From owner-freebsd-questions  Wed Jul  2 14:53:51 1997
Return-Path: <owner-questions>
Received: (from root@localhost)
          by hub.freebsd.org (8.8.5/8.8.5) id OAA28046
          for questions-outgoing; Wed, 2 Jul 1997 14:53:51 -0700 (PDT)
Received: from cube.i-pi.com (cube.i-pi.com [198.49.217.1])
          by hub.freebsd.org (8.8.5/8.8.5) with SMTP id OAA28040
          for <questions@freebsd.org>; Wed, 2 Jul 1997 14:53:48 -0700 (PDT)
Received: (from ingham@localhost) by cube.i-pi.com (8.6.12/8.6.12) id PAA26174 for questions@freebsd.org; Wed, 2 Jul 1997 15:53:45 -0600
From: Kenneth Ingham <ingham@i-pi.com>
Message-Id: <199707022153.PAA26174@cube.i-pi.com>
Subject: 2.2.2 and 3com 3c905
To: questions@freebsd.org
Date: Wed, 2 Jul 1997 15:53:45 -0600 (MDT)
X-Mailer: ELM [version 2.4 PL23]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: owner-questions@freebsd.org
X-Loop: FreeBSD.org
Precedence: bulk

I've got a pentium gateway 2000 machine with a 3com 3c905 in it.
I installed 2.2.2 from the CD.  The vx driver sees it and properly
identifies it.  However, it's not working.

I used the DOS util to set the card to 10baseT.  The vx driver no longer
says to set it manually rather than use the auto-select.  I guess this
is good...

However, it says I'm using the mii interface.  That's cute, as this card
doesn't have a mii interface (on the outside at least).  It's got the
normal 8-pin modular connector on it.

I tried doing ifconfig vx0 link2 (which the man page says is UTP port)
and it says:

vx0: warning:
vx0: selected mii. (default)

The link light on the hub does not light.

Suggestions?

Kenneth