From owner-freebsd-mobile@FreeBSD.ORG  Thu Sep 18 10:11:25 2003
Return-Path: <owner-freebsd-mobile@FreeBSD.ORG>
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id CBAD216A4B3
	for <freebsd-mobile@freebsd.org>;
	Thu, 18 Sep 2003 10:11:25 -0700 (PDT)
Received: from ack.Berkeley.EDU (ack.Berkeley.EDU [128.32.206.66])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 5B9E743FBD
	for <freebsd-mobile@freebsd.org>;
	Thu, 18 Sep 2003 10:11:23 -0700 (PDT)
	(envelope-from mhunter@ack.Berkeley.EDU)
Received: (from mhunter@localhost)
	by ack.Berkeley.EDU (8.11.3/8.11.3) id h8IHBMf08893
	for freebsd-mobile@freebsd.org; Thu, 18 Sep 2003 10:11:22 -0700 (PDT)
Date: Thu, 18 Sep 2003 10:11:22 -0700
From: Mike Hunter <mhunter@ack.Berkeley.EDU>
To: freebsd-mobile@freebsd.org
Message-ID: <20030918171122.GA6658@ack.Berkeley.EDU>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.4.1i
Subject: Dell Latitude D800 Onboard Ethernet woes
X-BeenThere: freebsd-mobile@freebsd.org
X-Mailman-Version: 2.1.1
Precedence: list
List-Id: Mobile computing with FreeBSD <freebsd-mobile.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-mobile>,
	<mailto:freebsd-mobile-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-mobile>
List-Post: <mailto:freebsd-mobile@freebsd.org>
List-Help: <mailto:freebsd-mobile-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-mobile>,
	<mailto:freebsd-mobile-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Thu, 18 Sep 2003 17:11:26 -0000

Greetings freebsd-mobile,

I have a dell latitude D800 that I have FreeBSD 5.1-RELEASE installed on
(cvsup'd and compiled Sep 12 12:30 PDT).  I found it necessary to rebuild
because I had forgotten to enable "device pcm" for sound in my kernel
config.

Unfortunately, my onboard ethernet device (bge0) went away after the
upgrade.  I tried disabling sound and recompiling, but it still didn't
work.  Interestingly, when I installed from the 5.1-release ISO, the NIC
didn't work either...cvsuping some time before September 11 (sorry I don't
have more precise dates) got me sources that got the interface working.
Windows xp identifies it as a "broadcom 570x Gigabit Integrated
Controller" on pci bus 2, device 0, function 0, irq 11.

I did a cp -R from /boot to /boot.good before I enabled the sound device,
so I have a kernel on the system that will work with the nic, if that's
any help for debugging.  Booting the old kernel with -v, I can see it
attaching the driver to the device....

Please let me know if any other information would be helpful.  Feel free
to ignore the ACPI problems, that's another email :)

Thanks,

Mike Hunter

Here are my dmesg's (boot -v) from both the new (no bge0) and old (working
bge0) kernels and my kernel config.

New boot -v
-------
[beginning seems to be truncated....sorry, let me know and I'll set up a
serial console]

