From owner-freebsd-hackers Thu Jun 22 17:11:17 1995 Return-Path: hackers-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id RAA06708 for hackers-outgoing; Thu, 22 Jun 1995 17:11:17 -0700 Received: from bronze.coil.com (bronze.coil.com [198.4.94.1]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id RAA06700 for ; Thu, 22 Jun 1995 17:11:14 -0700 Received: from localhost (echet@localhost) by bronze.coil.com (8.6.4/8.6.12) id UAA09797; Thu, 22 Jun 1995 20:13:58 -0400 From: Eric Chet Message-Id: <199506230013.UAA09797@bronze.coil.com> Subject: Re: 2.05R reboot hangs To: rgrimes@gndrsh.aac.dev.com (Rodney W. Grimes) Date: Thu, 22 Jun 1995 20:13:57 -0400 (EDT) Cc: hackers@freebsd.org In-Reply-To: <199506222041.NAA07994@gndrsh.aac.dev.com> from "Rodney W. Grimes" at Jun 22, 95 01:41:35 pm X-Mailer: ELM [version 2.4 PL24] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 1339 Sender: hackers-owner@freebsd.org Precedence: bulk > > > > Hello > > > > I have a ASUS-SP3G W/i486DX2/66. I have the same problem, it hangs > > > > during reboot 30% of the time. I don't have any problems with my scsi bus. > > > > There are two quantum drives and a plextor CDROM on the scsi bus. I > > > > compiled a custom kernel a week ago. > > > > > > Could you be specific about just where in the reboot it hangs? Is it > > > at the ``mounting root'' or is it before that? > > > > > > > Sorry I should have been more specific. It goes through the shutdown, > > "rebooting, syncing, Done" 30% of the time it freezes here, it just > > locks up. I then have to hit thre reset button. This is with the cache > > set to write-through.. IF the cache is set to write-back sometimes when I > > hit the reset button, I get a CMOS checksum error after the memory test. > > This is not a ``hand during boot'', this is a failure during shutdown. > > If this is a 2.0.5 system try compiling your kernel with > > options "BROKEN_KEYBOARD_RESET" > Hello Yes this is a 2.0.5R kernel, I will giv that option a try. Thank you for all your help Rod and the rest of the CORE team. Eric - echet@coil.com > > > -- > Rod Grimes rgrimes@gndrsh.aac.dev.com > Accurate Automation Company Reliable computers for FreeBSD >