From owner-freebsd-hackers Mon Nov 13 10:42:48 2000 Delivered-To: freebsd-hackers@freebsd.org Received: from c014.sfo.cp.net (c014-h023.c014.sfo.cp.net [209.228.12.87]) by hub.freebsd.org (Postfix) with SMTP id B48F937B479 for ; Mon, 13 Nov 2000 10:42:31 -0800 (PST) Received: (cpmta 24750 invoked from network); 13 Nov 2000 10:42:30 -0800 Received: from m12hRs4n205.midsouth.rr.com (HELO mike) (24.95.125.205) by smtp.valuedata.net (209.228.12.87) with SMTP; 13 Nov 2000 10:42:30 -0800 X-Sent: 13 Nov 2000 18:42:30 GMT Message-ID: <009d01c01a85$52838f20$0200000a@mike> From: "Daryl Chance" To: "Soren Schmidt" Cc: "FreeBSD Hackers" References: <200011131821.TAA35683@freebsd.dk> Subject: Re: Smart And Friendly Burner? Date: Sat, 9 Sep 2000 12:42:27 -0500 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_009A_01C01A5B.6905AE60" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-hackers@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_009A_01C01A5B.6905AE60 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit I burned the copy from the 4.2RC1 iso found on the ftp site. doing a list on / shows the kernel was compiled on Nov 7th. When I recompiled the kernel (not adding, just commenting stuff out) It showed the message that looked fine. (/kernel: acd1: CD-RW at ata1-slave using WDMA2) The first message I got with the default kernel. I went ahead and attached my config file. HTH, ----------------------------------------------------------------------- | Daryl Chance | We start seeing these new accounts being created, | | -------------- | but that could be an anomaly of the system. After | | Valuedata, LLC | a day or two, we realized it was someone hacking | | Memphis, TN | into the system. - Microsoft on thier hacker | ----------------------------------------------------------------------- ----- Original Message ----- From: "Soren Schmidt" To: "Daryl Chance" Cc: "FreeBSD Hackers" Sent: Monday, November 13, 2000 1:21 PM Subject: Re: Smart And Friendly Burner? > It seems Daryl Chance wrote: > > Hi, > > > > Anyone else have a smart and friendly cd burner? When I boot I get this: > > > > /kernel: acd0: CDROM at ata1-master using > > UDMA33 > > /kernel: ata1-slave: timeout waiting for command=ef s=00 e=00 > > /kernel: ata1-slave: timeout waiting for command=ef s=00 e=00 > > /kernel: ata1-slave: CDROM device -NO DRIVER! > > > > I'm running 4.2 RC1 (the iso out on the ftp site). I've since recompiled > > the kernel (commenting out a lot of things) and I get this now: > > > > /kernel: acd1: CD-RW at ata1-slave using WDMA2 > > > > So it looks fine now. I haven't added to the kernel, just removed stuff. > > If needed, I could send the conf file. > > You dont mention what version on FreeBSD we are talking about here, in > any case you should upgrade to the latest version on the branch you > are on... > > What exactly have you removed ? > > -Søren > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hackers" in the body of the message > ------=_NextPart_000_009A_01C01A5B.6905AE60 Content-Type: application/octet-stream; name="chancedj" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="chancedj" #=0A= # GENERIC -- Generic kernel configuration file for FreeBSD/i386=0A= #=0A= # For more information on this file, please read the handbook section on=0A= # Kernel Configuration Files:=0A= #=0A= # http://www.FreeBSD.org/handbook/kernelconfig-config.html=0A= #=0A= # The handbook is also available locally in /usr/share/doc/handbook=0A= # if you've installed the doc distribution, otherwise always see the=0A= # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the=0A= # latest information.=0A= #=0A= # An exhaustive list of options and more detailed explanations of the=0A= # device lines is also present in the ./LINT configuration file. If you = are=0A= # in doubt as to the purpose or necessity of a line, check first in LINT.=0A= #=0A= # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.20 2000/10/31 23:16:07 = n_hibma Exp $=0A= =0A= machine i386=0A= #cpu I386_CPU=0A= #cpu I486_CPU=0A= #cpu I586_CPU=0A= cpu I686_CPU=0A= ident GENERIC=0A= maxusers 32=0A= =0A= #makeoptions DEBUG=3D-g #Build kernel with gdb(1) debug symbols=0A= =0A= options MATH_EMULATE #Support for x87 emulation=0A= options INET #InterNETworking=0A= #options INET6 #IPv6 communications protocols=0A= options FFS #Berkeley Fast Filesystem=0A= options FFS_ROOT #FFS usable as root device [keep this!]