90 (c00ffe90)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xc97e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4  Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL   CPi R  > on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000eac4
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=33408086)
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fc590
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0   29    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    B   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    D   0x6b  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0   31    A   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   31    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    1    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    2    0    A   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    2    1    A   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    2    1    B   0x63  none
embedded    2    3    A   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    2    3    B   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    8    0    A   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    8    0    B   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    8    1    A   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    8    1    B   0x63  3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.LNKA irq  11: [  9 10 11] low,level,sharable 0.31.0
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 0.31.1
\\_SB_.PCI0.LNKC irq  11: [  9 10 11] low,level,sharable 0.31.2
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 0.31.3
\\_SB_.PCI0.LNKA irq  11: [  9 10 11] low,level,sharable 0.29.0
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 0.29.1
\\_SB_.PCI0.LNKC irq  11: [  9 10 11] low,level,sharable 0.29.2
\\_SB_.PCI0.LNKH irq  11: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.29.3
\\_SB_.PCI0.LNKA irq  11: [  9 10 11] low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 0.1.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LNKA irq  11: [  9 10 11] low,level,sharable 0.31.0
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 0.31.1
\\_SB_.PCI0.LNKC irq  11: [  9 10 11] low,level,sharable 0.31.2
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 0.31.3
\\_SB_.PCI0.LNKA irq  11: [  9 10 11] low,level,sharable 0.29.0
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 0.29.1
\\_SB_.PCI0.LNKC irq  11: [  9 10 11] low,level,sharable 0.29.2
\\_SB_.PCI0.LNKH irq  11: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.29.3
\\_SB_.PCI0.LNKA irq  11: [  9 10 11] low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 0.1.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base ec000000, size 26, enabled
found->	vendor=0x8086, dev=0x3340, revid=0x03
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3341, revid=0x03
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 0000bf80, size  5, enabled
found->	vendor=0x8086, dev=0x24c2, revid=0x01
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type 4, range 32, base 0000bf40, size  5, enabled
found->	vendor=0x8086, dev=0x24c4, revid=0x01
	bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type 4, range 32, base 0000bf20, size  5, enabled
found->	vendor=0x8086, dev=0x24c7, revid=0x01
	bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	map[10]: type 1, range 32, base f4fffc00, size 10, enabled
found->	vendor=0x8086, dev=0x24cd, revid=0x01
	bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x8086, dev=0x2448, revid=0x81
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24cc, revid=0x01
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 000001f0, size  3, enabled
	map[14]: type 4, range 32, base 000003f4, size  2, enabled
	map[18]: type 4, range 32, base 00000170, size  3, enabled
	map[1c]: type 4, range 32, base 00000374, size  2, enabled
	map[20]: type 4, range 32, base 0000bfa0, size  4, enabled
found->	vendor=0x8086, dev=0x24ca, revid=0x01
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[10]: type 4, range 32, base 0000b800, size  8, enabled
	map[14]: type 4, range 32, base 0000bc40, size  6, enabled
	map[18]: type 1, range 32, base f4fff800, size  9, enabled
	map[1c]: type 1, range 32, base f4fff400, size  8, enabled
found->	vendor=0x8086, dev=0x24c5, revid=0x01
	bus=0, slot=31, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000b400, size  8, enabled
	map[14]: type 4, range 32, base 0000b080, size  7, enabled
found->	vendor=0x8086, dev=0x24c6, revid=0x01
	bus=0, slot=31, func=6
	class=07-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
agp0: <Intel Generic host to PCI bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xc000-0xcfff
pcib1:   memory decode     0xfc000000-0xfdffffff
pcib1:   prefetched decode 0xf0000000-0xf3ffffff
---- initial configuration ------------------------
\\_SB_.PCI0.LNKA irq  11: [  9 10 11] low,level,sharable 1.0.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LNKA irq  11: [  9 10 11] low,level,sharable 1.0.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 1, range 32, base fc000000, size 24, enabled
	map[14]: type 3, range 32, base f0000000, size 26, enabled
found->	vendor=0x10de, dev=0x0286, revid=0xa1
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0027, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: vendor 0x413c product 0x8000, rev 1.10/5.65, addr 2
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xd000-0xefff
pcib2:   memory decode     0xf6000000-0xfbffffff
pcib2:   prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 2.1.0
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 2.1.1
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 2.3.0
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 2.3.1
\\_SB_.PCI0.LNKC irq  11: [  9 10 11] low,level,sharable 2.0.0
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 2.8.0
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 2.8.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 2.1.0
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 2.1.1
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 2.3.0
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 2.3.1
\\_SB_.PCI0.LNKC irq  11: [  9 10 11] low,level,sharable 2.0.0
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 2.8.0
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 2.8.1
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
	map[10]: type 1, range 64, base faff0000, size 16, enabled
found->	vendor=0x14e4, dev=0x165d, revid=0x01
	bus=2, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0116, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x104c, dev=0xac47, revid=0x01
	bus=2, slot=1, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x104c, dev=0xac4a, revid=0x01
	bus=2, slot=1, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base fafef800, size 11, enabled
