: high ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-47 on motherboard ioapic2 irqs 48-71 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000 wlan: <802.11 Link Layer> null: random: nfslock: pseudo-device mem: io: acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35908086) AcpiOsDerivePciId: bus 9 dev 0 func 0 AcpiOsDerivePciId: bus 2 dev 0 func 2 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) AcpiOsDerivePciId: bus 0 dev 0 func 0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 10 11 12 14 15 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 10 11 12 14 15 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 7 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 7 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 15 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 15 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: on acpi0 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0x410 cpu1: on acpi0 acpi_throttle1: on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 cpu2: on acpi0 acpi_throttle2: on cpu2 acpi_throttle2: failed to attach P_CNT device_attach: acpi_throttle2 attach returned 6 cpu3: on acpi0 acpi_throttle3: on cpu3 acpi_throttle3: failed to attach P_CNT device_attach: acpi_throttle3 attach returned 6 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x3590, revid=0x0c bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3591, revid=0x0c bus=0, slot=0, func=1 class=ff-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3594, revid=0x0c bus=0, slot=1, func=0 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0100, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 MSI supports 2 messages map[10]: type 1, range 32, base fcffe000, size 12, memory disabled pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3595, revid=0x0c bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3597, revid=0x0c bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 pcib0: matched entry for 0.4.INTA pcib0: slot 4 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3599, revid=0x0c bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 pcib0: matched entry for 0.6.INTA pcib0: slot 6 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x359a, revid=0x0c bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 pcib0: matched entry for 0.7.INTA pcib0: slot 7 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24d2, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type 4, range 32, base 0000bc00, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24d4, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=7 map[20]: type 4, range 32, base 0000c000, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x24d7, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[20]: type 4, range 32, base 0000c080, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x24dd, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=15 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base fcfffc00, size 10, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0xc2 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24d0, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x014f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24db, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 0000fc00, size 4, enabled map[24]: type 1, range 32, base 00000000, size 10, enabled found-> vendor=0x8086, dev=0x24d1, revid=0x02 bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0045, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[10]: type 4, range 32, base 0000cc00, size 3, enabled map[14]: type 4, range 32, base 0000c880, size 2, enabled map[18]: type 4, range 32, base 0000c800, size 3, enabled map[1c]: type 4, range 32, base 0000c480, size 2, enabled map[20]: type 4, range 32, base 0000c400, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 18 found-> vendor=0x8086, dev=0x24d3, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 map[20]: type 4, range 32, base 00000540, size 5, enabled pci0: at device 0.1 (no driver attached) pci0: at device 1.0 (no driver attached) pcib1: irq 16 at device 2.0 on pci0 pcib1: secondary bus 9 pcib1: subordinate bus 11 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfea00000-0xfebfffff pcib1: prefetched decode 0xfff00000-0xfffff pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.EPA0 - AE_NOT_FOUND pci9: on pcib1 pci9: physical bus=9 found-> vendor=0x8086, dev=0x0329, revid=0x09 bus=9, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x0326, revid=0x09 bus=9, slot=0, func=1 class=08-00-20, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base feafe000, size 12, enabled pcib1: (null) requested memory range 