=0A= options SOFTUPDATES #Enable FFS soft updates support=0A= #options MFS #Memory Filesystem=0A= #options MD_ROOT #MD is a potential root device=0A= #options NFS #Network Filesystem=0A= #options NFS_ROOT #NFS usable as root device, NFS required=0A= #options MSDOSFS #MSDOS Filesystem=0A= options CD9660 #ISO 9660 Filesystem=0A= options CD9660_ROOT #CD-ROM usable as root, CD9660 required=0A= options PROCFS #Process filesystem=0A= options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]=0A= #options SCSI_DELAY=3D15000 #Delay (in ms) before probing SCSI=0A= #options UCONSOLE #Allow users to grab the console=0A= #options USERCONFIG #boot -c editor=0A= #options VISUAL_USERCONFIG #visual boot -c editor=0A= #options KTRACE #ktrace(1) support=0A= options SYSVSHM #SYSV-style shared memory=0A= options SYSVMSG #SYSV-style message queues=0A= options SYSVSEM #SYSV-style semaphores=0A= options P1003_1B #Posix P1003_1B real-time extensions=0A= options _KPOSIX_PRIORITY_SCHEDULING=0A= options ICMP_BANDLIM #Rate limit bad replies=0A= options KBD_INSTALL_CDEV # install a CDEV entry in /dev=0A= =0A= # To make an SMP kernel, the next two are needed=0A= #options SMP # Symmetric MultiProcessor Kernel=0A= #options APIC_IO # Symmetric (APIC) I/O=0A= =0A= device isa=0A= device eisa=0A= device pci=0A= =0A= # Floppy drives=0A= device fdc0 at isa? port IO_FD1 irq 6 drq 2=0A= device fd0 at fdc0 drive 0=0A= device fd1 at fdc0 drive 1=0A= =0A= # ATA and ATAPI devices=0A= #device ata0 at isa? port IO_WD1 irq 14=0A= #device ata1 at isa? port IO_WD2 irq 15=0A= device ata=0A= device atadisk # ATA disk drives=0A= device atapicd # ATAPI CDROM drives=0A= #device atapifd # ATAPI floppy drives=0A= #device atapist # ATAPI tape drives=0A= options ATA_STATIC_ID #Static device numbering=0A= options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices=0A= =0A= # SCSI Controllers=0A= #device ahb # EISA AHA1742 family=0A= #device ahc # AHA2940 and onboard AIC7xxx devices=0A= #device amd # AMD 53C974 (Teckram DC-390(T))=0A= #device isp # Qlogic family=0A= #device ncr # NCR/Symbios Logic=0A= #device sym # NCR/Symbios Logic (newer chipsets)=0A= #options SYM_SETUP_LP_PROBE_MAP=3D0x40=0A= # Allow ncr to attach legacy NCR devices when=0A= # both sym and ncr are configured=0A= =0A= #device adv0 at isa?=0A= #device adw=0A= #device bt0 at isa?=0A= #device aha0 at isa?=0A= #device aic0 at isa?=0A= =0A= #device ncv # NCR 53C500=0A= #device nsp # Workbit Ninja SCSI-3=0A= #device stg # TMC 18C30/18C50=0A= =0A= # SCSI peripherals=0A= #device scbus # SCSI bus (required)=0A= #device da # Direct Access (disks)=0A= #device sa # Sequential Access (tape etc)=0A= #device cd # CD=0A= #device pass # Passthrough device (direct SCSI access)=0A= =0A= # RAID controllers interfaced to the SCSI subsystem=0A= #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID=0A= #device dpt # DPT Smartcache - See LINT for options!=0A= #device mly # Mylex AcceleRAID/eXtremeRAID=0A= =0A= # RAID controllers=0A= #device ida # Compaq Smart RAID=0A= #device amr # AMI MegaRAID=0A= #device mlx # Mylex DAC960 family=0A= #device twe # 3ware Escalade=0A= =0A= # atkbdc0 controls both the keyboard and the PS/2 mouse=0A= device atkbdc0 at isa? port IO_KBD=0A= device atkbd0 at atkbdc? irq 1 flags 0x1=0A= device psm0 at atkbdc? irq 12=0A= =0A= device vga0 at isa?=0A= =0A= # splash screen/screen saver=0A= pseudo-device splash=0A= =0A= # syscons is the default console driver, resembling an SCO console=0A= device sc0 at isa? flags 0x100=0A= =0A= # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver=0A= #device vt0 at isa?=0A= #options XSERVER # support for X server on a vt console=0A= #options FAT_CURSOR # start with block cursor=0A= # If you have a ThinkPAD, uncomment this along with the rest of the PCVT = lines=0A= #options PCVT_SCANSET=3D2 # IBM keyboards are non-std=0A= =0A= # Floating point support - do not disable.