	map[14]: type 1, range 32, base fafe8000, size 14, enabled
found->	vendor=0x104c, dev=0x802b, revid=0x00
	bus=2, slot=1, func=2
	class=0c-00-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000ecf8, size  3, enabled
found->	vendor=0x104c, dev=0x8204, revid=0x00
	bus=2, slot=1, func=3
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0101, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base fafec000, size 13, enabled
found->	vendor=0x14e4, dev=0x4324, revid=0x02
	bus=2, slot=3, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
pci2: <network, ethernet> at device 0.0 (no driver attached)
cbb0: <PCI-CardBus Bridge> at device 1.0 on pci2
pcib2: device cbb0 requested decoded memory range 0xf6000000-0xfbffffff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: matched entry for 2.1.INTA (source \\_SB_.PCI0.LNKD)
pcib2: slot 1 INTA is routed to irq 11
cbb1: <PCI-CardBus Bridge> irq 11 at device 1.1 on pci2
pcib2: device cbb1 requested decoded memory range 0xf6000000-0xfbffffff
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
fwohci0: vendor=104c, dev=802b
fwohci0: <1394 Open Host Controller Interface> mem 0xfafe8000-0xfafebfff,0xfafef800-0xfafeffff irq 11 at device 1.2 on pci2
fwohci0: latency timer 32 -> 32.
fwohci0: cache size 8 -> 8.
pcib2: device fwohci0 requested decoded memory range 0xfafef800-0xfafeffff
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 31:4f:c0:00:21:e5:28:61
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 32:4f:c0:e5:28:61
fwe0: bpf attached
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach (cold=1)
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: loop=0, retry=0
fwohci0: fwphy_rddata: loop=0, retry=0
pci2: <base peripheral> at device 1.3 (no driver attached)
pci2: <network> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: pre reset mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: after reset mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 14 eb
ata1: after reset mask=03 stat0=00 stat1=00
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
pcm0: <Intel 82801DB (ICH4)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem 0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 11 at device 31.5 on pci0
pcm0: <SigmaTel STAC9750/51 AC97 Codec (id = 0x83847650)>
pcm0: Codec features headphone, 20 bit DAC, 20 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, reserved 4
pcm0: sndbuf_setmap a13000, 4000; 0xdb9eb000 -> a13000
pcm0: sndbuf_setmap a38000, 4000; 0xdb9ef000 -> a38000
pci0: <simple comms> at device 31.6 (no driver attached)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcf7ff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
fwohci0: BUS reset
sbp_post_busreset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
    ACPI-0293: *** Warning: Buffer created with zero length in AML
    ACPI-0293: *** Warning: Buffer created with zero length in AML
    ACPI-0293: *** Warning: Buffer created with zero length in AML
    ACPI-0293: *** Warning: Buffer created with zero length in AML
acpi_cmbat1: battery initialization start
pcib2: device pccard0 requested decoded memory range 0xf6000000-0xfbffffff
pccard0: CIS version PCCARD 2.0 or 2.1
pccard0: CIS info: Cisco Systems, 340 Series Wireless LAN Adapter
pccard0: Manufacturer code 0x15f, product 0x7
pccard0: function 0: network adapter, ccr addr 3e0 mask 7
pccard0: function 0, config table entry 5: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqlevel
pcib2: device pccard0 requested decoded I/O range 0x100-0xffffffff
pcib2: device pccard0 requested decoded memory range 0xf6000000-0xfbffffff
an0: <Cisco Systems 340 Series Wireless LAN Adapter> at port 0x100-0x13f irq 11 function 0 config 5 on pccard0
pcib2: device an0 requested decoded I/O range 0x100-0x13f
pcib2: device pccard0 requested decoded I/O range 0x100-0x13f
pcib2: device an0 requested decoded I/O range 0x100-0x13f
an0: got RSSI <-> dBM map
an0: Ethernet address: 00:40:96:34:dd:95
an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
an0: bpf attached
bus_explore done
sbp_post_explore (sbp_cold=2)
    ACPI-0293: *** Warning: Buffer created with zero length in AML
        -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
    ACPI-0293: *** Warning: Buffer created with zero length in AML
        -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
    ACPI-0293: *** Warning: Buffer created with zero length in AML
        -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
    ACPI-0293: *** Warning: Buffer created with zero length in AML
        -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ata1-slave: timeout waiting for interrupt
ata1-slave: ATAPI identify failed
ad0: success setting UDMA100 on Intel ICH4 chip
ad0: <IC25N040ATCS05-0/CS4OA63A> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=12 dmamode=34 udmamode=69 cblid=1
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-master: piomode=12 dmamode=34 udmamode=66 dmaflag=1
ata1-master: success setting PIO4 on Intel ICH4 chip
acd0: <MATSHITA CD-RW/DVD-ROM UJDA740/1.03> CD-RW drive at ata1 as master
acd0: read 4134KB/s (34515KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet
acd0: Writes: CD-R, CD-RW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: measured ac97 link rate at 48009 Hz, will use 48000 Hz
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
[0] f:80 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:16771797
[1] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/254/63 s:16771860 l:48227130
[2] f:00 typ:130 s(CHS):1023/0/1 e(CHS):1023/254/63 s:64998990 l:1044225
[3] f:00 typ:131 s(CHS):1023/0/1 e(CHS):1023/254/63 s:66043215 l:12096945
GEOM: Configure ad0s1, start 32256 length 8587160064 end 8587192319
GEOM: Configure ad0s2, start 8587192320 length 24692290560 end 33279482879
GEOM: Configure ad0s3, start 33279482880 length 534643200 end 33814126079
GEOM: Configure ad0s4, start 33814126080 length 6193635840 end 40007761919
GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s2b, start 268435456 length 1050894336 end 1319329791
GEOM: Configure ad0s2c, start 0 length 24692290560 end 24692290559
GEOM: Configure ad0s2d, start 1319329792 length 268435456 end 1587765247
GEOM: Configure ad0s2e, start 1587765248 length 268435456 end 1856200703
GEOM: Configure ad0s2f, start 1856200704 length 22836089856 end 24692290559
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
    ACPI-0293: *** Warning: Buffer created with zero length in AML
        -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
    ACPI-0293: *** Warning: Buffer created with zero length in AML
        -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
    ACPI-0293: *** Warning: Buffer created with zero length in AML
        -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
    ACPI-0293: *** Warning: Buffer created with zero length in AML
        -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
Linux ELF exec handler installed