0xfeafe000-0xfeafefff: good found-> vendor=0x8086, dev=0x032a, revid=0x09 bus=9, slot=0, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x0327, revid=0x09 bus=9, slot=0, func=3 class=08-00-20, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base feaff000, size 12, enabled pcib1: (null) requested memory range 0xfeaff000-0xfeafffff: good pcib2: at device 0.0 on pci9 pcib2: secondary bus 11 pcib2: subordinate bus 11 pcib2: I/O decode 0x0-0x0 pcib2: memory decode 0xfff00000-0xfffff pcib2: prefetched decode 0xfff00000-0xfffff pci11: on pcib2 pci11: physical bus=11 pci9: at device 0.1 (no driver attached) pcib3: at device 0.2 on pci9 pcib3: secondary bus 10 pcib3: subordinate bus 10 pcib3: I/O decode 0xe000-0xefff pcib3: memory decode 0xfeb00000-0xfebfffff pcib3: prefetched decode 0xfff00000-0xfffff pci10: on pcib3 pci10: physical bus=10 found-> vendor=0x8086, dev=0x1079, revid=0x03 bus=10, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base feba0000, size 17, enabled pcib3: (null) requested memory range 0xfeba0000-0xfebbffff: good pcib1: (null) requested memory range 0xfeba0000-0xfebbffff: good map[20]: type 4, range 32, base 0000e880, size 6, enabled pcib3: (null) requested I/O range 0xe880-0xe8bf: in range pcib1: (null) requested I/O range 0xe880-0xe8bf: in range pcib3: matched entry for 10.4.INTA pcib3: slot 4 INTA hardwired to IRQ 52 found-> vendor=0x8086, dev=0x1079, revid=0x03 bus=10, slot=4, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base febe0000, size 17, enabled pcib3: (null) requested memory range 0xfebe0000-0xfebfffff: good pcib1: (null) requested memory range 0xfebe0000-0xfebfffff: good map[20]: type 4, range 32, base 0000ec00, size 6, enabled pcib3: (null) requested I/O range 0xec00-0xec3f: in range pcib1: (null) requested I/O range 0xec00-0xec3f: in range pcib3: matched entry for 10.4.INTB pcib3: slot 4 INTB hardwired to IRQ 53 em0: port 0xe880-0xe8bf mem 0xfeba0000-0xfebbffff irq 52 at device 4.0 on pci10 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfeba0000 em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0xe880 em0: [MPSAFE] em0: bpf attached em0: Ethernet address: 00:07:e9:32:d2:1e em0: Speed:N/A Duplex:N/A em1: port 0xec00-0xec3f mem 0xfebe0000-0xfebfffff irq 53 at device 4.1 on pci10 em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfebe0000 em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0xec00 em1: [MPSAFE] em1: bpf attached em1: Ethernet address: 00:07:e9:32:d2:1f em1: Speed:N/A Duplex:N/A pci9: at device 0.3 (no driver attached) pcib4: irq 16 at device 4.0 on pci0 pcib4: secondary bus 6 pcib4: subordinate bus 8 pcib4: I/O decode 0x0-0x0 pcib4: memory decode 0xfe900000-0xfe9fffff pcib4: prefetched decode 0xfbc00000-0xfbffffff pci6: on pcib4 pci6: physical bus=6 found-> vendor=0x8086, dev=0x0370, revid=0x00 bus=6, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x0372, revid=0x00 bus=6, slot=0, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) pcib5: at device 0.0 on pci6 pcib5: secondary bus 8 pcib5: subordinate bus 8 pcib5: I/O decode 0xf000-0xfff pcib5: memory decode 0xfe900000-0xfe9fffff pcib5: prefetched decode 0xfbc00000-0xfbffffff device_attach: pcib5 attach returned 6 pcib6: at device 0.2 on pci6 pcib6: secondary bus 7 pcib6: subordinate bus 7 pcib6: I/O decode 0x0-0x0 pcib6: memory decode 0xfff00000-0xfffff pcib6: prefetched decode 0xfff00000-0xfffff device_attach: pcib6 attach returned 6 pcib7: irq 16 at device 6.0 on pci0 pcib7: secondary bus 3 pcib7: subordinate bus 5 pcib7: I/O decode 0x0-0x0 pcib7: memory decode 0xfe800000-0xfe8fffff pcib7: prefetched decode 0xfb800000-0xfbbfffff pci3: on pcib7 pci3: physical bus=3 found-> vendor=0x8086, dev=0x0370, revid=0x00 bus=3, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x0372, revid=0x00 bus=3, slot=0, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) pcib8: at device 0.0 on pci3 pcib8: secondary bus 5 pcib8: subordinate bus 5 pcib8: I/O decode 0xf000-0xfff pcib8: memory decode 0xfe800000-0xfe8fffff pcib8: prefetched decode 0xfb800000-0xfbbfffff device_attach: pcib8 attach returned 6 pcib9: at device 0.2 on pci3 pcib9: secondary bus 4 pcib9: subordinate bus 4 pcib9: I/O decode 0x0-0x0 pcib9: memory decode 0xfff00000-0xfffff pcib9: prefetched decode 0xfff00000-0xfffff device_attach: pcib9 attach returned 6 pcib10: irq 16 at device 7.0 on pci0 pcib10: secondary bus 2 pcib10: subordinate bus 2 pcib10: I/O decode 0x0-0x0 pcib10: memory decode 0xfff00000-0xfffff pcib10: prefetched decode 0xfff00000-0xfffff pcib10: could not get PCI interrupt routing table for \\_SB_.PCI0.EPC1 - AE_NOT_FOUND pci2: on pcib10 pci2: physical bus=2 uhci0: port 0xbc00-0xbc1f irq 16 