=0A= device npx0 at nexus? port IO_NPX irq 13=0A= =0A= # Power management support (see LINT for more options)=0A= device apm0 at nexus? disable flags 0x20 # Advanced Power Management=0A= =0A= # PCCARD (PCMCIA) support=0A= #device card=0A= #device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000=0A= #device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable=0A= =0A= # Serial (COM) ports=0A= #device sio0 at isa? port IO_COM1 flags 0x10 irq 4=0A= #device sio1 at isa? port IO_COM2 irq 3=0A= #device sio2 at isa? disable port IO_COM3 irq 5=0A= #device sio3 at isa? disable port IO_COM4 irq 9=0A= =0A= # Parallel port=0A= #device ppc0 at isa? irq 7=0A= #device ppbus # Parallel port bus (required)=0A= #device lpt # Printer=0A= #device plip # TCP/IP over parallel=0A= #device ppi # Parallel port interface device=0A= #device vpo # Requires scbus and da=0A= =0A= =0A= # PCI Ethernet NICs.=0A= #device de # DEC/Intel DC21x4x (``Tulip'')=0A= #device fxp # Intel EtherExpress PRO/100B (82557, 82558)=0A= #device tx # SMC 9432TX (83c170 ``EPIC'')=0A= #device vx # 3Com 3c590, 3c595 (``Vortex'')=0A= #device wx # Intel Gigabit Ethernet Card (``Wiseman'')=0A= =0A= # PCI Ethernet NICs that use the common MII bus controller code.=0A= # NOTE: Be sure to keep the 'device miibus' line in order to use these = NICs!=0A= device miibus # MII bus support=0A= device dc # DEC/Intel 21143 and various workalikes=0A= #device pcn # AMD Am79C79x PCI 10/100 NICs=0A= #device rl # RealTek 8129/8139=0A= #device sf # Adaptec AIC-6915 (``Starfire'')=0A= #device sis # Silicon Integrated Systems SiS 900/SiS 7016=0A= #device ste # Sundance ST201 (D-Link DFE-550TX)=0A= #device tl # Texas Instruments ThunderLAN=0A= #device vr # VIA Rhine, Rhine II=0A= #device wb # Winbond W89C840F=0A= #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')=0A= =0A= # ISA Ethernet NICs.=0A= #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000=0A= #device ex=0A= #device ep=0A= #device fe0 at isa? port 0x300=0A= # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really=0A= # exists only as a PCMCIA device, so there is no ISA attatement needed=0A= # and resources will always be dynamically assigned by the pccard code.=0A= #device wi=0A= # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below = will=0A= # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP=0A= # mode (the factory default). If you set the switches on your ISA=0A= # card for a manually chosen I/O address and IRQ, you must specify=0A= # those paremeters here.=0A= #device an=0A= # Xircom Ethernet=0A= #device xe=0A= # The probe order of these is presently determined by = i386/isa/isa_compat.c.=0A= #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000=0A= #device le0 at isa? port 0x300 irq 5 iomem 0xd0000=0A= #device lnc0 at isa? port 0x280 irq 10 drq 0=0A= #device cs0 at isa? port 0x300=0A= #device sn0 at isa? port 0x300 irq 10=0A= =0A= # Pseudo devices - the number indicates how many units to allocated.=0A= pseudo-device loop # Network loopback=0A= pseudo-device ether # Ethernet support=0A= #pseudo-device sl 1 # Kernel SLIP=0A= #pseudo-device ppp 1 # Kernel PPP=0A= #pseudo-device tun # Packet tunnel.=0A= pseudo-device pty # Pseudo-ttys (telnet etc)=0A= #pseudo-device md # Memory "disks"=0A= #pseudo-device gif 4 # IPv6 and IPv4 tunneling=0A= #pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)=0A= =0A= # The `bpf' pseudo-device enables the Berkeley Packet Filter.=0A= # Be aware of the administrative consequences of enabling this!=0A= pseudo-device bpf #Berkeley packet filter=0A= =0A= # USB support=0A= device uhci # UHCI PCI->USB interface=0A= device ohci # OHCI PCI->USB interface=0A= device usb # USB Bus (required)=0A= device ugen # Generic=0A= device uhid # "Human Interface Devices"=0A= #device ukbd # Keyboard=0A= #device ulpt # Printer=0A= #device umass # Disks/Mass storage - Requires scbus and da=0A= device ums # Mouse=0A= #device uscanner # Scanners=0A= # USB Ethernet, requires mii=0A= #device aue # ADMtek USB ethernet=0A= #device cue # CATC USB ethernet=0A= #device kue # Kawasaki LSI USB ethernet=0A= ------=_NextPart_000_009A_01C01A5B.6905AE60-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message