---------

Here's boot -v from the good (aka old) kernel

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #1: Fri Sep  5 10:32:13 PDT 2003
    root@:/usr/obj/usr/src/sys/dorine
Preloaded elf kernel "/boot.good/kernel/kernel" at 0xc0748000.
Preloaded elf module "/boot.good/kernel/acpi.ko" at 0xc07481e0.
Calibrating clock(s) ... i8254 clock: 1193173 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1598648320 Hz
CPU: Intel(R) Pentium(R) M processor 1600MHz (1598.65-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
  Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory  = 536535040 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x000000000076f000 - 0x000000001f688fff, 519151616 bytes (126746 pages)
avail memory = 513253376 (489 MB)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xc97e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4  Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL   CPi R  > on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000eac4
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=33408086)
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fc590
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0   29    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    B   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    D   0x6b  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0   31    A   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   31    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    1    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    2    0    A   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    2    1    A   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    2    1    B   0x63  none
embedded    2    3    A   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    2    3    B   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    8    0    A   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    8    0    B   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    8    1    A   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    8    1    B   0x63  3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.LNKA irq  11: [  9 10 11] low,level,sharable 0.31.0
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 0.31.1
\\_SB_.PCI0.LNKC irq  11: [  9 10 11] low,level,sharable 0.31.2
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 0.31.3
\\_SB_.PCI0.LNKA irq  11: [  9 10 11] low,level,sharable 0.29.0
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 0.29.1
\\_SB_.PCI0.LNKC irq  11: [  9 10 11] low,level,sharable 0.29.2
\\_SB_.PCI0.LNKH irq  11: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.29.3
\\_SB_.PCI0.LNKA irq  11: [  9 10 11] low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 0.1.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LNKA irq  11: [  9 10 11] low,level,sharable 0.31.0
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 0.31.1
\\_SB_.PCI0.LNKC irq  11: [  9 10 11] low,level,sharable 0.31.2
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 0.31.3
\\_SB_.PCI0.LNKA irq  11: [  9 10 11] low,level,sharable 0.29.0
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 0.29.1
\\_SB_.PCI0.LNKC irq  11: [  9 10 11] low,level,sharable 0.29.2
\\_SB_.PCI0.LNKH irq  11: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.29.3
\\_SB_.PCI0.LNKA irq  11: [  9 10 11] low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 0.1.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base ec000000, size 26, enabled
found->	vendor=0x8086, dev=0x3340, revid=0x03
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3341, revid=0x03
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 0000bf80, size  5, enabled
pcib0: matched entry for 0.29.INTA (source \\_SB_.PCI0.LNKA)
pcib0: slot 29 INTA is routed to irq 11
found->	vendor=0x8086, dev=0x24c2, revid=0x01
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type 4, range 32, base 0000bf40, size  5, enabled
pcib0: matched entry for 0.29.INTB (source \\_SB_.PCI0.LNKD)
pcib0: slot 29 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c4, revid=0x01
	bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type 4, range 32, base 0000bf20, size  5, enabled
pcib0: matched entry for 0.29.INTC (source \\_SB_.PCI0.LNKC)
pcib0: slot 29 INTC is routed to irq 11
found->	vendor=0x8086, dev=0x24c7, revid=0x01
	bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	map[10]: type 1, range 32, base f4fffc00, size 10, enabled
pcib0: matched entry for 0.29.INTD (source \\_SB_.PCI0.LNKH)
pcib0: slot 29 INTD is routed to irq 11
found->	vendor=0x8086, dev=0x24cd, revid=0x01
	bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x8086, dev=0x2448, revid=0x81
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24cc, revid=0x01
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 000001f0, size  3, enabled
	map[14]: type 4, range 32, base 000003f4, size  2, enabled
	map[18]: type 4, range 32, base 00000170, size  3, enabled
	map[1c]: type 4, range 32, base 00000374, size  2, enabled
	map[20]: type 4, range 32, base 0000bfa0, size  4, enabled
found->	vendor=0x8086, dev=0x24ca, revid=0x01
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[10]: type 4, range 32, base 0000b800, size  8, enabled