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbc00 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xc000-0xc01f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc000 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xc080-0xc09f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc080 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: mem 0xfcfffc00-0xfcffffff irq 23 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfcfffc00 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib11: at device 30.0 on pci0 pcib11: secondary bus 1 pcib11: subordinate bus 1 pcib11: I/O decode 0xd000-0xdfff pcib11: memory decode 0xfd000000-0xfe7fffff pcib11: prefetched decode 0xfff00000-0xfffff pcib11: Subtractively decoded bridge. pci1: on pcib11 pci1: physical bus=1 found-> vendor=0x1002, dev=0x4752, revid=0x27 bus=1, slot=12, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fd000000, size 24, enabled pcib11: (null) requested memory range 0xfd000000-0xfdffffff: good map[14]: type 4, range 32, base 0000d800, size 8, enabled pcib11: (null) requested I/O range 0xd800-0xd8ff: in range map[18]: type 1, range 32, base fe7ff000, size 12, enabled pcib11: (null) requested memory range 0xfe7ff000-0xfe7fffff: good pcib11: matched entry for 1.12.INTA pcib11: slot 12 INTA hardwired to IRQ 17 pci1: at device 12.0 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x7f msb=0x7f ata0: reset tp2 stat0=00 stat1=00 devices=0x4 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] atapci1: port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f irq 18 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc400 atapci1: [MPSAFE] ata2: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcc00 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc880 ata2: reset tp1 mask=01 ostat0=80 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: [MPSAFE] ata3: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc800 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc480 ata3: reset tp1 mask=01 ostat0=7f ostat1=00 ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: reset tp2 stat0=ff stat1=00 devices=0x0 ata3: [MPSAFE] pci0: at device 31.3 (no driver attached) acpi_button0: on acpi0 sio0: irq maps: 0xcca1 0xccb1 0xcca1 0xcca1 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: irq maps: 0xcca1 0xcca9 0xcca1 0xcca1 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0065 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed ex_isa_identify() atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xca7ff,0xca800-0xcb7ff,0xcb800-0xcc7ff on isa0 ppc0: cannot reserve I/O port range ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 233016 -> 100000 procfs registered linprocfs registered lapic: Divisor 2, Frequency 99750200 hz Timecounter "TSC" frequency 2793014672 Hz quality -100 Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff805f53f0, 0) error 6 Linux ELF exec handler installed lo0: bpf attached ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on ICH5 chip acd0: setting UDMA33 on ICH5 chip acd0: DVDROM drive at ata0 as master acd0: read 6890KB/s (6890KB/s), 512KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 190782MB at ata2-master SATA150 ad4: 390721968 sectors [387621C/16H/63S] 16 sectors/interrupt 1 depth queue ad4: Intel check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x06000000 VER: 0x00050014 LDR: 0x04000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x07000000 VER: 0x00050014 LDR: 0x08000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0 ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0 ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0 ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0 ioapic2: routing intpin 4 (PCI IRQ 52) to cluster 0 ioapic2: routing intpin 5 (PCI IRQ 53) to cluster 0 GEOM: new disk ad4 Trying to mount root from ufs:/dev/ad4s1a start_init: trying /sbin/init with acpi disabled : Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-BETA2 #0: Thu Mar 30 14:39:56 UTC 2006 root@:/usr/src/sys/amd64/compile/SMP Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8099f000. Calibrating clock(s) ... i8254 clock: 1193147 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2793016779 Hz CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.02-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0xf43 Stepping = 3 Features=0xbfebfbff Features2=0x641d> AMD Features=0x20000800 Hyperthreading: 2 logical CPUs real memory = 4831838208 (4608 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000a9d000 - 0x00000000d78affff, 3605082112 bytes (880147 pages) 0x0000000100000000 - 0x000000011ffeffff, 536805376 bytes (131056 pages) avail memory = 4126478336 (3935 MB) wlan: <802.11 Link Layer> null: random: nfslock: pseudo-device mem: io: cpu0 on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35908086) pcib0: pcibus 0 on motherboard pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x3590, revid=0x0c bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3591, revid=0x0c bus=0, slot=0, func=1 class=ff-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3594, revid=0x0c bus=0, slot=1, func=0 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0100, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 MSI supports 2 messages map[10]: type 1, range 32, base fcffe000, size 12, memory disabled found-> vendor=0x8086, dev=0x3595, revid=0x0c bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 found-> vendor=0x8086, dev=0x3597, revid=0x0c bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 found-> vendor=0x8086, dev=0x3599, revid=0x0c bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 found-> vendor=0x8086, dev=0x359a, revid=0x0c bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 found-> vendor=0x8086, dev=0x24d2, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type 4, range 32, base 0000bc00, size 5, enabled found-> vendor=0x8086, dev=0x24d4, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=7 map[20]: type 4, range 32, base 0000c000, size 5, enabled found-> vendor=0x8086, dev=0x24d7, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[20]: type 4, range 32, base 0000c080, size 5, enabled found-> vendor=0x8086, dev=0x24dd, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=15 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base fcfffc00, size 10, enabled found-> vendor=0x8086, dev=0x244e, revid=0xc2 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24d0, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x014f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24db, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 0000fc00, size 4, enabled map[24]: type 1, range 32, base 00000000, size 10, enabled found-> vendor=0x8086, dev=0x24d1, revid=0x02 bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0045, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[10]: type 4, range 32, base 0000cc00, size 3, enabled map[14]: type 4, range 32, base 0000c880, size 2, enabled map[18]: type 4, range 32, base 0000c800, size 3, enabled map[1c]: type 4, range 32, base 0000c480, size 2, enabled map[20]: type 4, range 32, base 0000c400, size 4, enabled found-> vendor=0x8086, dev=0x24d3, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 map[20]: type 4, range 32, base 00000540, size 5, enabled pci0: at device 0.1 (no driver attached) pci0: at device 1.0 (no driver attached) pcib1: irq 10 at device 2.0 on pci0 pcib1: secondary bus 9 pcib1: subordinate bus 11 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfea00000-0xfebfffff pcib1: prefetched decode 0xfff00000-0xfffff pci9: on pcib1 pci9: physical bus=9 found-> vendor=0x8086, dev=0x0329, revid=0x09 bus=9, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x0326, revid=0x09 bus=9, slot=0, func=1 class=08-00-20, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base feafe000, size 12, enabled pcib1: (null) requested memory range 0xfeafe000-0xfeafefff: good found-> vendor=0x8086, dev=0x032a, revid=0x09 bus=9, slot=0, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x0327, revid=0x09 bus=9, slot=0, func=3 class=08-00-20, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base feaff000, size 12, enabled pcib1: (null) requested memory range 0xfeaff000-0xfeafffff: good pcib2: at device 0.0 on pci9 pcib2: secondary bus 11 pcib2: subordinate bus 11 pcib2: I/O decode 0x0-0x0 pcib2: memory decode 0xfff00000-0xfffff pcib2: prefetched decode 0xfff00000-0xfffff pci11: on pcib2 pci11: physical bus=11 pci9: at device 0.1 (no driver attached) pcib3: at device 0.2 on pci9 pcib3: secondary bus 10 pcib3: subordinate bus 10 pcib3: I/O decode 0xe000-0xefff pcib3: memory decode 0xfeb00000-0xfebfffff pcib3: prefetched decode 0xfff00000-0xfffff pci10: on pcib3 pci10: physical bus=10 found-> vendor=0x8086, dev=0x1079, revid=0x03 bus=10, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base feba0000, size 17, enabled pcib3: (null) requested memory range 0xfeba0000-0xfebbffff: good pcib1: (null) requested memory range 0xfeba0000-0xfebbffff: good map[20]: type 4, range 32, base 0000e880, size 6, enabled pcib3: (null) requested I/O range 0xe880-0xe8bf: in range pcib1: (null) requested I/O range 0xe880-0xe8bf: in range found-> vendor=0x8086, dev=0x1079, revid=0x03 bus=10, slot=4, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base febe0000, size 17, enabled pcib3: (null) requested memory range 0xfebe0000-0xfebfffff: good pcib1: (null) requested memory range 0xfebe0000-0xfebfffff: good map[20]: type 4, range 32, base 0000ec00, size 6, enabled pcib3: (null) requested I/O range 0xec00-0xec3f: in range pcib1: (null) requested I/O range 0xec00-0xec3f: in range em0: port 0xe880-0xe8bf mem 0xfeba0000-0xfebbffff irq 10 at device 4.0 on pci10 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfeba0000 em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0xe880 em0: [MPSAFE] em0: bpf attached em0: Ethernet address: 00:07:e9:32:d2:1e em0: Speed:N/A Duplex:N/A em1: port 0xec00-0xec3f mem 0xfebe0000-0xfebfffff irq 11 at device 4.1 on pci10 em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfebe0000 em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0xec00 em1: [MPSAFE] em1: bpf attached em1: Ethernet address: 00:07:e9:32:d2:1f em1: Speed:N/A Duplex:N/A pci9: at device 0.3 (no driver attached) pcib4: irq 10 at device 4.0 on pci0 pcib4: secondary bus 6 pcib4: subordinate bus 8 pcib4: I/O decode 0x0-0x0 pcib4: memory decode 0xfe900000-0xfe9fffff pcib4: prefetched decode 0xfbc00000-0xfbffffff pci6: on pcib4 pci6: physical bus=6 found-> vendor=0x8086, dev=0x0370, revid=0x00 bus=6, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x0372, revid=0x00 bus=6, slot=0, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) pcib5: at device 0.0 on pci6 pcib5: secondary bus 8 pcib5: subordinate bus 8 pcib5: I/O decode 0xf000-0xfff pcib5: memory decode 0xfe900000-0xfe9fffff pcib5: prefetched decode 0xfbc00000-0xfbffffff pci8: on pcib5 pci8: physical bus=8 found-> vendor=0x17d3, dev=0x1230, revid=0x00 bus=8, slot=14, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x00d6, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type 1, range 32, base fe9ff000, size 12, enabled pcib5: (null) requested memory range 0xfe9ff000-0xfe9fffff: good pcib4: (null) requested memory range 0xfe9ff000-0xfe9fffff: good map[18]: type 3, range 32, base fbc00000, size 22, enabled pcib5: (null) requested memory range 0xfbc00000-0xfbffffff: good pcib4: (null) requested memory range 0xfbc00000-0xfbffffff: good arcmsr0: mem 0xfe9ff000-0xfe9fffff,0xfbc00000-0xfbffffff irq 5 at device 14.0 on pci8 arcmsr0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9ff000 arcmsr0: [GIANT-LOCKED] pcib6: at device 0.2 on pci6 pcib6: secondary bus 7 pcib6: subordinate bus 7 pcib6: I/O decode 0x0-0x0 pcib6: memory decode 0xfff00000-0xfffff pcib6: prefetched decode 0xfff00000-0xfffff pci7: on pcib6 pci7: physical bus=7 pcib7: irq 10 at device 6.0 on pci0 pcib7: secondary bus 3 pcib7: subordinate bus 5 pcib7: I/O decode 0x0-0x0 pcib7: memory decode 0xfe800000-0xfe8fffff pcib7: prefetched decode 0xfb800000-0xfbbfffff pci3: on pcib7 pci3: physical bus=3 found-> vendor=0x8086, dev=0x0370, revid=0x00 bus=3, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x0372, revid=0x00 bus=3, slot=0, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) pcib8: at device 0.0 on pci3 pcib8: secondary bus 5 pcib8: subordinate bus 5 pcib8: I/O decode 0xf000-0xfff pcib8: memory decode 0xfe800000-0xfe8fffff pcib8: prefetched decode 0xfb800000-0xfbbfffff pci5: on pcib8 pci5: physical bus=5 found-> vendor=0x17d3, dev=0x1230, revid=0x00 bus=5, slot=14, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x00d6, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type 1, range 32, base fe8ff000, size 12, enabled pcib8: (null) requested memory range 0xfe8ff000-0xfe8fffff: good pcib7: (null) requested memory range 0xfe8ff000-0xfe8fffff: good map[18]: type 3, range 32, base fb800000, size 22, enabled pcib8: (null) requested memory range 0xfb800000-0xfbbfffff: good pcib7: (null) requested memory range 0xfb800000-0xfbbfffff: good arcmsr1: mem 0xfe8ff000-0xfe8fffff,0xfb800000-0xfbbfffff irq 5 at device 14.0 on pci5 arcmsr1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8ff000 arcmsr1: [GIANT-LOCKED] pcib9: at device 0.2 on pci3 pcib9: secondary bus 4 pcib9: subordinate bus 4 pcib9: I/O decode 0x0-0x0 pcib9: memory decode 0xfff00000-0xfffff pcib9: prefetched decode 0xfff00000-0xfffff pci4: on pcib9 pci4: physical bus=4 pcib10: irq 10 at device 7.0 on pci0 pcib10: secondary bus 2 pcib10: subordinate bus 2 pcib10: I/O decode 0x0-0x0 pcib10: memory decode 0xfff00000-0xfffff pcib10: prefetched decode 0xfff00000-0xfffff pci2: on pcib10 pci2: physical bus=2 uhci0: port 0xbc00-0xbc1f irq 10 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbc00 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xc000-0xc01f irq 7 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc000 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xc080-0xc09f