	map[14]: type 4, range 32, base 0000bc40, size  6, enabled
	map[18]: type 1, range 32, base f4fff800, size  9, enabled
	map[1c]: type 1, range 32, base f4fff400, size  8, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.PCI0.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c5, revid=0x01
	bus=0, slot=31, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000b400, size  8, enabled
	map[14]: type 4, range 32, base 0000b080, size  7, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.PCI0.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c6, revid=0x01
	bus=0, slot=31, func=6
	class=07-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
agp0: <Intel 82855 host to AGP bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xc000-0xcfff
pcib1:   memory decode     0xfc000000-0xfdffffff
pcib1:   prefetched decode 0xf0000000-0xf3ffffff
---- initial configuration ------------------------
\\_SB_.PCI0.LNKA irq  11: [  9 10 11] low,level,sharable 1.0.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LNKA irq  11: [  9 10 11] low,level,sharable 1.0.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 1, range 32, base fc000000, size 24, enabled
	map[14]: type 3, range 32, base f0000000, size 26, enabled
pcib1: matched entry for 1.0.INTA (source \\_SB_.PCI0.LNKA)
pcib1: slot 0 INTA is routed to irq 11
found->	vendor=0x10de, dev=0x0286, revid=0xa1
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0027, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: vendor 0x413c product 0x8000, rev 1.10/5.65, addr 2
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xd000-0xefff
pcib2:   memory decode     0xf6000000-0xfbffffff
pcib2:   prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 2.1.0
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 2.1.1
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 2.3.0
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 2.3.1
\\_SB_.PCI0.LNKC irq  11: [  9 10 11] low,level,sharable 2.0.0
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 2.8.0
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 2.8.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 2.1.0
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 2.1.1
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 2.3.0
\\_SB_.PCI0.LNKD irq  11: [  5  7  9 10 11] low,level,sharable 2.3.1
\\_SB_.PCI0.LNKC irq  11: [  9 10 11] low,level,sharable 2.0.0
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 2.8.0
\\_SB_.PCI0.LNKB irq  11: [  5  7] low,level,sharable 2.8.1
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
	map[10]: type 1, range 64, base faff0000, size 16, enabled
pcib2: matched entry for 2.0.INTA (source \\_SB_.PCI0.LNKC)
pcib2: slot 0 INTA is routed to irq 11
found->	vendor=0x14e4, dev=0x165d, revid=0x01
	bus=2, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0116, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x104c, dev=0xac47, revid=0x01
	bus=2, slot=1, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
pcib2: matched entry for 2.1.INTA (source \\_SB_.PCI0.LNKD)
pcib2: slot 1 INTA is routed to irq 11
found->	vendor=0x104c, dev=0xac4a, revid=0x01
	bus=2, slot=1, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base fafef800, size 11, enabled
	map[14]: type 1, range 32, base fafe8000, size 14, enabled
pcib2: matched entry for 2.1.INTA (source \\_SB_.PCI0.LNKD)
pcib2: slot 1 INTA is routed to irq 11
found->	vendor=0x104c, dev=0x802b, revid=0x00
	bus=2, slot=1, func=2
	class=0c-00-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000ecf8, size  3, enabled
found->	vendor=0x104c, dev=0x8204, revid=0x00
	bus=2, slot=1, func=3
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0101, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base fafec000, size 13, enabled
pcib2: matched entry for 2.3.INTA (source \\_SB_.PCI0.LNKB)
pcib2: slot 3 INTA is routed to irq 11
found->	vendor=0x14e4, dev=0x4324, revid=0x02
	bus=2, slot=3, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
bge0: <Broadcom BCM5705M Gigabit Ethernet, ASIC rev. 0x3001> mem 0xfaff0000-0xfaffffff irq 11 at device 0.0 on pci2
pcib2: device bge0 requested decoded memory range 0xfaff0000-0xfaffffff
bge0: Ethernet address: 00:0b:db:99:d6:06
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: bpf attached
cbb0: <PCI-CardBus Bridge> at device 1.0 on pci2
pcib2: device cbb0 requested decoded memory range 0xf6000000-0xfbffffff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: matched entry for 2.1.INTA (source \\_SB_.PCI0.LNKD)
pcib2: slot 1 INTA is routed to irq 11
cbb0: PCI Configuration space:
  0x00: 0xac47104c 0x02100007 0x06070001 0x00822008 
  0x10: 0xf6000000 0x020000a0 0x20000000 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 
  0x40: 0x014e1028 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x38407061 0x00000019 0x001f0000 0x012c1202 
  0x90: 0x606483c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe320001 0x00c00000 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
cbb1: <PCI-CardBus Bridge> irq 11 at device 1.1 on pci2
pcib2: device cbb1 requested decoded memory range 0xf6000000-0xfbffffff
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: PCI Configuration space:
  0x00: 0xac4a104c 0x02100107 0x06070001 0x00822008 
  0x10: 0xf6001000 0x020000a0 0x20000000 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 
  0x40: 0x014e1028 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x38445161 0x00000019 0x001f0000 0x012c1202 
  0x90: 0x606482c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe320001 0x00c00000 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
fwohci0: vendor=104c, dev=802b
fwohci0: <1394 Open Host Controller Interface> mem 0xfafe8000-0xfafebfff,0xfafef800-0xfafeffff irq 11 at device 1.2 on pci2
fwohci0: latency timer 32 -> 32.
fwohci0: cache size 8 -> 8.
pcib2: device fwohci0 requested decoded memory range 0xfafef800-0xfafeffff
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 31:4f:c0:00:21:e5:28:61
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x3 loop=0, retry=0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 32:4f:c0:e5:28:61
fwe0: bpf attached
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach (cold=1)
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: BUS reset
sbp_post_busreset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
pci2: <base peripheral> at device 1.3 (no driver attached)
pci2: <network> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-slave: stat=0x80 err=0x8e lsb=0x00 msb=0x00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: reset tp3 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reset tp3 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms> at device 31.6 (no driver attached)
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xcf800-0xcffff,0xc0000-0xcf7ff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x801 0x811 0x801 0x801
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x801 0x801 0x801 0x801
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1598648320 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata1: spurious interrupt - status=0x00 error=0x01 reason=0x01
Current DB 0
ch = 0
 Current OP   KEY INT BR   len     Addr   Depend Stat: Cnt
00978000 OUTL ST2 ALL ALL    12 00000000 00978080 8411:000c RUN,ACTIVE, ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_cmbat1: battery initialization start
pcib2: device pccard0 requested decoded memory range 0xf6000000-0xfbffffff
pccard0: CIS version PCCARD 2.0 or 2.1
pccard0: CIS info: Cisco Systems, 340 Series Wireless LAN Adapter
pccard0: Manufacturer code 0x15f, product 0x7
pccard0: function 0: network adapter, ccr addr 3e0 mask 7
pccard0: function 0, config table entry 5: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqlevel
pcib2: device pccard0 requested decoded I/O range 0x100-0xffffffff
pcib2: device pccard0 requested decoded memory range 0xf6000000-0xfbffffff
an0: <Cisco Systems 340 Series Wireless LAN Adapter> at port 0x100-0x13f irq 11 function 0 config 5 on pccard0
pcib2: device an0 requested decoded I/O range 0x100-0x13f
pcib2: device pccard0 requested decoded I/O range 0x100-0x13f
pcib2: device an0 requested decoded I/O range 0x100-0x13f
an0: got RSSI <-> dBM map
an0: Ethernet address: 00:40:96:34:dd:95
an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
an0: bpf attached
bus_explore done
sbp_post_explore (sbp_cold=2)
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ad0: setting UDMA100 on Intel ICH4 chip
GEOM: create disk ad0 dp=0xc4176b70
ad0: <IC25N040ATCS05-0/CS4OA63A> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
[0] f:80 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:16771797
[1] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/254/63 s:16771860 l:48227130
[2] f:00 typ:130 s(CHS):1023/0/1 e(CHS):1023/254/63 s:64998990 l:1044225
[3] f:00 typ:131 s(CHS):1023/0/1 e(CHS):1023/254/63 s:66043215 l:12096945
GEOM: Configure ad0s1, start 32256 length 8587160064 end 8587192319
GEOM: Configure ad0s2, start 8587192320 length 24692290560 end 33279482879
GEOM: Configure ad0s3, start 33279482880 length 534643200 end 33814126079
GEOM: Configure ad0s4, start 33814126080 length 6193635840 end 40007761919
GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s2b, start 268435456 length 1050894336 end 1319329791
GEOM: Configure ad0s2c, start 0 length 24692290560 end 24692290559
GEOM: Configure ad0s2d, start 1319329792 length 268435456 end 1587765247
GEOM: Configure ad0s2e, start 1587765248 length 268435456 end 1856200703
GEOM: Configure ad0s2f, start 1856200704 length 22836089856 end 24692290559
ata1-slave: pio=0x08 wdma=0xffffffff udma=0xffffffff cable=40pin
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
acd0: setting PIO4 on Intel ICH4 chip
acd0: <MATSHITA CD-RW/DVD-ROM UJDA740/1.03> CDRW drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
        -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
        -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
        -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
        -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
warning: KLD '/boot.good/kernel/linux.ko' is newer than the linker.hints file
Linux ELF exec handler installed
        -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
        -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
        -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
        -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
---------