irq 5 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc080 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: mem 0xfcfffc00-0xfcffffff irq 15 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfcfffc00 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib11: at device 30.0 on pci0 pcib11: secondary bus 1 pcib11: subordinate bus 1 pcib11: I/O decode 0xd000-0xdfff pcib11: memory decode 0xfd000000-0xfe7fffff pcib11: prefetched decode 0xfff00000-0xfffff pcib11: Subtractively decoded bridge. pci1: on pcib11 pci1: physical bus=1 found-> vendor=0x1002, dev=0x4752, revid=0x27 bus=1, slot=12, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fd000000, size 24, enabled pcib11: (null) requested memory range 0xfd000000-0xfdffffff: good map[14]: type 4, range 32, base 0000d800, size 8, enabled pcib11: (null) requested I/O range 0xd800-0xd8ff: in range map[18]: type 1, range 32, base fe7ff000, size 12, enabled pcib11: (null) requested memory range 0xfe7ff000-0xfe7fffff: good pci1: at device 12.0 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x7f msb=0x7f ata0: reset tp2 stat0=00 stat1=00 devices=0x4 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] atapci1: port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f irq 5 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc400 atapci1: [MPSAFE] ata2: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcc00 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc880 ata2: reset tp1 mask=01 ostat0=80 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: [MPSAFE] ata3: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc800 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc480 ata3: reset tp1 mask=01 ostat0=7f ostat1=00 ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: reset tp2 stat0=ff stat1=00 devices=0x0 ata3: [MPSAFE] pci0: at device 31.3 (no driver attached) ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed ex_isa_identify() pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xca7ff,0xca800-0xcb7ff,0xcb800-0xcc7ff on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0: ic_type 90 part_id 73 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: ic_type 90 part_id 73 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: cannot reserve I/O port range ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x21 0x31 0x21 0x21 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x21 0x29 0x21 0x21 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 233016 -> 100000 procfs registered linprocfs registered Timecounter "TSC" frequency 2793016779 Hz quality 800 Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff805f53f0, 0) error 6 Linux ELF exec handler installed lo0: bpf attached ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on ICH5 chip acd0: setting UDMA33 on ICH5 chip acd0: DVDROM drive at ata0 as master acd0: read 6890KB/s (6890KB/s), 512KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 190782MB at ata2-master SATA150 ad4: 390721968 sectors [387621C/16H/63S] 16 sectors/interrupt 1 depth queue ad4: Intel check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed Waiting 5 seconds for SCSI devices to settle GEOM: new disk ad4 pass0 at arcmsr0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-3 device pass0: Serial Number 0000002383003573 pass0: 166.666MB/s transfers (83.333MHz, offset 32, 16bit), Tagged Queueing Enabled pass1 at arcmsr1 bus 0 target 0 lun 0 pass1: Fixed Direct Access SCSI-3 device pass1: Serial Number 0000001687965638 pass1: 166.666MB/s transfers (83.333MHz, offset 32, 16bit), Tagged Queueing Enabled da0 at arcmsr0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: Serial Number 0000002383003573 da0: 166.666MB/s transfers (83.333MHz, offset 32, 16bit), Tagged Queueing Enabled da0: 2288817MB (4687497216 512 byte sectors: 255H 63S/T 291783C) da1 at arcmsr1 bus 0 target 0 lun 0 da1: Fixed Direct Access SCSI-3 device da1: Serial Number 0000001687965638 da1: 166.666MB/s transfers (83.333MHz, offset 32, 16bit), Tagged Queueing Enabled da1: 4197091MB (8595642880 512 byte sectors: 255H 63S/T 535054C) GEOM: new disk da0 GEOM: new disk da1 ATA PseudoRAID loaded Trying to mount root from ufs:/dev/ad4s1a start_init: trying /sbin/init and sysctl output of hw.acpi hw.acpi.supported_sleep_state: S1 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S1 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 hw.acpi.verbose: 1 hw.acpi.cpu.cx_supported: C1/0 hw.acpi.cpu.cx_lowest: C1 hw.acpi.cpu.cx_usage: 100.00% Acpi byte code could be found at ftp://netserv3.chg.ru/acpi-debug/may-se7520af2.asl. P.S. Linux seems to work fine with this mboard, but we would like to use FreeBSD.