Last but not least, here's the kernel config (only thing that's ever
changed is the device pcm).  I think I had to comment out the floppy drive
to avoid a kernel pannic.

#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files. 
# If you are in doubt as to the purpose or necessity of a line, check first 
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.387 2003/08/24 09:30:13 sos Exp $

machine		i386
cpu		I486_CPU
cpu		I586_CPU
cpu		I686_CPU
ident		GENERIC

#To statically compile in device wiring instead of /boot/device.hints
#hints		"GENERIC.hints"		#Default places to look for devices.

makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options 	SCHED_4BSD		#4BSD scheduler
options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_ACL			#Support for access control lists
options 	UFS_DIRHASH		#Improve performance on big directories
options 	MD_ROOT			#MD is a potential root device
options 	NFSCLIENT		#Network Filesystem Client
options 	NFSSERVER		#Network Filesystem Server
options 	NFS_ROOT		#NFS usable as /, requires NFSCLIENT
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	PROCFS			#Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		#Pseudo-filesystem framework
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	COMPAT_FREEBSD4		#Compatible with FreeBSD4
options 	SCSI_DELAY=15000	#Delay (in ms) before probing SCSI
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~215k to driver.

# Debugging for use in -current
options 	DDB			#Enable the kernel debugger
options 	INVARIANTS		#Enable calls of extra sanity checking
options 	INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
options 	WITNESS			#Enable checks to detect deadlocks and cycles
options 	WITNESS_SKIPSPIN	#Don't run witness on spinlocks for speed

# To make an SMP kernel, the next two are needed
#options 	SMP			# Symmetric MultiProcessor Kernel
#options 	APIC_IO			# Symmetric (APIC) I/O

device		isa
device		eisa
device		pci

# Floppy drives
#device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk			# ATA disk drives
#device		ataraid			# ATA RAID drives
device		atapicd			# ATAPI CDROM drives
#device		atapifd			# ATAPI floppy drives
#device		atapist			# ATAPI tape drives
options 	ATA_STATIC_ID		#Static device numbering

# SCSI Controllers
device		ahb		# EISA AHA1742 family
device		ahc		# AHA2940 and onboard AIC7xxx devices
device		ahd		# AHA39320/29320 and onboard AIC79xx devices
device		amd		# AMD 53C974 (Tekram DC-390(T))
device		isp		# Qlogic family
device		mpt		# LSI-Logic MPT-Fusion
#device		ncr		# NCR/Symbios Logic
device		sym		# NCR/Symbios Logic (newer chipsets + those of `ncr')
device		trm		# Tekram DC395U/UW/F DC315U adapters

device		adv		# Advansys SCSI adapters
device		adw		# Advansys wide SCSI adapters
device		aha		# Adaptec 154x SCSI adapters
device		aic		# Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device		bt		# Buslogic/Mylex MultiMaster SCSI adapters

device		ncv		# NCR 53C500
device		nsp		# Workbit Ninja SCSI-3
device		stg		# TMC 18C30/18C50

# RAID controllers interfaced to the SCSI subsystem
device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID
device		ciss		# Compaq Smart RAID 5*
device		dpt		# DPT Smartcache III, IV - See NOTES for options!
device		iir		# Intel Integrated RAID
device		mly		# Mylex AcceleRAID/eXtremeRAID

# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
device		ch		# SCSI media changers
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)
device		ses		# SCSI Environmental Services (and SAF-TE)

# RAID controllers
device		aac		# Adaptec FSA RAID
device		aacp		# SCSI passthrough for aac (requires CAM)
device		amr		# AMI MegaRAID
device		ida		# Compaq Smart RAID
device		ips		# IBM (Adaptec) ServeRAID
device		mlx		# Mylex DAC960 family
device		pst		# Promise Supertrak SX6000
device		twe		# 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

device		vga		# VGA video card driver

device		splash		# Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device		sc

# Enable this for the pcvt (VT220 compatible) console driver
#device		vt
#options 	XSERVER			# support for X server on a vt console
#options 	FAT_CURSOR		# start with block cursor

device		agp		# support several AGP chipsets

# Floating point support - do not disable.
device		npx

# Power management support (see NOTES for more options)
#device		apm
# Add suspend/resume support for the i8254.
device		pmtimer

# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
device		cbb			# cardbus (yenta) bridge
#device		pcic			# ExCA ISA and PCI bridges
device		pccard			# PC Card (16-bit) bus
device		cardbus			# CardBus (32-bit) bus

# Serial (COM) ports
device		sio		# 8250, 16[45]50 based serial ports

# Parallel port
device		ppc
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da


# PCI Ethernet NICs.
device		de		# DEC/Intel DC21x4x (``Tulip'')
device		em		# Intel PRO/1000 adapter Gigabit Ethernet Card
device		txp		# 3Com 3cR990 (``Typhoon'')
device		vx		# 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
device		dc		# DEC/Intel 21143 and various workalikes
device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
device		pcn		# AMD Am79C97x PCI 10/100 (precedence over 'lnc')
device		rl		# RealTek 8129/8139
device		sf		# Adaptec AIC-6915 (``Starfire'')
device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
device		sk		# SysKonnect SK-984x and SK-982x gigabit ethernet
device		ste		# Sundance ST201 (D-Link DFE-550TX)
device		ti		# Alteon Networks Tigon I/II gigabit ethernet
device		tl		# Texas Instruments ThunderLAN
device		tx		# SMC EtherPower II (83c170 ``EPIC'')
device		vr		# VIA Rhine, Rhine II
device		wb		# Winbond W89C840F
device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')
device		bge		# Broadcom BCM570xx Gigabit Ethernet

# ISA Ethernet NICs.  pccard nics included.
device		cs		# Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device		ed		# NE[12]000, SMC Ultra, 3c503, DS8390 cards
device		ex		# Intel EtherExpress Pro/10 and Pro/10+
device		ep		# Etherlink III based cards
device		fe		# Fujitsu MB8696x based cards
device		ie		# EtherExpress 8/16, 3C507, StarLAN 10 etc.
device		lnc		# NE2100, NE32-VL Lance Ethernet cards
device		sn		# SMC's 9000 series of ethernet chips
device		xe		# Xircom pccard ethernet

# ISA devices that use the old ISA shims
#device		le

# Wireless NIC cards
device		wlan		# 802.11 support
device		an		# Aironet 4500/4800 802.11 wireless NICs. 
device		awi		# BayStack 660 and others
device		wi		# WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device		wl		# Older non 802.11 Wavelan wireless NIC.

# Pseudo devices - the number indicates how many units to allocate.
device		random		# Entropy device
device		loop		# Network loopback
device		ether		# Ethernet support
device		sl		# Kernel SLIP
device		ppp		# Kernel PPP
device		tun		# Packet tunnel.
device		pty		# Pseudo-ttys (telnet etc)
device		md		# Memory "disks"
device		gif		# IPv6 and IPv4 tunneling
device		faith		# IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device		bpf		# Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		usb		# USB Bus (required)
#device		udbp		# USB Double Bulk Pipe devices
device		ugen		# Generic
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and da
device		ums		# Mouse
device		urio		# Diamond Rio 500 MP3 player
device		uscanner	# Scanners
# USB Ethernet, requires mii
device		aue		# ADMtek USB ethernet
device		axe		# ASIX Electronics USB ethernet
device		cue		# CATC USB ethernet
device		kue		# Kawasaki LSI USB ethernet

# FireWire support
device		firewire	# FireWire bus code
device		sbp		# SCSI over FireWire (Requires scbus and da)
device		fwe		# Ethernet over FireWire (non-standard!)

#mhunter sound?
device pcm